Inbound Delivery Idoc not update PIC and PGI with split batch.

Dear Experts,
Delivery outbound with split batch send to third party Warehouse to PIC and PGI from SAP, then receive the delivery inbound IDOC to update the PIC and PGI in SAP from third party. Basic Idoc DELIVERY03 it's works fine with out split batch, with split batch it's not updating PIC and PGI at the same time no error. Please advice on this
E1EDL24-HIPOS = "HIGHER LEVEL ITEM NUMEBR"
E1EDL24-HIEVW = "VALUE 1"
E1EDL19-QALF = "BAS"
Thanks and Regards,
Thiru.

Hi,
You also have to create a segment with following data as well (for batches).
E1EDL19-QUALF = "QUA".
Cheers,

Similar Messages

  • Outbound Delivery IDOC not updating values from MKPF for goods receipt

    hi all,
    I have a question say I am generating an outbound delivery IDOC. which  has fields Goods Issues & Goods Receipt date retrieve from MKPF(BUDAT).
    say when i post goods issues, MKPF is updated and  IDOC is gernerated with issues date taken from MKPF.
    and when i tried to goods receipt, MKPf is updated and IDOC is generated but no receipt date taken from MKPF. then i check in MKPF, date is there and then once again I triggered the IDOC, receipt date comes......so my doubt is the time issues say when IDOC is triggeres, no value in MKPF...but when i check the time it is 4 mins difference from the MKPF time and the IDOC time...
    and also 1 more thing for doing goods receipt, we do in different transaction and for good issue we do in Vl02n.
    so bit confused.
    kindly help

    True , but in BKPF only Issues date are stored not the receipt date say if the document type = WE.
    Please let me know is there any other options to fetch rather than MKPF.
    because at the time of IDOC generation, there is not entries in MKPF. I tried to do using WAIT UP TO 50 seconds , even that didnt work.
    Please guide me
    thanks

  • Inbound Delivery Idoc with batch split then PIC and PGI using DELIVERY03

    Dear Experts,
    Requirement to split the delivery item then PIC and PGI, while Processing Inbound Idoc using basic Idoc type DELIVERY03
    I have searched forum already but it vain. Please advice.
    Thanks and Regards,
    Thiru.
    Moderator message : Spec/requirements dumping not allowed, show the work you have already done.  Thread locked.
    Edited by: Vinod Kumar on Nov 16, 2011 5:09 PM

    Hello Finbarr
    I assume that you do NOT send any (suggested) batches to your warehouse. Otherwise you would have the same problem like we have that the WHSCON cannot overwrite a (suggested) batch.
    However, if you just send the quantity per item then the batch split is much simpler than you suggested:
    "First E1EDL24 segment:
    POSNR     50
    MATNR     000000000000602006
    MATWA     000000000000602006
    CHARG     L1519   " <<< first batch
    LFIMG     37.000
    VRKME     CT
    "Second E1EDL24 segment:
    POSNR     50
    MATNR     000000000000602006
    MATWA     000000000000602006
    CHARG     L1880   " <<< second batch
    LFIMG     37.000
    VRKME     CT
    Well, and as qualifier we use: E1EDL19-QUALF = 'XYZ'  " a dummy
    The SAP system is smart enough the realize that these two E1EDL24 segment belong to the same item yet have different batches and, therefore, yield a batch split in the delivery. The system generated the 9xxxxx numbers for this sub-item lines automatically.
    Although I believe that it is not possible to change a batch in the delivery using an inbound WHSCON I would appreciate to have a final proof of this assumption. I could imagine that if you first delete the item containing the suggested batch and then add a new item with the actual batch from the warehouse it might works. However, this would require to implement a user-exit which I do not prefer.
    Regards
      Uwe
    PS: It seems I gave an answer to the wrong question (should be EDI (DESADV): Can batches be overwritten by an inbound WHSCON (pick conf)? )

  • Partial picking and PGI (with Idoc)

    Hello
    a) We have a scenario where we would like to achieve partial picking and PGI with Idoc:
    For example
    In the delivery the delivery qty is 10 from the beginning, but we would like to pick only 7 and perform the PGI anyway. The 3 remaining units should remain open and create a new delivery with VL10 or whatever. For the picking confirmation we are using SHP_OBDLV_CONFIRM_DECENTRAL03. We are not using WM, just inventory management in this scenario.
    We know that per standard SAP functionality the picking quantity must match the delivery quantity when doing the PGI.
    b) However: we have another scenario where we run picking and confirmation from a DWMS, where all confirmations are made by the idoc type SHP_OBDLV_CONFIRM_DECENTRAL03. In this scenario, it is possible to achieve the partial picking and PGI.
    So my questions are really:
    1) Anyone knows why SHP_OBDLV_CONFIRM_DECENTRAL03 would post partial picking PGI with DWMS succesfully, and not with a "normal" scenario where there is no DWMS in use, just a normal plant/storage location?
    2) Anyone knows a suitable idoc type to achieve partial picking idoc, one where the picking qty and the delivery qty could be adjusted at the same time so that picked and delivery quantities would be exactly the same?
    3) Any suitable user exit that could be used in order to change the delivery qty according to what has been picked for the delivery? Some success stories around it would be appreciated.
    Thanks in advance,
    OT

    Hi,
    I am not able to get the details whether you want to know the information about the Inbound Idoc or Outbound Idoc. But you want to do the picking and packing of the delivery then I can presume that you are doing the Inbound process.
    In that case you can do use the process code SDPI which has the message type SDPICK. In this we have the function module SD_IDOC_INPUT_PICKING which can do the picking and PGI of delivery.
    In this you can also change the delivery quantity if you are not picking up the whole quantity from the plant. So it allows you to change the delivery quantity and then do the PGI for the same.
    Regards
    Suneet

  • Delivery Date in inbound delivery doc not accurate

    Dear all,
    I have a question with regards to the wrong delivery date appear in our inbound delivery.
    Our inbound delivery is created via a message output in the outbound delivery of a standard SAP cross company stock transport order. The delivery date in the inbound delivery is not correct from a business point of view.
    +The correct delivery date in the inbound delivery document should be [the Actual GI date field in the outbound delivery] + [transport time (i.e. route field) in the outbound delivery].+
    Either way (i.e. the Actual GI date field is later/earlier than the planned GI in the outbound delivery), the delivery date in the inbound delivery is also wrong.
    Do you have any idea? We have tried to change the inbound delivery type EL by setting a flag (i.e. X) in the rescheduling (TVLK-NEUTE), and it still doesnu2019t work.
    Please help.
    Thanks.
    Tuff

    implements SAP Note 1316614

  • Delivery Date in Inbound delivery document not correct

    Dear all,
    I have a question with regards to the wrong delivery date appear in our inbound delivery.
    Our inbound delivery is created via EDI output in the outbound delivery of a standard SAP cross company stock transport order. The delivery date in the inbound delivery is not correct from a business point of view.
    +The correct delivery date in the inbound delivery document should be [the Actual GI date field in the outbound delivery] + [transport time (i.e. route field) in the outbound delivery].+
    Either way (i.e. the Actual GI date field is later/earlier than the planned GI in the outbound delivery), the delivery date in the inbound delivery is also wrong.
    Do you have any idea?  We have tried to change the inbound delivery type EL by setting a flag (i.e. X) in the rescheduling (TVLK-NEUTE), and it still doesnu2019t work.
    Please help.
    Thanks.
    Tuff

    Does anyone know this problem?
    appreciate some feedback.

  • IPad will not send pics or imessage with update to 7.1.2

    iPad will not send pics or imessage with update to 7.1.2

    Hello Catjaj
    If you are having issues with sending iMessages on your iPad, then check out the article below for multiple troubleshooting options to get it back working again. You can try deleting the message thread and starting a new one as well as resetting the Network Settings.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    -Norm G.

  • My itunes will not update.  and i can not uninstall becuse of some supid file it cant find

    My I tunes will not update.  and i can not uninstall becuse of some supid file it cant find. hence i cant connect to my iphone now that i hav the latest software on my phone.

    and i can not uninstall becuse of some supid file it cant find.
    What's the name of the file? (Precise text, please.)

  • My iPad is not updating calendar and address book.  My iMac and iPhone are fine. What is wrong?

    My iPad is not updating calendar and address book.  My iMac and iPhone are fine. What is wrong?

    Reset the device. If it doesn't work try removing your account and adding it again. If that doesn't work then try restoring the device to factory settings by pluggin into iTunes and clicking "Restore".

  • Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.

    Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
    i might need walked through on a few things if they are too complicated.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?

    My device only displays the Diagnostic Mode screen. Don't metter what I do. I've tryed to update itunes and reestore with latest software a few times, but it always comes back on the Diagnostic Mode screen. What's wrong?

    Hi sayla,
    When you reloaded your software did you do a clean reload (deleting all data)? http://bbry.lv/bpv7DT
    If so, you might try doing a resettofactory using the following instructions. http://bit.ly/fMW9I4 This will reset to factory default.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • My phone is sharing my pics and contacts with my husbands phone, how do I turn it off

    My phone is sharing my pics and contacts with my husbands phone, how do I turn it off

    Hi cody176,
    Welcome to the Support Communities!
    It sounds like you may need to set up a different Apple ID for iCloud so that you can keep your contacts, calendars, messages, etc. separate from your husband's.
    The articles below may be able to help you with this issue.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622?viewlocale=en_US
    iCloud Help: What is iCloud?
    Cheers,
    Judy

  • I did not update my iPad 3 with the last update, will that affect me updating to IOS 6?

    I did not update my iPad 3 with the last update, will that affect me updating to the new IOS 6? Will I get all the updates I missed in the previous update if I update to IOS 6. If not, tell me where to go to get the last update before I update to IOS 6. I thought I had time before this new one came out. Thanks for any help I get.

    You can update directly to iOS 6 now. Not updating to iOS 5.1.1 does not matter. If you have updated the iPad before, you know what to do.

  • Goods Receipt of HU in an Outbound Delivery not updating HUMSEG and Hu Hist

    Hi,
       I have a pecuiliar prob ...  I am trying to do GR (MIGO) for an Outbound Dely containing HU (non HU Stor Locn), although I am able to post the article documnet. The Gr article doc doesnt get updated in the table HUMSEG and in the HU History.
       Whereas if I do the Gr for an Inbound Delivery containing HU  in the same stor location , the article docs gets updated in HUMSEG.
        Can anyone throw some light on this?
    REgards,
    BG

    HI Csaba,
       Now I am trying to create GR for Inbound Dely containing the HU through MIGO and not VL32n , it is throwing the error
    Packing can only be updated via inbound delivery dialog
    Message no. VLA311
        We are into ECC 6.0 and it seems that SAP NOte 1384533 has already been implemented , but still I dont see the VLA 311 message in System Messages under the Logistic Execution path of SPRO.
       I have been reading the SAP Note 199703, but when I set the GR Assignment field of the Conf Control to blank and remove the movt type for Dely Item Cat ELN , it doesnt allow me to create HU in the Inb Dely, although it allows me to create a GR for the Inbound Dely through MIGO .
         Can you please help me in overcoming the prob.
    REgards,
    Binayak
    Edited by: Binayak Ghosh on Jun 15, 2011 4:37 PM

  • INBOUND IDOC not updating the basic data field which is created newly

    Hi,
    i am creating an inbound IDOC for material master creation in that in basic data1 i have created 2 custom field in general data 1 is updating and another  is not updating with the value in iDOC.
    User exits codes are fine. but data is not updating.
    can some one help hw to resolve this..
    regards,
    thanigai

    Hi,
    Are you Debug the function module in  Process code of IDOC and use COMMIT WORK in that Function module.

Maybe you are looking for