Inbound Delivery Notification Document is missing EWM

Dear Experts,
Inbound Delivery document is created successfully in ECC, Prior to that PO is created in ECC which is replicated in SCM due to active integration model, based on the PO inbound delivery document is created, but it is not replicated automatically in SCM, I am not able to figure what is missing, is there any special customization is needed to send delivery document to EWM, Give your valuable suggestions.
Thanks and Regards,
Babu

Hi Babu,
1) Check whether the data is getting struck in inbound/outbound queues
2) Check is there any inconsistencies
3) Check is there active integration model for delivery documents
Regards
R. Senthil Mareeswaran.

Similar Messages

Error while activating Inbound Delivery Notification

Hi,
I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
What's missing?
I help will be rewarded.
Thanks,
Amit

Thanks Virendra,
You have pointed to the right direction. Basically, without checking for the posts here, which are really helpful, I went to system one more time only to find that I have made a configuration error. I am just sharing if anyone else in future faces same situation, he/she can be benefited out of it.
In EWM system - I had created number range with transaction SNRO for object /SCWM/SSCC putting 01 (from 1 - 1999999) as internal and 02 (from 2000000 - 2999999) as external number range.
In EWM system - I had assigned the number range in following place:
Extended Warehouse Management > Cross Process Settings > Handling Units > External Identification > SSCC Generation Acc. to EAN128 > Maintain SSCC Generation for Each Warehouse Number
In ERP system - I had created number range with SNRO for object LE_SSCC with same attributes as above. i.e. 01 as internal and 02 as external.
Now when I packed the inbound delivery in ERP system, I used packaging material for which the number range is internal (i.e. 01) and it created HU with SSCC number. Up to this all were good. But when the same HU transferred from ERP to EWM system, SAP treated the HU number coming from ERP system as external HU number (which is logical) but it was looking at number range 02 (since it was marked as external) but was failing to match as the allowed numbers doesn't fit along with the number transferred from ERP system. Hence it was giving error.
As a solution I declared 01 as external and 02 as internal and also inverted the number range assignment for SSCC generation in EWM system.
It created Inbound Delivery successfully.
Thanks all of you for helping on it.
Cheers,
Amit

Create Warehouse Request for Inbound Delivery Notification

Dear Experts,
I have created Inbound Delivery in ECC and Inbound Delivery Notification has been created in SAP EWM.
Kindly suggest me how and where can I create Warehouse Request for Inbound Delivery Notification.
I donot see any transaction or link to create Warehouse Request for the Inbound Delivery.
I am new to EWM. Please suggest.
Regards,
Shetty

Hi,
After the Inbound delivery has been distributed to the EWM environment the Inbound delivery notification (IDN) is created. So far so good but after the IDN has been created you will have to activate it manually if it didn't automatically. In order to activate it please go to transaction /n/SCWM/IDN - Maintain Inbound Delivery Notification and execute it for all of the IDNs that are not activated. Then you activate it and it creates the ID.
After the ID has been created, if the system (Post Processing Framework) didn't create the tasks relevant for receipt than you have to go into the ID and choose Inbound Delivery - Follow-On Functions - Warehouse Tasks and create and save the warehouse tasks relevant for receipt.
All the best,
Claudiu Maxim

Inbound delivery notification in scm

hi all,
i have created in bound delivery in ecc 6.0 , maintain integration model for the same for data transfer between sap erp and scm. how to create inbound delivery notification based on the inbound delivery received from sap erp.
kindly guide me out for creation of inbound delivery.
Regards,
velu

Hi,
You need to map the delivery types and item categories first.
Regards,
MdZ

Inbound delivery for Production Order in EWM

Hi
We have a scenario of creating Inbound Delivery, Pack (HU), GR and Putaway via an interface in EWM from an external system. Basically the transaction of /scwm/grpi and /scwm/prdi. I found this below thread which is little old. Could you please confirm if this is the only process or is there a better solution.
http://scn.sap.com/thread/1557452
Any useful information would help.
Thanks, Raj

Hi
There is no straight FM or BAPI to do this. Have to go by the classes and methods the standard uses to create inbound delivery. It is based on BOPF framework. See the below note for a sample program that uses the same time of coding for outbound delivery.
1414179 - Technical documents for software development in EWM
FYI, the /SCWM/INB_DLV_SAVEREPLICA, cannot be used as this is for process if deliveries gets created in ECC first and then EWM. Production receipt is the other way.
hope this helps.
Thanks, Raj

EWM - Inbound Delivery Notifi. - Error on Activation

Hi,
I have configured ECC 6.0 with EWM 5.1. I have created a delivery and distributed to SCM 5.1.
When I try to activate the inactive version in EWM, it gives me the following error
Field Item: Person Entitled to Dispose is a required field for the action HDR: Activate Document
Field Item: Stock Type is a required field for the action HDR: Activate Document
Field Item: Owner is a required field for the action HDR: Activate Document
Am I missing any configuration?.
Please let me know.
Thanks & Regards,
Sat

Hi Sathese,
could you please be so kind and let me know what your SCU was missing?
I'm facing the same error in EWM.
Thanks a lot in advance and regards,
Martin

Inbound Delivery Notification(IDN)-Activation

Hi Folks,
Hope every one is doing great. I am trying to receive material in a warehouse managed by EWM. The problem is I am not able to activate my IDN neither my PPF setting can do it automatically. When I tried to activate it, I get the following messages
Field Item: Person Entitled to Dispose is a required field for the action HDR: Activate Document
Field Item: Stock Type is a required field for the action HDR: Activate Document
Field Item: Owner is a required field for the action HDR: Activate Document
I also see that these field items are empty in IDN but I can't input it as the fields are not editable in maintain IDN tcode. I've mapped ERP plant storage loc and ERP logical system to an availability group     so I don't understand why EWM is not able to determine a stock type for the material. I have maintained warehouse product master for the material I am receiving with a party entitled to dispose, so I can't understand why EWM is not able to pull the Party entitle to dispose from the master data. I also see that in the config table where we map ERP plant to storage loc, the party entitle to dispose is blank but I can't change it. BTW, what is this Owner? Any idea folks? any kinda would be great, appreciate it.

Any pointers folks?

EWM inbound delivery

Hi all,
We are trying to reproduce an inbound delivery flow from R/3 (ECC 6.0) to EWM ( SCM release 5.1).
We created an Integration Model, and it runs in the correct way, because Product, Location and BP Data were created correctly in SCM.
Now, when we create an inbound delivery in R/3 with a Packaging material, in SCM an Inbound Delivery Notification is created, but the system does not create
in automatic way the linked Inbound Delivery in SCM, as the Sap library shows.
Running SLG1 transaction one of the error messages shown is: "HU number XXXXXXX is internal and cannot be assigned externally"
Can someone help us?
Thanks in advance
Regards,
Rossella.

Hi Antonella
Looks like the PPF actions which create the INB dely are giving an error since the HU settings are not complete. Make sure that the packing material in EWM (which is CIF from ERP and WH Product has been creared) has a valid HU type entered. Also ensure that the HU number range in EWM (external number range) is in sync with the internal number range if HUs created in ERP.
Hope this helps
Thanks
Deepak Joshi

Creation of Inbound delivery in EWM

Hi All,
I am trying to find out a way to create inbound delivery technically through a custom program.Can anybody suggest me is there any FM/BAPI or any other method to create an Inbound delivery in EWM exists?
BR,
Anil

The actual scenarois is this:
I am getting AUFNR(prodcutoin order),LGNUM(whs number) ....etc from XI system. I hav to use this data and have to create an Inbound delivery from expected GR in EWM and POST GR in EWM and Creation of Whs task in EWM again.
The transaction to create the inbound delivery from expected GR is /SCWM/GRPI (GR Preparation: From Production).
we do not have any BAPI or FM in EWM to acheive this. Pleas help me in resolving the issue.

Inbound delivery creation in WM - mapping to process type 1011 in EWM

Hi All,
I am new to EWM and have to configure handling units for picking and putaway in EWM.
I am creating an inbound delivery w.r.t Purchase order in WM and passing it to EWM. During the warehouse order creation I am packing the materials in a packing material. however, the warehouse process type is 1010 and I want it to relflect 1011.
So I wanted to know how to configure the system either on the WM or the EWM side so that when the inbound delivery is received on the EWM side it maps it to process 1011.
Arup

Hi,
To put across my question more clearly here is where I am right now. I pass the delivery to the EWM side. There I pack the materials. There is a HU association with the packing material.
When I go to the screen with the follow on functions- warehouse task. Then when I choose the handling unit tab and click on the exectute button associated with the Whouse Req then there should be a Line item displaying the handling unit that was created in the previous step.
However this is not happening and when I click on the execute button the line item does not show up.
So I was wondering if there is some configuration that needs to be done to get the HU displayed?
Arup

Inbound delivery error in SCM

Hi Experts,
While transferring delivery document from ecc to SCM, It encounters with the following error in the SCM side
Field Header: Receiving Office: Location No. is a required field for the action HDR: Save Node
Please help me to resolve.
Thanks in advance,
Pio

Problem is solved.
In my case problem was when I tried activate inbound delivery notification in EWM.
Go to in SAP Easy Access in EWM system -> Extended Warehouse Management -> Master Data -> Maintain Supply Chain Unit -> Choose your SCU and press enter. Then click on 'Alternative' tab and sure that row 'RO - Goods Receipt office' exists.

BBD in Inbound delivery

Hello,
We use the LE-TRA integration with EWM, thx to Juergen it works fine, but i need also manage a BBD in inbound delivery without batch.
My scenario:
1. Crate PO and inbound Delivery in ECC;
2. Crate Transportation document in ECC and assign Inbound delivery;
3. Create HU MTR (Means of transport) in transportation document;
4. Transfer inbound delivery and HU MTR to EWMS system;
5. Activate TU
6. Physical Goods Receipt (/SCWM/GR)
During step 6, worker should enter a BBD (Best Before Date) but field a "gray" - not ready for input in /SCWM/GR.
Incorrect logic or batch requested?

Apply SAP Note
Note 1576788 - Transfer of exp. date
(IDOC_INPUT_DESADV1) to inb. delivery
Here are the correction instructions for your reference:
=========================================
FORM DESADV_IDOC_PARSE
Delta001Context Block
        IF NOT t_dlgn-vbelv IS INITIAL.
          t_dlgn-posnv = s_dl24-posex.
        ENDIF.
Delete Block
        mv s_dl24-brgew t_dlgn-brgew.
Insert Block
        mv s_dl24-vfdat t_dlgn-vfdat.                         "n_1576788
        mv s_dl24-brgew t_dlgn-brgew.
Have fun!
- Joemil

Issue at the time of creation of transfer order for inbound delivery

Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
Nikhil

Hi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Error in inbound delivery replication ERP - EWM

Hi,
We have recently installed SAP ERP 6 EhP 6 and EWM 7.0 Ehp2 Add-On
Now, we are not being able to replicate Inbound Delivery from ERP to EWM.
As we save the ID in ERP we are getting a message that the ID has been distributed.
But the document is getting stuck in the RFC queue.
In SMQ2 the particular queue gets the status "SYSFAIL" with the error message "Function module does not exist or EXCEPTION raised. Message no. SY359"
The function module field contains "/SCWM/INB_DLV_SAVEREPLICA"
The status message says: "CREATE DATA: The document /1DF/_PDI000 is no... "
I've properly defined the standard BAPI destination and I've checked note 1398474.
Please help me get out of this mess.
Regards,
Oritra

Hi Oritra
As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
Also try to create new delivery in ECC and send... As you was checking in SMQ2 it means
"The status message says: "CREATE DATA: The document /1DF/_PDI000 is no..." it means after sending your delivery from ECC it is coming to back to the system where you are checking inbound queue and trying to create delivery.
That time it find NO range for delivery , so see number range assignment or number range maintenance and refusing to create delivery.
so update Number range and assignment properly for ID in EWM system and check new flow.
if resolved dont see below points.
please provide more infrmation of below error from SLG1. keep some extra selection time zone.
1. Do you have same or different client. As per above your description my understanding was same client (ECC and EWM).
If you have different client then your ECC WM parameter under EWM interface makes ur delivery move to EWM system with distribution model created with BAPI replica.
As I do not have ur system my second option will be try to check above setting and if not try to push in debug mode to see proper code.
As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
Regards
Suraj

Inbound Delivery Notification Document is missing EWM

Similar Messages

Maybe you are looking for