Inbound EDI/Idoc to change PO

Hello Dear Sappers,
I'm using message type ORDRSP (Idoc ORDERS05) for inbound Vendor confirmation, and it works.
Our Vendors also send price changes, quantity changes, material changes and cancellation to PO item.
Can i use ORDRSP to update my PO item? Or do i have to use a seperate message type? (PURCHG?? ORDCHG??) or a different IDOC alltogether?
Thanks in advance,
Daniel

you can use ORDERS05, we are also using ORDERS04 with out our Z extension.
and we create PO with msg type PORDCR02 with out z extension

Similar Messages

Issue with inbound EDI idocs

Hi
we are receiving inbound EDI idocs throgh third party. Third party received EDI file having 5000 transactions .
It was transalated same number of idocs text document and posted in SAP. But after 4 hours same file processed in SAP.
Third party saying they sent only once .
Is there any way in SAP file placed two times or one time .
Any table stores this information . we are using TRFC port . I know EDIF12 table but it was not used here.
Any clue on this.
Thanks

HI
ANY Clue on this issue

Regarding Inbound EDI/IDOC

Hi All,
Suppose there is a external system.Once they save a record..How will SAP get that record into Inbound IDOC??
what are the settings to be done??
Pls explain in detail??
Thanks,
Krishna.

Hi krishna,
Pleasae go throught this
Create Idoc type Transaction WE30.
Idoc type Idoc segments
Z_idoc
Create Message Type Transaction WE81.
Message type
z_mess
Assign Message Type to Idoc type Transaction WE82.
Idoc type Message type
z_idoc z_mess
Create a function module through SE37
z_idoc_input
Assign characteristic of function module BD51
Assign fn module to Idoc type and Message Type WE57
Idoc type Message type Fn Module
z_idoc z_messs z_idoc_input
Create Inbound process code and assign inbound function module Transaction WE42.
Process code Inbound function module
zcode z_idoc_input
Create a distribution Model - Transaction BD64
Create distribution model for distribution
with the message type of z_mess
Update inbound parameters of the Partner profile Transaction WE20
For the Logical system A for the above message type update the partner profile
inbound parameter and specify the process code of Zcode.
<b>Regards,
Azhar</b>

I/B EDI IDoC for Service Ent Sheet & Goods Receipt against PO SAP ECC 6.04

Hi EDI Experts ,
We Have ECC 6.04. We are planning to have inbound EDI IDoC for Goods Receipt against PO & Service Ent Sheet .
1.For Goods Receipt against PO I have identified below Message type:
MBGMCR / MBGMCR03 - Used in SRM Confirmation IDOC from SRM & SUS
WMMBXY/ WMMBID02- Messages Types - I remember used in last Project
Can anyone please suggest/confirm me , exactly which is most used and most suitable ?
2. For Service Ent Sheet inbound posting I unable to find any IDoC and never heard same.
( I learnet that from SUS Service entry posted in ECC by eSOA with PI ( XML).... or in other cases it may created using some BAPi)
What is exact fact ? Is there Service entry sheet can not pe posted by IDOC ? If yes, how ? if now, what is the best options ?
Thanks in advance.
Regards
NAP

Hi ,
In MM-SUS deployment,
Until SRM 7.0 with ECC 6.04, Service procurement using MM-SRV & SAP SUS, was not provided. But, as of “SRM 7.0, only in combination with ECC 6.04 ”, SAP standardized the “Service Procurement” scenario along with Material Procurement for MM-SUS deployment and so fully supported for Material & Services .
Please refer the Note 868192 & 1269540 and Technical scenario matrix ( criterion 18) document for details.
So for there is Enterprise Services ( eSOA) and not IDOC. Please see below messages for Services.
Create Purchase Order
PurchaseOrderERPRequest_Out_V
Outbound
Change Purchase Order
PurchaseOrderERPRequest_Out_V1
Outbound
Receives Service Entry Sheet
ServiceAcknowledgementERPCreateRequest_In
Inbound
Approve Service Entry Sheet-> Send Approval Note
ServiceAcknowledgementERPConfirmation_Out
Outbound

EDI / IDoc : While posting inbound IDocs, IDocs gets into status 56

EDI / IDoc : While posting inbound IDocs, IDocs gets into status 56 with message "EDI: Sender port in control record is invalid".
But if I reprocess the same idoc without doing any changes using RBDINPUT and select radio button to processs idocs for status 56, then it gets successfully posted.
So not getting why this stucks for the first time.
Thanks in Advance..........

i fixed this my self

Change inbound EDI order types

Hi Gurus,
Is there a transaction where in we could change inbound EDI orders from customers to process warranty orders.
Thanks
Anusha

Look at this blog..Will tell you how to troubleshoot your IDoc issues..
<a href="/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process of ALE Process</a>
Raja T

EDI idoc inbound statuses

We're running SAP in a different partition from EDI (TrustedLink) on an iSeries. I'm getting inbound documents just fine, but no inbound statuses. I see that the status documents make it over to the SAP partition but they're not visible in WE05 - so all of my successful outbound 850s are at at status of 18 & that's it. I've looked at authorities etc but am still missing something. Thanks in advance if anyone can point me in the right direction. Susan

try this
enter tcode we21,
Go to system , click on status
Then you can see the programe name , Double click on programe name, you can see ABAP editior screen.
Then you can see go to tan and click on object directry Tab.
You can see package for which object is created.
Now use tocde Smod, select F4 for enchancement , in package you can enter SED.
You can get follwing user exit
Exit name Short text
SIDOC001 Customer function for module pool EDI1
SIDOC002 CA-EDI: Exits in Function Group EDI6 (Partner Profile)
Technically all EDI-IDOC inbound and outbound programs are wirtten as FUCNTION MODUELS.In the every fucntion moudle you can find large number of user-exits.For outbound idoc after filling every segment you have a user exit like CALL CUSTOMER FUNCITON '001'.You can find by using the keyword search CALL CUSTOMER FUNCITON in that funciton module.
In inbound also you can find after every segment you can find user-exit.
For funciton module search you can search in se37 by using idoc type,For example ORDERS01 search in se37 by using *ORDERS8.
regards,
sapsd

Need to change the segment data in Inbound ORDERS05 IDOC

Hi:
I need to change sales area coming in E1EDK14 segment. I need to determine SAP sales area stored in TVARV table and pass it to the E1EDK14 segment.
I am using exit EXIT_SAPLVEDA_002. In this I am looping DIDOC_DATA and checking if segment is E1EDK14 and then writing my logic and modifying the DIDOC_DATA. I am also modfying DXBDCDATA. However the fields are properly getting populated on screen but when I went WE05 to check the IDOC the changed fields are not getting reflected in IDOC.
Please let me know where else I have to change in order to show it in IDOC.
Thanks.

Toni,
I atlast tried IDOC_DATA_MAPPER BADI and it is working fine for me.
Appreciate your help.
The following is the sample code I wrote inside the BADI.
LOOP at data into wa-data.
   CASE wa_data-segnam.
       when 'E1EDP01'.
           wa_mapp-segnum    = wa_data-segnum.
          wa_mapp-feldname   = MATNR.
          wa_mapp-value         = '000000000000115123'.
          wa_mapp-save_type = c_x.
          APPEND wa_mapp TO mapping_tab.
        MOVE 'X' TO have_to_change.   "IDOC Data have to be changed with newly determined values
        IF protocol-stamid IS INITIAL.       "Populate with atleast one value
          protocol-stamid = 'ZMM'.
        ENDIF.
        IF protocol-stamno IS INITIAL.
          protocol-stamno = '001'.
        ENDIF.
   ENDCASE.
ENDLOOP.
Thanks.

Inbound ORDERS05 IDoc - Create SD Sales Order (EDI)

I having an issue in inbound ORDERS05 IDoc processing to create SD sales order where the sales unit of measure for the material is getting lost/replaced. We are sending sales unit of measure in the E1EDP01-MENEE field, we are also sending the material UPC in teh E1EDP19 (003) segment relying on UPC material determination rules to resolve the material for the sales order. During this process of material determination the sales unit of measure is getting lost/replaced. I know as if we send the actual SAP material in the E1EDP19 segment (no material determination required) the sales unit of measure is unchanged. In this SAP system multiple sales unit of measure are maintained for each individual UPC code. Just looking for input on where to look to resolve this, config, user exits, etc..

I can't say for sure what you should be doing, as I don't know how you have setup your material master, or how your Customers order. We have some Customers that always want EAches, some that always want OUTers, then some who want whatever UOM is assigned to the GTIN (UPC) that they order, which could be one of several. We have our custom code in ZXVEDU03.
Cheers, Paul.

Shipto on Inbound EDI Order Idoc

I cannot get the inbound order idoc to select the shipto. When I map in the E1EDKA1 WE, I am getting different results (errors) depending upon whether I use the PARTN or LIFNR.
If I map in the WE LIFNR, the error message is: "Customer belongs to customer group 0002 and thus cannot be the soldto". In this scenario, I am also mapping in the AG with LIFNR.
If I map in the WE PARTN (AG LIFNR also), the error message is: "Field KUWEV-KUNNR does not exist on the screen.
My goal is to able to use EDPAR using LIFNR to select both Soldto & Shipto. I would have thought it would have been as simple as filling these values into E2EDKA1 and updating EDPAR with the corresponding values. But as you can see, this is not working for me. Is this possible? Has anyone been able to get this to work?
Thanks.

Look at this blog..Will tell you how to troubleshoot your IDoc issues..
<a href="/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process of ALE Process</a>
Raja T

ATP check for inbound EDI order

Hi Friends,
When I am creating outbound sales order then ATP check is getting executed properly & multiple schedule lines are getting creating in IDOC also (depending on the avaibility of stock).
But When I am trying to create the inbound sales order via EDI/IDOC there is no ATP check performed & multiple schedule lines are not getting created in sales order(as per the avaibility of stock which I am checkin thro So09 tcode).
ANy1 has faced smilier problem in past. If yes then please let me know how to solve this problem of ATP check.
PLease let me know as soon as possible.
Many thanks in advance
Br, Prashant

HI Frndz,
problem is solved by using following customizing settings
Customizing:
SD/function/requirement availability/availability check/default (OVZJ)
Change the field "Rule availability" to the required value. You receive a list of the possible values using the possible entries pushbutton. Rescheduling is regarded as background processing. If you want to allow partial deliveries, choose the value 'E'.

How to Send Purchase Order through EDI/IDOC.

Hi Experts,
We are using SAP ECC.5. And intending to send the Purchase Order to Supplier through EDI/IDOC and Receive the Inbound Acknowledgement.
Appreciate, if you could help me, the required Configuration details for outbound and inbound (PO & Acknowledgement).
Reg
Kumar

Hi Kiran
Many thanks for the response. It is true that by changing the message type to EDI can generate idoc. What is not clear is any other config we need to do interms of Message generation, Resubmitting failed IDOC etc..
Out requirement is that we would generate the IDOC for New and changed docs and send to external EDI converter.
Inbound, receive the IDoc and post the acknowledgement.
Appreciate, if you could forward any document link which can explain the details.
Reg
Kumar

EDI/ IDOC

Gurus
Can somebody answer my querries
1. What exactly is gapping and mapping in EDI/IDOC
2. Can anybody send me the functional specifications and test development for EDI! Meaning any specs as a functional consultant we provide EDI team for mapping .
My email ID is [email protected]
Thanks

Dear Brendon,
what you map in IDOC depends on the IDOC message type.
ORDERS - creation of a sales order
ORDCHG - change of an existing sales order
ORDRSP - confirmation/replication of the sales order
DELINS - creation of a delivery schedule in scheduling agreement
DELORD - creation of a delivery order to the scheduling agreement
EDLNOT - creation of an external agent delivery to the scheduling agreement
GSVERF - creation of a credit advice
SBINV - creation of the invoice
SBWAP - creation of debit/credit memo(requests)
INVOIC - sending the invoice
In the transaction WE60 you can see the fields to every basic IDOC type. Not all fields which could be mapped via IDOC will be transfered automatically (only some ones). All other fields can be mapped to the application with the help of numerous user-exits provided.
The most important transactions:
BD87 - to apply the incoming IDOC
WE19 - to copy / to edit the IDOC and apply this copy
WE02 - to display the IDOC
WE05 - to select IDOCs
WE60 - to see the declared IDOC fields
And here is a general information about IDOC concept in SD:
The EDI concept is intended to realize the sales and distribution process completely automatically with the help of electronical documents. These documents are sent from one customer to another, are processed mostly on the background and give a possibility to realize the sales process extremely efficiently.
If MM-customer would like to purchase the goods then he creates the IDOC of type ORDERS and send it to SD-customer. On the SD-side the IDOC is processed via the function module IDOC_INPUT_ORDERS and creates the sales order. As confirmation the SD-side can send to MM-side the Order-Response IDOC (function IDOC_OUTPUT_ORDERS). The MM-customer can every thime send a change to the existiong order, then on SD side the ORDCHG IDOC will be processed. It can change the order like in VA02. The creation of the invoice can be made via IDOC of message type INVOIC (function IDOC_OUTPUT_INVOIC).
So, the process can be realized completely automatically between SD and MM partners with the help of IDOCs: ORDERS, ORDCHG, ORDRSP, INVOIC.
That's all concerning the SD-EDI.
Additional processes in SD, where EDI are used:
1) application of delivery schedules to the scheduling agreement: IDOC of type DELINS
2) creation of a delivery order to the scheduling agreement: IDOC of type DELORD
3) creation of external agent service delivery to scheduling agreement: IDOC of type EDLNOT
4) creation of credit advice / credit memo in the frames of self-billing: IDOCs of type GSVERF, SBWAP and for external invoice creation SBINV.
It is all processes which are realized in the SD module via EDI.
There is not so much Customizing for EDI. The most entries are required by EDI for the scheduling agreement processing (DELINS, EDLNOT, SBINV). The Customizing of these processes is located in the Customizing of scheduling agreements: SPRO => Sales and Distribution => Sales => Sales Documents => Scheduling agreements with delivery schedules => Control EDI Inbound processing.
General EDI Customizing in SD is available under: SPRO => Sales and Distribution => Electronic Data Interchange => EDI messages => ...
I hope this info helps.
Kind regards,
Akmal Vakhidov
Development Support SAP, Walldorf/Germany

ALE EDI /IDOC Documents needed

Hi All,
Can any body send the ALE ,EDI and IDOC Dcouments with live examples.
My mail id is : [email protected]
Thanks and Regards,
Muralikrishna

Hi
IDOC
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
EDI
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
Refer
http://www.erpgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
EDI FLOW :
Here is some thing which helps you and here the purchase order is taken as example too..
Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
What parts of the business cycle can be supported by EDI?
Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
How does EDI get started?
EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
What is the flow of EDI?
The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
check this.
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
ALE
Application Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User: MMUSER200 (This is the logon for dist.)
Client : 200
Password: MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG100.
Receiver as LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG200.
Receiver as LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as Mechanical Engineering
Material Type as Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time: WE07.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Regards

How to place a delivery block at line item level from Inbound ORDERS IDoc?

Hi EDI/ABAP Experts,
Can anyone please tell me how to place a delivery block at line item level from Inbound ORDERS IDoc?
I tried using exit "EXIT_SAPLVEDA_001'. But there is no LIFSP field in either of XVBEP and YVBEP structures.
Can you guys throw some light. How to place a delivery block @ line item level on sales order from Inbound ORDERS IDoc.
Thanks,
Matt .

Look into the Include: LVEDAF5A that is the only place where this exit is hit... double click on the Structures and look which structure has billling block field.. and use that..
FORM CUSTOMER_FUNCTION_IDOC USING IDOC_DATA.
CALL CUSTOMER-FUNCTION '001'
    EXPORTING SEGMENT = IDOC_DATA
              DVTCOMAG = VTCOMAG
              DXMESCOD = IDOC_CONTRL-MESCOD
              CONTRL   = IDOC_CONTRL
    TABLES    DXBDCDATA = BDCDATA
              DXVBAP    = XVBAP
              DXVBEP    = XVBEP
              DYVBEP    = YVBEP
              DXVBADR   = XVBADR
              DYVBADR   = YVBADR
              DXVBPA    = XVBPA
              DXVBUV    = XVBUV
              DD_FLAG_P = D_FLAG_P
              DXKOMV    = XKOMV
              DXVEKP    = XVEKP
              DYVEKP    = YVEKP
    CHANGING DXVBAK   = XVBAK
              DD_FLAG_K = D_FLAG_K
    EXCEPTIONS
              USER_ERROR = 01.
If you are in ECC6.0 you can also use Enhancement point : INTERPRET_IDOC_ORDERS_01 SPOTS ES_SAPLVEDA. in include: LVEDAF2U

Inbound EDI/Idoc to change PO

Similar Messages

Maybe you are looking for