Inbound FM for IDOC OILBL_RECEIVEDETAIL01

Hi Gurus,
We are going to create the locations(O401), using IDOC OILBL_RECEIVEDETAIL01.
but I did not find any inbound FM and process code for the same.
Please help .
Thanks & Regards,
jitu188

Hi Sunil,
Looks like your Inbound side COnfig is still Incomplete as you are still tryint to Identify the Process Code. Pls go through below thread as it has more information regarding the enabling ALE for WorkCenter .
https://forums.sdn.sap.com/click.jspa?searchID=23909752&messageID=7198698
Pls let me know what you think.
Regards
Shital
Edited by: shital phadake on Mar 23, 2009 10:43 PM

Similar Messages

Inbound SOAP for IDoc : Register Service

Hi ,
We have a requirement where we need to post an Inbound IDoc in the R3 from a Web Service that is called from a 3rd party application, I found something in the Transaction
SALE->Basic Settings-> Inbound SOAP for IDoc : Register Service in R3 , the documentation says "You execute the report SRT_REGISTER_SERVICE to activate Inbound SOAP for IDocs." But I'm confused what needs to be done after that.
Can anyone throw some more light on the following issues :
a) where does the WSDL get stored for the IDoc,
b) how to register a particular IDoc as a web service such that it can be called from third party system.
Thanking all the experts in advance for their valuable time and help.
Regards,
Advait.

Hi Advait,
Did you get any further with this problem. I have the same issue and I don't know how to go further on this
Ron

Inbound logic for idoc

hello experts,
I have a query regarding inbound idoc.The input file is placed at application server and i need to read it and post it in SAP.My queries are:
1. In order to create an idoc using the file, we will use program RSEINB00 which will create idoc's with status 50 and then i need to link the correspiodning Function module in partner profile's inbound type and set it to automatic so that it gets posted into SAP? Is this correct? If yes, does it mean that there is no custom code needed for this case(Assuming that the FM linked in WE20 is standard)?
2. Can we dynamically process the file?Meaning, as soon as the file is placed at application server is there a way to invode the program RSEINB00 automatically
or should we run it manually ?
Please help with the process pls as it is slightly confusing.
Thanks,
Prem

yes your understanding is right and if you want the files are pulled from the server automatically then you run the report RSEINB00 in a job or you can create workflows for this.

Inbound file for IDOC processing

Hi SAP Gurus,
I want to create an IDOC by using INBOUND FILE option in WE19. Can anybody suggest, how the flat file will look like ?
FYI, my Idoc type is BBP_PCSTAT01 ( Procurement Card Statement).
Any idea ?
Thanks and Warm Regards.
Pras Durafe

This is an example of idoc with flat-file:
EDI_DC40 100000000000413988546B 2 INVOIC01 INVOIC MM E97A INVOICSNDPRN LIRS86092747 SAPITZ LS CLNTITZ100 20040210105203
E2EDK01005 100000000000413988500000000000001 USD INVO4139885
The first record indicate the header data; after this, for each segment type, the information about the segment.
If you send me your email address, I can send you a complete example file.
Gianluca

Transaction SALE - Inbound SOAP for IDOC: Register Service

Hi,
Does anyone have some information on this feature in ECC 6.0?
Ron

Hi Advait,
Did you get any further with this problem. I have the same issue and I don't know how to go further on this
Ron

Need information on how to create Idoc Inbound Interfaces for Business Sys

Hi,
I'm losing it.
Can anyone point me to some documentation or an example of how to create inbound interfaces for Business Systems in PI 7.1.
Here's the scenario
I'm working on a B2B integration process which sends inbound idocs to an ECC 6.0 system.
I've created the Business System communication component but under the Inbound Interfaces it is blank.
I want to have MBGMCR.MGBMCR03 as an inbound interface.
But I forget how to get it there.
For Business components you can just add the inbound interface.
I've already defined the Business System in the SLD pointed it to the correct Tech System, imported the idoc definitions in the Enterprise Service Builder and set up IDX1, IDX2 to ensure the metadata exists in PI.
But for Business systems the hep says that it's got to come from the SLD.
Outbound/Inbound Interfaces
For each business system, the interfaces that are installed on the business system are also entered in the SLD. These interfaces are displayed in this frame. You cannot add any other interfaces.
I know I've done this before, but I can't remember how.
Cheers,
John

Hi John ,
Please have a look at the following links which might be of help to you
PI 7.1 IDocs interfaces act as operations
http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/7933
/people/peter.gutsche/blog/2008/10/27/what146s-new-in-sap-netweaver-pi-71
There is a section in the following link on IDOC , have a look at the links in that section
https://wiki.sdn.sap.com/wiki/display/XI/ImportantBlogsand+Notes
Best Regards

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

Inbound function module for IDoc type INFRECMASS01

Hello everybody,
What is the inbound function module for IDoc type INFRECMASS01?
I tried IDOC_INPUT_INFREC (as for IDoc INFREC01), but I got the following message (B1 044): Incorrect function module IDOC_INPUT_INFREC called up
Thanks in advance
Roland

The only difference between INFRECMASS01 and INFREC01 is that repitition of the same segments. However, the standard function module is hardcoded with IDOC type INFREC01, so if you want to use the MASS IDOC copy the standard one and put in the logic to loop around and process the info records one by one.
There is no standard funtion that can process mass idoc of the info record.
Regards,
Ravi
Note: Please mark the helpful answers

IDoc Inbound Processing for CREMDM & DEBMDM

Hi experts,
I'd like to gather some feedback from you regarding the topic ERP IDoc Inbound Processing for CREMDM & DEBMDM. As you all know, there's currently no option to directly process CREMDM/DEBMDM IDocs in ERP. Currently you have to use PI for splitting the CREMDM/DEBMDM message into its related ADRMAS and CREMAS/DEBMAS IDocs.
My areas of interest are:
1) How satisfied are you with the current situation? Does the split work? Are there issues or problems in the current message handling? What are the Pro's and Con's from your point of view?
2) What would be the requirements for a CREMDM/DEBMDM handler? What would you expect? Maybe you have implemented something similar on project basis and could post some feedback?
One painpoint I'd see with a CREMDM/DEBMDM inbound is that you'll lose the IDoc Monitoring capabilities. The message split allows a single record tracing in the IDoc Monitor (as there is a 1:1 relation between IDocs and records). This changes for the mass processing. The monitor would display only the status of the IDoc and you'd need some other monitoring capabilities to check the results on record level. What are your thoughts about that? Is the monitoring important? Would the application log be a feasible solution for that challenge?
Additional comments are welcome, of course.
Best regards
Michael
PS: @ Matt, please contact me by mail. thanks.

Hello ,
Here are some other pain areas regarding the message split :
1. Complicated monitoring proess & reprocessing error idocs : We have to monitor ADRMAS & CREMAS or ADRMAS & DEBMAS during inbound processing. Also we could not find any best practices to reprocess error idocs. E.g. If ADRMAS fails & CREMAS succeeds what is the impact . Also the impact if it is reveresed. We know for sure that if CREMAS fails , vendor will not be created / updated. But we could not find specific pointers for ADRMAS failures.
2. It is a tedious process to link CREMAS with corresponding ADRMAS idoc specially when SAP maintains internal number range for vendors.
3 . The process is complicated if you are managing customer or vendor contact information with contact address . We could succesfully implement the integration but it took us a while to reach end-point.
4. Splitting really does not seem to support if ERP maintains internal number range.
5. Another major issue we observed is , if ADRMAS is under process & corresponding DEBMAS or CREMAS is posted , it fails raising the message that Account is locked. Default serialization does work in ERP system . But overlap of few microseconds also cause this error.
Hope this helps !!
Please let me know if you need any other specific details since we have used MDM - ECC integration using PI to its maximum extent .
Regards
Yogesh

Inbound for idoc INVOIC

Hi
Can anyone tell me, what inbound function module should be given for Idoc type INVOIC.
Thanks

Hi Niranjana,
Check the function modules IDOC_INPUT_INVOIC_FI,IDOC_INPUT_INVOIC_MRM and IDOC_INPUT_INVOIC_MM
Regards,
Soumya.

Segment for WBS element in Inbound Sales Order Idoc

Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit

Hello,
        As far as I know, there is no Segment / Field definition in ORDERS05 for WBS Element as it is not mandatory information to be filled in order for the Sales Order to be Complete. So, you need to create an Extension of the IDoc Type ORDERS05. For your requirement, here is the Approach I have.
1. Create an extension for IDoc Type ORDERS05 to ZORDER05 with a Custom Segment Z1EDP01 in which you'll have the Custom Field Name VBAP-PS_PSP_PNR which is the WBS Element field in VBAP Table.
2. Now, use the Customer Exit EXIT_SAPLVEDA_001 in the Enhancement VEDA0001 in which you can actually populate the Field WBS Element that would be already available in the Inbound IDoc to store it in a Work Area. As you are aware, you'll need to create a Project in CMOD for the same.
3. Export the same to some MEMORY ID 'XXX'.
4. Come back to the Selection Program for ORDER05 which is IDOC_INPUT_ORDERS in which you'll find the below CASE Statement.
    CASE xaprau.
          WHEN ' '.
            PERFORM call_va01_new_orders USING ok.
          WHEN 'Q'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Angebot
call transaction Order Entry VA01 with refer to quote number.
            PERFORM call_va01_new_orders_angbt USING ok.
          WHEN 'C'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Kontrakt
call transaction Order Entry VA01 with refer to contract number
            PERFORM call_va01_new_orders_contk USING ok.
          WHEN 'L'.
5. Now, since our Standard Order Type (VBAK-VBTYP) is 'C',
    we'll have to choose the Subroutine for the 'C' Option.
6. In this Subroutine, there is another Subroutine va01_dynpro_kopf_kaufmann_kde2 which is for populating Custom Dynpro Fields for the Sales Order. So, we need to choose the same Subroutine inside which we have to Create an Enhancement Implementation.
7. In this Enhancement Implementation (Implicit), we have to IMPORT the value of the WBS Element which was exported in the Customer Exit.
8. Check if it is initial. If it is not, then Call the Perform as below.
     IF NOT WA_Z1EDP01 IS INITIAL. "Checking if the Segment
                                                       " is Empty
   PERFORM DYNPRO_SETZEN USING 'COBL-PS_POSID' WA_Z1EDP01-ZZWBSELEMENT.
ENDIF.
9. Since the Sales Orders are posting using BDC here, by calling the above Subroutine DYNPRO_xxx, we are appending our Custom Segment / Field value to the BDC_DATA table.
10. In Step 8, I've given the Notation for Work Area. It will also be applicable when there are multiple Line Items. All you have to do is to EXPORT an Internal Table instead of Work Area and use the same here for each Line Item.
11. I've given you above procedure because I've worked on similar requirement in which I had to populate the Special Processing Indicator instead of WBS Element.
Hope it would be helpful for you.
Thanks and Regards,
Venkat Phani Prasad Konduri

User exit for IDOC inbound CREMAS

Hi experts,
I want to find a USER EXIT to change the value for vendor inbound idoc of message type CREMAS when create a new vendor or change a existing vendor. EXIT_SAPLKD02_001 is a function module can be enhanced but it cannot be called when I debug in WE19. The segment of IDOC is not extended by customazing field.
Can anyone tell me what user exit is for IDOC I can use to change the data for vendor when inbound idoc receive?

Hi panzhijun,
please check this link
http://forums.sdn.sap.com/thread.jspa?threadID=1659323
An Expert V.V.Reddy is exactly discussing about your issue on extending the FM in a Include: LKD02F01,
just have a look on this and go throw completely so u may get some solutions .
This is how somewhat i can help you , If i get any further details will let u know .
BR,
Lakshmi Rajkumar.

Problem with HU during creation of Inbound Delivery using IDoc

Hi,
When I am creating Delivery manually and perform Packing, Handling Unit information is stored in VEKP and VEPO tables.
But when I am processing through IDoc, after passing data to Handling Unit Segments E1EDL37 (Handling unit header), E1EDL39 (Control Segment for Handling Units), E1EDL44 (IDoc: Handling Unit Item - Delivery), It is creating delivery successfully but Handling Unit information is not getting stored in VEKP, VEPO tables.
Tried most of the notes 912470, 678464, 682506 and all of them say "You use the Idoc DESADV to create inbound delivery with packing data. The delivery is created, Idoc gets status 52 but the Handling Units (HUs) are missing. This is due to a program error. In case the IDoc contains segments to create HUs (E1EDL37), the IDoc processing should end in error status (51) as long as no packing data could be created.".
Need your advice whether we have to maintain any customizing for this or how to proceed with it.
Thanks in advance,
Murali.

IDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.

Inbound Delivery For Scheduling Agreement Lines using LSMW

Hi,
We need to create inbound deliveries for scheduling agreements. Our scheduling Agreements are too big with 200 lines. But the vendor used to send only few discrete lines in his ASN. Is it possible to create inbound deliveries for the Scheduling agreement using LSMW? Is there any standard BAPI or IDOC available to handle this in LSMW? Has anyone done this before?
Our requirement is as follows.
1. Create Inbound Delivery for few lines of the Scheduling Agreement
2. The delivery quantity of the inbound delivery will be a partial quantity of the Scheduling Agreement
3. Materials are batch managed and the batch number for each inbound delivery item need to be captured.
4. Vendor's ASN Number and its item number need to be captured at inbound delivery header and item level respectively.
Note: Delivery Schedule of the Scheduling Agreement is not used in the above scenario.
If you have any input, it will be really appreciated.
Regards,
SP0526

Hi,
You can give your scheduling agreement number in the field Purchase Order.
If you want select from the list, you can click on PO tree (just under create inbound delivery). There selet document category as "L". You will get the scheduling agreement list.
Regards,
Prabu

How to create one inbound delivery for multiple purchase order?

Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Inbound FM for IDOC OILBL_RECEIVEDETAIL01

Similar Messages

Maybe you are looking for