Inbound HIPAA 834: Validation error
Hi All,
We are using HIPAA 834 transaction on Oracle B2B. Outbound 834 worked well and however 834 inbound is not processed. Validation is enabled for both the transactions.
I am getting below error - Can you please help us?
Machine Info: (xyz) Validation of parameters failed. Some or all of the following parameters do not match the configured parameters in B2B: key = [ActionCode] value = [4] param = [null]
Thanks,
Kathar
Hi Kathar,
This is a known issue in 11g. If you want a permanent fix then please raise a SR with support.
To workaround this issue, please follow below steps -
1. Navigate to Remote TP --> Documents and select the corresponding 834 doc def
2. Select "Override Version Param" and navigate to "Miscellaneous" tab
3. In the textbox "Ignore Envelope Parameters", enter value "ActionCode" and save the configuration
4. Delete the existing agreement and recreate it (mandatory)
5. Now deploy the agreement and test again.
Regards,
Anuj
Similar Messages
-
We are using B2B for HIPAA 820 translation and validation.
When we disable the validate option in B2B, 820 file got generated. This generated file does not have validation error when validated against ecs file in Document editor. But when we enable the validation, we are getting below error in B2B.
State MSG_ERROR
Error Code B2B-51507
Error Text Error Brief : Transaction Identifier Code and Functional Group Identifier Code mismatch.
Error Description Error : Value of element ST01 (Transaction Set Identifier Code) does not match to value of element GS01 (Functional Identifier Code). Expected value of GS01 is 'RA' for this transaction type. Segment ST is defined in the guideline at position 0100.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 1{br}{tab}Character: 325 through 328
We tried few options like - uploading ecs file for Interchange and Group segments. Still no luck. We also raised a SR 3-6487253571 and working with fine folks at Oracle. Meanwhile, if any of our forumers can help, its highly appreciated.
Thanks in advance.Output Payload Generated if we disable the validation, it looks like it has correct values:
ISA*00* *00* ZZ77045 ZZ77045 *121205*1333*U*00501*100000065*0*P*\~GS*RA*77045*77045*20121205*1333*1062*X*005010X218~ST*820*Element-3*005010X218~BPR*I*0*C*NON******Element-50******20121212~TRN*1*Element-127~N1*PE*name~N1*PR*name~SE*6*Element-3~GE*1*1062~IEA*1*100000065~
Input Used:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:tns="urn:oracle:integration:b2b:x12/5010/834">
<soapenv:Header/>
<soapenv:Body>
<tns:Transaction-820 Type="Transaction" ID="820" Name="Payment Order/Remittance Advice" XDataVersion="2.0" Standard="HIPAA" Version="V5010X218">
<tns:Segment-ST>
<tns:Element-143>820</tns:Element-143>
<tns:Element-329>Element-3</tns:Element-329>
<tns:Element-1705>005010X218</tns:Element-1705>
</tns:Segment-ST>
<tns:Segment-BPR>
<tns:Element-305>I</tns:Element-305>
<tns:Element-782>0</tns:Element-782>
<tns:Element-478>C</tns:Element-478>
<tns:Element-591>NON</tns:Element-591>
<tns:Element-509>Element-50</tns:Element-509>
<tns:Element-373>20121212</tns:Element-373>
</tns:Segment-BPR>
<tns:Segment-TRN>
<tns:Element-481>1</tns:Element-481>
<tns:Element-127>Element-127</tns:Element-127>
</tns:Segment-TRN>
<tns:Loop-1000A>
<tns:Segment-N1>
<tns:Element-98>PE</tns:Element-98>
<tns:Element-93>name</tns:Element-93>
</tns:Segment-N1>
</tns:Loop-1000A>
<tns:Loop-1000B>
<tns:Segment-N1>
<tns:Element-98>PR</tns:Element-98>
<tns:Element-93>name</tns:Element-93>
</tns:Segment-N1>
</tns:Loop-1000B>
<tns:Segment-SE>
<tns:Element-96>6</tns:Element-96>
<tns:Element-329>Element-3</tns:Element-329>
</tns:Segment-SE>
</tns:Transaction-820>
</soapenv:Body>
</soapenv:Envelope>
Thanks! -
AIP-51505: General Validation Error - SFTP transport - validation disabled
Configuration :
internal DC with SFTP
external DC with SFTP (via proxy)
Business Protocol Custom Document over Generic Exchange
MLR 12? (patch 8703404)
3 environments have the same tip.properties
2 environments pick up and send all files successfully.
I cannot see a difference between the deployments that is causing the validation error.
[also in all three B2B's are an ebXML and AS2 trading partner configuration]
The 3rd generates validation errors for all files (14) in the b2b.log and sends some (1-7).
Note that the sent ones change, if a failed one is retried in the source directory, sometimes it is sent successfully.
In the failing/validating deployment there is no validation for (cut and pasted from UI screens) :
Document Protocol Revision Details = Translation Enabled False Validation Enabled False
Document Types (Document Definition Details for each document def) = Is Translation Enabled False Is Validation Enabled False
tip.properties (environment where error occurs) :
#valid valudes for DiagnosticLevel:
#DEBUG, INFORMATION, WARNING, ERROR, FATAL.
#default logging level
oracle.tip.DiagnosticLevel = ERROR
#default component log level for B2B Engine
b2b.oracle.tip.DiagnosticLevel = ERROR
# following logging properties to be set back to false after resolving Sequence 98
# oracle.tip.adapter.b2b.logPayload = true
# oracle.tip.adapter.b2b.packaging.logDecryptMessage = true
b2b.oracle.tip.DiagnosticLevel.Repository = ERROR
b2b.oracle.tip.DiagnosticLevel.BusinessLogicLayer
b2b.oracle.tip.DiagnosticLevel.B2B
b2b.oracle.tip.DiagnosticLevel.ModelValidation
b2b.oracle.tip.DiagnosticLevel.ValidationRule
b2b.oracle.tip.DiagnosticLevel.TechStack
b2b.oracle.tip.DiagnosticLevel.Deployment
b2b.oracle.tip.DiagnosticLevel.Reports
b2b.oracle.tip.DiagnosticLevel.UI
#default component level logging for UI
ui.oracle.tip.DiagnosticLevel = ERROR
#specify component log leel to override default;
ui.oracle.tip.DiagnosticLevel.Repository = ERROR
ui.oracle.tip.DiagnosticLevel.BusinessLogicLayer
ui.oracle.tip.DiagnosticLevel.B2B
ui.oracle.tip.DiagnosticLevel.ModelValidation
ui.oracle.tip.DiagnosticLevel.ValidationRule
ui.oracle.tip.DiagnosticLevel.TechStack
ui.oracle.tip.DiagnosticLevel.Deployment
ui.oracle.tip.DiagnosticLevel.Reports
ui.oracle.tip.DiagnosticLevel.UI
oracle.tip.adapter.b2b.encoding=UTF-8
# Diagnostic Service defaults
oracle.core.ojdl.OrganizationId = oracle.com
oracle.core.ojdl.ComponentId = tip
oracle.core.ojdl.HostingClientId = beta
oracle.core.ojdl.BufferSize = 100000
oracle.core.ojdl.FlushInterval = 5000
# Specific diagnostic settings
oracle.tip.LogDirectory = /space/sw/oracle/products/ias/b2b/ip/log
oracle.tip.LogMaxSegmentSize = 10000000
oracle.tip.LogType = text
# option to save old log when rebounding the service
oracle.tip.LogSave = true
# B2B Info
oracle.tip.adapter.b2b.NumOfWFListeners = 1
oracle.tip.adapter.b2b.NumOfIPListeners = 1
oracle.tip.adapter.b2b.WFAgentName = OUTAGENT
oracle.tip.adapter.b2b.RMIPort = 5111
oracle.tip.adapter.b2b.RMIInstance = IP
#oracle.tip.adapter.b2b.WalletLocation = file:/etc/ORACLE/WALLETS/oracle/ora_wallet.txt
oracle.tip.adapter.b2b.ContinueValidationOnError = true
oracle.tip.adapter.b2b.MultipleIdentifications=false
oracle.tip.adapter.b2b.allTPInOneDirectory=true
oracle.tip.adapter.b2b.DocumentRouting=false
#oracle.tip.adapter.b2b.edi.identifyFromTP = Interchange | Group | Exchange
#oracle.tip.adapter.b2b.transportTrace = /space/sw/oracle/products/ias/b2b/ip/log/transport.trc
#oracle.tip.adapter.b2b.edi.ignoreValidation=InterchangeReceiverID,InterchangeSenderID,GroupReceiverID,GroupSenderID,GroupSenderQual,GroupReceiverQual,InterchangeSenderQual,InterchangeReceiverQual
#report Certificate validation as ERROR or WARNING; default value is ERROR
#oracle.tip.adapter.b2b.tpa.validateCertificate= ERROR | WARNING
#oracle.tip.adapter.b2b.document.NoValidation = inbound | outbound
# HTTP Proxy Host and Proxy Port
oracle.tip.adapter.b2b.ProxyHost =
oracle.tip.adapter.b2b.ProxyPort =
# MaxCachedSessions is set to 0 means no ExecutionContext
# is stored in HTTP session (IP cache is empty).Line below overwrites default
# value equals to 5 when 5 concurrent users could store context in their sessions
# By commenting that line you might turn IP cache on.
oracle.tip.ui.MaxCachedSessions = 0
# Suppression of Validation Warnings
oracle.tip.buslogic.validation.SuppressWarnings=false
# Callout directory
oracle.tip.callout.directory=%s_calloutDirectory%
# persistence directory
oracle.tip.runtime.persistence.dirName=%s_persistenceDir%
# enable ONS reverse ping
enableONS=true
# Optional property which user can set to specify saved report encoding e.g. UTF-8, UTF-16LE etc
# By default this property is not set, in this case the saved report csv file
# will be generated by using the native encoding
# Users can set this parameter to change the encoding of the generated saved report csv file
#savedReportEncoding=UTF-8
# Please don't modify the following properties
# Connection Info
username=%s_intgDBUser%
password=%s_intgDBPasswd%
#connect=jdbc:oracle:thin:@%s_intgDBHost%:%s_intgDBPort%:%s_intgDBSid%
drivertype = thin
tnsentry = inst1
host = %s_intgDBHost%
port = %s_intgDBPort%
sid = %s_intgDBSid%
oracle.tip.connection.useRepositoryAPI=on
oracle.tip.connection.oraclehome=/space/sw/oracle/products/ias/b2b
# property specific to Deployment
oracle.tip.deploy.workflow_username=%s_wfUsername%
oracle.tip.deploy.workflow_passwd=%s_wfPasswd%
oracle.tip.deploy.workflow_tnsname=%s_wfTnsname%
# UI user authorization
authorization = true
# encryption key used for securing secrets in the schema.
oracle.tip.security.key=Be8ejb7yOX3rSefEr5pxBl49WLc0Iej9VeI8jykdjRfv
##oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet
#oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/101202/ib/Apache/Apache/conf/ssl.wlt/default/b2bwallet
oracle.tip.adapter.b2b.WalletLocation =file:/sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet/ewallet.txt
# performance best practices
oracle.tip.adapter.b2b.sleepTimeout=1
oracle.tip.repos.RowSize=100
oracle.tip.adapter.b2b.receiveTimeout=1
oracle.tip.adapter.b2b.TPACache=true
The b2b.log from the failing environment has some lines not seen in the other two environments (the lines referring to MimePackaging:unpack) :
2010.04.29 at 19:07:14:295: Thread-11: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_ENVSTATUSES.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt
timestamp:Thu Jan 15 09:29:53 PST 1970
2010.04.29 at 19:07:14:295: Thread-11: BusinessLogicLayer - (DEBUG) New ExecutionContext has been created
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) Recieve a new PersistencyService
2010.04.29 at 19:07:14:299: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Design
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) A new PersistencyService is created
2010.04.29 at 19:07:14:340: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2010.04.29 at 19:07:14:342: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:343: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createDataStorage
2010.04.29 at 19:07:14:345: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createDataStorage
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2010.04.29 at 19:07:14:359: Thread-11: B2B - (DEBUG) DBContext commit: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Push Stack: queryWireMessage
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Leave
2010.04.29 at 19:07:14:365: Thread-10: BusinessLogicLayer - (DEBUG) Pop Stack: queryWireMessage
2010.04.29 at 19:07:14:365: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2010.04.29 at 19:07:14:366: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2010.04.29 at 19:07:14:367: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2010.04.29 at 19:07:14:367: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2010.04.29 at 19:07:14:369: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Exit
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange SOAPAction is [null]
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@391da0
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_ENVSTATUSES.txt
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - ENVSTATUSES
2010.04.29 at 19:07:14:373: Thread-10: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:408)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1477)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2576)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2446)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2401)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=SA_ENVSTATUSES.txt, filesize=1, file_ext=.txt, filename_format=%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt, fullpath=/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt, timestamp=Thu Jan 15 09:29:53 PST 1970}
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error informationThank you for the suggestion, unfortunately, I cannot get it to work.
I've updated the IDC transport server to 3 different filename_formats, and tried the corresponding files, with correct names to match the filename_format.
After updating the IDC I validated the trading partner (host).
I then updated the agreement using the updated IDC, and validated the agreement.
I then validated the host again.
Then I created a new deployment.
And still received the error.
I then deleted the old IDC and created a new IDC and new agreement and new deployment, trying 3 different "Internal delivery channel filename format" values (updating and validating the agreement and host trading partner each time).
And still received the error.
No matter what I set EITHER the IDC "filename format" OR "Internal delivery channel filename format", the b2b.log always reports :
filename_format = %TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
e.g.
2010.05.16 at 18:05:02:758: Thread-15: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_DRUGS_10.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_DRUGS_10.txt
timestamp:Thu Jan 15 09:54:18 PST 1970
When I try a file with a revision number, e.g. SA_DRUGS_10.txt the log shows :
2010.05.16 at 18:05:03:602: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TIMESTAMP - 10
2010.05.16 at 18:05:03:895: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
which makes sense as "10" is not a timestamp.
If I exclude the revision, using SA_DRUGS.txt the log shows :
2010.05.16 at 18:27:03:543: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_DRUGS.txt
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:27:03:545: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
So, the timestamp gets ignored (as there is no "_" delimiter), but it still fails, probably because there is no timestamp in the filename.
So, why won't the UI correctly set the IDC filename_format or Internal filename_format ? -
Validation errors detected in form. when running a task
Hi All,
We are working on a large scale deployment that involves creating, modifying, deleting, etc. users utilizing ActiveSync processing in Sun IdM 7.1
But for some reason, everytime we run a user through ActiveSync processing, we are receiving the following error message:
com.waveset.exception.FormValidation: Validation errors detected in form.
My guess is that either the ActiveSync form is corrupted or maybe the default user form.
I have rolled back to prior versions of our custom ActiveSync form, but it has not solved the problem. I have checked the ActiveSync logs looking for a missing required field, but no errors show up there.
I cant seem to find the form that this validation error is occuring on. I have tracing set up on level 4, and it doesnt seem to point me in the right direction.
Any advise or experience with this error message would be greatly appreciated.
ThanksI have the similar problem. Do you have solution yet?
com.waveset.exception.FormValidation: Validation errors detected in form.
+ at com.waveset.util.WavesetException.checkBreakpoint(WavesetException.java:366)+
+ at com.waveset.util.WavesetException.<init>(WavesetException.java:85)+
+ at com.waveset.exception.FormValidation.<init>(FormValidation.java:39)+
+ at com.waveset.object.ViewMaster.runExpansions(ViewMaster.java:981)+
+ at com.waveset.server.ViewMaster.runExpansions(ViewMaster.java:626)+
+ at com.waveset.object.ViewMaster.runExpansions(ViewMaster.java:941)+
+ at com.waveset.object.ViewMaster.checkinView(ViewMaster.java:723)+
+ at com.waveset.session.LocalSession.checkinView(LocalSession.java:709)+
+ at com.waveset.ui.util.GenericViewSource.checkinView(GenericViewSource.java:522)+
+ at com.waveset.ui.util.GenericEditForm.process(GenericEditForm.java:593)+
+ at com.ibm._jsp._wsibupdateprofile_5F_workItemEdit._jspService(_wsibupdateprofile_5F_workItemEdit.java:470)+
+ at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:91)+
+ at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)+
+ at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1572)+
+ at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1521)+
+ at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:113)+
+ at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:82)+
+ at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:759)+
+ at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:121)+
+ at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:204)+
+ at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:89)+
+ at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1924)+
+ at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:112)+
+ at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:472)+
+ at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:411)+
+ at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:101)+
+ at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:566)+
+ at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:619)+
+ at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:952)+
+ at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1039)+
+ at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1471)+ -
Validation error 'Item not found' in Middleware
Hi,
In the middleware monitor, I have some bdocs failed with the validation error ' Item was not found. Validation error occured. module CRM_DOWNLOAD_BEA_VAL, BDoc Type BEABILLDOCCRMB'.
When i look at the document numbers associated , they do exist.
It is in this state for a long time.
Can anyone help.
Regards,
PratimaHi Venkat,
There are no messages in the outbound or inbound queue releated to these bdocs.
These bdocs exist only in the monitor with validation error.
Regards,
Pratima -
Read-only radio group losing value on validation error
It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
Is this a bug or am I simply missing something?
Apex 3.1.2
Rgds/Mark M.It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M. -
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
How do you resolve Financial Management service validation error in EPM ?
Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
Environment:
Quad-Core AMD Processor 2.2 GHz (Server Machine)
5 GB RAM
Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
Application Server:
WebLogic Server 9.2 Custom Installation (with Add-Ins)
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Database:
Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
http://www.oracle.com/technology/software/products/database/index.html
Hyperion EMP System 11.1.1.3:
Installer
Foundation Services (4 Files )
EMP Architect
Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
The following are the sequences of steps carried out during the Installation and Configuration of EPM:
1) Installed the Server along with its respective SP2 – Shutdown the machine
2) Assigned IP and DNS addresses
3) Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
4) Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
5) Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
6) Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
7) Logged into database and acknowledge the licensing window – Shutdown the machine
8) Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
9) Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
10) At the end of installation window, I carried out the configuration in the following scearios:
Scenario 1: Configuration all at Default settings
Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
Financial Management:
FAILED SVR: HFM Service Validation Check if HFM service in working state.
Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
Recommended Action: Make sure HAT utility is working. 1 s
I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
I have downloaded the files from following URL:
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
Many Thanks
BT
Edited by: user8973921 on 13-Apr-2010 05:08
Edited by: user8973921 on 13-Apr-2010 10:56
Edited by: user8973921 on 14-Apr-2010 02:30I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413; -
All,
I am getting below error message from log file after Invoice Validation program error out, please advise.
I could not search on "ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124" search, but found other errors and able to see we are very much higher file version than the note id advised.
Please help any one for this issue.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APPRVL module: Invoice Validation
Current system time is 01-MAR-2013 03:40:12
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_option='All'
p_inv_start_date='2013/02/01 00:00:00'
p_inv_end_date='2013/02/28 00:00:00'
p_trace_flag='N'
p_commit_size='1000'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00101: Error occured in BATCH_APPROVAL()
MSG-00102: Error Code : -20001
MSG-00103: Error Message : ORA-20001:
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
MSG-00000: When Others:User-Defined Exception
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00101: Error occured in BATCH_APPROVAL()
MSG-00102: Error Code : -20001
MSG-00103: Error Message : ORA-20001:
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
MSG-00000: When Others:User-Defined Exception
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Fri Mar 1 03:40:15 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 42770000.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 01-MAR-2013 04:06:57
---------------------------------------------------------------------------Please post the details of the application release, database version and OS.
Please also see these docs.
Invoice Validation (APPRVL) Errors Out With ORA-20001: APP-SQLAP-10000: ORA-00060 [ID 1460249.1]
R12: Invoice Validation Is Failing When Running With Parameter 'ALL' [ID 1115016.1
R12 Payables Invoice Validation Error: Unexpected error occurred during Tax Calculation. [ID 961182.1
Ap Invoice Validation Errors: P-1419: Msg-00101: Error Occured In Batch_approval [ID 1140828.1]
Invoice Validation Error : REP-1419:ERROR OCCURED IN BATCH_APPROVAL() [ID 1120213.1]
R12: Validate Invoice Errors APP-SQLAP-10000, ORA-01403 and ORA-20001 [ID 1308869.1]
Thanks,
Hussein -
Crystal report for visual studio 2010 data source object is not valid error
Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David. -
Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment
I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
Abort Retry Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC ALASKA
A M I
FACP ALASKA
A M I
HPET ALASKA
A M I
MCFG ALASKA
OEMMCFG.
SSDT AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned. 0
unindexed files recovered. CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
43468 KB in 21139 indexes.
0 KB in bad sectors.
253139 KB in use by the system.
65536 KB occupied by the log file.
1905048300 KB available on disk.
4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts. -
Calendar Component and validation errors
Hi,
For the first time I am trying to use the Calendar component to insert a date field in my SQL Server db.
The problem: I can insert a date column only if its of type java.sql.Timestamp.
As Timestamp extends the date object..
I tried to bind the selectedDate field as <Timestamp> Object[refractored in my class file] and when i tried to update by DB it throwing a Validation error.
If I bind it as a Date Object directly I am getting an EvaluvationException
as date objects cannot be inserted directly
Am i missing something here or is there a proper way of implementing it.Its a fairly direct question about object conversion problem in creator
Basically the selectedDate parameter of the JSC Calendar component
needs to be pointed to a Date Object
If we need to insert that date information to a SQL Server column the equivalent data type should be java.sql.Timestamp which extends Date.
So if we point the selectedDate parameter as a Timestamp object the creator throws an illegal argument exception.
Can some one clarify how to resolve this issue? -
How to delete empty row without validation error in ADF Table(EMP)
Hi Everyone,
I am using EMP Table in ADF jspx page to insert the data into database.when i insert a row into table by createInsert operation,it inserting the row.But I need to delete that row immediately with out entering any value.
But it showing some validation error at empno.Is there any ways to delete the empty row?if not,what are the reasons that we can't delete the row.
could any one tell me the reasons!!
Thanks in advance!!
With Best Regards,
Amar
Edited by: 973755 on Dec 11, 2012 6:42 AMAmar,
I am little confused with your logic here.....
but if you are trying to remove the row by clicking Remove button, you can set the immediate property to true and that remove function will run without executing any entity validation.......
-R -
How to track a validation error in PL/SQL
Is there a way in PL/SQL to track the fact that a page is rendered after a validation error?
I know there is condition type "Inline validation errors displayed" but
I would like to "translate" in PL/SQL expression. In case I would combine it with other PL/SQL expressions.
Thanks,
MarcoI try to show/hide a div depending on the occurence of errors. I resolved this problem by doing this in javascript.
function showEdu(){
$("#edu").animate({ height: 'show', opacity: 'show' }, 'slow');
$s('P6_EDU_SHOWN','Y');
function hideEdu(){
$("#edu").animate({ height: 'hide', opacity: 'hide' }, 'slow');
$s('P6_EDU_SHOWN','N');
function checkEduError(){
if($("span").hasClass("errTxt") == true)
{showEdu();}
else
if($v('P6_EDU_SHOWN') == 'Y')
{showEdu();}
else
{hideEdu();}
} -
B2B-51507 - Payload Validation Error - while creating VDA -4913V3
I created a document definition under Positional Flat file for VDA-> 4913V4. I created ecs file using the Document editor and created the xsd. I used both these files in creating the Document definition. In the document definition, under identification tab, I have these values.
Identification Value -> empty
Identification Start Position -> 0
Identification End Position -> 128
And I created a Partner Agreement using this Document Definition. I created a channel to send the document to GXS Mailbox.
In the agreement if I have both Validate and Translate checked on, I am getting an error which is show in the reports->Business Message.
Error Code B2B-51507
Error Description Machine Info: (RRDV2SOA) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Payload validation error.
If I have only Translate checked on, I am not getting any error, but the message that is sent to GXS is zero bytes.
If I leave both Validate and translate unchecked, the xml is sent to GXS but not the native Format.
I took the payload from the business message and validated and it looks correct.
I am using the sample data that is already validated in the B2B Document Editor using Data Analyzer.
Can you help me on this. I am not sure what I am doing wrong. If needed I can send you the ecs, xsd, and B2B partner definition export zip file to your email address.
Here is the logfile for this error.
[2011-04-06T21:00:41.652-07:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1a33f088] [userId: <anonymous>] [ecid: 0000Iwi7c0MCcpiF_7I7S61DVcAD0051W4,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 4e45f5dff566a29f:-335a9823:12eb62ea520:-7ffd-000000000000008c] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Exit
[2011-04-06T21:00:41.653-07:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1a33f088] [userId: <anonymous>] [ecid: 0000Iwi7c0MCcpiF_7I7S61DVcAD0051W4,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:-335a9823:12eb62ea520:-7ffd-000000000000008c] Error -: B2B-51507: Payload validation error.: Error -: B2B-51507: Payload validation error.[[
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:835)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1326)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:798)
... 11 more
Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:798)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1326)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-51507: Payload validation error.: Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:835)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1326)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:798)
... 11 more
Thank you
Krishna.I selected the option "Save guideline before exporting". I am guessing it is failing on the main element of the xml message because of some namespace issue. I am generating the XML using xsl transformationin BPEL and sending the XML payload to B2B Service.
Is there a way to know what part of the XML is erroring duing the validation on the server. The error message is not helpful even I turned on Trace 32 level.
Any ideas?
Thank you
Krishna
Maybe you are looking for
-
how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version
-
I have a weird phenomenon on my iMac 2G 24": When I click on a URL link in Safari or other apps it takes an inordinate long time to retrieve the page with the water wheel running without interruption. However, when I stop the retrieve and instantly c
-
Keynote on iPad to won't go into presenter mode
I have an iPad 2 (latest iOS 6) and an Apple 30pin VGA adapter that connects to an external projecter that I have very sucessfuly used in the past to present slides with presenter notes. I updated the Keynote app to 1.7.2 (latest version) last week.
-
Configuration Cisco SG200 livebox 2 NAS
Bonjour j'ai pas mal cherché la solution par moi même mais j'avoue sans résultat concret Je dispose de : Un switch Cisco SG200 Une livebox 2 sagem (avec TV) Une borne Airport Express Un NAS Une maison avec 12 prises Mon probleme : en gros rien ne mar
-
Install Software update install Office updates?
Hi , Does 'Install software update' task in configuration manager installs office patches or just OS pacthes? I have Office patches (around 100 ) software update group is advertised\deployed to my build and capture machine. Once machine is build, i