Inbound idoc error in the source system

HI,experts
I manually configurate the idoc type ,message type ,etc between the BW system and r/3 source system when the automatic program encouters errors. And the communication between BW and source sysyem seems ok since the source system is activated successfully in BW side.
But when I check the inbound the idoc in source system after i triggerred a full load for the datasource 0FI_GL_4,an error occurs in the inbound process in R/3. There is no control information in the idoc which message type is RSRQST.
how can i figure this issue out ?could anyone help me ?

HI,ALL
Thanks for your replies and documents.
Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ?

Similar Messages

No Idocs arrived from the source system.

Dear All,
Please read this issue carefully.
Error Message is that
"No Idocs arrived from the source system."
In the Details Tab:
Trasnfer( IDOCS &TRFC):Missing Messages or warinings.
Request IDOC:Application Documnet posted from BW side and it is green..There is a request BW IDOC number sent to R3.
Where as an InfoIdocs 1:Sent not arrived :Data passes to the Port is ok.
Here i can see there is one idoc frm OLTP R3 side ansd no incomming idoc for BW side
I went to r3 side bd87 and found that idoc is posted well with status 53.
This is happing in Bw for each iinfopcakage is running?

Hi,
go through this link...
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=noidocsarrivedfromsource+system&adv=false&sortby=cm_rnd_rankvalue]
System.-> Check RFC connection and clear/process stuck IDOCs.
Idocs Missing or No Idocs arrived from source
For this check the TRFC que(SM58).If any Idocs r strucked up there execute them manually.checkin sm58 transactions, you can check the status of your Idocs using BD87 in R/3. Idocs may not be processed because of load on system. You can process them manually from context menu.
And go to BD87 to process the idoc's ..
check which idoc has to process...select the idoc and click process ..Then It will push the data into the data targtes,
Hope it will help you;
regards,
NR

R/3 connection to BIW - No Idocs arrived from the source system

Question,
Hi Team,
I have issues during loading attribute data from R/3 source system to BI,
I go to the path
Data Warehousing Workbench - Modeling window. In the DataSources view, my application component Group ##. On my DataSource i Create Info Package and save it,
Later I select the following options
Full Update = select
On the Processing tab page, select only PSA.
On the Schedule tab page, choose Start Data Load Immediately and start the data load.
Till here everything is in active version and saved, and connection to the source system is active and working fine.
However when I do loading I received following messages, what I observed in Monitor window,
Data was requested OK
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
When I go to detail tab, under transfer section, I receive the following message
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
But when I actually go to PSA maintain section and select data and no of records, I can see the that data is loaded into PSA section,
But when I chose to run the transformation I donu2019t get data here,
Kindly help me to resolve this issue,
Regards,
BluSKy

Hi,
the BIW i am using , its compact BIW, which is in EXI, and i execute transaction /nrsa1 to go biw development workbench,
i am not sure about transactions settings about r/3 side,
could you plz throw some light on this issue,
regards
blusky

Conversion factor error in the source system

Hi All,
I got conversion factor error in the source system, when i tried to load maste data.
can anybody help me in. It is urgent please...
Thanks in advance
Narendra

Hi...Post the error
Regards

Error in the Source System...

Hi
RSA1-->Source System >(Context Menu)> Check
Error:
The BW IDoc type ZSBA011 is not the same as the source system
IDoc type ZSBD012

Thanks

Hi BW KING,
This error due to RFC connect is not there between BW to Sorce system.
OR else There is RFC connection mis match.
You have to ask the BASIS People to correct the RFc connection between BW to your source system.
Other wise data will not get it will show RFC connection Failed.
Thanks,
kiran.

Error in the Source system while data loding through Process Chain

Hi,
I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
Regards,
Javed

Hi..
It means that the extraction job is failing in the source system..
Please check the Job log in the source system --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
Look there may be multiple reasons behind this....
1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
2) Or may be work processes are not available and due to which jobs are failing due to time out...
In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
Regards,
Debjani..

Trfc error in the source system

Hi,
I got an error as trfc error in the souirce system,How to proceed regarding this.How to check RFC connections.What are the transaction codes for trfc and to check rfc connections.. please let me know.
Many Thanks

Hi,
We are having some problems.
While loading the data in BI 7.0 from R/3 ECC 6.0, sometimes (not always) IDOCs are getting stuck before coming to BW System.
The job always finishes successfully from R/3 side but before coming to BI, IDOCs are getting stuck and we manually have to push them into BI System.
How to avoid the situation of IDOCs getting stuck and what could be the possible reasons.
Please guide.
Thanking You,
Tarun Brijwani.

BE3.5 : Error from the source system while activating the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers!

How to Test, Inbound idoc ,with out the Sender System, using a Text File

Hi Guru's .
we wanted to test BLAORD03 inbound idoc (Message Type BLAORD).with out the SENDER SYSTEM.
on the same client.
we wanted to test this idoc with text file from our local machine.
Can anyone give us detail steps.like how to create File layout
with Segment name,and values for the fields.how to pass this file to the system.
Thanks in advance.

Hi Aparna.
My requirement is to test the idoc with Inbound File.
Generate a file with the data entered through segments through we19 ,and use the same file for processing through we16.
when i am trying to do this syst complaing about
Partner Profile not available, and some times
port not available. and some times with
'No further processing defined'.
but i maintained part profiles and port perfectly.
Can you help me in testing with test 'File' port.

Error in the source system for fiscal year variant K4 Period 00

We are experiencing the following issue when loading data from module Flexible real estate RE-FX CASHFLOW CUBE OREFX_C06 Error in source system Fiscal year variant K4 is not defined for the period 00.

Hi,
You need to check in your source whether you have maintained Fiscal Yr Variant or not? Talk to you Functional person before you do the BI Extraction.
In Table T009B
You can check Fields
MANDAT - client
PERIV - Fiscal Year Variant
BDATJ - Posting date YYYY
BUMON - Posting date calendar month
Check Table T009B and see if you fiscal variant is maintained for all periods of Years (as per error its not). maintain the same in Source system and transfer Global settings in BW to copy the same into BW system.
@AK

Processing error occured in the source system

Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message proceesing error in the source system.
In the source system apllication log the following warning message displyed.
No assignment of payroll data to BW month for country grouping 99.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for long.
If any one come accross this , please provide good inputs....
Thanks & Regards
Kumar

I have the same problem.
The following text is ment to help me.
Havent solved it yet, but explects to find the activity 'Assigning the Payroll Data to BW Month' in spro.
best regards
Ingrid
Message no. HR_BW_PY99026 Assigning the Payroll Data to BW Month.
Diagnosis
No assignment is specified for country grouping 20 in the Customizing activity "Assigning the Payroll Data to BW Month".
System Response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.

Restoring the source system connection in BW

Hi all,
Ive been trying to upload data for 2 of my infocubes, and the extractions are bouncing. The message in R/3 is told me to check the connection. The RFC are fine. But when I tried to restore the source system connection (RSA1 in BW), it sent me the following error messages:
1.- Basic type ZS 118 does not exist.
2.- The following error in the source system:
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
The description in each error is:
Error #1:
Diagnosis
    IDoc type ZS 118 could not be found.
System response
Procedure
   Please enter an IDoc type that exists.
Error #3:
Diagnosis
    Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
System response
    Error when sending data to BW.
Procedure
    Enter IDoc type ZS 118 .
They told me this IDocs are created automatically by the connection. Is that true?
How can I fix this, so that I can restore my connection and do the data extraction?
Thanks a lot
Regards,
Vic

Hi Victor Tostado
1.- Basic type ZS 118 does not exist.
Type Transaction WE30. Check iDoc types Obj. Name : RSSEND -> press F7
a.) Enter 'RSSEND' in the Obj. Name field. You will see an entry similar to the one below:
          RSSEND                          Data transfer from the source system (template)
                [-] E1RSSH               Data transfer IDoc: Header information
                         [+] E1RSHIE    Data transfer Idoc: Hierarchy header information
                                E1RSTXT   Data transfer IDoc: Texts
     b.) Enter RSREQUST in the Obj. Name field. You will see an entry similar to the one below:
            RSREQUST                    Data request to the source system
                 [-] E1RSRH               Data request IDoc: Header segment
                         [+] E1RSRHI     Data request IDoc: Hierarchy
                         [+] E1RSRTX    Data request IDoc: Texts
                         [+] E1RSRMD   Data request IDoc: Master data
                         [+] E1RSRIS      Data request IDoc: InfoSource
     c.) Enter RSINFO in the Obj. Name field. You will see an entry similar to the one below:
            RSINFO                         Info IDoc
                [-] E1RSHIN             InfoIDoc: Status segment
                        E1RSPIN            InfoIDoc: Data packet segment
                        E1RSEIN            InfoIDoc: Error segment
d.) If any of the above do not exist, contact your BASIS Team.
2.- The following error in the source system:
Type Transaction SM59. Maintain RFC destinations
a.)     Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding your source system d.) Logon Information should contain source system client and name & password for you remote logon.
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system
Type Transaction WE21. iDoc Processing Ports.
receivers port is not available go to WE21 -> create port
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 versiond. RFC Destination should be one created in SM59. If non-existent then create one.
I) Type Transaction SE16. Data browser (for R/3 -> BW Connections)
Enter RSBASIDOC Print out copy of all entries in table.
II) Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOC table for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missing entries.
Regards
Sangram Sutar

IP failed due to errors in CRM source system

hi
After executing IP full load for data source 0crm_oppt_h, i was unable to get the records( 0 records from 0). i checked in crm dev side in rsa3 , i am able to get the records there. so i have deleted the datasource and replicated once again. After activating update rules and transfer rules properly i have scheduled the IP, i am getting error message as ' error occured in source system '.
I have no selections is IP. I have checked the Idocs, trfc and the source system is connection is ok
I have checked the job in source system , It is cancelled. the job log is given below. I want to know how to correct this and what the steps i need to take futher. I am new to CRM . Please guide me
'You are not participant in the private activity CRM_ORDER 027 E'

hi
After executing IP full load for data source 0crm_oppt_h, i was unable to get the records( 0 records from 0). i checked in crm dev side in rsa3 , i am able to get the records there. so i have deleted the datasource and replicated once again. After activating update rules and transfer rules properly i have scheduled the IP, i am getting error message as ' error occured in source system '.
I have no selections is IP. I have checked the Idocs, trfc and the source system is connection is ok
I have checked the job in source system , It is cancelled. the job log is given below. I want to know how to correct this and what the steps i need to take futher. I am new to CRM . Please guide me
'You are not participant in the private activity CRM_ORDER 027 E'

Processing error in the soyrce system

Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message --proceesing error in the source system.
In the source system apllication log the following warning message displyed.
No assignment of payroll data to BW month for country grouping 99.
Diagnosis
No assignment is specified for country grouping 99 in the Customizing activity "Assigning the Payroll Data to BW Month".
System response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for longtime and in the manage tab it is in RED state.
If any one come accross this , please provide good inputs....
Thanks & Regards
SK

Hi,
You have to set the Settings in ECC system
R/3 Customizing Implementation Guide(SPRO) -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> (Pay-Roll Plugin) Assigning Payroll Data to a BW Month.
make a new entry for the BW Month for the country
Regards
Happy Tony

Job Termination In the source system (TSV_TNEW_PAGE_ALLOC_FAILED)

Hi Experts,
   I have a load in bw which extracts the data from R/3. In the IP selection i have OLAP variable set to 0calmonth and the selection is one month. The loads gets failed with the page allocation error in the source system. I tried reducing the packet size with different option. Still i couldn't complete the load.
If any one come across with this kind of situation please help to resolve this issue.
Thanks
Deepthi

Hi ,
Below are the parameters and values for them which are recommended by SAP.There is a SAP Note available for this.ASk yr basis consultant to check the notes.
ES/TABLE                    SHM_SEGS
ES/SHM_SEG_SIZE             2048
em/global_area_MB           250
abap/heap_area_total        4000000000
abap/heap_area_dia          2000000000
abap/heap_area_nondia       2000000000
ES/SHM_PROC_SEG_COUNT       16
ES/SHM_MAX_PRIV_SEGS        15
ES/SHM_USER_COUNT          2048
ES/SHM_SEG_COUNT           2048
Need to do a system bounce for the parameter change to take effect.
Regards
Balaji

Inbound idoc error in the source system

Similar Messages

Maybe you are looking for