Inbound IDoc: Field BVTYP is missing

Hi,
I am new to IDoc I need help with a scenario. We have an interface wherein AP documents are transported to SAP. When we are viewing these IDocs in SAP field BVTYP (Partner Bank Type) is missing
Thanks in advance

Hi,
Are you dealing with inbound or outbound IDoc for sales order?
I am a bit confused ... you mentioned the IDoc successfully posted (inbound IDoc?) however outsource EDI team reported that field ZEILE is missing (outbound IDoc?)
Regards,
Ferry Lianto

Similar Messages

Update Inbound Idoc field.

Hello All,
I am trying to send a idoc thru FIDCC1 thru ALE. I want Local currency and Group currency value to be recalculated in Target system before it gets posted in the target system based on a custom table(Source system is sending only document currency value in the idoc). Is it possible to do so in target system. Please let me know if there is any possible solution. Your help will be highly appreciated.
Thanks,
Frank.

If you are using a custom function module to process the IDOC you can simply put your validation in there. If you are using a standard one (eg, IDOC_INPUT_FIDCC1) you could either copy that to a custom module and then make the changes or you may be able to put the code in an enhancement point of the standard FM.

** Inbound IDoc - One field is missing but it is displayed in SXI_MONITOR

Hi Friends,
We have developed IDoc to IDoc scenario. Source IDoc is sent from 3rd party system. Target is an Z IDoc (Replica of VEHCLE01 IDoc).
When we test the source IDoc XML from RWB, the message processed successfully in SXI_MONITOR and target IDoc is also created in backend SAP system. But, the problem is that, in target payload there are 5 fields. But, in the physical idoc created in SAP system has only 4 fields. The last field is missing.
Since it is inbound IDoc, I deleted the IDoc meta data in IDX2 txn, and reimported again the Z IDoc. But, again the same problem is coming. i.e one field is missing in inbound IDoc. But, in the receiver payload, that field is there with value.
Kindly clarify, friends.
Kind Regards,
Jegathees P.

HI,
If that field is missing for first time in R3 means(ie Receiver system, Idoc posting in we02) , then
XI side:
1. u have check whether that field is existing in Target Interface,Target Message in Interface Mapping
2. Make sure that u have mapped that field in Message Mapping.
R3 (receiver side)
1. Plz check we30 , whether that field is there for that ZIdoc structure
2. Take the same Idoc which got posted , test in we19 whether that Idoc getting posted with that field or not?
check whether ur Idoc structure is activated in XI
Thanks
Praba

Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

Hello,
the above segment is missing in the inbound idoc - basic type pexr2002.
I have checked in TC-we30 and its available there.
but still the idoc is getting generated without this segment.
can someone suggest.
thanks
Arun

Hi All,
I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002 and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
We have done the following steps:
- BTE 2441 is available on our release
- house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
- entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
- code maintained in ZXF08U04
The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
Can you advise what we might be missing please?
Thanks and regards
Mike

Inbound Idoc - Date fields not getting saved

Hello,
I have created inbound idoc scenario in SAP. I receive Idoc from non SAP system to SAP system.
then data from IDoc is saved into different tables, for that I have written one function module (attached to process code)
One of the segments in IDoc type has date as a field. It is of type sy-datum.
When I receive Idoc in SAP only date fields are not getting saved in tables.
Is anything specific need to be done for date fields? please advice.

check which format you are getting into sap and make sure you are coverting in into required format.

How to change field values AFTER Inbound IDOC Posted successfully

Hi SAP Experts,
In my project I receive the inbound IDOC PORDCR05 from PI and posted as an Purchase Order in ECC.
I create the Z process code and Z function module (which is a copy version of IDOC_INPUT_PORDCR) and complete all the necessary configuration steps. It works perfectly.
My problem is: I have to collect some inbound idocs (that satisfied some criteria) and change the value of field EKPO-TXJCD and EKKN-KOSTL of the PO AFTER it posted successfully (means the purchase order is created and save in database).
How can I do this? I've try to put the logic code in Z function module, but it does not work, since at that time, the Inbound IDOC is not updated to the database yet.
Aprreciate your advise.
Regards,
Elaine.

Hi Elaine ,
as per your cretiria pick the idocs and take created PO# from status 53 & use the BAPI (BAPI_PO_CHANGE) to change the neccessary values in the PO. We can't reprocess those idocs again.
Reddy

Mapping IDOC to CSV file - Missing blank field values in CSV file

Hello:
I am mapping an IDOC to a .csv file, using File Content Conversion. I specify comma as the value for the parameter 'fieldSeparator'. I get a .csv file, but blank field values are missing in the .csv file.
For example, if the .csv file format is <field1>,<field2>,<field3>
and if <field2> is blank, then the .csv file contains
<field1>,<field3>

Hi Bac,
As long as the XML that goes to your File Receiver Channel contains the elements, even if they don't contain values, it should work fine.
For example:
<field1>data</field1>
<field2></field2>
<field3>data2</field3>
I suspect that your XML looks like the following:
<field1>data</field1>
<field3>data2</field3>
If this is the case you can update your map. You shouldn't need to put a space, just make sure the element gets created.
Thanks,
Jesse

RCVPOR is missing the Inbound IDoc

Hi all,
I am getting IDoc from the XI with the status code 56.
I found that receipt port is missing in the control record.
If I use sender partner type as LS, it is working fine. When I use the sender partner type as KU IDocs are not getting posted successfully, the port for the recipient information in the control record of the inbound IDoc is empty and all other filled are filled.
Any suggestions please
Thank you
Regards
Harsha

Dear Harsha,
can you explain how you solved the issue - I am experiencing exactly the same problem. I am receiving the same Message type from several other systems (not LI, but LS), and we are receiving other message types for the same partner. -> in all other cases the RCVPOR is filled correctly.
We are using webMethods and not XI, the RCVPOR is sent correctly by the middleware.
brg Karl

INBOUND IDOC not updating the basic data field which is created newly

Hi,
i am creating an inbound IDOC for material master creation in that in basic data1 i have created 2 custom field in general data 1 is updating and another is not updating with the value in iDOC.
User exits codes are fine. but data is not updating.
can some one help hw to resolve this..
regards,
thanigai

Hi,
Are you Debug the function module in Process code of IDOC and use COMMIT WORK in that Function module.

Inbound idocs segment fields

Hi,
Iam new to idocs and a functional consultant. I need to know whenever we receive the inbound idocs and if i see the segments of the inbound idoc, do the fields which i see in the segments are the sap fields.????/ for instance if the inbound idoc needs to create a sales order, then the fields of the segments of such an inbound idoc are the normal sap sales order fields ??
do i need to give functional specs to the abapers that whenever the inbound idocs is received the segments fields need to be mapped to sales order fields if such an idoc needs to create a sales order ??
regards
sachin

Hi Sachin,
Most of the IDoc segment fields are simmilar to SAP transaction fields e.g. most of the ORDERS IDoc segment fields will be simmilar to what you can see in VA01/VA02 screen fields.
Some fields may have different names.
In the case of few segments which may repeate in IDoc with different qualifiers (such as partner details, date segments), fields will be same but different qualifier value decides where these field values will be populated in the Order.
If you are using standard function module to create Order, it will take care of mapping IDoc segment fields to VA01/VA02 screen fields. But if it is a Z function module, then you need to specify the mapping.
Hope this information will help you.
Regards,
Mahesh Pakhale

Missing IDOC field in XML after IDOC reimported in ESR

Hi Guys,
I have just reimported my IDOC in ESR wherein an additional field is added.
However, when I test a message, the IDOC field is missing in the XML payload upon entering PI even though I have entered a value in the IDOC.
Flow:
SAP ECC > PI
I have also already updated my message mapping. I'm not sure if I have missed any steps after importing the IDOC in ESR.
Could you please help me on this issue?
I'm using ICO by the way.
Thanks and Regards,
Neil

Hi Neil,
As Shanthi said you need to update metadata but since you are using ICO you need to do it in NWA.
NWA->SOA->Monitoring->IDOC Adapter Monitoring
Regards,
Praveen.

Essential Transfer Parameters Missing in record during Inbound IDOC process

Dear Gurus
We are creating a Inbound delivery in one system, we have made all the custom settings for IDOC processing for inbound and outbound idoc in both the systems. Upon the execution of inbound delivery, the system
During the Inound delivery processing, the outbound IDOC is successfully distributed. However in the receving system, the IDOC is not posted and it throws the below erroe\r
Essential transfer parameters are missing in record: 0180000055 000010 / Mess number 561 and message type E
We are using Outbound IDOC mess type DESADV basic type DELVRY01 process code DELV with FM IDOC_OUT PUT_DELVRY
In the receiving system message type DESADV , process code DELS, and FM IDOC_INPUT_DESADV1
What is that which is going wrong.
Please help me out
Thanks

Hello
To create inbound delivery from outbound delivery, use following setting -
Outbound idoc -
idoc type - DESADV01
message type - DESADV
Process code - SD05
FM - IDOC_OUTPUT_DESADV01
Inbound iDOC -
Message Type - DESADV
Process Code - DESA
FM - IDOC_INPUT_DESADV
Idoc Type - DESADV01

Update EKKO Z field using Inbound Idoc

I have an requirement where I have to update Z field in EKKO while creating PO using inbound Idoc.
Basic Idoc Type: PORDC103
Function module: BAPI_PO_CREATE1
Extended POHEADER and EKKO with z field.
I am using exit EXIT_SAPL2012_001 to populate Z field while creating PO as below.
poheader-zfield = '123'.
extensionin-structure = 'Z_HEADER'.
extensionin-valuepart1 = '123'.
APPEND extensionin.
PO is getting created but z fields is not populated. Do i need to add any thing else apart from the above steps?.
Any help appreciated.

Rajitha,
Add your Z field in structure BAPI_TE_MEPOHEADER and a corresponding flag in BAPI_TE_MEPOHEADERX.
extensionin-structure = 'TE_MEPOHEADER'.
extensionin-valuepart1 = '__________123' "'10 spaces than value for the field'.
APPEND extensionin.
extensionin-structure = 'TE_MEPOHEADERX'.
extensionin-valuepart1 = '__________X' "'10 spaces than X.
APPEND extensionin.
You don't need to implement/use any exit for filling the custom fields.
Regards,
Diwakar

Message variant is missing in INBOUND IDOC.

hi,
Any one can help on this issue?
The sender has confirmed that message variant was filled in outgoing file.
However, When we received this Inbound IDOC, the message variant is blank.
I still am confused by two questions:
1. The function module which insert record into table EDIDC and EDIDD, is same as the function module which post this IDOC to sap module(normally we maintained it in WE57)
2. We normally need to maintained in WE57, but also need create one processing code, what is relationship between WE57 and processing code(WE42)

Hi,
Message Type/Message Variant needs to be maintained in WE20 ( Partner Profiles). In case of inbound IDOC ( receiving the data other systems) Data processing/posting will happens via function module. the function module will attach to the process code.
Process Code : The IDoc interface uses the process code to find the business process which controls the conversion of the IDoc into the SAP document.
The Process code will assign to the function module in WE42, the same function module will assign to the Message type and Idoc type in WE57
In a short summary, The Function module required to post the Idoc/update the data in SAP. However the Function module should process specific to the Message type and Idoc type only. It means the settings is required to identrify the correct function module to process the Inbound Idocs.
Whenever there is a problem with ALE setting the message 64 will trigger, it means the IDOC is ready to transfer to the application ( process through FM ).
Thanks,
Kiran.

Inbound IDOC missing

Hi ,
We are testing idocs between two clients of a system ABD, between ABDCLNT100 and ABDCLNT200.
The sender is client ABDCLNT200 and receiver is client ABDCLNT100. The outbound process was successful in client 200 but we cannot see the inbound idocs in the receiving client 100. The status of the outbound IDOC in client 200 is 03.
Could anyone please let me know all the checks I need to do in client 100 to find out why the IDOC is not posted or why we cannot even see the inbound idoc in 100.
Thanks
Swetha

Hello
sm58 in the sender to see if there are any rfc errors.
sm59 to ensure that the rfc connections between the two clients are working.
bd64 to make sure that the definition of the distribution model is correct.
Regards
Greg Kern

Inbound IDoc: Field BVTYP is missing

Similar Messages

Maybe you are looking for