Inbound Idoc Type / Message Type / Process Code for Delivery via Tcode VL0N
Guys,
I need to to Idoc Type and Message type for to create Delivery ( Tcode VL01N ) for a sales order.
I tried Idoc Type DELVRY03 and Message Type DESADV, but this is for Purchase Order ( VL31N ).
Kindly help me.
Regards
Srikanth M
Guys
I could not use above message type/idoc type as they are not released in SAP.
So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
Regards
Srikanth M
Similar Messages
-
Error while trying to post inbound idoc of message type COND_A
Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
MohitI do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated. -
Message type and Process Code for 940 IDoc
Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar. -
Attachment of mesasge type to a process code..
Hi..
When I am trying to attach a message type to a process code , for outbound it is allowing me to do so but for inbound it is not allowing me.
So can anyone please tell me where is the problem?
ThanksHi Subhash,
Please ensure you have setup ALE Attributes (BD51) then message/application object (WE57) prior to setup process code (WE42). Otherwise you may not able to setup/assign your function module.
Also find below link which will show you step by step on how to configure inbound IDoc processing.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
Hope this will help.
Regards,
Ferry Lianto -
Idoc type, message type and process code for EDI 940 & 945
Hi,
We are implementing a scenario wherein we are required to send a Wharehouse Shipping Order to the warehouse (forwarding agent) using EDI 940. The output of the o/b is triggered from the Delivery (VA01) after creation of a Delivery in SAP. Once the warehouse ships the goods, it notifies us back by sending EDI 945 (Warehouse Shipping Advice). Using this inbound 945 we are required to update the existing delivery in SAP, i.e., it should do the Pick, Pack and PGI.
Can someone tell me which Idoc type, Message Type and Process code should be used for the above scenario.
Thanks in advance for the help.
Regards,
GajendraHi Gajendra,
For EDI940, you can use message type SHPORD or WHSORD, IDOC type DELVRY01 and process code DELV.
For EDI945, you can use message type SHPCON or WHSCON, IDoc type DELVRY01 and process code DELV.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214
Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AMHi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu -
Message type ,IDOC TYPE , PROCESS CODE for Edi 990
Hi ,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
Thanks in Advance.
Ajay KollaHi
Pls check the below links
1. http://www.erpgenie.com/sap/sapedi/ansi.htm
2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
Hope this may helps you.
Regards
Sirigiri -
Process Code for Message Type LOIPRO(in ALE/IDOCS)
Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjalyHi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM -
IDod Type,Message Type,Inbound Function,Process Code Required
Dear All,
I require
1. IDoc Type
2. Message Type
3. Inbound Function
4. Process Code
for
a. Vendor Master Creation,Updation,Deletion
b. Customer Master Creation,Updation,Deletion
c. Vendor Invoice(TCode-FB60) Creation,Updation,Creation
d. Vendor Credit Memo(Tcode-FB65) Creation,Updation,Creation
e. Customer Invoice(TCode-FB70) Creation,Updation,Creation
f. Customer Credit Memo(TCode-FB75) Creation,Updation,Creation
i require to insert all the above detail into SAP from another system so please provide me the full detail.if the IDoc type is separate for Creation Updation Deletion then provide likewise.
Everybody will rewarded.
Thanks,
RPhi
use t code wedi and goto EDI administration menu. in that goto development menu. there you can find all items like Idoc type, message type or process code all information is available. You can also use t code WE30,WE31,WE80,WE81, WE42 - Inbound process code and WE41 Outbound process code.
Hope this helps. Assign points if useful.
Rago -
Specific process code for Production order message type LOIPRO
Hello,
Is there any specific process code for Production order message type LOIPRO.
Request you to reply.
Thanks
PrashanthHi Prashanth,
sorry for last thread ... that not contain full information ...
For message type LOIPRO you can use process code APLI.
In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff.. http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
Regards,
Amit -
Process code for 869(EDI ) Order Status Inquiry Message type.
Hi Gurus,
Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
Thanks,
SudhakarHi Everybody.
There's no standard process code for LOIPRO Outbound Idocs.
This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
BD64.
Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
You can choose.
Regards.
Albert. -
Finding Process Code for a message Type
Hi,
Is there any way to find process code for a specific message type.
Message Type WFRESOURCE_CHANGEAVAILABILITYHi Swathi,
I have already mention the process codes that can be used for this message type. For your convenience i am also attaching th description ,which process code can be used when.
ABI_AIDN_IN Auto- ID Idoc process
ED00 Display Idoc using work item
ED00_XML Display idoc using work item (xml)
ED08 Forward idoc
ZABI_DLV_IN Delivery advice ( AIDDESADV with DELVRY04)
Regards
Vinod -
IdocType, Message Type & Process code for Payroll Posting
Hi Gurus,
In My Project, the SAP HCM is Maintained as a separate instance and rest such as FI/CO resides in ECC ERP. Now We need to Interface the HCM Instance with ECC ERP, where FI/CO resides to post Payroll Results. Hence I am writing a Technical Specs for ALE interface between SAP HCM and ECC ERP. I came to know that a standard ALE is existing for this purpose and I hereby need its Idoc type, Message Type and Process code for the same.
Thanks in advance.
Regards
Vinoth Kumar.RGuys
I could not use above message type/idoc type as they are not released in SAP.
So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
Regards
Srikanth M -
What is the process code for Message type FUNDMA
Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
WilliamCheck entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish -
What is the process code for message type FIXEDASSET_CREATE?
Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AMHi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish
Maybe you are looking for
-
Hi all, Can any one tell how to get the number of files(.EPS) count inside a folder when the folder path is specified in VC++ 6.0? Thanks in Advance. Regards myriaz
-
Stolen Macbook found with Prey, only files, NOT folders, are missing
Prey worked perfectly to get the cops to go to the thief's house! My Macbook Air OS X Lion is safe now. All the programs I installed are still there, and my folders are still exactly in the same positions. Even the subfolder in a folder I named my eb
-
The stock of component item cannot be negative
I'm having this strange problem with a number of work orders. I issue all of the components. All of them. If I bring up the issue window again, it's empty. I try to release and it gives the above error. I don't get it, if there wasn't enough sto
-
Hi all, We are doing RFC->XI(BPM)->File scenarios. When we test the scenario with the same input and sometimes it works fine. But in some case we are getting a "Scheduled" status in the 'Monitor for processed XML messages(sxmb_moni)' . Ex if we test
-
I want the automatic redirection to the login page work when a proxy is configured in the IE parameters. I used the command "config network web-auth-port 8080", but when I open IE, I'm not redirected to the login page (the DNS request works). When I