Inbound IDocs to post credit memos??
Hi All,
I have a scenario. I have to accommodate EDI SAC codes into SAP through IDocs(inbound vendor invoice (FB60)). I have around 4 to 6 SAC codes which have values that will be either credited or debited to GL accounts. some are at header level and some are at detail level.
How come I implement this scenario. I have no clue to implement this scenario.
Plz do reply.
Thanks very much,
Creasy
Hi VJ,
thank you very much.
Is it possible to create credit memo without any reference to document in SAP.Because the third party system only sends very small amount of data
(customer number, amount, paymentmethod, date).
Can i be able to create the credit memo with the above information
Please help me..
Thanks
Raju
Similar Messages
-
How to post credit memo for a customer usin F-27 transaction using IDOC .
Can somebdy please advise as to how to post credit memo for a customer using F-27 transaction using IDOC ?
Thanks in anticipation ,
Ambar patil .Hi,
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001305932005E
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000051812008E
Thanks,
Mansoor -
Warning message while posting Credit Memo.
Hi Guru,
Currently the Invoice shows a soft warning message if a same number
in Reference field (XBLNR) is used to post two different inovices.
the client wants the same kind of Soft message to be appeared in case of a same number is used in the Reference Field when Posting credit memo. I think the check shd be against Accounting Doc right??
Incase of invoice we have a check for duplicate invoice in SPRO and we can maintian it..
What about credit Memo??? we do have any config...to my knowledge we need technical development.
In Se91 i will go and create new Message and assign it to M8(Message Class for invoice)........and do assignments in OBA5
Now the soft warning msg can be achieved only by calling this msg in ABAP Code right??? can be done thru Config..?????.
if any other details if i need to know please do let me know.....or anyother suggestions....to achieve this,,,
Is it a Config or Developement ???
Thanks for the support
BalajiIn OBA7 if i check the "Reference number" that means while entering the document the reference number is compulsory field.
and in vendor master i already checked the docueble invoce check that is why while posting KR it is giving the warning message.
Regards, -
ABGL Post Credit memo for asset
Hi,
In transaction ABGL (Credit Memo in Invoice Year), I wanted to issue credit memo for price difference in acquisition of asset.
issue background:-
asset bought without PO (F-90), last year 2010
Now we want to post Credit memo for this asset.
Error hit:
Acquisition value negative in area 01.
Message no. AA617
What is this error message mean? How to resolve this?Hi,
in OADB, our setting :-
Acquisition value = +
NBV = +
Investment grants = 0
Revaluation = 0
Ordinary depreciat. = *
Special Depr. = *
Unplanned Depreciat. = *
Transfer of reserves = -
Interest = 0
Revaluation ord.dep. = 0
I follow your step, i change acquisition value field to "-", it prompt me this message:-
Caution: generic values for real depreciation area (refer to long text)
Message no. AC246
Diagnosis
You set up depreciation area 01 so that all types of acquisition values are allowed. However, this only makes sense for derived depreciation areas.
System Response
Warning message. The system allows the setting, but note that it can lead to undesired effects for real depreciation areas.
Procedure
Check the setting.
I change theAcquisition value + to -? -
Inbound IDOC to post goods receipt with inbound delivery as reference
Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AMHi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
Message DESADV
Operation code DELS
OUTBOUND - Partner KU
Message DESADV
Operation code ???
Please advise
Suchart -
Create IDOC when the credit memo is generated
I want to create an IDOC.
The IDOC will be created when the credit memo is generated.
Please help me to create the segments.
Title was edited by:
Alvaro Tejada GalindoHi
First you find the relative Idoc Type and Message type for that credit memo in the tables EDBAS and EDMSG
Then go to WE31 and create the additional segments as per your requirements apart from doing lot of other related settings
see the doc
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Regards
Anji -
Error when posting credit memo in current year
Hi all,
When I am trying to do credit posting to an asset in current year it is giving me follwing error. Can someone help me what can be done.
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000170009993-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
Thanks,
SaradaHi,
i think you've chosen the incorrect tansaction type ( perhaps 100) for your credit note . try to post your CN with another transaction type; e.g. 160 or 161, which do not belong to transaction type group 10.
you can check this with trx. OA81
regards Andreas
pls reward useful answers
thank you! -
Idocs to create credit memo and debit memo
Hi,
I need your expertise in creating credit memos and debit memos in sap using idocs.
I am working on integration between third party system and sap using web methods.
My requirement is to create credit memos and debit memos in sap using idocs.
Could you please help me with the message types for the credit and debit memos.
Thanks
RajuHi VJ,
thank you very much.
Is it possible to create credit memo without any reference to document in SAP.Because the third party system only sends very small amount of data
(customer number, amount, paymentmethod, date).
Can i be able to create the credit memo with the above information
Please help me..
Thanks
Raju -
How to create an idoc when the credit memo is generated!
My requirement is "An idoc will be generated when the credit memo is created "
What is the possible way to that.
Please send me steps (with screen shots if possible)
thnksRe: How to create a credit memo !
Reward point.. -
Hey,
I posted a credit memo in transaction FB65 but made a mistake by not indicating a check mark in 'calculate tax' box.
I checked transaction FB02 to correct this but there is no option other than reversing the posting.
What is the best way to correct this?
Could someone give the steps involved to correct this mistake?
ThanksHello,
You must first reverse the document in error and then capture the document correctly.
In SAP system, this is done to provide an audit of the correction.
Hope this clarifies your doubt.
Thank you -
Post credit memo or vendor red invoice
Hi everyone,
How can I configure the posting of a credit memo like a vendor red invoice, but with negative values?
At the moment the posting is simply reversed, but the ammounts are the same like when posting an invoice.
Current setting:
expense = vendor (invoice)
VAT
vendor = expense (credit memo)
VAT
Wanted setting for credit memo ( - )expense = ( - ) vendor
( - )VAT
Thanks for your quick reply.
Daniel.Hi Daniel,
You can achieve this by activating nagative postings allowed, please find the path below,
Financial accounting>>General Ledger accounting>>Business transactions>>Adjustment posting/reversal>>Permit Nagative postings.
Kindly note that, you also need to active the same for the document type for which you are posting this reversal.
In your business case document type would be RE, KG so and so on.
Regards,
Ramesh. -
What is SAP procedure to post credit memo without reference
Hi,
I was wondering what is the standard SAP solution for posting a credit memo to a customer without referencing the original sales order.
The goal is to not have to create a return sales order or post only a credit memo invoice against the original order. I was wondering if this procedure exists? I just need to be able to post the credit to the customer, no refernce necessary.
Also, Let's say we want to issue a partial credit back to the customer. Is there a way to do this without reference. I would actually like to know what are the best recommended ways for using both with and without reference to the original sales order.
Last item. After the credit is posted. What is the best way to reverse the payment. Should I use txn FB08?
Thanks for your help,
Best, ErikThanks G. Do you happen to know how to reverse out the payment with or without reference to the original order?
For instance. I want to reverse multiple payments out together by grouping the a total. So basically i will group the total credit memo balance and post in FB70..Then i need to group the total payment balance and post. Is there a procedure for the payment portion.
Thanks again for your help. -
Dear all ,
we created a A/P invoice in the year 2010-11, we have to cancel this invoice in the same year.
but we cancelled it in current year i.e., 2011-12 now we facing inventory value incorrectly at the end of 2010-11 year, so that we require rectification of the wrongly entered credit memo.plz answered ASAP.
Thanks & Regards,
VjaiHi,
You can make on emore invoice for quantity and amount as per credit memo in the same year.It will knock off the impact of credit memo.
You can pass JE for amount impact in last year and can post goods issue /Reciept for inventory movement
Thanks
Deepak Tyagi -
Asset is not getting reversed when posting credit memo
Dear Sapians,
My client is having an asset with a value of Rs 6,00,000/- and the asset capitalized date is 19.07.2007. Now the client wants to raise a creidt memo on 19.07.2007 for Rs 5,00,000/- for which he dont wants to calculate depreciation with the transaction type 105 (credit memo in invoice year) in t.code F-90.
But the system is giving the following error.
Balance for transaction type group 10 negative for the area 01.
so can anyone plz revert back me on the issue.
Regards
T N RHi:
Go to Asset Master As02, clcik on the tab Depreciation areas
double click on Depreciation area (Ex:Book Depreciation area)
you will come to the screen Change Asset:Depreciation area Book depreciation .
In Additional specifications, you will find a check box Neg.values allowed.Select on the check box and try again.
Please let me know if you need more information.
Assign points if useful.
Regards
MSReddy -
Inbound idoc for posting Goods movements
hi,
iam using Transaction WE19 and posting some test data to post goods movement into same system for testing . i have used the message type MBGMCR and process code BAPI for the inbound processing.
Iam posting test data for movement types 101,102,641 and 642 .and iam processing with the unbound FM BAPI_IDOC_INPUT1, but iam getting a status 51 (application dod not posted ) with error as ' Update control of movement type is incorrect (entry 101 X X )'.
what does this mean? please suggest why this error could come?
if i get a status of 54 - EDI: Partner profile inbound not available .what may be the error? my partner profile setting were correct.
thanks,
sohaHi !
The error means that there is an inconsistency between the "given" data and the date that BWA 101 is needing.
The Table that is beeing checked is the T156.
Check the data you are giving to the idoc. You may check it with the IDOC-docu or with the Docu of the FM BAPI_GOODSMVT_CREATE to see what fields
have to be filled in what way to create an 101 .
Regards
Rainer
Some points would be nice if that helped...
Maybe you are looking for
-
Hi, Does anybody know how to perform translation of web templates in other language for e.g in french. I have to translate my templates that contain several web items in french please suggest me how to achieve that. Thanks in advance !
-
IWeb doesn't offer widget for Facebook "Like" button?
Is it true that iWeb doesn't offer a widget for adding a Facebook LIKE button? The code offered to copy by Facebook doesn't work when I paste it into a text box on my iWeb site. Thanks for any insights fellow users can offer. My free trial will be en
-
Flex Charts: Will they improve?
Hello! I'm trying to make some minimalistic charts for some ultimate PDF business plans and annual reports. I did them in Illustrator first, but Illustrator's graph tool hasn't been developed on since 1996, and it was a real pain to update my charts
-
Error 'Enhancement RSR00001 already belongs ....'
Hi, While creating a project in CMOD, while assigning an Enhancement RSR00001 it displays an error 'Enhancement RSR00001 already belongs to project Y....'.
-
Using "Groups" within "Contacts", Messages and Mail
Why did Apple change in IOS 6 how you now view groups in contacts? Before it was easy, but now it's just plain stupid. Did anybody check this before it was released? Before when I selected the group I wanted it would then display who was in that grou