Inbound Processing : Error when changing a BOM

Hi Experts,
I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
Start processing in API: CSAP_MAT_BOM_MAINTAIN
Group BOM
Changes to the BOM exist after 03.11.2008
Date 03.11.2008 copied from change number
Item (1) 0040 L 000000001084237016 000000000000000000000000 cannot be uniquely identified
Item (3) 0100 L 000000001084237021 000000000000000000000000 cannot be uniquely identified
Item (6) 0200 L 000000000768041196 000000000000000000000000 cannot be uniquely identified
End of processing in API: CSAP_MAT_BOM_MAINTAIN
Any idea ?
Regards,
David

Hi Gordon,
I think I found something.
When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
Regards,
David

Similar Messages

Permanent error in BPE inbound processing error

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Seshagiri.

Hi Praveen,
If the BPM goes in error due to "The incoming payload structure is incorrect (not matching message type structure of abstract interface)" , is there any work around?
Currently in my scenario BPM goes into error due to incorrect structure , error show up in SMQ2 . And the subsequent message also get stuck. What I have to do is to delete the queue in error and reactivate the queue manually.
Is there any way we can avoid this situation.
Thanks,
Pankaj

Processing error when doing a drillthrough agianst a Rolap dimension, working with MOLAP

Hi,
I'm having a drillthrough dimension (fact) that i'm using for drillthrough scripts. One thing that I have come a cross is that I get processing errors when I run queries agianst a ROLAP dimension where as it works agianst the same dimension set
as MOLAP. This is kind of confusing me.
The error message i get is like this one:
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined
limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while the 'Journal NO' attribute of the 'GLFact' dimension from the 'XXX' database was being processed.
I found a article about this
http://sqlblog.com/blogs/marco_russo/archive/2009/01/17/issues-executing-a-drillthrough-with-a-rolap-dimension.aspx
But I have set KeyDuplicate, Keynotfound, Nullkeyconvertedtounknown and NullKeynotallowed to ignoreerror and still it doesn't work.
So my questions are 2:
1. Do anyone have a solution for me? Or having any thoughts about this?
2. When switching over to MOLAP the processingtime takes about 30 min. How can i decrease this to a minimum?
This is all implemented in SSAS 2005.

I'm getting the exact same error when attempting to drill down on a rolap dimension associated to the cube. the cube is molap, but the dimension is rolap to reduce processing time (processing dimension using molap spike my 4 core processing to 100%
for 4 minutes due to all the select DISTINCT on the attributes (about 10)).
I too have seen the article about KeyDuplicate but I think this is a different issue. Anyone figure out the problem?
Version: SSAS 2012 SP2
Example of error:
Server: The current operation was cancelled because another operation in the transaction failed. Errors in the OLAP storage engine: An error occurred while the 'City' attribute of the 'NameAddress'
dimension from the 'MyDatabase' database was being processed. Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.

ECN field obliged when changing a BOM

Hi all,
I found after flaged the historical demand and ECM in OS27,it is still just a warning message that tells the user a ECN should be maintained when doing CS02,changing the message type and category is not available in the standard system.
How many other ways that I can make the filed ECN is a must when changing the BOM,besides SHD0.
Is there a standard and easy solution?
Txk!

Dear,
For user you can do it through the Authorization object C_STUE_NOH
Please refer this link for details,
Re: Change number mandetory for CS20 -reg
Regards,
R.Brahmankar

Error when changing unit of Issue in material master

Hi,
When i am trying to change Unit of issue in Qualitymanagement view of a material using MM02 transaction, we got error message - "The unit of issue cannot be changed because the material is used in a BOM-------Mesage no. M3214"
Can anyone suggest what is the reason behind this. ?. how to avoid this error.
Thanks in advance.

HI Aditya,
"The unit of issue cannot be changed because the material is used in a BOM-------Mesage no. M3214"
The reason is that material is used as a component in BOMs with the present unit of issue as a unit in the bom line item.Unless you change that bom line item unit to its base unit ,system will not allow you to change the unit of issue in QM.
First check in which BOMs the material you were changing is used as a component.this you can do in transaction CS15.
then change the unit of measure used for the material in bom line item to base unit of measure.if one only one BOM is there change in CS02.if more BOMS are there do mass change in CS20.
Then try to change the unit o fissue.now system will allow you to do the changes.

Permenant error in bpm inbound processing error in inbound queue of pi7.1

Hi Experts,
In E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
Thanks & Regards,
Giri.

Hello
Check the note #1126656 BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
Regards
Mark

Inbound Processing Error ?

I create an outbpund idoc as a file on a file port : FILEIN.
FILEIN port is defined as a file port with Dir parameter set as : /tmp/
and FM parameter set as : EDI_PATH_CREATE_DATE_TIME . No parameters are maintained for Inbound file .
I create outbound idoc with :
Reciever Port FILEIN and Sender port A00001 (defined as a trfc port ).
The Idocs are generated in the specified directory .
Now i want to process these idocs with RSEINB00 Program .
I give the filename and Port name : FILEIN to the program .
The partner profile is maintained for the inbound processing .
But I somehow recieve the error : '56 : Reciever port in control record is invalid. '
How can this be solved ? DO i need to maintain the Inbound file parameters too in the File port . ?

Hi,
You should first turn your output IDoc file to an Inbound IDoc file. use the transaction code we12 to that.
Following is the more info on Using We12.
We12 - IDoc testing tool which will emulate an EDI subsystem, by taking a outbound text file IDoc previously generated by SAP and use it to create and process an inbound IDoc. It is also possible to create an outbound IDoc from an inbound IDoc as well. Commonly referred to as the Turn-around program
Field level documentation on each field on the We12 screen..
Source:
Directory + file: The field contains the path and filename of the existing IDoc text file at the operating system level.
Target:
Directory + file: the target fields contain the path and filename of the IDoc text file that is to be created. The default entries of these fields are based on the definition of the TESTPORT specified in the IDoc Administration transaction (see WE46 for IDoc Administration; WE 21 for Port Definition).
Sender:
Partner Number: Customer or Vendor number of the sender - when testing inbound messages, this partner number must exist as a valid inbound partner (transaction WE20).
Partner Type: Code, which identifies the type of sender (i.e. LI Vendor; KU Customer).
Partn.function: Code, which identifies role of the partner (i.e. SH Ship-to).
Message type: Code, which identifies the type of data, based on the EDI message type (i.e. ORDERS, INVOIC).
Variant: Code, which further subdivides the type of message (i.e. MM or FI for a logical message type of INVOIC).
Function: Code, which defines the function of the message with regard to its transmission.
Test: Flag indicating that this is a test message. This is one of the keys to finding the inbound partner profile.
Port: Logical ID of the sending system. Enter the logical name of the receiving as defined in the transaction WE21. The default entries of these fields are based on the definition of the TESTPORT specified in the IDoc Administration transaction (WE46).
Recipient:
Partner Number: Customer or Vendor number of the receiver.
Partner Type: Code, which identifies the type of receiver (i.e. LI - Vendor; KU - Customer).
Partn.function: Code, which identifies role of the partner (i.e. SH - Ship-to).
Direction: The direction that the newly created IDoc will be assuming -1 for outbound, 2 for inbound. Default is 2.
Client: The client that the newly created IDoc will be processed in. The default is the client that the user is logged into when executing this transaction.
Port: Logical ID of the receiving system. Enter the logical name of the receiving system in the form 'SAPxxx'. 'xxx' stands for the ID of the SAP System. The default entries of these fields are based on the definition of the TESTPORT specified in the IDoc Administration transaction (WE46).
Turn-around program examples: When taking an outbound purchase order IDoc (which was generated via MM purchase order create) and turning it around to test inbound SD sales order creation via EDI, the Sender would be a customer while the Receiver would be a vendor. If using an outbound advanced ship notice IDoc (generated via SD delivery processing) and turning it around to test inbound shipping notification, the Sender would be a vendor, and the Receiver would be a customer. If using an outbound invoice IDoc (generated via SD invoicing) and turning it around to test inbound EDI invoice processing, the Sender would be a vendor, and the Receiver
Hope this helps.
Mark the Helpful answerers..
Regards,
Nagaraju Chidurupalli

Error when changing BPM: "Insufficient access privileges"

Hello, Logic Express gurus:
I am just a lowly fitness instructor trying to mix her own music (self taught DJ). When changing the BPM here's what I do:
I double click on the song track, then from the window that pops up, I click on the "Factory" pull down menu, then choose "Temp and Pitch Machine". When I change the BPM to the desired tempo and click "Process & Paste", I get the following error:
"Insufficient access privileges for operation (Result code -5000)", then another error stating:
"Error when creating temp file!"
It used to work beautifully. Can anyone assist me? Thanks.

Thanks for the reply, Matt. I tried your suggestion, but it did not make a difference in the tempo. I am bringing in MPEGs, by the way.
My method was working fine until I began getting this error message. Any further suggestions from you or anyone?

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

Automatic ROW Processing error after changing Schema

Hello all,
I have an APEX 3.0 application referencing tables on a different schema from the parsing schema.
Workspace A -> using parsing schema A1
Application A -> installed in Workspace A
Application A -> access tables in schema A2 from schema A1, through synonyms
All is working fine.
Then I had to duplicate the application (let me say: to have a test environment).
So, I created a Workspace B, a parsing schema B1, I've installed application A as application B in workspace B, and I've created schema B2 and I gave the grants to schema B1.
Application B is running fine when trying to access objects on the parsing schema B1, but it returns a lot of errors when accessing objects on schema B2, in particular on Automatic Row Processing and Automated Row Fetch processes. The error I'm getting vary from ORA-942 (table or view doesn't exist) to ORA-936 (missing expression).
A strange thing is that in Automatic Row Processing and Automated Row Fetch processes, I can choose only schema A1 as Table Owner, and all is working fine.
In application B, I can select as Table Owner also the schema B2, even if it's not associated to the workspace. By doing this something works better. But I don't want to modify every page in the application where this happens. Also because I want the opportunity to maintain only one application.
I think that the application installed in workspace B, still tries to access objects in schema A2, but I don't know why.
Do you have any suggestion?
Thanks.
Andrea

It returns these results:
WORKSPACE     APPLICATION_ID     APPLICATION_NAME     PAGE_ID     PROCESS_SOURCE
WS_DEMO     107     myappname     73160     F|&FETCH_SCHEMA.:CDW_LST_GRP:P73160_LTG_ID:LTG_ID
WS_DEMO     107     myappname     73160     &FETCH_SCHEMA.:CDW_LST_GRP:P73160_LTG_ID:LTG_ID|IUD
The query returns the same results in PROCESS_SOURCE columns, when ran from workspace A or B.
I've found that FETCH_SCHEMA is an "application definition", and I've setup correctly in workspace B. The problem persists.
Bye,
Andrea

Mass processing - Error when processing Java programs / VMC out of memory

When running a mass update background process that updates the status of a service order in CRM the job fails due to error 'Error when processing Java programs'. I checked the VMC (SM52) and noticed that there is an error about the VMC running out of memory.
The background program can either be a PPF Action or a Z-ABAP program that performs the update. Both programs are performing a CRM_ORDER_INITIALIZE but it seems that the VMC is not releasing the memory fast enough.
Is there anyway we can force the VMC to release the memory after processing of each individual order?
Thanks!

I got similar issue and it got resolved by useing CRM_ORDER_INITILAIZE. Initalization should happen after every Order processing and see that only one header guid is passed to the the FM. May not be good option ,but just try by putting wait for 5secs after CRM_ORDER_INITILAIZE.

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Error when changing the length of IO

Hi Experts,
I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
Please help me out.
Regards,
Pavan

Hi Ananda,
We cannot delete the master data.
Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
If anyone any any solution for this otherthan deleting the existing data, please do let me know.
Regards,
Pavan

Facing an error when change the sysadmin password

hi expert,
when i am going to change the sysadmin password i m facing the below error on linux in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
[applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER SYSADMIN sys@adm!n
-bash: !n: event not found
plz suggest how can i resolve the above error.
thanks & regards
pritesh ranjan

Hi Pritesh Ranjan,
plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
exp -
alter user system identified by manager;
for sys
alter user sys identified by oracle123; (in production environment without down the ebs application)
Yes, you can change without restarting the ebs application.
And your syntax seems fine.
Thanks &
Best Regards,

Inbound Processing : Error when changing a BOM

Similar Messages

Maybe you are looking for