Inbound Processing of Idocs with status other than success
Hi,
I am new to ALE/Idocs. Can anyone please let me know how can I process the Idocs which have the status other than 53.
Thanks & Regards,
Indira
Hi,
In addition to the previous posts few more programs to process failed inbound IDocs are as mentioned below.
- Use program RBDAGAIE to process edited IDocs (IDocs with status 69)
- Use program RBDAPP01 to process IDocs failing with serialization issue (IDocs with status 66)
- Use program RBDAGAI2 to process IDocs after ALE inbound error (IDocs with status 56, 61, 63, 65)
~ Bineah
Similar Messages
-
Splitter program for processing the IDOCS with status 64.
Hello folks,
I have a requirement explained below. I am looking for a sample code which could help me to jump start with initial development.
Requirement:
Develop a splitter program which retrieves all the IDCOS with status 64, create and schedule batch jobs with 200 IDOCS each. The splitter program with be scheduled every 15 min.
Restrictions
Only 150 batch jobs can be created at a time.
Estimation
There may be around 36000 IDOCS with status 64 every hour.Srinivas,
Here is the explaination why we require a splitter program.
Using RBDAPP01 parellel processing
Let us assume there are 4 servers A, B, C and D in a server group. If we select RBDAPP01 parellel processing there will be too many RFC calls to the servergroup.
(there are some more RFC calls later on for Order creation for example). As there is a restriction with number of RFC calls, we need to clear other RFC's before making new one. This is making complex and messy.
Using RDBAPP01 serial processing
For the volume of orders getting created each day, it takes a week to process those Idoca created in one day. Hence it is not a good solution.
Splitter program
We spawn 150 batch jobs with 200 records each. This way if we think it takes 20 min for each job to complete...by the end of 20th min we must had processed 30000 idocs.
Hence it is the solution offered.
Srinivas...still this confuses me..but if I am wrong anywhere please correct me.
But your initial response has helped me a lot. Everything was blank to me, ur reply made it clear over the requirement.
Thanks a lot,
Naren -
Why some scripts in R12 exit with status other than 0
Some scripts in R12 like adformsctl.sh exit with status 3 , adstrtal.sh exit with status 1 etc
when we read log file for these scripts startup the error is timed out .
Ho we can find the root cause for these errors and their solution ?
can some body explain plz ?error messages are like this :
Timeout specified in context file: 100 second(s)
script returned:
ERROR : Timed out( 100000 ): Interrupted Exception
Executing service control script:
/opt/oracle/inst/apps/PROD_prodapps/admin/scripts/adoafmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
ERROR : Timed out( 100000 ): Interrupted Exception -
Processing idocs with status 8
hi friends,
how to process idocs with status 8Hi,
Chek this thread which contains step by step procedure to process Idocs
mannualy process idoc
Also try these steps
1. Goto Infopackage
2. Click on the "Details" Tab of the Infopackage
3. Goto Datapackage which is currently process
4. Under the detail tab you can see
Date, Time, Record... in that you can also see IDOC#
5. Take the IDOC# and goto BD87 of the Sourcesystem
6. Paste the IDOC# against IDOC
7. Give IDOC Status = 64
8. Give Partner system = "Your Source System"
9. Execute BD87.
10. You will navigate to next screen
11. Maximize all by using "Expand Subtree" button on Menu
12. You can see "IDOC stauts " column with 64
13. Click on the row against to 64
14. Click button "Execute" on Menu.
15. Your IDoc will start processing
16. If it success IDoc status will be turned to 53 else to 51. -
"Error during application input" while processing IDOC with status 51
Hi ,
I tried to post an error IDOC with status "51" of message type FIDCC2 using program RBDINPUT, it just creates a message "Error during application input" . It is not calling the application dialog . Does anyone have answer for this?
Thanks,
Hemant.HI,
Kindly check the RFC entries in t-code SM58.
If any entries are their please release them manually selecting each one and press "F6".
Regards,
Anil. -
Hi ,
I want to reprocess successful IDOCs with status 3 again,how can I do that?
I think logically we can change the status other than 3 and use BD 87 to reprocess them?is this correct way?Idoc numbers would change or they would create new IDOCs?
thank you,
BabuHi,
You can use transaction BD87 to monitor the IDoc statuses.
and use the following programs to reprocess outbound and inbound error IDoc(s).
RBDAGAI2 - Re-processing of IDocs after ALE Input Error
RBDAGAIE - Reprocessing of Edited IDocs
RBDAGAIN - Process Outbound IDocs with Errors Again
RBDAGAIP - New Posting of Partially Posted IDocs
RBDMANI2 - Manual Processing of IDocs: Post IDocs Not Yet Posted
RBDINPUT
<b>Reward points</b>
Regards -
Performance issues in using RBDAPP01 for reprocessing iDocs with Status 64
Hi All,
I am using the Standard ABAP Program 'RBDAPP01' for reprocessing Inbound iDocs with Status 64 (Ready to be posted).
When this is scheduled as a job in background, I find that it opens multiple sessions and occupies all available dialog sessions.
This in turn slows down the entire system.
Also, I find the addition 'Packet Size' on the selection screen for the program.
Is it related in any way to the number of sessions the program creates?
Any pointers in resolving this issue will be extremely helpful.
Thanks in advance.
Regards,
KeerthiHi,
When you mention Parallel Processing, it becomes active only if I choose that particular option on the selection screen right?
In my case, I haven't chosen parallel processing, but still the overall system performance seems to have fallen very badly.
Now please correct me if my understanding is wrong.
If I increase my Packet Size, it should improve the system performance, but will increase my runtime for the selected iDocs.
But as I have not selected parallel processing in this current situatuon, it should not have any impact here.
Have I summarized it rightly?
Thanks in advance.
Regards,
Keerthi -
Hi
In we05 transaction i see one idoc with status 32.
Status text was: idoc was edited
T100 text was: change data record was saved..
how to overcome this staus to post the idoc in target system??Hi,
RBDAGAIE - Reprocessing of Edited IDocs .
The above Standard program is for Reprocessing Idoc's.Go through this program.So that u will rectify that error.
Note: -
Description: This report reprocesses an edited IDoc in inbound or outbound processing. The edited IDoc has one of the following statuses:
32: IDoc edited (outbound)
69: IDoc edited (inbound). -
Reprocessing IDOCS with status 52
Hi all,
I facing a problem with IDOC status 52.
After correcting the error it had given, I want to reprocess it again.
Kindly tell me any report or transaction name for reprocessing IDOC with status 52.
Regards,
RahulHi Rahul,
You can use the below Programs for IDocs Reprocessing:
RBDMANI2 : Reprocess Idocs manually
RBDMANIN : Posting of IDocs with Status 51
RBDMOIND : Outbound Idocs status 03->12
RSEOUT00 : For Processing 30 Status IDocs
RBDAPP01 : For Processing 64 Status IDocs
RBDAGAIN : Reprocess Incorrect Outbound IDocs
RBDAGAI2 : Reprocessing of IDocs after ALE Input Error
Regards
Aneesh. -
Network printer error: the 'ipp' process stopped unexpectedly with status 1
i have [3] macs connected to my studio airport extreme network. i have a powerbook G4, with our plotter and epson photo R1800 connected to it. my mac book pro can print to the epson just fine, but my primary workstation [G5] will not print to it. i get an error message "the 'ipp' process stopped unexpectedly with status 1". please help, i need to print.
- all printers are excessable and work via the airport network
- the printer is available in the shared printer list [duh]
- as stated above the printer connection trys to open than shuts down, over and over.
- the epson use to be connected directly to the G5 and worked fine, the G4 as the proper driver and can print files fine.You might try checking the Console log (in Utilities/Console) and look to see if you have this error:
Dec 19 00:22:33 PowerBook crashdump[367]: PrintJobMgr crashed
Dec 19 00:22:33 PowerBook crashdump[367]: crash report written to: /Library/Logs/CrashReporter/PrintJobMgr.crash.log
You can also look in the above referenced /Library/Logs/CrashReporter/PrintJobMgr.crash.log file for any Exception for the PrintJobMgr process.
This currently seems to only affect PPC but not Intel processors. Is this the same for your case?
Message was edited by: kae -
Reprocessing IDOC with status 52
Hi,
I got status 52 for one of the IDOCs, I want to reprocess it . When I use BD87 & BD73, those are not working.
Please tell me any other way to process it.
Thanks & Regards
VijayHi..Vijay,
There are already many threads with the same question.
pls search for your query before posting.
Eg:
Re: Idoc status 52 -> How to make it green i.e. 53
Reprocessing IDOCS with status 52
regards,
Padma -
How to change the UDT's Status other than Open and Close ?
Hello Friends,
I have created an table of document type and I want to set the document Status other than open and close for eg.R- Released .
Thanks in advance.I think if you're using a UDF to set this Status for Marketing documents
First you need to set what item corresponds to each Status level you're tryinf to deploy
After that you can use SDK to set this new property or Formatted searches to change the Status you re creating, and save the document as a draft during your process and your status.
But if you're trying to change the fiel Status used on every Marketing document (i mena the system one), you should know that it is impossible 'cause this is an only read system field.
Hope it helps
Gabriela -
5 IDOC with status 29 Error in ALE service
hi there,
im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
IDOC Status Outbox:
IDOC failure between 13/07/2008 to 14/07/2009
1 IDOC with status 02 Error passing data to port
5 IDOC with status 29 Error in ALE service
IDOC Status InBox:
88 IDOC with status 51 Application document not posted
regards
rajuHi,
Check this thread.
DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Regards. -
Generate IDOC with status lanced (03)
Hello,
I need to generate IDOC with status lanced. I don't need program like RSEOUT00 but a module function.
Thnx.Hello,
In partner profile (WE20) Outbound options tab, select radiobutton 'Transfer IDOC Immediately' in output mode. So IDOC created in status '30' will be passed onto port (03) immediately without you having to run the program RSEOUT00.
Thanks,
Venu -
Mark as deteled idoc with status 40
Hello,
I have to mark as deleted an idoc with status 40. If idoc has other status (for example 51), I can do it from transaction BD87. But is not possible with status 40.
For your information, we're using realease 4.6 .
Thanks,
SenéHi,
Yes, we can't reprocess the IDOC with status 40. I have to mark as deleted this idoc. And with other idocs we are using BD87 to mark as deleted.
How can i mark as deleted this idoc?
Thanks,
Sené
Maybe you are looking for
-
Reading data from a text file into PAS - Dimension member names truncated
Hi, I created a procedure to dump variables and data into a text file to load into another model. I used a semicolon as a field seperator. The data, measures and dimension members are dumped properly into a text file and no dimension member names are
-
my son had both his and his sisters i-pods charging when he logged on to i tunes now they share everything encluding the name i need help how do i set up a seprate account for my 8 year old. and get his music off of hers. I have been at this for days
-
ITunes Match - who keeps originals?
If I subscribe iTunes Match, do I keep originals of my songs in my imac, or they will be deleted from it and moved to cloud?
-
Hi guys, I would like to know if one can hide for default the menu bar at the right hand side of the start screen (BBPSTART) in SRM 5.0. I do not need the menubar to disappear! Just hide it when oen opens SRM Thanks for any reply, Aart
-
Hi Rajat, I build AQ project in Jdeveloper9.0.3.960 enviroment, and the soap message has been formed, when I press "send soap message" a message box appeared, which let me input the name and password, but it always shows wrong password message, I hav