Inbound Q error
Hi Experts ,
While monitoring the Inbound Q in CRM system , Q is in Status : SYSFAIL
Queue : R3AD_CRM_MKTPL_R3INT .
Error Msg : Updated BDOC status failed - Bdco not found .
Can someone help me to solve the issue
Thanks in Advance
Anudeep Paritala
Hi Anudeep,
Were you able to crack this...
Please let me know if you have a solution for this...
Thanks a lot in advance...
Regards,
Dharmateja Kancharla
Similar Messages
-
Permanent error in BPE inbound processing error
Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Seshagiri.Hi Praveen,
If the BPM goes in error due to "The incoming payload structure is incorrect (not matching message type structure of abstract interface)" , is there any work around?
Currently in my scenario BPM goes into error due to incorrect structure , error show up in SMQ2 . And the subsequent message also get stuck. What I have to do is to delete the queue in error and reactivate the queue manually.
Is there any way we can avoid this situation.
Thanks,
Pankaj -
Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"
Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
PraveenHello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log? -
IDoc adapter inbound channel: Error Fehler beim Le
Hello,
I have a BIG problem. I want to use IDOC - XI - IDOC. I have configured the connections. But when I send the Idoc to the XI. it returns a code in the SM58 "IDoc adapter inbound channel: Error Fehler beim Le" The Message comes cut, it doesn't return all the message. In the XI doesn't give me any error, nothing. The IDOC says thta it has been sent correctly (Code 3). How can I trace the IDOC from de sender to the XI?
I wanted to use the IDOC HRMD_A06 but now i'm trying with SYIDOC to see if it passes.
Can Someone help me?
Caller Function module Target system Date Time Status text
SRGEN13 IDOC_INBOUND_ASYNCHRONOUS RHXCLNT013 07.04.2006 10:06:46 IDoc adapter inbound channel: Error Fehler beim Le
Thank you
PMI want to know if the Connections have to have SNC?
I have read this in the note http://help.sap.com/saphelp_nw04/helpdata/en/ca/fafaf6dbc8b240b1cf4a88c40379b2/frameset.htm
Inbound and outbound connections should be secured by Secure Network Communication (SNC).
Is that correct? maybe that's why it says the that error
PM -
IDoc adapter inbound channel: Error Error when reading Exchange Profile
Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit NaikHello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik -
IDoc adapter inbound channel: Error Error while read
Dear All
I am sending idoc from SAP 4.6C to PI. But on SM58 I am getting an error
IDoc adapter inbound channel: Error Error when reading
Which is not complete because field length is 50 characters , double clicking on this message is asking for message class. How can i see the complete message.
Can any one send me configuration detail of receiving IDOC at PI end , I don't want send to it forward from PI.Please clear these points.
In PI system:
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system.
3. Using IDX2 import the IDOC meta data in to your PI system.
RFC destination to which direction , towards sender of IDOC ?
Port of which system sender system or receiver system?
What about configuration in Integration Directory , is there any configuration required on integration repository and on integration directory.
What will be the procedure of seeing complete message on SM58.
-->In PI system while ur creating the RFC destination of type 3 give the hostname and system number of ur R/3 system ie SAP 4.6 c.
-->In PI create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system and in that RFC destination option, maintaine the destinatination name which we created using sm59.
-->coming to IR you need to create the:
1. Receiver data type.
2. receiver message type
3. receiver message interface. No need to create the above 3 for sender.
4.while mapping source is your Idoc and target is your receiver message type.
5. while interface mapping source is Idoc and target is receiver interface.
-->Coming to ID no need to create sender communication channel and no need to create sender agreement.
-->create receiver communication channel and receiver agreement.
--->create Interface determination.
-->create receiver determination.
-->If message got stuck in SM58, unlock it by using double click or activate the selected message.
Thanks -
Inbound IDOC error 51 Application Document not posted
Inbound IDOC error 51: Item: 002 Goods/Service number not entered So application document not posted.
Please help me outhi
check whether service number is available in the idoc if not check the field mapping -
IDoc adapter inbound channel: Error Connection err
Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
PraveshHi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha -
Inbound plug error in so_basket
Hi
we are getting inbound plug error in so_basket. it is working in one client, but it is not working in other testing client. do any body have idea about this inbound plug error.
regards
ramRam,
Did you check your navigationa link. Are the names exactly same ?
Cheers,
Ankur -
MARS - inbound packet error rate high for unrouted VLAN
After upgrade to 4.2.2, we are getting lots of inbound packet error rate high for some unrouted vlan in Cisco 6509. I did some sniff and find that MARS try to get ifInErrors of those unrouted vlan. But the unrouted vlan only support ifOutUcastPkts and ifInUcastPkts.
I just wondering is there some bug in the MARS or there are some kind of database corruption.Any reason you wouldn't just create a drop rule or modify the inspection rule that is firing?
btw, have a look here to make sure it isn't the same issue:
http://groups.google.com/group/cs-mars-ug/browse_thread/thread/9431fe079f7245ef/f4516dea991132da?lnk=gst&q=ingress&rnum=1# -
Post PGR at Inbound delivery error
Hi guys
We are trying to Post PGR at Inbound delivery
Error : E M7 022 10 PL Stock in transit exceeded by 1 00 : 2182597
Please suggest a solution
Thanks in Advance
Satyam Madhu babuyou have less stock in transit than you would like to receive.
so you can either receive one less or post one more into transit before you receive. -
Inbound qRFC Error/unwanted BDoc's on SolMan
Hello,
I experience the problem described in Note 1960627 - Inbound qRFC Error/unwanted BDoc's on Solution Manager System.
I would like to deactivate the creation of the BDoc's in SMW3_00 but am at a loss here: How do I actually do it?
Best Regards and thanks for your help in this !
ThorstenPlease check dumps in ST22 and for the mentioned job in SM37 (RDDEXECL).
Markus -
Scheduling agreement inbound idoc error.
Hi Experts,
I am creating an Scheduling Agreement with DELFOR02 inbound idoc, while creation the Scheduling Agreement system is giving error regarding Scheduling Agreement not found. In fact I have create the Scheduling agreement by T-code VA31. And I check the table VLPKM, there are relevant record stored.
Then I maintain the view V_T663A to not check everything when inbound idoc recevie. and tried agan in t-code BD87. the system give me another message Make an entry in all required fields.
How can I handle these error messages?
Thanks..
Regards....Does any one has ideas for that?
Thanks. -
Inbound Proxy Error - JDBC to PROXY Scenario
Hi experts,
I am getting the following error while activating Inbound Proxy.
Error when creating service node. [unknown]You are not authorized to use function Netzwerkadministration
Exception of class CX_SRT_WSP_ICF
Regards,
SudheerHi Experts,
Thank you for your replys.....Problem got solved......:)
Some authorisation was missing...Now it was fine and I can activate Inbound proxy......:)
Once again Thank you for your replys.....:)
Regards,
Sudheer -
Hi Gurus,
I am facing a problem with inbound RFC Queue,error message is logical system not defined in table smof_erpsh.
i hav e cheked the table but not too sure about how to activate the queue.
please help.
Regards,
SamarjitSounds like you switched backends on the CRM system. You can only have one ERP backend connected to a CRM system, in a normal typical landscape without special customizing.
You may also had a system that was copied from the original backend that is now trying to send bdocs to your crm system. Can you tell us a little more about your system landscape and we can then see what needs to be done? -
INVOICE EDI Inbound IDOC error
Hi,
We have implemented Support pack SAP_APPL SAPKH47027. And now we get
the Following error in IDOC inbound processing message type INVOIC during intercompany billing to post vendor invoices.
Error message: 'Field BSEG-BSCHL (1) (is not an input field)'.
I find that this is due to the OSS note: 960639 that has come along
with this Support pack.
Also SAP has mentioned a corection note to this problem. OSS note:
1032469.
But this Note 1032469 is not clear.
It is mentioned that..
"You explicitly enter the tax amounts in the IDoc
You can enter the tax information either at item level in
segment E1EDP04 or in header segment E1EDK04."
Is SAP suggesting to enter the TAx amounts (E1EDP04-MWSBT)?
And shud the coding be done during the Inbound processing function
module:
IDOC_INPUT_INVOIC_FI or during the outbound processing RSNASTED
(EDI_PROCESSING). We use SAP standard functionality.
Can anybody please explain what SAP has suggested to do techincally.
Regards,
Midhun.Hi,
I checked both OSS note 960639 & 1032469. I neither find anything in first note ( 960639 ) which could cause this probem nor in the second note ( 1032469 ) which solve this problem. The only way to check is by doing what note 1032469 is saying.
One more thing you can do is debug the code, put the break-pointe message statement and findout where this error message is coming. Then you can check the code to find out the reason for this.
Can you also check if you are getting the same message when you try to enter same data directly in SAP using FB01 or whatever the relavent transaction is.
Regards,
RS
Maybe you are looking for
-
Oracle 9i Support for multi language is not working.. Giving question mark
HI, We have an application which uses oracle 9i as the database. Riight now we are supporting only english and there is a requirement to support multiple languages like korean, chineese and japaneese. But we are planning to migrate one part of the ap
-
The different music genre pages in the itunes app are not appearing in ios 6
Has anyone else had this problem? The store works fine but the individual genre tabs appear blank
-
Acrobat Pro 9 distiller no name in rule
I have on my desktop the distiller running. With controlledfolders (hotfolders). But when I enter a new folder, in the list there will be a new folder but no name behind this. So when I heve several folders I can't see wich folder it is. Becauese the
-
Import TermSet CSV using client side object model
Hello, I want to import CSV in TermStore using client side object model. Unfortunately there is no ImportManager here. Is there any other way (Other than reading from CSV and adding term one by one to term store)? Regards, Nanddeep Nachan
-
I dumped my entire itunes library into the trash
Hello, I dumped my itunes library (25,000 songs) into the trash. It says I can not restore it, as I've tried. I then tried to just pull the music back into itunes from the trash, but I don't have enough room on my mac to copy them back. What can I do