Inbound queue error

Hi Gurus,
I am facing a problem with inbound RFC Queue,error message is logical system not defined in table smof_erpsh.
i hav e cheked the table but not too sure about how to activate the queue.
please help.
Regards,
Samarjit

Sounds like you switched backends on the CRM system. You can only have one ERP backend connected to a CRM system, in a normal typical landscape without special customizing.
You may also had a system that was copied from the original backend that is now trying to send bdocs to your crm system. Can you tell us a little more about your system landscape and we can then see what needs to be done?

Similar Messages

Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"

Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
Praveen

Hello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log?

SMQ2 (Inbound Queue) : Error occurred during character conversion

Hi,
In SMQ2 an Inbound Queue has failed with status text "Error occurred during character conversion". The XML message inside this queue is in waiting status with status text " Scheduled for Outbound Processing" .
Even after cancelling this message from SXMB_MONI, and reposting the PO, still again the queue and the XML message inside the queue are in same status.
As this is in XI production system, requesting to provide some suggestion ASAP.
Thanks,
Mateen.

The queue status is still sysfail. There is only 1 message waiting in the queue.
I think that the queue might be locked for some reason and after unlocking the queue and restarting the message, the message will get processed successfully.
But before working on this I want to make sure that the queue is locked.
Do you or anyone else know how and from where can I check whether the queue is locked or unlocked?
Regards,
Mateen.

Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
Mansi

Hi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar

BPM getting failed with unknown error in inbound queue

Hi ,
I am using BPM for simple IDOC collection( time based collection) .Its working fine also .However once it fail we can see the BPE failed in inbound processing error in smq2 and status is system faliure.
on debugging we can see a unknown error in transformation step that error in conversion [NN]. to proxy Z_interface name ( the proxy which automatically get created for transformation step. ) data related issue.
When we check the same input data in IR its working fine in message mapping . we are unable to find any other error either in BPM or in the input data.
The most surprising thing is that when we deleted the message from queue and re-triggered the IDOC once again from SAP system then its worked fine .
Can any body kindly suggest what can be the probable reason of this .As we are afraid that if the same thing will happen in production what we will do without any expalination we can't delete queue and retrigger IDOCs there.
Regards,
saurabh

One option would be to raise an exception for such steps....in the Exception handler you can repeat the same step....in your case it will be the mapping (n:1) .....are you sure that the process failed in Transformation step and that the data was correct....i mean all the 5 IDOCs were sent as an input to the mapping?
Can you ensure that during this time there was no connection issue between the BPM and the mapping runtime (IE)....may be you can check with your BASIS.
Regards,
Abhishek.

Error in Inbound Queue (Tx. SMQ2) / Error "CMW_PIF_PROTOCOL"

Hello everybody,
I have got a queue which appears time by time. It is called "ISP_I_000000000000017" in my Inbound Queue.
Below further information about that.
Information from Tx. "SE16" about this Error.
Client             010
Site-Typ-ID          GWA_01
ISP Queue-Typ        I
Log. Queuename       CMW_PIF_PROTOCOL
Queue-Name           ISP_I_000000000000017
Destination          ISP_I_000000000000017
Description        GWA_01/I/CMW_PIF_PROTOCOL
Has anyone an idea what's behind this? What is the pif-Protocol? How can I avoid this error in the inbound queue.
Every idea is appreciated.
Thanks in advance.
Kind regards Harry

One option would be to raise an exception for such steps....in the Exception handler you can repeat the same step....in your case it will be the mapping (n:1) .....are you sure that the process failed in Transformation step and that the data was correct....i mean all the 5 IDOCs were sent as an input to the mapping?
Can you ensure that during this time there was no connection issue between the BPM and the mapping runtime (IE)....may be you can check with your BASIS.
Regards,
Abhishek.

Inbound Queues stuck with RFC errors

Hi Experts,
Greetings for the Day !
We have BDOC related issue and we need your expert help ASAP in resolving the same.
We ahev a few BDOCS lying in intermediate state in transaction SMW01, which we found using BDOC monitoring on daily basis. When we check the same in SMQR - inbound queue, we found that the queues are stuck with an RFC error message.
We are re-activate these queues to actually resolve the intermediate bdocs. But, my query is
1> The raeson for getting these BDOCS in intermediate state & stuck queues
2> A permanent resolution for the same.
Please help and let us know if you need more details.
Regards,
Kanika

Hi Kanika,
RFC error can be due to a bad connection as well. If the server is down, there might be a problem in communication with the connected system and the queues will not be processed further. You need to reactivate or unlock to get the queues processed.
But if there are any specific errors for which the queues are stuck do state the same, so that we can look into an actual resolution.
Regards,
Venkat

Inbound Queues in XI --System error

HI Friends,
sceanrio : Outbound IDOC
I have observed some messages struck in inbound queue and first message stoped because of system error.
I know if we delete this message , rest of the message will restart and process it.
BUt i don't know , if i delete , what will happen to this message ? I can't resart bcz restart not possible.
2. If all messages in queue, and restart not possible then what is the solution ? only deletion or ?????
Deva

HI Deva,
Before deleting try to unlock the queue and re-execute the first message then remaining messages will process.If you are not able to resend the first message ....analyze the error why it is failing.
Finally if the above two options are not working then you need to Identify the first message and delete the first message informing business to resend that perticular message.
Regards,
Naveen.

Error in Inbound Queue : Internally required memory not available

Hi,
We are trying to send 110MB file from R/3 to Legacy thru XI. It is failing in XI inbound queue with error <b>Internally required memory not available</b>. When i saw memory usage in XI server it is using full 3GB of extended memory and entering in private mode. We dont have any problem upto 50MB files.
Please any inputs.
Regards,
Ranjeeth.

try to process the data by breaking the message into dependant segments

Parking error msgs from Inbound queue

Hi Experts,
There are situations when an inbound queue (SMQ2) gets build up because of an error msg. In this case, we manually cancel the error msg and allow subsequent msgs to get process. Is there any way using which we can park the error msg aside automatically (into some new queue, like an error queue) and allow subsequent msgs to get process. This will prevent queues from building up and we can fix all the error msgs at later point of time by checking them from newly created error queue.
Thanks,
Aditya

Hi,
PI 7.3 has the feature of parking the error queues aside and allows the other messages of queue to process....
I heard this feature is downported to the PI 7.1 also...but no hands on or more info at hand on this...if your are using 7.1 check the sap site...
Apart from that try to check for activation of CCMS alerts so that person is notified in case if message in queue gets blocked..
HTH
Rajesh

SYSFAIL error in Inbound Queue

Hi,
I got a SYSFAIL error in the Inbound queue. When I double clicked on it, it showed up the Status text as "An exception occurred that was not caught". This has been raised on 14-01-2009 (today's) date and when i checked for the B-Doc corresponding to this, i couldn't find out any entry for this.
Initially i tried unlocking the queue and thereby re-processing it, but it failed again.
The details are:
Function Module : BAPI_CRM_SAVE
Queue name : R3AD_SALESDO0004700954
Date : 14-01-2009.
Any pointers on this would be of great help.
Thanks in advance
Rasmi.

1. Check in Tx: ST22 (ABAP Runtime Error). That would give you more insight in the cause of exception / dump and how to solve it.
2. Also, in parallel check whether the connection to ERP is established and the RFC call is getting connected (Tx: SM59).
3. If the error/exception/dump is occuring on ERP side, check whether CRM server details are maintained in table: CRMRFCPAR (on ERP side).
4. Check whether internal user exit is coded to catch the exception and throw out appropriate error.
5. check whether there is any code error in mapping module (available in table SMOFSUBTAB).
These steps might be useful to find out your problem.
Best Regards,
Pravin..

Invalid Flow Context error in Inbound Queues

I am new to CRM middleware.
We are getting lot of entries in CRM Inbound Queue (SMQ2) in our production system with error description,
"Invalid Flow Context".
The queues are of type, "R3AD_CONNOBJXXXXXXXXXX" and the FM the error was caused in, is "BAPI_CRM_SAVE".
Can anyone help?
Thanks in advance!
Rajiv

Thanks Rohit,
When I debugged an entry with this "Invalid Flow Context" error, In method, CRM_GENERIC_CRM_IN, in the call to function, SMOF0_READ_SMOFSUBINT, in read statement,
   read table t_smofsubint binary search
           with key objclass = i_objclass
                    objname = space.
I am getting sy-subrc = 4.
i.e. entries do not exist for SI_POD in table SMOFSUBINT.
Has this behaviour got anything to do with this error?

Conntrans u2013 initialization error and Client console show no inbound queue

Hallo,
I installed Communication station and Client application to two computers. Test from Communication station to CRM is OK, test from client to Communication station is OK too. When I run Conntrans it show: u201CError during Conntrans initalizatin; contact system administratoru201D. In log file is:
Exception in CGUIDlg::CreateComObjects_AltThread . Was comerror exception (Neplatný ukazatel hr:80004003); technical hint: Create InitPar NamedCollection</SESS_LOG_TEXT>
</SESSION_ENTRY>
Client console show me, that I have u201CNo unprocessed messages available in the queueu201D. But in transaction smq1 I have 923 entries to send to Mobile Client.
I regenerate metadata, reassign siteID and did transaction table again, but still no messages in inbound queue.
Configuration: CRM 2007, CRM Mobile Client 6.0 SP02.
Can anyone help me please with these problems.
Thank you very much.
Jiri

Hallo Wolfhard,
thank you very much for your help and fast reply. I uninstall .NET 1.1 on client side (I had both .NET 1.1 and 2.0). Now I can run Conntrans. When I try synchronizaiton, it wrote "initializing transfer process" and after few second Conntrans fell down. In log is no error - everything have succeeded. I include ending part of log. In Client console inbound queue is the same.
<SESSION_ENTRY>
<SESS_LOG_ENTRY_ID>43090EC6134E43479082B5043DD7E18F</SESS_LOG_ENTRY_ID>
<SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
<SESS_LOG_TYPE>I</SESS_LOG_TYPE>
<SESS_LOG_DATETIME>8.7.2008 15:04:19</SESS_LOG_DATETIME>
<SESS_LOG_TEXT>Returning from CGUIDlg::OnInitDialog...</SESS_LOG_TEXT>
</SESSION_ENTRY>
- <SESSION_ENTRY>
<SESS_LOG_ENTRY_ID>A49BAA7D177D463491F635F8A64591E6</SESS_LOG_ENTRY_ID>
<SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
<SESS_LOG_TYPE>I</SESS_LOG_TYPE>
<SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
<SESS_LOG_TEXT>Call to CGUIDlg::OnInitDialog in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
</SESSION_ENTRY>
- <SESSION_ENTRY>
<SESS_LOG_ENTRY_ID>F5AE51A961664408830DDF07DA60C1F5</SESS_LOG_ENTRY_ID>
<SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
<SESS_LOG_TYPE>I</SESS_LOG_TYPE>
<SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
<SESS_LOG_TEXT>Call to GetConfigurationDetails in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
</SESSION_ENTRY>
- <SESSION_ENTRY>
<SESS_LOG_ENTRY_ID>1163EBE1ABB249ECAE0D3B230E6CCBB8</SESS_LOG_ENTRY_ID>
<SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
<SESS_LOG_TYPE>I</SESS_LOG_TYPE>
<SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
<SESS_LOG_TEXT>Call to InitConfiguration in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
</SESSION_ENTRY>
- <SESSION_ENTRY>
<SESS_LOG_ENTRY_ID>BE6FFFFE896D410A80D58C020195B56D</SESS_LOG_ENTRY_ID>
<SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
<SESS_LOG_TYPE>I</SESS_LOG_TYPE>
<SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
<SESS_LOG_TEXT>Call to CreateAndPlaceControls in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
</SESSION_ENTRY>
- <SESSION_ENTRY>
<SESS_LOG_ENTRY_ID>FD53890701BA40AE8DADB1F9701FDCFC</SESS_LOG_ENTRY_ID>
<SESS_LOG_SERVICE_NAME>GUI</SESS_LOG_SERVICE_NAME>
<SESS_LOG_TYPE>I</SESS_LOG_TYPE>
<SESS_LOG_DATETIME>8.7.2008 15:04:20</SESS_LOG_DATETIME>
<SESS_LOG_TEXT>Call to TaskBarCreateIcon in CTSDialog::OnInitDialog succeeded</SESS_LOG_TEXT>
</SESSION_ENTRY>
</SESSION_ENTRIES>
After I applied note 1071267 on Client 6.0 SP02 I could not run Client Console. When I run it, I got "Failed to load control sbtstatus. Your version may be outdated. Make sure you are using the version of the control that was provided with your application". Conntrans after fix I can run, but it is the same as above - it will fell down after few second of synchronization.
My version of librfc32.dll is newer, so I did not applied note 1074669.
I will try to uninstall client side and apply note again to clean installation if it helps.
Thank you very much. With regards
Jirka

Queue with error in Inbound Queue SMQ2 can not de deleted

Hello,
We did the replication of Materials and Services correctly.
However, in the SMQ2 trx. (inbound Queue in SRM 5), we keep seeing the following queues:
R3AD_ATTRIBUTE
R3AD_CONDITIONS
R3AD_LEDELIVERY
R3AD_OBJCL
These queue have status "SYSFAIL". We want to get rid of these queues but upon deleting them, they keep appearing again the folowing day!
How do we have to proceed?
Thanks for any reply.
Aart

Thanks Dean but it did not work.
The queue´s keep coming back.
The message of the SYSFAIL is now:
SR053 - No mapping function module entered in SMOFSUBTAB
Any clues?
Thanks,
Aart

Error in inbound queue

Hi,
I have to monitor queues, when i use tcode smq2 for inbound queues, i see 4 queues with stuck messages. The status is sysfail, so i do like this edit-> reset status ,then the status of the message has changed to transaction recorded. now i went to previous page and click unlock. when checked the first message status, it is XI restart in qRFC not allowed.
Suggest me where i went wrong and what to do to solve the issue.
Thanks
Jhansi

Dear Jhansi,
in his answer Chirag exactly describes how to proceed in this situation. For further information on how to process failed XI messages you might also have a look at OSS note 813029.
Best Regards,
Harald Keimer
XI Development Support
SAP AG, Walldorf

Inbound queue error

Similar Messages

Maybe you are looking for