Inbound Queue R3AD_SAL_ERR in Status SYSFAIL
Hi
In CRM 2007 i get this inbound queue R3AD_SAL_ERR in status SYSFAIL.
Could you please let me know why this error occurs and the steps to solve this error.
Regards
Masthan
Hi Masthan,
I hope the below mentioned notes will help you to some extent :
1372859
608332
Thanks and Regards,
Vignesh Ravikumar
Similar Messages
-
Messages stuck in Inbound Queue with Ready Status
Hi All,
The messages in the Inbound queue are getting stuck in Ready status.
I have to manually Unlock each queue to start the processing.
After some time again all the message queue are back to the Ready State.
Please help me on this issue.
Regards
Milango to --> sxmb_adm
Manage Queue
Select all Queues, Activate Queues.
& check your scenarios, now it will not stuck due to this error. -
Inbound-Queue - Set Queue To Retry via Coding
Hello Experts,
I am just implementing a MEP-Scenario and facing a problem in timing.
Because of Missing Data delivered via RFC from other system i need to set an inbound-queue (R3AD...) to waiting and retry.
Is it possible to do this via coding?
When I fire an error message (type EAX) the queue gets in status "SYSFAIL" - but in this case it will not automatically retry again.
Any hints are appreciated.
Thanks
MarioHi ,
You can deregister the inbound queue R3AD* from SMQR tcode and the other way is You can write a program to start the inbound queue processing which has a status 'SYS-FAIL'.
Thank you,
Gangadhar.S -
Dear all,
While doing CCR i am getting the error with queue status as "SYSFAIL" in inbound queues of APO, When displyed the same saying " Enter Purchase Group" When displayed data from LUW in binary code shows material as semifinished material is it right?
I am unable to find out the material for which it shows this error, This error apperaed first time.
Please help me out How can i trace this error.
Regards,
AmolHi,
What says the application log (SLG1)
You can look there by the "TID of First LUW" entry and search by "External ID" field in SLG1.
Usually from there you can get order number, material number, plant and some other useful data. Does it bring more light?
btw. "Enter Purch. Group" error usually is seen in the inbound queue, when the purchasing group of the material master is not maintained. See SNP2 tab of the material master - it should be filled.
br,
Mikhail -
Materials replication and R3PRODSTYP - SYSFAIL in inbound queues
Hi,
We are using SRM 7.0 and we have a problem in materials replication. In inbound queues we have the status SYSFAIL and the following error:
R3A* Error in Mapping (Details: transaction SMW01)
In SW01 the error messages are: u201CDownload inicial material: Table not supported by functionu201D and u201CCategory for material type MAT_Z001 does not existu201D
We did the initial download of DNL_CUST_PROD1 and the materialu2019s group corresponding to R3MATCLASS were replicated successfully. However 2 product subtype, corresponding to R3PRODSTYP, were not replicated.
Thus, the materials are not being replicated.
Do you have any ideas?
Thanks in advance,
Best regards,
ANWe already did the initial download of DNL_CUST_PROD0, DNL_CUST_PROD1, MATERIAL...
The problem is that there are two material types that at this time donu2019t exist in R/3 and when we do the material download those material types are trying to be replicated...
Any help?
Thanks!
Best Regards,
AN -
SYSFAIL error in Inbound Queue
Hi,
I got a SYSFAIL error in the Inbound queue. When I double clicked on it, it showed up the Status text as "An exception occurred that was not caught". This has been raised on 14-01-2009 (today's) date and when i checked for the B-Doc corresponding to this, i couldn't find out any entry for this.
Initially i tried unlocking the queue and thereby re-processing it, but it failed again.
The details are:
Function Module : BAPI_CRM_SAVE
Queue name : R3AD_SALESDO0004700954
Date : 14-01-2009.
Any pointers on this would be of great help.
Thanks in advance
Rasmi.1. Check in Tx: ST22 (ABAP Runtime Error). That would give you more insight in the cause of exception / dump and how to solve it.
2. Also, in parallel check whether the connection to ERP is established and the RFC call is getting connected (Tx: SM59).
3. If the error/exception/dump is occuring on ERP side, check whether CRM server details are maintained in table: CRMRFCPAR (on ERP side).
4. Check whether internal user exit is coded to catch the exception and throw out appropriate error.
5. check whether there is any code error in mapping module (available in table SMOFSUBTAB).
These steps might be useful to find out your problem.
Best Regards,
Pravin.. -
BP Creation in CRM- Queues stuck in SMQ1 - SYSFAIL Status
Hi ,
When we create a BP in CRM , The BP Queues R3AUBUPA* has are stuck in SMQ1 in CRM with status SYSFAIL . The detailed Error description is " Function module "CRM_BUPA_BDOC_MAP_NUMRANGE" not found"
We have already maintained the following entry in table CRMC_BUT_CALL_FU in CRM with call indicator set.
Event Object Item FM
CRMIN BUPA 50000 CRM_BUPA_BDOC_MAP_NUMRANGE
Do we need to maintain this FM somewhere else?
Help us to solve this issue.
Regards,
Shaikhi Shaik
How did you solved this -
Messages in inbound queue in status-RUNNING and it is too slow
Hi Experts,
We have a issue there are tons of messages in inbound queue in status-RUNNING and it is too slow!, hence there are more messages getting in the queue every minute.
This is Production enviorment.
We have priority queues
QIN is waiting status.
De-register will not work due to loss of messages fear
Please advice
thanks and regards,
krushiHi,
If the queues are hanging due to peak load at sometimes
you can schedule following reports to restart them automatically
(dont have to lock and unlock manually)
RSQIWKEX - Inbound Queues
RSQOWKEX- Outbound Queues
Also you can save the first entry of the queue if its causing problems to process later- smq3
thanks
francis -
XI inbound queues status "RETRY" in a new XI Production system
Hi
All the queues (XBT00* AND XBT02*) in XI Production system are not moving. Status is "Retry" all the time. The system is idle. Do you know what is happening here?
I also see the following error in the queue:
Command to tRFC/qRFC: Execute LUW again
Also, lot of errors (below) in the system log (SM21):
XIRWBUSER - Communication Error CPIC return code 027
XIAPPLUSER - Perform rollback
Any ideas?
Regards
ChanduHi,
When any message is sent from any other system to XI, the Inbound queue in XI is processed in the following way,
1) AI_RUNTIME_JCOSERVER connects to the Java stack to execute the registered program AI_RUNTIME_<SID>.
2) When this connection is fine, then the queue is processed without any issues.
Now incase of Production system, which most likely to be a cluster system will fail because you'll find that AI_RUNTIME_JCOSERVER connection test fails, when you turn off one node. The reason being in visual administrator the JCo RFC Provider for the server nodes have not been maintained.
Solution:
Login to visual administrator, select the service JCo RFC Provider for both the nodes and set the value accordingly.
Ex:
SAP Cluster Virtual Name: XICLSTPROD
Hostname1: XIPROD1
Hostname2: XIPROD2
SID: XIP
CLIENT: 100
Instance No: 02
Values for Node1:
Program Id: AI_RUNTIME_XIP
Gateway host: XIPROD1
Gateway service: sapgw02
Server count: 20
Application Server host: XICLSTPROD
System number: 02
Client: 100
Language: EN
User: PI_JCO_RFC
Password: ***********
Values for Node2:
Program Id: AI_RUNTIME_XIP
Gateway host: XIPROD2
Gateway service: sapgw02
Server count: 20
Application Server host: XICLSTPROD
System number: 02
Client: 100
Language: EN
User: PI_JCO_RFC
Password: ***********
Change in the similar way for the other Programs registered.
This should resovle the RETRY issue in Inbound queue.
Hope this piece of information really helps.
Regards,
Kamesh -
Where to search for R3A* queues in status SYSFAIL in my system.
Hi Experts,
Can anyone tell me in which Tcode or table I can search for the below entries. I am trying to find out these entries as one of CRM team member had mentioned the below one.
R3A* queues in status SYSFAIL were detected in your system. As a result, changes in the R/3 system have not been updated in the CRM system.
Regards
Srujan KHi Muthu,
Can you please tell me what are these Queues belong to, meaning which is repsonsible for what in SRM?
R3AD_ATTRIBUTE
R3AD_CLASS
R3AD_CUSTOME0000000043
Do we as an SRM consultant have to monitor the SMQR queues also?
please clarify me on the above 2 points.
Thanks in Advance!!!
Regards,
Srujank -
Inbound queue with tons of messages in status- RUNNING
Hi Experts,
We have a issue there are tons of messages in inbound queue in status-RUNNING and it is too slow!, hence there are more messages getting in the queue every minute.
This is Production enviorment.
We have priority queues
QIN is waiting status.
De-register will not work due to loss of messages fear
Please adviceHi Priya,
The Q status is Executing forever, then there could be a dead lock inside IE, in processing the message and the system went into infinite loop. There is no otherway other than stopping(Lock immediately) the Q, and then unlocking it.
Also try deleting the redundant Enqueue process on Abap stack (rz10), and defining two enqueue processes enserver.exe on java stack one for ASCS, and one for SCS. You can find more information in installation guide for your XI type.
regards
Aashish Sinha
PS : reward points if helpful -
[Urgent] Queues are blocked in status SYSFAIL
Hi experts,
I have the following problem that arose unexpectedly in an XI 3.0 installation:
Queues are blocked in SYSFAIL status and when I click on one entry, I get message: XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue stopped
It seems to me that J2EE stack cannot connect to ABAP stack.
When I test INTEGRATION_DIRECTORY_HMI connection in sm59, I get no reply..
I cannot logon to Visual Administrator. It stops at 99%.
Hardly can I connect to Integration Builder.
Any ideas.
I need your help ASAP.
EvaggelosHi Evaggelos,
>I cannot logon to Visual Administrator. It stops at 99%.
Is your XI installation over?
We had a similar problem in one of my earlier projects. We restarted the server and everything started working fine.
If it is possible you can try the same.
Regards,
Sumit -
Blocked inbound queue RETRY status
Hi everybody
Sometimes I get this alert in the CCMS-> Transactional RFC and Queued RFC -> Inbound Queues->Int. Server Outbound Messages (XBQ0*)->Blocked queues:
Blocked inbound queue XBQ0$PE_W.... status RETRY...........
I can not get the isssue because it happend when nobody is monitoring the XI system. I want to see what happen at this time but I do not how to do it. When I see the inbound queues in the SMQ2 is empty. Could tell me someboy how to get the issue in a trace or log file?
The system works fine normally but it happens sometimes.
thanks in advanced.Hi Gerardo Mondragon
this issue is not very strange when some queue has very heavy load then for time being messages are queued in the queue and it throws exception and ccms alert is generated. after some time when the queue gets processed all the messsages you will not find any error
if you find error RETRY status in SMQ2 then right click in the last column and execute LUW
it will get processed and queues will be fine
then in RZ 20 you can complete alert
thanks
Sandeep Shrama
PS; if helpful reward points -
Inbound-Queue SYSFAIL: SQL error in the database when accessing a table
Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
brHi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br -
XI 2.0 Inbound Queue Sysfail problem
I am having a problem where my xml message is causing the 'xbtoljul' inbound queue to stop. Within the queue I can see a message with the StatusText of "XI message queue stopped due to internal error". Does anyone have a good suggestion for understanding how or why this message is in this state? Looking at the message using 'sxi_monitor' it looks ok, no errors or exceptions.
I'm having the issue. Did you ever get this resolved
Maybe you are looking for
-
Can Acrobat 9 Multi-Thread (use all my cpu cores)
i have several 700+ page thick PDF documents i want to run OCR on. i can batch run them just fine, however i cannot get adobe to use more than one core of my 8 core iMac. so the process takes needlessly long because 87% of my CPU power is just sittin
-
Hi, Our scenario is based on ECC 6.0 sp12: soon many web service wil be created on that system. For this purpose an installation of suport package 14 is sufficient (to get not obsole platform)? Instead it is better for us support package above or enh
-
I have about 1200 feet of old 8mm movie film that I would like to have converted so that I can import it into Apple's iMovie where I can edit it and make a movie of it and put it on a DVD with menus. What format do I want to have it converted to ? Wh
-
OracleService Broken by messing with PFILE
Anyone, I seem to have broken my Windows 2000 OracleService ability to startup my db when I was messing around with the PFILE paramter before knowing about the SPFILE<SID>.ORA now being used in 9.2.0.1 I basically issued a: ORADIM.EXE -EDIT -SID myse
-
I've started receiving alerts from websites like Pandora , et al that might browser needs to be updated. What to do? Does this require a new version of Safari? If so is there anything else I need to be doing or installing for compatibility? Model Nam