Inbound Queues getting stuck up in PI7.1 for Idoc scenario Mpackg. enabled
Hi Experts,
We have an issue while processing Single Idocs in PI 7.1.
we have extended MATMAS05 and we are processing these via PI to FTP folder.
The inbound queues are frequently getting stuck.we will be sending atleast 1000 idocs every hour from R3.The processing time is very slow for this interface and its impacting other interfaces which we are currenlty having.
We have followed the webblog by William Li "Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging" but still the processing time for Single Idocs is very slow.
We have to use single idocs as we will send only the changed materials from R3.
Could you please assist us in overcoming this issue.
Many thanks in advance.
Points will be awarded for valuable feedback.
Cheers
Jyoti
Hi Jyoti,
Message Packaging works PI7.0 SP 13 and PI7.1 .
we have to configure Message Packaging manually ,
Step 1) 1. Enable packaging for the integration server
SXMB_ADM -> Change Configuration (F9), create a new entry:
Category: RUNTIME (PI7.1)
Parameters: PACKAGING Current Value: 1 (for active) .
Default Value in PI7.0
Current Value: 0 (for inactive)
Step 2) Create "Package Configuration Type u201C
Use Transaction SXMS_BCM .
Configuration Type : Any name.
Description: any text to describe the configuration type .
Wait Time : 60 seconds
Number: 100
Maximum Package Size. 2 MB
Step 3) Create "Sender/Receiver Definition
Transaction : SXMSIF (Create New Entry).
Sender/Receiver ID:PACKAGE_DEMO .
Description :
Interface Name: Interface Name used in Receiver Determination.
Interface Namespace: Interface Namespace used in the Receiver Determination .
Step 4: Create "Specific Package Configuration"
Transaction : SXMS_BCONF .
Step 5: Package Monitoring
TX: XMSPKSTATCNF
Follow above steps and configire message packaging , then you feel diference,
actuualy i configured message mackaging,i am feeling the difference.
if any issues let me know.
Cheers,
Raj
Similar Messages
-
When I sync my iPad it gets stuck on "Finishing sync" for hours, do you think it's just a case of clicking on "restore" ? , Thanks
Same thing has been happening to me and I havent been able to find a fix. Itunes has basically rendered my phone uselsee. It wont see it, let alone sync it.
-
The deployment process seems to die or get stuck, iAS 6 SP3 for Solaris 8?
When I deploy my application in iAS 6 SP3 for Solaris 8 the deployment process seems to die or get stuck. In the shell window i get the messages
iasdeploy for iPlanet Application Server 6.0 SP3
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
sstu15:null
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
After this nothing happens for a really long time.
When starting the deployment I get in the beginning of kas.log two entries
ADMIN-168: kas> deployment get log ''J2EEInstallEar''
GDS-007: finished a registry load
but suddenly the second line disappears and the only message I get is the first entry. I need to break the deployment process and kill the processes manually.
When starting the application server I get two error messages:
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
iPlanet Administrative Server
Version 6.0 SP3, Build 20010704
Copyright (c) 1996-1997 KIVA Software Corporation.
Copyright (c) 1998-1999 Netscape Communications Corporation.
Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp
. All rights reserved.
Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
[14/Feb/2002 11:02:12:7] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
[14/Feb/2002 11:03:08:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
I think all processes starts OK, I get one for .kas and one for kas, one for .kxs and one for kxs and finally one for .kjs and one for kjs.
Is someone familiar with this/these problem(s)?It seems you are deploying a very big application. Try to deploy this application with following command
j2eeappreg <filename>
It should work fine. It was a bug with iasdeploy command in iAS SP3 which had been fixed in iAS SP4. -
SAP TAO | getting an error "replay Error" for the scenario
Hi,
I am getting the "replay error" for a scenario.
When tested the individual components, they were passing separately in HP ALM, but when consolidate all of those test cases in one test scenario then this error "replay error" is shown.
Could anyone help in resolving this issue.
regards,
Sunil KumarDear sunil kumar
You have posted the query in Career Center..
Is your question related about Career ???
Please read the document before posting any query.
Find Topic Spaces on SCN (Forums) -
Communication Channels for IDOC scenario
Hi!
I have a conceptual question regarding the communication channels within IDoc scenario.
Case 1:
- File_to_RFC scenario
Here I defined a File communication channel from business system A.
1a) For which system (business system A or B) do I need to define a IDoc communication channel?
1b) What is the RFC destination and Port I need here?
Case 2:
- IDOC_to_IDOC scenario
2a) Do I need in this scenario only one communication channel for business system A?
2b) What is the RFC destination and Port I need here?
Thank you very much!
Thom>
Thom Heinemann wrote:
> Hi!
>
> I have a conceptual question regarding the communication channels within IDoc scenario.
>
> Case 1:
> - File_to_RFC scenario
> Here I defined a File communication channel from business system A.
> 1a) For which system (business system A or B) do I need to define a IDoc communication channel?
> 1b) What is the RFC destination and Port I need here?
>
in this case no IDoc CC is involved. All you need is a File sender adapter and RFC receiver adapter
> Case 2:
> - IDOC_to_IDOC scenario
> 2a) Do I need in this scenario only one communication channel for business system A?
> 2b) What is the RFC destination and Port I need here?
>
>
> Thank you very much!
>
> Thom
in this case you will need a IDoc receiver adapter only.
The basic settings:
In XI
SM59 - R3 connection pointing to R3
IDX1 - define the port with the above dest.
In R3
SM59 - R3 connection pointing to XI
WE21 - define the port with the above dest.
WE20 - Partner profile type outbound/Inbound
Further ref:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized& -
Business system name important for IDoc scenario message routing?
Hello all,
I have following problem.
I have to setup with our client an IDoc scenario which is a little difficult.
The client sends project IDocs from Client ERP system to his own XI system next to our XI sytem and at last Internal Order IDocs to our ERP system. We use for each environments (DEV, TEST, PROD) a separately SLD, the client a central SLD. In each environments we use the same business name for our XI system "BS_XI". Now the problem. The client aren't able to configure two times the same business name "BS_XI" for routing to our TEST respective Production environment. DEV will not used. I know the B2B scenario should be used in this case but i have no chance to think about this. Manager decision!
So what can be the workaround.
I think about to provide our client a different Business system name "BS_XI_PROD" with different technical system informations for our PROD environment. So for my understanding, the business system name is unimportant in this case, important here the technical informations which you are able to see in "Display Adapter-Specific Identifiers". Technical system, Port and RFC configuration.
The namings convention for Business system is unimportant in this case, yes?
Many thanks in advance!
Regards,
JochenDear Jochen,
Can you please clarify a bit? Is it a problem between customer's XI system and your XI system?
I think you can use Parties here. In the Party you can define some additional identifiers, with which you can differentiate the incoming IDocs.
(e.g.: in the identifiers tab, Agency=BS_XI, Scheme=ALE#KU (defined in the customer's partner profile), Name=a defined name in the IDoc control record)
So with this you will have a "Business System+Party" as an identifier, where you can use several parties with the same business system.
I hope it helps!
Regards,
Andras -
Hi all,
I am doing an File to IDOC scenario.I have done with all the mappings and configurations in IR and ID.Please can anyone let me know the configurations that are to be done in R/3 and SLD for the posting of IDOC.
Please can anyone explain this to me.
Awaiting for ur reply
AmitHi Amit,
the following is from a thread/blog I cant find anymore. So I copy and pasted it!
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Regards Mario -
Package deployment keeps getting stuck with message 'Waiting for another program'
Hi, I just started working on SCCM. We have an Orchestrator runbook which creates a collection and then creates an advertisement for packages and task sequences. I was able to get a task sequence and a package successfully execute. When
creating the advertisement, I set it to RERUN_ALWAYS. However, the next time I ran our runbook which creates the collection andadvertisement (I manually deleted the previous one), it does create them but the deployment is stuck to In Progres with the
Description of 'Waiting for another program'. This just happens for packages before and not for task sequences the other day but now, it's the same issue whether I use a package or a task sequence.
I see this in execmgr.log:
<![LOG[Package UAT0007D, program Test is ready but can not be started because package , program is currently running.]LOG]!><time="17:07:20.993+480" date="02-06-2015" component="execmgr" context=""
type="1" thread="6804" file="executionrequest.cpp:9083">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramWaitingForAnotherProgram
AdvertisementId = "UAT2011A";
BlockingPackageID = "";
BlockingProgramName = "";
ClientID = "GUID:2FE27567-3215-4015-BE09-0E65F09767C8";
DateTime = "20150207010721.004000+000";
MachineName = "ACAA-UAT-SCCM";
PackageName = "UAT0007D";
ProcessID = 6316;
ProgramName = "Test";
SiteCode = "UAT";
ThreadID = 6804;
]LOG]!><time="17:07:21.010+480" date="02-06-2015" component="execmgr" context="" type="1" thread="6804" file="event.cpp:729">
<![LOG[Successfully raised SoftDistProgramWaitingForAnotherProgram event for program Test.]LOG]!><time="17:07:21.021+480" date="02-06-2015" component="execmgr" context="" type="1" thread="6804"
file="executionrequest.cpp:9128">yes check the exemgr.log file and also see is that package has dependency for another package? and if yes then that package is already available non DP?
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread. -
Hi,
My environment is VMware vSphere 4 with a few ESX 4 servers. On that, I have a vCenter, a View 4 server and SRSS. Then I have a number of Windows XP desktops.
When the user logs into his/her desktop via the Sun Ray, everything works including the local USB printer (an HP laserjet). But...you can only print once...then the print queue stays at "Printing" and won't go away. Any further print jobs just get queued up. It also won't let you delete the print job from the queue. The first print job actually does come out on the printer, but doesn't disappear from the XP's print queue.
Any ideas?
JimI can duplicate the "white screen of death" with Early Access to vmware view, with Rays running from Solaris/x86. This is in fact not vmware-specific, as I can hang uttsc to an ordinary XP system. To duplicate fairly reliably, I run a Flash example and then "start -> logoff". uttsc doesn't terminate, and truss shows repeated
/1: pollsys(0x08046690, 2, 0x08046728, 0x00000000) = 0
/1: ioctl(10, AUDIO_GETINFO, 0x08046620) =0
This doesn't happen if the IE window is terminated before logout. The behavior appears to be independent of "-F off" in uttsc (but I'm using the Ray audio driver).
Is there a workaround (other than downgrading) in the vmware view scenario?
Edited by: grommit on Aug 5, 2009 7:37 AM -
Aperture 3.03 when quitting gets stuck in "Updating information for preview
Hi there,
i notice that maybe 3 out of 10 times when i quit aperture, it hangs.
There is a progress bar at the top saying "updating information for preview images" (translated, so the english original may be a bit different) but the bar wont move, the disc doesnt make any sounds and when i look in the actvity monitor it says aperture has around 35 threads and uses 1% of cpu power.
i usually then force quite aperture after some time.
if seems to occur more often after emptying the trash.
any ideas?
i get rather frustrated with force quittung becaus i get the feeling its no good for my library, however i run into problems repairing my library as explain elsewhere.
alexanderAlexander, have exactly the same problem, as do many others:
http://discussions.apple.com/message.jspa?messageID=11628321#11628321
Hopefully there will be an update soon to fix it. -
Cloned volume gets stuck at boot "Waiting for Network File System"
I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
I am not trying to run from a remote or network drive, just a 2nd drive in my
G4 from which I have previously been able to boot (until this last clone attempt that is).
I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!Hi Kool,
So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
Bo -
I am trying to sync my i-pod to my computer thru itunes. I successfully synced my Ipad thru the computer, but am trying to do the same with the Ipod. The device shows up on my computer and appears to be syncing, but nothing changes. I have tried dragging the new music to the device, but a symbol appears with a slash thru the middle, as if denying access, any suggestions what to try next. I have synced on this Ipod succesfully in the past, Suggestions?
To drag and drop you have to use the Manual Method. That method is included here:
iTunes: Syncing media content to iOS devices and iPod
Was the iPod set up by wifi or setup or synced to another computer/iTunes library? -
IMovie gets stuck while creating thumbnails for iPhoto Videos
Hello,
I've just got iLife 09. When I opened iMovie (with all the latest patches) it asked me if I want to create iPhoto thumbnaisl. I said yes and iMovie started to do something. At a certrain point the progress bar stopped moving and didn't move until I killed iMovie. If I do the same now, not even the progress bar show up and "remaining time" keeps empty.
Can anyone tell me how to convince iMovie to create those thumbnails?
My iPhoto contains about 6000 images and 42 iPhone movies.
Thanks
BerndGive this sequence a try, it may help you isolate your issue:
_*RUN SOFTWARE UPDATE*_
Before starting the steps below, make sure you are running the latest software update.
_*REMOVE 3RD PARTY PLUGINS*_
Some 3rd party plugins may be interfering with iMovie.
Here are the only 2 files IN MY QUICKTIME FOLDER:
. . . . . . . . . . . . / Library / QuickTime / AppleIntermediateCodec.component
. . . . . . . . . . . . / Library / QuickTime / AppleMPEG2Codec.component
If you do have more than the 2 files listed above, temporarily move the "NON APPLE" components outside of the QuickTime folder, Reboot the Mac.
_*TEMPORARILY CREATE A NEW IPHOTO LIBRARY*_
_ Quit all your Apps
_ Hold-down the [Option] key and click on the iPhoto icon
_ Click "Create New.." and enter a new iPhoto Library name -- I used "Empty_Library"
_ Click "Save"
_ Quit iPhoto
_*FRESH LAUNCH OF IMOVIE*_
_ Delete the iMovie Plist: /Users/ {your username} /Library/Preferences/com.apple.iMovie8.plist
_ Launch iMovie
Does iMovie starts-up properly without your old iPhoto Library?
If so, your old iPhoto Library may contain a video file / files that are not compatible with iMovie.
_*TRY RE-LOADING YOUR OLD IPHOTO LIBRARY*_
_ Quit all your Apps
_ Hold-down the [Option] key and click on the iPhoto icon
_ Select your old iPhoto Library from the list
_ Click "Choose"
_ Quit iPhoto
_ Launch iMovie
Does iMovie starts-up properly with your old iPhoto Library?
If not, try removing the bad video file / files from your iPhoto Library (if you know which one it is).
Just make sure to back-up those files before removing them from your iPhoto Library.
Let me know if that helps. -
can anyone help me fix this issue. It is particularly annoying having lost all the music I have on my phone when all I do is listen to music.
Version 11.1.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
Getting Problem in Flat File to IDoc Scenario.
Hi,
I am facing problem which is as follows.
Test Flat File Contain Data As Follow
Field1,Field2,Field3
Field4,Field5,Field6
Field1,Field2,Field3
Field4,Field5,Field6
Field1,Field2,Field3
Field4,Field5,Field6
Source structure has only one segment with all six fields and is repeating.
What will be the file content conversion parameters so that it will pick first 2 lines and convert it into segment in this away.(I cant create two segments)
Thanks in advance.Hi,
I agree with Vijay.. so try to create the Data type like this..
Recoredset 0...1
-----Line1 0.... unbound
--------Field1 0...1
--------Field2 0...1
--------Field3 0...1
-----Line2 0.... unbound
--------Field4 0...1
--------Field5 0...1
--------Field6 0...1
Now do your FCC
Recordset Structure ---- Line1,*,Line2,*
Recordset per Message ---- 1
Line1.fieldNames ----- Field1,Field2,Field3
Line1.fieldSeparator ---- ,
Line1.endSeparator ----- 'nl'
Line2.fieldNames ----- Field4,Field5,Field6
Line2.fieldSeparator ---- ,
Line2.endSeparator ----- 'nl'
now map the fields as per your requirement.
Regards,
Sarvesh
Maybe you are looking for
-
My itunes won't sync my ipad and closes down in the middle of the attempted syn. I have windows 7 ultimate. Any ideas about what to do?
-
Creating action in CRM sales transaction to trigger RFC in R/3?
Hello gurus We wish to replicate our contracts from CRM to R/3 but since SAP is not supporting it, I heard that one option that we have is to enable actions in our CRM sales transactions, which when executed will trigger an RFC call to R/3 system an
-
30 to 24 frames, pulldown removal issue
I'm working at this animation place. The animators work with the live footage that comes in to composite their animations. So I have to convert each shot from 30 to 24 fps (it comes in at 29.97) So far the workflow has been export each scene using th
-
12" g4 laptop drive is there a size limit?
hi folks, Just made a BU of my 12' g4 DVI laptop using t-mode to g5 laptop, the g4 was acting goofy color wheel spinning for a very long time usb is out, I tried both I'm thinking reformat but if I need to new HD OK now which HD, what size, any other
-
Subscribe to podcast that is not available outside a country?
Does anyone know if/how I can subscribe to a podcast that is not available outside its "home" country? More specifically, I'd like to subscribe to this podcast: http://pod.drs.ch/diskothek_im_zwei_mpx.xml I can subscribe to it, but I only get "epi