Inbox behavior .mac account and iphone

should the inbox on the iphone be the same as the browser? nothing changes on server when i change on the phone. I have a .mac account that i access from the web....i am deleting new emails from my iphone, only to find i must do it again when i sign on to view from the browser. It's not moving inbox mail to trash on the server.....anyone know if this is just how the mail behaves on the phone or am i missing something? I would really like to delete on the phone and have it do the same on the server....
Message was edited by: TFree67

here's the bottom line....i move mail to the trash on the iphone, return to the server there is a copy of the email in the trash and a copy still in the inbox.....that is the issue i'm trying to resolve, the inbox of the server doesn't seem to match what the iphone does, i want to trash the email once not twice when i return to the server

Similar Messages

  • I have a .mac family account, a personal .mac account and separate iTunes id I use for my work iPhone and the associated apps.  How do I keep them separate in the iCloud change?

    I have a .mac family account, a personal .mac account and separate iTunes id I use for my work iPhone and the associated apps.  How do I keep them separate in the iCloud change?

    Welcome to the Apple community.
    Could you tell us a little more about what you want to do. Bear in mind that iTunes has nothing to do with your iCloud account.

  • IMAP setup for .Mac account and Gmail

    I've been trying to use my .Mac account and Gmail with mixed results. I have been using Mac mail for some time and have my folder structure setup for personal and work. Now I want to add a work Gmail account and simply have a separate inbox for the Gmail account. I store messages from both accounts into the folders I have in the .Mac account.
    Gmail caused all sort of issues using IMAP in this structure, basically creating another series of folders below the .Mac folder tree. The inbox structure was fine and I could stored Gmail messages into the .Mac folders. But there were duplicate copies of the messages in the Gmail IMAP structure. I wasn't sure if I should just delete the Gmail structure, but the duplicates were driving me crazy whenever I did a message search.
    Now I've backed Gmail down to POP and I have all sort of sync problems between my laptop and desktop systems. On my laptop it shows no mail, but when I check Gmail. There is mail in my inbox.
    Does anyone have an idea about how to use two IMAP accounts successfully in Apple Mail?

    Okay. This has got to be a common issue. And I think I have it solved.
    The secret is using an IMAP prefix of "IMAP" and then creatin labels of "IMAP/Foldername" on Gmail.
    It's all generously explained on these links:
    First setup IMAP on Google like this: http://mail.google.com/support/bin/answer.py?answer=77663&topic=12814
    Then follow the advice here: http://www.macosxhints.com/article.php?story=2008041016554622
    And more here for help with Mail and iPhone: http://5thirtyone.com/archives/862
    Things get cleaned up immediately! Ah ... bliss.

  • Is it possible to sync my mail folders/boxes between Mac mail and iPhone?

    Is it possible to sync my mail folders/boxes between Mac mail and iPhone? ie. I get an email on my iphone but I also read it and store it On My Mac folders.  Is there a way this can be set up 'same' on my iphone...then I would only need to read my mail one place? Same as my iPad...I'm tired of doing the same step 3 times ONLY because my folders are only on my MAC

    IMAP is a mail protocol. Your email provider must support it (most regular ISPs do not). If your mail provider supports IMAP then when you create an account on the iPhone choose "IMAP" when prompted. You cannot convert a POP3 account to IMAP; you must delete it and re-create it. But first check to see if your provider supports it. Microsoft Exchange works similarly to IMAP, but has the added feature of "pushing" mail to your phone within seconds of it being received.
    With IMAP and Exchange the master copy of all mail remains on the server until deleted. Your computer(s) and iPhone sync with the server, so all of your devices will show the same messages. When you delete from one the message will be removed from all with the next sync (or immediately for Exchange).

  • Hi  recently i changed my apple id for itunes and icloud for my mac ipad and iphone   for the ipad and iphone all is working well  but on my Mac  itunes is ok bit icloud is blocked into my old Apple id and i am not able to change it    Please help

    Hi i recently changed mi apple id for my Mac, ipad  and iphone    With great difficulty i managed to change my Ipad\Iphone id    for itunes and icloud
    But on my mac, itunes is ok but icloud is blocked on to my old Apple id         I thought it would would automatically sync when ichanged the id in itunes
    Obviously not    Can somebody pleas help   Thanks

    You need to go to System Preferences (this may be called Settings in Mountain LIon)>iCloud and sign out. Then sign in with the new ID.

  • I just rebuilt my mail inbox, 1 iCloud account and 2 other imap accounts, and everything is gone. Nothing on the remote servers either and on all my iCloud sync mobiles. How can i recover all my emails? Thanks

    I just rebuilt my mail inbox, 1 iCloud account and 2 other imap accounts, and everything is gone. Nothing on the remote servers either and on all my iCloud sync mobiles. How can i recover all my emails? Thanks it's all my work!!!!!!!

    we do what your doing... we use the same ID for "Icloud".
    We do NOT use the same ID for:  Face time and Imessage

  • Can I seamlessly toggle Apple TV between Mac Mini and Iphone / iPad?

    I am having a Mac Mini, iPad, iPhone and Apple TV. Currently i am using 2 HDMI cables 1 between TV and Mac Mini and 2nd between TV and Apple TV. Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV; it becomes an issue.
    Can I seamlessly toggle Apple TV between Mac Mini and iPhone / iPad?
    Regards,
    Mahendra Panchal.

    Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV;
    Toggle how?  What are you doing?  Why do you have the MacMini connected to the TV?  That is the whole point of AppleTV.  It is a simple way ( in therory ) to get your content to your TV without having to plug your computer in to your TV.
    it becomes an issue.
    What does?  What is the issue?  What specifically fails or does not work?

  • IChat 4. Using my .mac account and my AIM account simultaneously

    Can I set up my .mac account and my AIM account with different Names and Pictures? At the moment, every time I change one the other one changes too!
    Do I need to alter the Server Settings and Port for each account? If so, to what do I change them to?

    Hi,
    You can have both open and show Both Buddy list.
    Same Picture though in All Buddy Lists
    3:52 PM Sunday; November 11, 2007

  • Graphite base station not working with my Intel Based Mac Mini and iPhone.

    My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
    Message was edited by: Soriano

    I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
    In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
    The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
    The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
    After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
    The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
    I hope this helps.

  • I want to buy a iPad2 to go along with my mac desktop and iPhone, do I have to purchase the same apps. to put on my iPad

    i want to buy a iPad2 to go along with my mac desktop and iPhone, do I have to repurchase the same apps. to put on my iPad?

    You can use most of the apps that you bought for your iPhone on the iPad as well. Sometimes the apps are not optimized for the iPad's larger display. Sometimes the apps are limited to the iPhone and you must purchase a separate iPad version. As with your iPhone, Mac apps cannot be used on an iOS device.

  • HT4972 Can I upgrade my iPad 1 to the ios5, and can I upgrade my snowleapord to mountain lion on my Mac book pro so that I can icloud my iPad, Mac book and iPhone 4s.pls help

    Can I upgrade my iPad 1 to the ios5, and can I upgrade my snowleapord to mountain lion on my Mac book pro so that I can icloud my iPad, Mac book and iPhone 4s.pls help

    Can I upgrade my iPad 1 to the ios5,
    Yes.
    ... and can I upgrade my snowleapord to mountain lion on my Mac book pro
    Maybe.
    Read here for Mountain Lion's system requirements: http://support.apple.com/kb/HT5444

  • How to push EAP-TLS configuration Profile and Certificates to Mac books and Iphones

    Hi Team,
    We were able to push the EAP-TLS configuration profiles and certificates to windows devices via group policy.  However, we're now looking to see how we can accomplish this for Mac book and iphones?  Is there an open source application or something we can leverage to do this?
    Thanks

    I think ammahend was looking for a rough count which is what my question was going to be. The reason I would ask this is that if the device count is low then you could manually provision certs on those devices. Not ideal since you will have to manually generate CSRs, get them signed and then installed on the machines.
    Another way to do this is if you have an MDM solution in place. You can have the MDM integrate with your CA via SCEP and then on-board devices that way. You don't have to integrate ISE with MDM (advanced licenses needed) as you can only have ISE check for the cert and only perform EAP-TLS authentications. 
    Hope this helps!
    Thank you for rating helpful posts! 

  • I'm trying to set up Continuity with mac mini and iPhone 5s and not working

    I'm trying to set up Continuity with mac mini and iPhone 5s and not working, bluetooth not pairing

    Your Mini is not supported.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity

  • Changed .Mac Account and Purchased Songs No Longer Available

    I purchased over 100+ songs from the iTunes store on a Windows machine. After purchasing a new PB and a .Mac account and configuring the account with a new .Mac address, I can no longer play any of the songs I purchased. I receive an error messaage "This computer is not authroized to play XXX. Would you like to authorize it?"
    The prompt for the Apple ID login defaults to my old account, not the new .Mac account. If I use the old credentials, I receive an error that the account does not exist (?!?!). Using the new .Mac account particulars does not resolve the issue.
    I emailed Apple Support over a wek ago, yet have not received any reply.
    Any response, clue, explanation would be greatly appreciated!
    Dreading he is out a few hundred bucks,
    Scott

    THeres really no tellin what happened, could of been windows restored itself, antivirus interfering with itunes ect ect
    What you need to do is go here and follow steps for searching your system for purchased songs http://docs.info.apple.com/article.html?artnum=301749
    If you can't find it you need to go here, overlook the page and contact the music store where it says to http://www.apple.com/support/itunes/musicstore/lostmusic/

  • .Mac account and own domain

    Hi,
    I own a .Mac account where I have published my personal web site created in iWeb. Now, I'm creating a web site for an alumni club also in iWeb. The club has its own domain.
    Can I publish the web site for the club in its domain and still keeping my .Mac account and personal web site as it is? Two different domains, two sites and one computer!
    Thanks

    The easiest way to do this is to build your new site on a separate domain file, publish it to a folder and upload it to the server using FTP.
    Multiple websites on multiple domain files can be achieved by having them in separate folders or using a third party software like iWebsites.
    See ..
    http://iwebfaq.org/site/iWebMultiplewebsites.html
    Note that this page recommends the standard method for splitting domain files or the use of a third party application.
    As you are starting fresh I would recommend you start each new site from a copy of a blank domain file and save it in a separate folder. Splitting domain files should be avoided if possible as it can lead to file corruption in some cases and may cause problems in the future.
    See this topic and read the explanation by Cyclosaurus for more information....
    http://discussions.apple.com/thread.jspa?messageID=6453364&#6453364

Maybe you are looking for

  • Word attachments do not open in NWBC Desktop Client

    Hi all, We're experiencing a weird issue for two of our users with the desktop version of the netweaver business client. The system can open PDF documents directly, but when they try to open a word document, they get the file download popup where the

  • Change Translation Date: VBKD-KURRF_DAT or VBRK-KURRF_DAT

    Hello, Couldn't find any note regarding this subject. Senario: I canceled an invoice so i could change the payer in the sales order doc. the original invoice was with 31/01/2008 billing date. I've created new invoice (billing date 01/03/2008 and pric

  • Stupid Question - How do you flip an image or footage in Motion?

    I've been searching for the last 10mins but can't find any info on how to do this. I'd just like to flip an image horizontally - where is the flip command? Any help would be much appreciated. Cheers

  • WCCP on multilink interface for WAAS

    Hi, I have 2xE1 bundled into multilink interface, ip wccp 62 redirect in on multilink only, ip wccp 61 redirect in on fast0/0. While both serials works - everything is fine and WAAS works smoothly. (4.0.19(b14) ). Problem appeared when we had lot of

  • Pb d'affichage de vidéos

    Sur mon site, j'ai mis un certains nombres de vidéos. Je l'ai ai mis de la manière suivante : Insertion/Media/ActivX. Je n'ai jamais eu de pb jusqu'à présent pour visualiser et pour lire ces vidéos... V'là t'y pas qu'aujourd'hui, par hasard, je regar