Inbox not working

I have 10.4, but not Tiger. I have been using my Mail on my MacBook Pro successfully and without incident for some time. Then last Thursday, no new messages show up in my Inbox on my mac Mail. My mail is connecting to the server--both incoming and outgoing. I can see new messages on the server, but cannot access them. Can anyone help me with this? I'm at a loss. The mail is synced. I receive emails on my gmail and mobile device. The messages just do not appear in my inbox.

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Similar Messages

"Cancel and Keep Work Item in Inbox" Not working ??

Hi Experts,
We need your help in resolving a workflow issue. Issue is, When user gets an Invoice to approve (Non PO), she opens the invoice, do some changes, and park it. Then she gets Option button to either u201CApproveu201D, u201CRejectu201D, u201CCancel and Keep Work Item in Inboxu201D. When she clicks u201CCancel and keep work itemu2026u201D, ideally the work item should remain in her SAP Inbox, however it is getting executed and gone from her workflow. I found that work item in her SAP Outbox xecuted state.
Same thing happens when they try to forward the work item. She gets an option( a checkbox) to Keep a copy of the work item in her SAP Inbox as well, but that option is also not working and the work item gets transferred without leaving a copy into her SAP Inbox.
SAP System ECC 6.0
Please advice.
Thanks,
Sid

Hello,
Is this in SBWP or UWL? Does it only happen to one user? Does it only happen with one workflow?
Check in the workflow log if there is anything unusual.
regards
Rick Bakker
hanabi technology

Yahoo Mail Inbox Not Working

It seems that the Yahoo Mail Inbox has stopped fetching any messages (old or new). It will get all email from other Yahoo Mail folders... just not the inbox. I want to say it's been a problem for the last 2-3 days. The status message on the iPhone just says "Checking for Mail" and hangs.
Anyone else having this same problem?
Thanks.

For better or for worse, this solution below works, found at iLounge. I'd love to know what constitutes a "corrupt email" (that is fine by PC/browser but the iPhone can't handle).
==============================
07-14-2007, 05:52 PM #8
Carbonized
Freshman Lounger
Joined: Jul 2007
Posts: 3
I called an Apple tech and have a solution for the problem stated by the OP and myself:
1) Login your Yahoo account from your computer
2) Create a folder named InboxTest and move every email sitting in your Inbox into this new folder.
3) Compose a new email from Yahoo and send it to yourself (the Yahoo account that isn't working)
4) Close your browser, do not check/read your Yahoo account from your computer
5) Go to your iPhone > Mail > Yahoo > Inbox and tap the refresh button
5a) There is a possibility that the email you sent yourself got diverted to your Bulk/Junk folder automatically so if you don't see anything check that folder
5b) You may need to reset your iPhone (hold home + sleep button)
After you restart your iPhone, your InboxTest folder should show up, and your Inbox should be downloading new emails correctly. If your Inbox starts working again, do not open the InboxTest folder from your iPhone -- you will need to login from your computer again and go through the various emails in the InboxTest folder, one of them is corrupt or caused the issue to begin with... so delete any that you don't need
I hope this helps, it's the procedure as I could remember it when I was talking to the Apple tech... it may not be step by step but I think it will work -- if not just call Apple.
//B
Message was edited by: 19messages

Adding approver note in inbox not working

Hi experts,
We are on an SRM 5.0 classic scenario.
When a shopping cart enters the approval inbox (BBPSPWB_SIMPLE), the approver wants to add a note by clicking the button 'add note' . However, when clicking the button, the button just disappears so we can not enter a note. Can this be resolved by an OSS note?
Kind Regards,
Tom

hi,
as soon as the user (approver) clicks the button 'add note'.
then one text area should appear where it is possible for the approver to enter the note.
looks like the text area is not appearing in your system.
check wether you have configured the following setting in your system.
1) transaction --> spro
--> cross -application basic settings --> text schema --> define text schema
for text schema --> sc(shopping cart)
there should be an entry maintained in 'texts for schema'.
text id --> NOTM
with visibility set for the users....

IMAP Gmail Move from Trash to Inbox Not Working

When attempting to move an email message in the stock Mail app from IMAP Gmail Trash on an iPhone 5 with iOS 6.0.1 to the Inbox the message just dissapears and doesn't end up in the Inbox. Any ideas?

having this same issue. deleted an important message i got yesterday by accident, moved it from trash back to inbox...now it's gone from both and i can't find it anywhere.
tried moving another message from trash as well just make sure i wasn't crazy...

Customer Workflows Not Working from SRM Inbox

Hi everyone,
We are upgrdaing our EBP v3.5 system to SRM 5.0 (SRM SERVER 5.5 SP 5).
We are using integrated ITS and have many bespoke workflows which need to executeable in the SRM inbox via the integrated ITS and ultimately the portal (EP 7.0).
We have various issues with our bespoke workflows not working. The 2 errors we have found are:
1. When the users click on the workitem from the SRM inbox they sometimes see 'Service Cannot be Reached' error.
2. Other times they see the workitem details with no user decision buttons shown.
3. Other times the user decision buttons are shown but if the user clicks on one, they see a blank page with text "workitem currently locked by user WF_BATCH" at the top. This is an 'advance with dialog' task which works fine via SAPGUI.
Any ideas on any of the specific issues, or anything which we need to do generally to get custom workitems to be executeable via the ITS?
Thanks a lot,
Nick

Hi abhijit,
I checked that but I set it to blank in debug mode..but its still disappearing...the button disappears after pressing enter on error message.
actually the BADI when I implemented there is one method where I set E_ADD_ON_ACTIVE flag to 'X' to bring that button(recommended by SAP). that method is not getting called...

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Same problem here on my 4s: Control center music controls do not work.
Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

Inbox and POWL not working after installing SRM UI Add-On

Hi,
Currently our SRM system is on 7.02 SP06. Recently we have implemented the SRM UI Add-On component (Version 1.0 SP02). Immediet ly after installing the component SRMNXP, the inbox and POWL screens are not working from portal. Till now we haven't do any configuration as [per the cookbook after installing the SRMNXP component.
This issue is happening immediately after installing the SRMNXP component. The issue we get when we open the inbox is "Assert conditions was violated". Do we need to follow any pre-requesites immedietly after installing the SRMNXP component? Need the experts help.
Thanks,
Mahendran B.

Any clue?

I create cloud ID long time ago. My cloud ID is email. This email is not working now. I cant check inbox. How I can reset password in this case?

I create cloud ID long time ago. My cloud ID is email. This email is not working now. I cant check inbox. How I can reset password in this case?

https://appleid.apple.com

SAP Inbox mail not working

When I am sending mail from my SAP Inbox to other User SAP inbox, mail is not going into other user sap inbox.
Let say User A is send SAP inbox email to User B sap inbox, User B does not get email in his SAP Inbox even we selected Receipent type "SAP Logon Name". Instead mail is going to email address mentioned in SU01. I removed email address from SU01 even mail is not coming to SAP User Inbox.
I think this is defualt configuration sap has provided in all SAP system but some how it is not working.
anybody has any idea.
Thanks
Manish Patel

Dear Manish Patel!
Please check whether you have activated the mail system group in your system. In this case the received mails will go automatically to user's home mail address, defined in tr. SU01 for user.
To check the mail system group:
-Tr. SO16 >> Tab "Mail sy. grp." >> check the checkbox "Send to home Addresses of Users"
If this is set, please uncheck it (check the checkbox "No Mail System Group") and test the behaviour again.
Regards
Gergely

SAP Inbox t code sbwp is not working properly

Hi,
In our SAP server the SAP mail box t code SBWP is not working at a particular time between 11 AM to 12 AM. If we send internal mails between SAP users in t code SBWP we are able to receive all the time but at a particular time of 11 AM to 12 AM we are not able to receive any mail.
If we send any mail at that particular time after 11 AM we are receiving it only after 12 AM, but this error we are not facing expect that particular time.
I have checked whether any backgroung work process is Active at that time but all the BG work process are free at that time
please help me how to solve this issue.
Thanks
Senthil

hi
check out this sap note
1348288 Delayed delivery of documents in SBWP

E75 messaging application not working

Hi,
I have recently purchased an E75 and at first glance it looks to be very nice. However, now i have run into the problem that messaging is not working properly. The message indicator is telling me that I have 6 new messages. When I try to go menu>>messages the application tries to open but immediately crashes. Also when I try to open the messages directly by clicking on them from the message indicator the same behavior seems to happen.
Has anybody experienced the same? How do I get rid of these messages if I can't open them?
Any help is appreciated, thanks.
Porthos
Message Edited by porthos on 13-Oct-2009 02:54 PM

I've had similar problems with my E75.
I've found that Nokia Messaging simply gets confused & over-loaded, and gives up.
Try accessing you email account from your computer.
Then, delete all of your messages from your inbox & sent folders.
Basically, purge as much as possible.
Then try accessing it from your E75.
This usually works for me.
Message Edited by car2fast4you on 02-Nov-2009 05:33 PM

Application for receiving application not working..

Hi..experts.
i m new to j2me programming. plese help me.
I got an application for receiving SMS from net. i nstalled it on nokia N73. but it's not working.
this is the code of that app...
package receivedemo.sms;
import javax.microedition.lcdui.*;
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import java.io.*;
public final class ReceiveMidlet extends MIDlet
//The data we expect to receive.
private static final String TEST_DATA = "This is just a test";
public ReceiveMidlet()
//Signals the MIDlet that it has entered the Active state.
public void startApp()
//Get the display object for this MIDlet.
Display d = Display.getDisplay(this);
//Create and start a new WorkerThread.
Thread t = new WorkerThread();
t.start();
//Create a new Alert.
Alert alert = new Alert("Starting DynamicPushRegisry");
//Display the alert for 2 seconds.
alert.setTimeout(2000);
d.setCurrent(alert);
private class WorkerThread extends Thread
public void run()
//Get all connections registered with the PushRegistry
//for the current MIDlet suite.
String[] connections = PushRegistry.listConnections(true);
if ( connections.length == 0 )
//Nothing is registered, register a connection.
try
//Dynamically register a socket connection
//on port 50000.
PushRegistry.registerConnection("socket://:50000",
"receivedemo.sms.ReceiveMidlet","*");
} catch (ConnectionNotFoundException e)
message(e.toString());
} catch (ClassNotFoundException e)
message(e.toString());
} catch (IOException e)
message(e.toString());
else
//A connection is already registered and data is arriving.
//Fetch the incoming data.
fetchData(connections[0]);
//Shut down to wait for data.
message("Done");
System.out.println("correct till here");
notifyDestroyed();
//Fetches the incoming data.
private void fetchData(String connection)
try
//Open the connection.
Connection c = Connector.open(connection);
if ( c instanceof StreamConnectionNotifier )
//Open an InputStream.
StreamConnectionNotifier scn = (StreamConnectionNotifier)c;
StreamConnection sc = scn.acceptAndOpen();
InputStream input = sc.openInputStream();
//Extract the data from the InputStream.
StringBuffer sb = new StringBuffer();
byte[] data = new byte[256];
int chunk = 0;
while ( -1 != (chunk = input.read(data)) )
sb.append(new String(data, 0, chunk));
//Close the InputStream and StreamConnection.
input.close();
sc.close();
String s = sb.toString();
//Test the data for validity.
//If invalid an exception is thrown.
Assert.assertTrue(TEST_DATA.equals(s),
"Failed to receive proper string: " + s);
//Display the received data.
message("Received: " + sb.toString());
} catch (IOException e)
message(e.toString());
//Display a String message to the user.
private void message(String msg)
//Create a new Alert with the message.
Alert alert = new Alert(msg);
//Display the alert for 5 seconds.
alert.setTimeout(5000);
Display.getDisplay(this).setCurrent(alert);
//Signals the MIDlet to stop and enter the Pause state.
public void pauseApp()
//Signals the MIDlet to terminate and enter the Destroyed state.
//Unconditional when set to true. The MIDlet must cleanup and release
//all resources. Otherwise, the MIDlet may throw a
//MIDletStateChangeException to indicate it does not want to be
//destroyed at this time.
public void destroyApp(boolean unconditional)
//Throws an IllegalStateException with the supplied error message.
final class Assert
private Assert()
static public void assertTrue(boolean exp, String failmsg)
if (!exp)
throw new IllegalStateException(failmsg);
plzz help me...it's important for me. Thanks a lot

when i send a SMS there is no reaction from application.
i don't know how is this failing.
i am very troubling about this.
i have to receive the SMS that comes to the inbox.
if you have any working source code please give me.
Thank you so much.
Edited by: RavindraDiwakar on Sep 14, 2008 8:17 PM

Mail Signatures, Folder Organization, Notification and Attachments not working the same since upgrade to Mavericks

Hi All,
Normally very quick to do so, I’ve been hesitant to upgrade to Mavericks based on so many issues being reported with Mail + Gmail.
Previously Apple released a fix for these issues and I still waited a while. This weekend I upgraded to Mavericks and Mail is definitely not working as I’d expect it.
Some of the things I notice include:
1) My saved mail folders, previously in alphabetical order, are now in reverse alphabetical order and dragging them to be in a different order has no effect
2) Previously when I clicked on a message and pressed Message > Remove Attachments the message would reappear in my inbox within a second or two, without the attachment. Now, the message simply disappears.
3) The little red icon no longer appears in the dock when a new message arrives
4) For my various accounts, signatures do not appear/disappear as I select a different From account (each of my accounts has different signatures).
Does anyone have thoughts on any of these items?
Thanks,

Not an answer, but a repeat ...
I too have problem (2) -- Remove Attachment now makes the email in question disappear (in fact moving it to Archive).
Help would be appreciated.
(Have just moved from Lion to Mavericks.)

Exchange email will not work after IOS 5.1 update. Anyone else having same problem. Its been three days now I cannot get mail.

Exchange Email not working on Iphone 4S is anyone else having the same problem and is there a fix for this?

@ w3nitro
I'm having the same issues, except only one of my Exchange accounts took a dive after upgrading to iOS 5.1. My Gmail account (set up as Exchange) works flawlessly but my native Exchange account (work e-mail) stopped working after the update.
Post update to 5.1: (work Exchange account) I could view my inbox and view individuals emails in the inbox, but I was unable to send any emails. Mail started asking for my password after the update (for the affected Exchange account) but once entered, it failed to verify.
I completley removed the Exchange account and rentered all the account settings but again, failure to verify any information. I was hoping my password might have changed but it did not. Also, maybe the IT guy at the office (not very bright) changed some settings but the only difference is the new iOS update.
And while playing with the iPhone trying to make it work again, I noticed something really weird. Old emails (2-3 weeks) from multiple email accounts to include the inop Exchange account started showing up again on the pull down notification menu. I would clear these out of the notificaion menu but they always kept reapearing; very strange.

Inbox not working

Similar Messages

Maybe you are looking for