INBUILT BLUETOOTH PROBLEM FOR 3250 HELP NEEDED

HI I HAVE BROUGHT THIS MODEL NOKIA 3250 2 MONTHS BACK BUT NOW ALL OF A SUDDEN THE BLUEOOTH IS NOT WORKING I HAVE UPDATED THE PC SUIT SOFTWARE ALSO THE NEW VERSION BUT MY PHONE SAYS UNABLE TO PERFORM BLUETOOTH OPERATION CAN NAY ONE PROVIDE ME A SOLUTION FOR THIS

Hello Jason, Thanks for your reply, when I click the speaker test thing on my RealTek Panel (http://img523.imageshack.us/img523/9499/oliver2007aug2800sr9.jpg) the rear speakers work fine, it's just whenever I'm listening to music or playing a game the audio doesn't come out the rear two speakers. Thanks!
Oli'ver

Similar Messages

Sound & Bluetooth problems for lenovo G 560

    Sound & Bluetooth problems for lenovo G 560-
Speakers create noise when increase the sound or change window.
Bluetooth icon & drivers dissappear after sometime.(Fn + F5 doesn't work)
They appear again after restart.
Warranty Status Lookup
Product ID:       Type-Model:       Serial number:
59304299       0679-N/A       CBxxxxxxxx
Location:       Expiration date:
India          2012-08-31
Moderator Note; s/n edited for member's own protection

Hi lenovoG60,
Welcome to Lenovo Community!
You may want to try updating all of your machine drivers such as
Lenovo Energy Management (power management)
Bluetooth drivers
Sound card drivers
Chipset drivers
Look for the drivers from our support site.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Portal crashes and intermittant problems..urgent help needed.

Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.system_administration/com.sap.portal.system_admin_ws/com.sap.portal.themes/com.sap.portal.theme_editor/com.sap.portal.styleeditor
Component Name : null
Page could not create the iView.
I briefly describe the system setup.
sptltrex = central instance
sptl1 = app1
sptl2 = app2
sptldb = database instance.
sptltrex built with virtual name ourworld-0
sptldb built with virtual name ourworld-db
System setup with Oracle dataguard feature, so ourworld-0 and ourworld-db can fail over to disaster recovery systems sptldr and sptldevdb at another site. Although we installed using the SAPINST_USE_HOSTNAME for SCS/central instance the visual administrator and message server still pick
up sptltrex. We though setting the SAPLOCALHOSTFULL to ourworld-0.sap.serco.com had fixed this issue, but this generated many iview errors that
could not be found. When the SAPLOCALHOSTFULL was backed out everything
began to display again. Although there is still intermittant errors of screens not acting as required.
message server output
http://sptltrex:8100/msgserver/text/logon
version 1.0
J2EE1666800
J2EE sptl2.sap.serco.com 50000 LB=2
J2EES sptl2.sap.serco.com 50001 LB=2
P4 sptl2.sap.serco.com 50004 LB=2
P4S sptl2.sap.serco.com 50006 LB=2
J2EE13975600
J2EE sptltrex.sap.serco.com 50100 LB=2
J2EES sptltrex.sap.serco.com 50101 LB=2
P4 sptltrex.sap.serco.com 50104 LB=2
P4S sptltrex.sap.serco.com 50106 LB=2
P4HTTP sptltrex.sap.serco.com 50105 LB=2
JC_ourworld-0_PP1_01
SDM ourworld-0 50118
We have had numerous OSS messages for various continuing problems on the system. Today we have an complete up-to-date as possible patched system. SPS 9 with all the latest sub patches also. We have installed AIX TL 05 with service pack 2 so oslevel -s shows 5300-05-02 + a related db APAR, the IBM java JDK is SRS06. Full earlywatch go-live check parameters and options have been completed.
But still we have problems.
can anybody help......it's urgent....
thanks
saurabh

hi!!
We have a 3-server portal installation with one j2ee dispatcher and two
j2ee servers on each server.
We are experiencing major issues with the consistency or
synchronisation between the servers and availability of portal applications.
For example the themes editor is only available on sptl1 server0, so if
you are lucky and log onto that server you can use this application.
THIS IS ONE OF MANY examples of this type of issue. How can we ensure
that the landscape is consistent? Screen shots from sptl1 showing the
themes application being available and not available.
A simple look at the filesystem reveals the following, and only the
themes editor directory and contents are on sptl1.
JSPM deployment finished successfully.
sptl1:root:/ > find / -name "com.sap.portal.themes.editor" -print
/usr/sap/PP1/J00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.themes.editor
/usr/sap/PP1/J00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/portalapps/com.sap.portal.themes.editor
sptl1:root:/ > ssh sptl2 find / -name "com.sap.portal.themes.editor" -
print
sptl1:root:/ > ssh sptltrex find / -
name "com.sap.portal.themes.editor" -pri>
thanks
saurabh

Virus or not in Retina Mac??? Big problem for me help!!!

Sometime ago (forgot when), my Mac will suddenly use up all the storage spaces and RAM. I have to restart the computer then the used strorage will restore. Glad that this doesn't always happen, but still occasionally. Anyone knows what's the problem?
Please help me ^^

Here's a link to the Mac Walware Guide for you to review if you belive think you might have a virus, but it doesn't sound like you really have one.
http://www.reedcorner.net/mmg/
I would also recommend trying the free "Memory Clean" app in the App Store to quickly free up memory on your mac. I use it daily and it's pretty good.
Good luck!

Broken firewire ports - boot problems - target mode help needed

HI there,
I have a 15" macbook pro from 2008 with core 2 duo cpu etc.
It has recently developed the problem of hanging during the boot process with a blue screen, taking around 5 minutes to get to the login screen.
Much research has led me to the solution of removing two files from the SYSTEM > LIBRARY > EXTENSIONS folder relating to the firewire bus (?) and this has solved the issues about booting. (IOFirewireIP.kext and IOFirewireFamily.kext)
(I put on a clean install of 10.6.3 and the screen stayed blue. Removing these two files in target mode fixed this problem.)
There is still a sleep problem though - i.e. the machine does not wake from manual sleep (Apple menu) or if the system sleeps after the time allocated in the energy saving preferences.
There are so many suggestions on the web, it's almost impossible to know what the correct course of action is.
Another strange thing is, is that I can boot into target mode and access the drive via the firewire (400) port from another mac.
If the port were truly broken, how come it still works in target mode?
Is it possible that the firewire interface is not broken, but disabling these two files above could eliminate another associated problem?
Also, is there an online resource, or walkthrough, to eliminate what could be causing the sleep problems?
I would appreciate someone's suggestions on this and thank you for your help in advance!
Best wishes,
Torbz

Strangely, after installing a clean 10.6.3 - I've updated to 10.6.8 and the firewire ports are suddenly back and being reported in system profiler (whereby they were not before).
The two files I deleted above have been re-instated through the updates - and all seems well.
I've yet to check the sleep mode problem - but the firewire has at least sorted itself out...
That's a bonus!
Torbz

Applescript for QuickTime help needed.

I have some mkv files that I would like to re-encapsulate as mov files.
Through the GUI I would normally open the mkv in quicktime, then Save or Save As with self-contained option selected, and just hit enter. This would save the re-encapsulate the movie with no re-encoding to the same directory with the same filename, but now with the .mov extension. This works with no issues.
Now, I want to be able to automate this process, but the only thing I can't figure out is how to tell the movie to *save self contained* with the *+same name in the same directory+*.
Thanks in advance for any help you can offer!

I don't know what the rest of your script is, but the following snippet will save the front document - no error checking (such as existing files or loaded state of the document) is done:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #DAFFB6;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
tell application "QuickTime Player 7" to tell document 1
set thePath to it's path & ".mov" -- just add a new extension to the existing file path
save self contained it in thePath
-- close
end tell
</pre>

Blackberry Storm Problems...Help Needed ASAP

Soooo...for some strange reason i bought a BB Storm : / when i got it (yesterday), i charged it and it charged up fine. but the battery ran down rather quickly. So i am now tryin 2 charge it up again and it is not giving one bit of charge. i just left it for 3 hours and came back to check it and it went dead...i did a battery pull twice and still nothing. what is my next move???

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Want to use Logic 8 Pro for Podcasting, help needed

I have a few problems. I just switched over to Logic after using ProTools for 4 years so I'm a newbie. I'm about to start a podcast soon and I want to use Logic 8 Pro to do so. Is there a book that someone can recommend me for getting familiar with Logic?
Here are the things I need to get done:
I have a mixer and I need to know how to record the sounds playing through my computer to end up in Logic. I basically want to be able to capture the audio playing on my computer and have that be on the podcast. How do I do this?
Secondly, I'm confused about what Input 1 and Input 2 are. What is the difference?
I'd appreciate anyone who could IM me to help me further with Logic if I have a quick question or anything. My AIM screen name is DirtyVibes. Any help would be appreciated.
Thank you,
-RandomSkater

Is there a book that someone can recommend me for getting familiar with Logic?
Yes, the Getting Started manual, you can download it from Apple.
I have a mixer and I need to know how to record the sounds playing through my
computer to end up in Logic. I basically want to be able to capture the audio
playing on my computer and have that be on the podcast. How do I do this?
I'm not sure what you are asking here. If you want to record the whole output of your computer, I recommend using a virtual audio driver like Soundflower or Jack.
Secondly, I'm confused about what Input 1 and Input 2 are. What is the difference?
Input 1 is the input marked "1" on your audio interface (or the left channel on a stereo pair).
Input 2 is the input marked "2".
If your audio interface has more than 2 inputs, they will all show up, so you can record different inputs to different tracks if required.
You might be better off using Garageband to record your podcasts, it's simpler and has dedicated podcast functions (like adding iTunes artwork and so on).

16:9 Problem...Help needed....

Hi,
I am using FCE 3.5 on my intel iMac to produce movies. I use a combination of pictures created on photoshop and random videos in my movies. I need my final output (which is on dvd) to play on a 16:9 plasma screen.
Up to now, I have been creating my photoshop pictures in .tiff formats in 1920x1080 resolutions so that they will appear full screen on the plasma. My sequence setting in FCE is "DV NTSC 48kHz anamorphic"
I would then use the "export to quicktime" function, and drop the reference file into idvd 6.0.2 to create the dvd. No problems until recently.
In the past 2 weeks, whenever I create a dvd in idvd, my movie gets squashed into 4:3 format. This happens on the dvd preview in idvd, and the completed dvd played in a dvd player.
Can anyone help? Thanks..:)
iMac Intel Core Duo Mac OS X (10.4.7)

Sorry!! to be quite out of the topic but I'm wandering if u guys might help;I'm using a Powerbook G4 1200mhz 256ram The problem is that It seems I have deleted the partition somehow..coz now instead of one H/drvs I now have two & what seems to be the most of it is that In cannot install the operating system coz it does not realy recognise the H/drives it gives the network boot or cd-r boot, Im thinking that somehow it needs to be formatted or maybe get the right partition because I can see there's quute a few of them...I'd really appreciate if maybe u might help me (DESPERATE) for assistance PLZ..PLZ..Nkosana (South Africa e-mail> [email protected]

Purchase problems-ish..HELP NEEDED.

I purchased things last week but it turned out it didn't go through. When I checked my Apple ID it says for part of my billing information I have to put in an "issue number" but I don't have one. I'm with Clydesdale Bank, can anyone PLEASE help me??
ALSO, because of this i have an outstanding balance that I need to pay - hence the importance.
Message was edited by: missuseless

Hello,
You will need to run both ME80N and FBL1N. ME80FN can display PO history and from FBL1N you can get payment history.
Hope this helps !
Cheers !

Chess: Java Swing problem!! Help need

Hi, I have just learn java swing and now creating a chess game. I have sucessfully create a board and able to display chess pieces on the board. By using JLayeredPane, I am able to use drag and drop for the piece. However, there is a problem which is that I can drop the chess piece off the board and the piece would disappear. I have try to solve this problem by trying to find the location that the chess piece is on, store it somewhere and check if the chess piece have been drop off bound. However, I could not manage to solve it. Also, I am very confuse with all these layer thing.
Any suggestion would be very helpful. Thanks in advance

I wonder if you are biting off a little more than you can chew. This seems like a big project for a beginning coder. Anyway, my suggestions can only be general since we only have general information:
1) Break the big problem down into little pieces. Get the pieces working, then put them together.
2) Make sure your program logic is separate from your GUI.
3) If still having problems, post an SSCCE. See this link to tell you how:
http://homepage1.nifty.com/algafield/sscce.html
4) And as camikr would say (and flounder just said): next time, post this in the Swing forum.
Good luck!

Flash and publishing for iOS (Help Needed)

I currently own Adobe Create Suite 3 Design Premium. I just recently heard that CS 5.5 can develop iOS Apps. So I downloaded trial 2 days ago and thought I would see if I could develop some apps and if things go well upgrade.
Here is the issue I'm running into. I created the CSR file with openssl since I don't own a mac, only a windows 7 based pc. Apples developers program accepted my CSR and created the provisioning file for it.
However, when I go to publish the for iOS it asks for a .p12 file. I found online that is my CSR file. However, it asks for a password. I have no password for it. It does not allow leaving the password field blank, and anything I put in it is incorrect.
All I need help with is the .p12 file and getting past the password and I will be good to go.
Anyone know a step by step guide or could walk me though this part. Thank you and I greatly appreciate it.
~Chris

the only thing is that i havent got a password set to my computer but i will have a look in to that thanks for the help

Waiting For Activation, help needed.

Hi, I have bought a iPhone 3G 8GB from ebay. I have checked the IMEI number on "checkmend" and there are no reported problems. It is apparently on o2 but I want to unlock it for use on Vodafone. I have bought a o2 pay as you go sim card so that I can get it unlocked properly but when I insert it I get the message "Waiting for activation, this may take a while" but it never goes until I press "dismiss" then it just says "No Service".
Under the carrier menu the only provider listed is Orange but under the "phone" menu in settings the last box does say o2!
Can anyone help? I've tried googling, restoring the iphone, uninstalling and re-installing itunes. Does anyone know what the problem could be or better still anyone know of a solution?

No way to tell really - I am always suspicious about 'the worlds largest,best, greatest ' etc checkers of anything. The four/five UK carriers all operate an IMEI block agreement between them and somehow I doubt that they would give up that information to a small company operating out of a Coach House in Gloucester
That said, who knows - its practically impossible to tell where a phone came from - you are not the first to ask by far! The others didnt manage to find out either. Sorry I cannot be more helpful - the only online checker that Apple have is a warranty checker but that won;t even tell you the country - just how much warranty left on it. https://selfsolve.apple.com/GetWarranty.do

NetStream problem for FLV HELP!!!

Hi everyone,
I'm building a client server appliction using flash: the
client app is a projector that connects to a server and loads some
sfw files from that server. One of these files is used to play
videos...
When I test this file locally it works: I run it on my
computer and it fetches the videos on the server.
The problem occurs when I load it through the projector; the
projector is run from my computer, it then loads the mentionned swf
from the server which in turn loads the videos from the server. So
the swf and the videos both come from the server...
I did a little debugging and I think it has something to do
with the netconnection not being setup properly:
this.m_oConnection_nc.connect(null);
seems to be at fault and I'm wondering if I should put the
domain name as an argument...
Basically the _videoStatus function never gets callled so i
assume the NetStream object is not instaciated...
This is the class used by the swf that plays the video:

Yeah about that... the security issue is a bit obscur to me
so I do need to read all those.... but one thing that has me
confused is if I load the swf residing on my server that plays flv
from the same server, in a projector that is onmy computer (still
following?) do I give a relative path for the flv or an absolute (
http://....)? Also how should I set the
security policy for my flv local or network?

Esprimo U9200 - Battery status problems - Fix Found, Help needed!

After months with this bug, and unsuccessfully searching for a solution, it seems like I found one in the edubuntu wiki.
But I need help, seems this solution is based on the ubuntu distro tools, and since Im not such an advanced user of (Arch) Linux, therefore I don't know how to adapt this solution to Archlinux.
From the related entry in the edubuntu wiki: https://wiki.edubuntu.org/LaptopTesting … primoU9200
Battery: the BIOS DSDT has a bug, which causes to incorrectly show the Charged and Discharging states. The fix is easy. First we'll get the DSDT table and dissasemble it:
sudo apt-get install iasl
cd
mkdir DSDT
cd DSDT
sudo cat /proc/acpi/dsdt > dsdt.dat
iasl -d dsdt.dat
gedit dsdt.aml
Ok, now you should have your dsdt file open. So let's fix it, look for the following code in Device (BAT0), under the Method (UPBS, 0, NotSerialized) subsection:
If (LEqual (Local0, 0x02))
And (Local7, One, Local0)
If (LEqual (Local0, One))
And (Local7, 0x80, Local1)
If (LEqual (Local1, 0x80))
Or (Local4, 0x02, Local4)
Else
Or (Local4, One, Local4)
Ok, now let's fix it. Else code is misplaced, it has to be moved out of the If (LEqual (Local0, One)). So, it should be:
If (LEqual (Local0, 0x02))
And (Local7, One, Local0)
If (LEqual (Local0, One))
And (Local7, 0x80, Local1)
If (LEqual (Local1, 0x80))
Or (Local4, 0x02, Local4)
//ELSE WAS HERE
// ELSE CORRECT PLACE
Else
Or (Local4, One, Local4)
Now, simply save and close gedit, and let's continue:
cd
cd DSDT
iasl -tc dsdt.dsl
sudo cp dsdt.aml /etc/initramfs-tools/DSDT.aml
sudo update-initramfs -u -k all
So, that's it. What we've done is recompile the DSDT including the fix, moving it into the initramfs and then recompiled the initramfs so that the custom DSDT gets loaded. After rebooting the battery status should be always ok.
I managed to install iaml, disassemble the DSDT from /sys/firmware/acpi/tables/DSDT (and not the pathe the wiki says) and do the changes the wiki says, and recompile it, but Im not really sure of what to do after that.
The commands to make the initramfs and the configuration files I probably need to modify to include my patch are different. Any help on those? I marked the lines I need help with as bold. Thanks.
Last edited by Dj_kourampies (2011-03-30 05:10:30)

I found how to do it with initramfs, but I also discovered that custom DSDTs through initramfs are no longer supported since kernel 2.6.30.
So I had to recompile the kernel, including the custom DSDT in the kernel build. Sadly Im not so good with ABS so I just modded the original kernel26 package. IIt works perfectly. hope that sometime soon I ll manage to make a PKGBUILD for a kernel26-u9200 package.

INBUILT BLUETOOTH PROBLEM FOR 3250 HELP NEEDED

Similar Messages

Maybe you are looking for