Incase of emergency contacts

Hello and good morning , I am a new Iphone user , been on the Android platform for many years and i see something that appears to be lacking on the Iphone , my last two droids had an I.C.E. contact list , In case of emergency contacts , if something happened to me and the ems crew saw my phone they could check to see who to call in case something happened , so is it something maybe hidden that i dont see or is it just not installed on the phone and if its not does anyone else think this would be a good feature ? ,,thanks and have a good day ...Tim

You can put any contacts you want in the Contacts app and call them "I.C.E.".
Another trick would be to put all the contacts you'd like called in a note in the Notes app, take a screen shot of that note by tapping the Home and power buttons simultaneously and then using that picture as your lockscreen wallpaper. This would make the information available even if the phone was locked with a passcode.
If you want to make suggestions to Apple, use the Feedback page:
http://www.apple.com/feedback
Best of luck.

Similar Messages

  • Error while modifying the data in Emergency Contact.

    Hi All,
    I have developed a new application for emergency contact by following the FPM.Its a Zcopy of standard US/family application. The application is working fine except modify details.If i am trying to modify the previous records i am getting an error  Start date should not be earlier than todays date We are using Usecase B3
    Can any one help me on this.
    Thanks
    Ravi Sunkara

    Hi,
    Check have you implement ny BADI..............
    Any logic you have written in FPM for thiss.......

  • Emergency contact iview in BP MSS 1.41

    Hello,
    We have a Portal landscape which is NW 7.0 with EHP1 (SP 5) with Oracle 10.2.0.4 running on AIX 6.1.
    Now our EP Dev team is looking for Emergency contact iview and not able to find the same.
    As a result of that we did some search and found that Emergency contact iview is not included in MSS 1.0, also SAP asks to go back to MSS 60.1.22 to get the iview.
    Now my question is if we install the old MSS BP 60.1.22 will it cause any problem for the customisations created using MSS 1.41, can we use two different BP MSS in same system.
    Please throw some light on this issue.
    Thanks in advance.
    Regards,
    Yoganand.V

    Hello Siddharth,
    Thanks for your thoughts.
    In our case we have a single backend system connected to EP which is running on ECC 6.0 EHP4 EHP Stack 04.
    Our SAP_APPL release is 604 and SP 04, so our BP MSS combination is BP_ERP5MSS  1.41 SP4 which is correct as per SAP.
    Please let us know what could be done now in order to get the missing Emergency contact iview.
    Thanks in advance.
    Regards,
    Yoganand.V
    Edited by: Yoganand Vedagiri on Oct 8, 2010 9:57 AM

  • ESSMSS Scenario General Information - Emergency contact details

    Hello All,
    We have a scenario where in SAP ESS\MSS Portal , In MSS Tab --> Team --> General Information Page (Personal Data iView) , I am unable to view Emergency contact details Fields.
    Even using iView Personalizations options I am unable to view the respective Information details .
    On the bacckend I can see the details being avalable for the employee.
    Requesting to some suggesstions and thoughts here on urgency.
    Regards,
    Ronniee.

    Hello All,
    Adding to the scenario above. On one landscape we see in MSS --> Team --> General Information.
    On
    Emergency Contact details.
    NA Number
    Working Time :                                                      Next Week
    whereas in working time we need the days of the week along with the working hrs.
    Can anyone tell us if anything needs to be activated for the same. Or is it just a custome thing that we need to add on the respective standard object?
    Regards,
    Ronniee.

  • Emergency Contacts in Oracle HRMS

    Hi,
    We are in process of extracting data from Oracle HRMS and send it to ADP.
    We have to pull Emergency contacts details for a person.
    I can see the table per_contact_relationships, which stores the person_id, contact_person_id, contact_type.
    But where do I see the relationship for that person?
    Suppose if I have person_id as 123, and contact_person_id as 789, and contact_type = 'EMRG',
    I want the relationship between these two persons, like Spouse, Child, Daughter etc.
    Which table stores these relationships?
    Please clarify...
    Thank you,
    Edited by: user7995362 on May 29, 2011 10:20 PM

    Hi
    CONTACT_TYPE column of table per_contact_relationships stores the Relationship between employee and contact.In your example 'EMRG' is Relationship between employee and contact.
    If you query for Spouse then you will see the contact type='S' for spouse.
    HTH
    Gaurav

  • Year End-Notes Emergency Contacts

    We have applied all the 2011 year-end notes and have discovered an error  It looks like anyone listed as an emergency contact on the family member dependent Infotype 0021 now appears as an emergency contact on the Health Insurance infotype 167 with a red error. Any suggestions or notes pertaining to this error?
    Thanks,
    Kawana

    What Country's Year-End Note(s) are you referring to ?
    On what version are you on ?
    I don't know for other Countries, but the Canadian Year-End Note will not be available until December 1st.
    We are currently in the process to apply the Baseline Support Packs (SAPKE60062 to SAPKE60074)  to be ready for the Year-End Note.

  • Emergency contacts in an Organization

    Is it possible to maintain emergency contacts for an Organization? This is very different from what is maintained in the infotype 0021 (Family Member/Dependents) and sub type 7 (Emergency contact), which are maintained for an employee.
    What I am looking for is to maintain emergency contacts at organization level, whom the employees can contact, in case of a fire accident or any other emergency in the workplace.

    Hi ,
    u can try this solution/suggestion...
    u can create a Z relationship and map the relation ship with employee (whom is resposible for the fire and other emergency activities) and orgunit.in the dhoc query or zreport you can get those contact numbers iof the employees to orgunits...
    if the emergency contact person is not a employee of the company(contract) --data not maintained system..then it will be problem..
    my question for you where do you wanna display these emercy contact information...
    if you want to display this portal..
    then try for the adhoc query to retrieve the employee info..and create a transaction for the adhoc query with a variant.
    then create a iview for the tcode....and map the iview to the ess role

  • Infotype for  Employeeu2019s Work cell and Emergency contact phone?

    Hi All,
    I am currently working on HR ABAP.
    I   want to know the following fields information.
    Employeeu2019s Work cell and Emergency contact phone.
    in sap from where, we can get the Employeeu2019s Work cell  and Emergency contact phone??  In which infotype   , field and subtype?
    What about Emergency contact phone? Note that for Emergency contacts, there can be multiple records with current validity. You need to determine if you should show all of them, or only one. There is no way to know which one is the u201Cprimaryu201D contact.
    Regards,
    Kishan

    Kishan,
    This is not a ABAP related question. To give you some hint check IT 0006
    Thanks
    Bala Duvvuri

  • Restoring iPhone 4S' backup failed to restore emergency contacts?

    Hello.
    Is it me or does restoring iTunes v12.1.1's iPhone 4S (iOS v8.2)'s back up (before upgrading iOS v8.1.2 to v8.2) does not restore Emergency Contacts I stored in a very old, updated Windows XP Pro SP3 machine? I had to re-enter these datas into iPhone 4S.
    Thank you in advance.

    Hi Jeff,
    It sounds like you want to unlock your iPhone and tried to restore it but ran into an issue with that process. If your carrier gave you a new SIM, you can unlock the iPhone without restoring it as shown in the first article below. If you do not have another SIM or just want to resolve the restore issue, try the suggestions in the second article.
    iPhone: About unlocking
    http://support.apple.com/kb/HT5014
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    I hope this helps.
    -Jason

  • How to add a secondary emergency contact in ESS My View

    Hi,
    We received a request from our Business to add a secondary emergency contact in the ESS under My View -> My Personal information -> Emergency contact. I know that SAP provides subtype 7 for infotype 0021 to store the Emergency contact information and the service PZ18 for adding the same in ESS Portal Iview. But this allows us to store only once emergency contact information. Changing time constraint in order to add multiple emergency contacts is not a soultion because the client did not agree for that. We are planning to create a new subtype (90) for the infotype 0021 in R/3 to store the secondary emergency contact info. But how do I link that subtype to the ESS IView? The standard IView is only picking up subtype 7 and not the custom one (90). Do we need to create a custom IView for this? Or do we need to modify any BAPI/BADI for this? Any idea/suggestion is highly appreciated.
    Thanks,
    Best Regards,
    Mausumi Ray

    >>Also, in that case they won't be able to differentiate beween primary and secondary emergency contacts..
    1. You can enahnce the infotype in PM01.. ie add a custom field that can be maintained as '1' for Primary & '2' for secondary..
    Youcan restrict the users from going beyond 2 via the Infotype user exit ZXPADU02 or BAdI HRPAD00INFTY..
    >>For the ESS part.. I don;t think you need to touch the ITS.. at least not if you are on 47.. You can copy the service PZ18 into a custom version & modify the HTML templates as needed.. You will also have to copy the function group associated with PZ18 & make changes to the underlying function modules to read & store the new field..
    ~Suresh

  • Validations in isConsistent() for Emergency Contact

    Hi,
    I am working on Emergency contact screen. I added some validations for telephone number field.
    Problem :: Duplicate records are created in backend, when there is a user error in  telephone number field
    I think when user clicks Save, onFlush() method is flushing both erred record and good record.
    Please suggest any advise to avoid this duplicates.
    Thanks,
    Dileep

    Thanks Sridhar,
    I am doing custom WDJ validation for telephone field in isConsistent() method. When I check for length and return false for invalid length, it works as expected and gives error. But after I correct the error and submit, it creates two records in infotype 21- one record with error values and one record with corrected values.
    Please advise,
    thanks, Dileep

  • Emergency Contact Report (MSS)

    Hi,
    I have copied and modified the SAP query Family members. I have added the infotype 106 to get telephone number of all emergency contacts of given personnel number.
    The problem is the query returns duplicate records if given personnel number has more than one emergency contact as if it is returning the cross product of infotype 0021 and infotype 106.
    Is here is way to fix this by picking only the corresponding telephone number from infotype 106 for the emergency contact in 0021.
    The purpose is that managers should be able to see their emergency contacts of personnel reporting to them in MSS.
    We are using version SAP ECC 6.0 and EP 6.0 with Business package ERP 1.0 (for MSS).

    This is a common problem, you will definitely get duplicate records and apparently there is no solution but ABAP. You have to create custom fields and put ABAP code behind them instead of code at record processing level. I have encountered same problem a year back and ended up coding in the infoset after a lot of research. You can refer to my blog to write custom fields: /people/shafiq.rehman3/blog/2008/06/16/sap-adhoc-query-sq01-sq02-sq03

  • Health app can't add emergency contact

    I Have an iPhone 6 plus iOS 8.2. I can't add my emergency contact in the medical ID section of the health app. I click on "add emergency contact" and it sends me to my contacts. After clicking on the name it either throws me out of the app or nothing happens. Is

    seems i should've tried 'RESET' prior to asking my question...!

  • I wish to print an address label using 4 columns that contain: 1st name, last name, emergency contact, & emergency phone number. I have a MacBookPro, Microsoft Excel,  & Cannon MG29000 printer.

    How do I print an address label, & what size paper etc.?
    Message was edited by: Johanne Christmas

    How do I print an address label, & what size paper etc.?
    Message was edited by: Johanne Christmas

  • How can some emergency contact rings even if phone is in silent mode

    H

    If I understand correctly, you're asking if you can have one number ring aloud even if the phone is on silent? Sorry, but that's not an option.

Maybe you are looking for

  • Blob as pdf in on-demand-proces not working

    What am I missing ? We have a multi-record sql-report (classic) with key's. When an user clicks on a row a javascript function is executed. The function executes an on-demand proces en transfers the key of that row to the proces var get = new htmldb_

  • Data is randomly consolidating at a pcon of -100

    Starting in April, there are a handful of random transactions that are consolidating at a pcon of -100. I have been able to pin point each of the transactions down to an exact pov. I checked the owenership management of each entity and the pcon and p

  • Updating TCURR with flat files?

    Hi SAP Community, I got some questions regarding the TCURR table where the exchange rates for various currencies are stored: 1) Can I update this table by using flat files, e.g. exchange rates coming in as CSV file? 2) If this is possible, how do I u

  • Project Variable limitation in Oracle 11G BPM

    hi, Is there any limitation with Oracle 11G BPM on the number of project variable that can be created for a given BPMN processs ?? example , instance is not getting created if the number of int Project variable is more than 10. If there are 10 INT pr

  • Backups work fine, but nothing shows when entering TM

    Hi there. I recently changed to backing up to a network attached drive through AirPort Extreme for my two Macs. It all seems to work fine. The problem is that when I enter TM on my iMac, the incremental backups don't show, but they do seem to regular