INCI codes and CAS-numbers in EH&S
Hello,
This is probably very basic question.
I'd like to know how to implement the following requirement:
I have a material XXX, three INCI codes A, B, and C. In addition, there are three CAS-numbers.
I want to create a kind of a BOM in EH&S for my material with the INCI codes:
Material XXX consists of:
INCI A 20 % (and CAS number A1 20%)
INCI B 70 % (and CAS number B1 70%)
INCI C 10 % (and CAS number B1 10%).
I'm not familiar with EH&S but I carried out some testing and found out that I can link the material with the "real substance"? I think I need to create one substance for each INCI code which makes a bit annoying. The point is that when you insert your "BOM" for the new material you can easily pick up the existing INCIs - not having to write them all over again.
I couldn't find anywhere place for the percentages! We need them for calculations elsewhere. I read SAP documentation but couldn't find anything there either.
Thanks for the help.
Regards,
Pipsa
Hi Pipsa,
If you want to do it manually:
According to the standard EH&S data model you should create new specifications in transaction CG02 with specification type PURE_SUB. The CAS number you should enter on the identifier tab page (NUM/CAS). You should also enter the INCI code on this tab, but I am not sure if the INCI code is part of the EH&S standard identifier, so maybe you have to customize it.
For your material XXX you should create a REAL_SUB (for real existing substances in the material master). Create some unseful identifier (like NAM/MAT for material name) and assign the material number on the material assignment tab.
Now jump to the property tree and look for the right composition (for example Standard Composition) to mantain your BOM (which is called BOS - Bill of Substances - in EH&S).
Enter the 3 PURE_SUBs that you created before with the percentages.
Hope it helps,
Andreas
Similar Messages
-
About a week ago I started getting phone calls on my cell phone from numbers that do not exist, including the area codes. I can not report these to the Do Not Call list because the area code is non existent. I'm getting these calls all the time now and never from the same number twice so there's no point in blocking them. If I answer I may or may not get a person who has an accent from India so heavy that I can't understand what they are saying. This is getting to the point where I just want to cry I'm so frustrated. Anyone else having this issue or does anyone know how to stop it?
Thank youI'm sorry that you are having all these troubles. I have sent you a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
I cannot get Elements 13.1 to download completely. I have 3 different case numbers from Adobe and nothing helps. I always get the "download failed" and the error code u44m1i210. I would either like to get the product downloaded or eliminate the constant attempt which just ties up my computer.
You could try the direct download links here
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
And here is some info on that error code
Error U44M1I210 | Install updates -
Apple Care - You need to specify what "case" and "dispatch" numbers are
Judgeing by the number of people asking this, Apple is really failing its users. When trying to track a repair the webpage requests "case,dispatch,zipcode,serial" numbers. What a load of crap. All we have is a tracking number from UPS and an Apple reference number. I sent my ipod off so how will I know the serial number and I'm not planning to move to America so I'll never have a zip code.
Rubbish customer service.
Does anyone have any advice?
Advent Centrino Windows XP
Advent Centrino Windows XPyour dispatch and case #'s can be found just by logging on with your ID and password, and when you do LOGIN, your information (case & dispatch) should be on the top of your screen. This is GUARANTEED to WORK.
-
Hi my case numbers is 30758085. I just try download apps store on my Verizon iPhone 4 but they keep ask me billling payment so I use my credit card but keep said wrong security codes so I check my apple itune balances said I owe itune 22.00 dollars but it not my apps download on my phone I always get free apps Download
Please don't post case numbers or other personal information here. None of us here (who will respond, anyway) work for Apple; we're all just fellow users.
Anyway, as regards the security code issue, this may help:
http://support.apple.com/kb/TS1646
and as regards the balance, first make sure you didn't make any in-app purchases. Many "free" apps, particularly games, have additional levels or features that cost money. Check your purchase history in your iTunes Store account and see what you're being charged for.
Regards. -
Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions. When I click to accept the terms and conditions, nothing happens and the editor fails to open. Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open. Any advice?
Premiere Elements 10 is now 64 bit, but not PSE10.
Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
Click image to enlarge
Turn off face recognition and the auto-analyzer to improve performance.
When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed. -
The itune card I have has a bar code and numbers underneath, however some of the numbers are missing is there anyway I can use this card?
Hi,
Here is a Support Article that will help:
http://support.apple.com/kb/HT6021
Cheers,
GB -
Case created without business partner, reason code and result code
In our CRM system, some cases was created without business partner, reason code and result code.
We created some customer functions to make these fields as mandatory, it always work for our technique people and process expert, but it didn't work for some users occasionally. We cannot debug it.
Can anyone tell me why and how to solve it?
Please help me !
Regards,
ShirleyHello Shirley,
Well, then I would check the code, which calls your custom function modules.
It may be possible, that you have an IF in the 'Main' program, which makes it possible to skip the custom FM for these users.
The reason I am assuming this, is that normally you need just to change attributes for a field to make it mandatory, or customizing like SHD0 makes this possible. If you use custom FM, you have to call them somewhere and this is the point I would be looking for.
Check the traces for the users and you should find, that the custom FM are not called for them.
My opinion, of course
Award points if this helps.
Regards,
Martin Kuma -
I'd like to program a LOCAL ACCESS NUMBER, then insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number]. Dialing the local, US access number is not an issue, but I can't find any info in the manual on how to insert a WAIT or PAUSE or how to insert the remaining string of international codes and destination phone number. Any help would be appreciated. Thanks!
How to Add Pauses when you Dial a Number on the Samsung Galaxy Note 3 - For Dummies
It is also described on page 42 of your owners manual... -
A few days ago I received a message saying I was the millionth visitor and had won a prize which included money and a disneyland visit. I was given a long code, two telephone numbers (one in Paris) and a timed count-down of a few seconds (when I picked up the message). This made me suspicious and I ignored the whole thing. Was this wise?
Yes, ignoring a message like that was wise.
Maybe you are interested in a deal on real estate in southern Florida, like about halfway between Naples and Fort Lauderdale just south of I-75? -
How do I change the phone number attached to my Icloud? All the codes and stuff are being sent to my old number.
Hello Babyygrl23,
Welcome to the Apple Support Communities!
It sounds like your iCloud Apple ID has a phone number associated with it that you would like to update. If this is the case, after signing in to the linked website below, you will see a section on the left side of the screen labeled Phone Numbers. You can edit the phone number associated with that account from there.
Apple - My Apple ID
Cheers,
Joe -
HELP! hp laserjet prints code and infinite blank pages!
hey guys,
ive got an early 2009 imac with 2.66ghz intel core 2 duo and 8gb ram,
im running latest mavericks and trying to use a hp laserjet 1320tn printer.
PROBLEM:
when i press print i get one page with a line of code and then infinite blank pages untill i hold cancel.
the line of code is :
%! PS-Adobe-3.0
%APL_DSC_Encoding: UTF8
%APLProducer: (Version 10.9.2 (Build 13c6
here are some things that i have tried:
* checked toner - 46% full
* using the printer set up on a network (unshared)
* using the printer via usb
* reseting printing system ( many times )
* using latest drivers
* using older drivers
* using alternate drivers from HP
* using a generic post script printer driver
* repair / verify disk permisions ( many times )
* (last resort) Clean install of osx mavericks with fresh hp updates
im fresh out of ideas guys
the printer has been checked with a windows laptop and it printed perfectly and immediately so its an issue with my mac
i dont really want to buy another printer as a need a small network duplex monochrome laserjet, and this is perfect ( except i cant get it to work !)
also i checked with the manufacturer and apple and this printer is supposedly supported.
any help would be awesome!OK here goes... (please take a deep breath)
I'm going to include TONS of details, hoping that something here might help you get to the answer.
If it's too much for your brain at whatever moment you get time to read all this, I do apologize.
Maybe come back later when they're sleeping and you're wide awake, if that is ever possible. I was a stay-at-home Dad for one precocious child for a few years, so I have a tiny idea what you're talking about, though our married friends with multiple (usually bickering) children always assured us that having just one child is nothing at all like having children. So bless you! My heart goes out to you!
Anyway, in Windows, there used to be a generic HPPCL driver and a generic PostScript driver for older printers. You could usually use a "generic" driver just fine, because very few programs (other than page layout and graphic design) used even 1/10th of the capabilities of the lowest-common-denominator oldest version PCL or PostScript command set. Something like that DOES exist in the Mavericks print installation dialogue.
But back to YOUR printer.
I tried installing my HP LaserJet 1320 on my iMac running Mavericks*.
Unlike Windows, you can't install a printer that OS X Mavericks cannot 'see', either directly connected or via a network 'share', or wirelessly.
My HP is connected via a network share. This should not significantly change what happens when you install your printer, but no guarantees.
This was my first attempt to install the HP, because my default printer is a Canon inkjet, connected wirelessly via WiFi.
So the LaserJet is in another room physically connected via USB to a MacBook, and marked 'Share this printer' on the MacBook system preferences. The MacBook has to be awake (not sleeping) and in this case, physically connected for my iMac to 'see' it.
So, when I clicked the + sign in the , System Preferences, Printers & Scanners to add a new printer,
I entered the description HP LaserJet 1320 into the search box the first time, then
1. Mavericks tried to "find" the HP LaserJet on the network, connected to the MacBook.
2. "This printer requires software that is not installed..."
3. "Downloading Printer Software Update..."
4. "Setting up "HP LaserJet 1320 Series @ KoMtB (MacBook's network name)
5. At that point the printer appeared in this Add window shown below:
Note the bottom Use: window below Location...
Note that the third choice is Generic PostScript Printer...
THIS IS THE ONLY PLACE AND THE ONLY TIME you can apparently select anything about which printer 'language' the Mac is going to use to talk to your printer:
In searching for about 10 minutes, I did not find any way to ever get BACK to this screen once the printer installation is complete, short of deleting and reinstalling the printer again, or adding the printer a second time with a different name.
I selected the choice highlighted, HP LaserJet 1320 series. I did a test print from TextEdit, and it worked perfectly the first time. I also tried it from Pages, and again, it worked perfectly, no spewing of PostScript initialization strings...
My suspicion is that maybe Generic PostScript Printer is getting selected by Mavericks somehow without ever informing the user.
Maybe 'Auto Select' does it. Don't know.
In any case, since you've already done a Printing System reset, you have nothing else (custom print job Presets) to lose by trying to reinstall it again.
I tried it, and It SHOULD also be possible to install the same printer multiple times, PROVIDED THAT you rename each one slightly during the Add process (HP-3200, HP-Auto Select, HP-Generic PostScript... ), so you can give several of them a try until you find one that actually works.
Now, here's how to find the 'generic' PCL printer driver...
Add the printer again, giving is a new name.
In Use: select "Select Software", then search for "HP LaserJet Series PCL 4/5"
HP LaserJet Series PCL 4/5 driver IS a 'generic' PCL driver, and SHOULD work for basic printing, provided that you DO NOT use the slash between 4/5 in the printer name use a dash - instead. When I tried it with a slash (probably because it was a network share, the printer did NOT install. When I tried again and used a dash, it worked fine.
The PCL 4/5 driver comes with a disclaimer as shown below:
Your HP is apparently from the year 2000? (Mine is from 2004.) It's so hard to give up old workhorse friends, especially when one toner costs almost a much as a new printer. The good news it that newer LaserJets are WAAAAAAY faster, and a toner for a new model still costs almost as much as a new printer...
After years of buying ONLY genuine HP toner, I finally purchased a generic toner cartridge online last year when I needed to print about 1500 pages. The high capacity generic refill cartridge cost 1/3 of price of a genuine HP 'standard capacity', and it works beautifully.
Of course this is time consuming, especially when you have active kiddos competing for your time, but the last alternative after Gutenprint is to purchase a new printer.
*DISCLAIMERS & FOOTNOTES:
I don't use OS X Mavericks much, so I'm really not the best person to ask. But I did answer this thread ages ago.
So, if none of this helps, please post your question again as a brand new message in the OS X Mavericks forum.
That way it will likely get far more 'views' than posting your question in an old thread already marked 'solved'.
From what I've seen in the Apple Support Communities, those most knowledgable tireless Saints of Mac with tens of thousands of reputation points who frequent these forums most every day usually look for the 'unanswered' and 'unsolved' questions first.
Mostly I use OS X 10.8 Mountain Lion, because that's what shipped already installed on my iMac that I purchased from Apple as a refurb in Dec 2013. And because 10.8 seemed more 'sorted out' than Mavericks did last December.
When I got my iMac last December, I immediately installed OS X 10.9 Mavericks on an external drive that I could select at boot time because:
1) I could get Mavericks for free (wasn't sure if it would be a limited-time thing)
2) Purchase of a new or refurb Mac then included a free iWorks suite (Numbers, Pages, Keynote) latest versions (wasn't sure if it would be a limited-time thing)
3) I have Windows 7 installed under Parallels 9 on Mavericks to run basically one legacy Windows application I spent years learning and still use once or twice a year. Honestly, almost the only time I use Mavericks is to run Parallels 9 and Windows 7 and that legacy Windows app.
4) My original Mac is a mid-2007 MacBook is still running OS X 10.6.8. That's what the HP printer is connected to. I now use the MacBook for email or when I need to take a computer somewhere else. My MacBook is not capable of being upgraded to run Mavericks, and I wanted to at least know about the current version of OS X, even if I NEVER upgraded my main system. -
How do I use switch and case statements to fill more than one other field?
Hi all,
I'm new to the community.
I'm trying to make an existing form more user friendly for my coworkers. I want to use a switch and case approach in a drop-down list field so that the selection fills two seperate other fields with different info related to the selection.
I can already do this with one field, but if I add a second target field under an existing case the text doesn't appear there when I make the selection from the dropdown.
Basically, I'm asking if I can do this:
switch
(sNewSel){
case "1": // Selection 1 Row2.Field1
= "text for field 1";
Row1.Field2 = "text for field 2";
break;
etc.
It works if the "row1.field2" option isn't there, but not when it is present.
Any takers?I'm not sure if I will be able to send you the form. There may be too much to redact.
Would this last bit of code in the cell affect anything?
if
(bEnableTextField)
{Row2.Field1.access
= "open"; // enable field
Row2.Field1.caption.font.fill.color.value= "0,0,0"; // set caption to black
That is, do I also need to repeat the same thing for the second target cell (Row1.Field2)?
What would be possible hang ups that would prevent it from working correctly?
Dave
By the way, I'm not sure if my other attachment posted. I am trying again. -
Sample JAVA Mobile Server Publish code, and technical questions
Dear Oracle technical representative, or user:
I need to programmatically create, and remove publications using the pure JAVA classes of Consolidator, ConsolidatorManager, and ResourceManager for the Mobile Server in OracleLite 9i Release 5.0.1. On the creation side I have managed to get the example found in the directory OraLite501\Mobile\Server\Sample\Sample11 functioning using my installation parameters. I had a very difficult time of it because (1) the sample11 code fails to open an jdbc connection to the Mobile Server Repository Schema with the function Consolidator.OpenConnection, and (2) the ResourceManager function openConnection will not work unless the Webtogo.ora file is in the current working directory. The ConsolidatorManager function OpenConnection may also not work unless the Webtogo.ora file is in the current working directory, but I did test the hypothesis. Both of these problems need to be addressed in the sample11 code, and documentation to save other software developers from wasting hours of their valuable time. See line 223, 386, and 448 in the Publish.Java code that follows this problem description.
With the above two problems resolved, I can now programmatically create publications, but no hints on how to programmatically remove a publication exist in the documentation. The application I am developing will require the dynamic creation, and removal of publications. Also, when developing applications the complete removal of a publication is absolutely necessary when you have botched a publication. Thus my first question is What sequence of ResourceManager, and ConsolidatorManager function calls will completely remove a Publication?.
I also have two issues remaining with the code that I have so far developed. These issues will most likely be resolved, when I obtain instructions on how to completely remove a publication, and associated users. But, perhaps not. Referencing the Publish.java file that follows this problem description,
1. The ResourceManager function dropUser does not drop a user. See my comments, and code beginning at line 277 in Publish.java. Do I need to de-instantiate all subscriptions, and unsubscribe all subscription users before calling this function.? I think, I tried the de-instantiate, unsubscribe sequence without success, but in the confusion I may not have made the try.
2. How do I get rid of an index created with the ConsolidatorManager function DropPublicationItemIndex?. My comments on this problem begin at line 522 in Publish.java. For some reason the DropPublicationItemIndex function call made below line 448 does not work. What function calls are required prior to calling the DropPublicationItemIndex function?
Throughout the Publish.java code, I have made comments about some of the problems that I have had in getting the sample11 code working for my installation parameters. I think these comments should help the programmers maintaining the ResourceManager, and ConsolidatorManager code improve the stability of the programs. Please pass these comments, and attached files to the appropriate individuals,
if you are in a position to do so.
The other files that follow the Publish.java code are
1. Compile.bat - Compiles Publish.java using j2sdk1.4.0.
2. Run.bat - Executes Publish using \ j2sdk1.4.0\jre\server\jvm.dll.
3. Webtogo.ora
4. tnsnames.ora for the Mobile Server.
5. tnsnames.ora for the Database.
Feel free to access my server if you need to do so in resolving my problems. The parameters you will need to gain access can be found at the top of Publish.java, and in the included *.ora files.
Thanks,
Thomas G. Matney
[email protected]
(662)325-2791
//Start of Publish.java code
// Oracle HTTP Server URL = http://yggdrasill.cfr.msstate.edu:7778
// = http://130.18.168.225:7778
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center username = administrator
// Mobile Server Control Center password = admin
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile administrator username = fiafield // Schema FIAFIELD on FIA.CFR.MSSTATE.EDU
// Mobile administrator password = fiafield // Username and password are the same
import java.sql.SQLException;
import java.sql.*;
import oracle.lite.sync.Consolidator;
import oracle.lite.sync.ConsolidatorManager;
import oracle.mobile.admin.ResourceManager;
import oracle.mobile.admin.ResException;
import oracle.sql.*;
import oracle.jdbc.*;
import oracle.mobile.admin.*;
public class Publish
// Schema names and usernames are not case sensitive.
// UN fiafield = FIAFIELD
// SCHEMA fiafield = FIAFIELD
// Schema name/Username, and password used on creation of Mobile Repository
static String CONS_SCHEMA = "fiafield";
static String DEFAULT_PASSWORD = "fiafield";
static String admin_jdbc_url = "jdbc:oracle:oci8:@WEBTOGO.WORLD";
static String thin_jdbc_url =
"jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU";
static String Publication;
static String CreateTreeTableShortNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "id FLOAT,"
+ "subp FLOAT,"
+ "rnum FLOAT,"
+ "st FLOAT,"
+ "unit FLOAT,"
+ "cnty FLOAT,"
+ "plot FLOAT,"
+ "cyc FLOAT,"
+ "scyc FLOAT,"
+ "tree FLOAT,"
+ "ncpt FLOAT NULL,"
+ "dist FLOAT NULL,"
+ "diam FLOAT NULL,"
+ "dmht FLOAT NULL,"
+ "dmck FLOAT NULL,"
+ "spec FLOAT NULL,"
+ "lang FLOAT NULL,"
+ "nctc FLOAT NULL,"
+ "stat FLOAT NULL,"
+ "util FLOAT NULL,"
+ "deca FLOAT NULL,"
+ "crat FLOAT NULL,"
+ "ccls FLOAT NULL,"
+ "az FLOAT NULL,"
+ "cond FLOAT NULL,"
+ "tlen FLOAT NULL,"
+ "alen FLOAT NULL,"
+ "lmet FLOAT NULL,"
+ "nctg FLOAT NULL,"
+ "rcul FLOAT NULL,"
+ "ncpd FLOAT NULL,"
+ "dead FLOAT NULL,"
+ "mor FLOAT NULL,"
+ "modm FLOAT NULL,"
+ "dml1 FLOAT NULL,"
+ "dmt1 FLOAT NULL,"
+ "dms1 FLOAT NULL,"
+ "dma1 FLOAT NULL,"
+ "dml2 FLOAT NULL,"
+ "dmt2 FLOAT NULL,"
+ "dms2 FLOAT NULL,"
+ "dma2 FLOAT NULL,"
+ "dml3 FLOAT NULL,"
+ "dmt3 FLOAT NULL,"
+ "dms3 FLOAT NULL,"
+ "dma3 FLOAT NULL,"
+ "dbtr FLOAT NULL,"
+ "dbsp FLOAT NULL,"
+ "nxtn FLOAT NULL,"
+ "dbds FLOAT NULL,"
+ "dbaz FLOAT NULL,"
+ "psta FLOAT NULL,"
+ "fiat FLOAT NULL,"
+ "fhmt FLOAT NULL"
+ ")";
static String CreateTreeTableLongNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "ID FLOAT,"
+ "SUBPLOT FLOAT,"
+ "RECORD_NUMBER FLOAT,"
+ "STATE FLOAT,"
+ "UNIT FLOAT,"
+ "COUNTY FLOAT,"
+ "PLOT FLOAT,"
+ "CYCLE FLOAT,"
+ "SUBCYCLE FLOAT,"
+ "TREE FLOAT,"
+ "NC_PLOT_TYPE FLOAT,"
+ "DISTANCE FLOAT NULL,"
+ "DIAMETER FLOAT NULL,"
+ "DIAMETER_HEIGHT FLOAT NULL,"
+ "DIAMETER_CHECK FLOAT NULL,"
+ "SPECIES FLOAT NULL,"
+ "LEAN_ANGLE FLOAT NULL,"
+ "NC_TREE_CLASS FLOAT NULL,"
+ "STATUS FLOAT NULL,"
+ "UTILIZATION FLOAT NULL,"
+ "DECAY FLOAT NULL,"
+ "CROWN_RATIO FLOAT NULL,"
+ "CROWN_CLASS FLOAT NULL,"
+ "AZIMUTH FLOAT NULL,"
+ "CONDITION FLOAT NULL,"
+ "TOTAL_LENGTH FLOAT NULL,"
+ "ACTUAL_LENGTH FLOAT NULL,"
+ "LENGTH_METHOD FLOAT NULL,"
+ "NC_TREE_GRADE FLOAT NULL,"
+ "ROTTEN_CULL FLOAT NULL,"
+ "NC_PREVIOUS_DBH FLOAT NULL,"
+ "CAUSE_OF_DEATH FLOAT NULL,"
+ "MORTALITY_YEAR FLOAT NULL,"
+ "MO_DAMAGE FLOAT NULL,"
+ "DAMAGE_LOCATION1 FLOAT NULL,"
+ "DAMAGE_TYPE1 FLOAT NULL,"
+ "DAMAGE_SEVERITY1 FLOAT NULL,"
+ "NC_DAMAGE_AGENT1 FLOAT NULL,"
+ "DAMAGE_LOCATION2 FLOAT NULL,"
+ "DAMAGE_TYPE2 FLOAT NULL,"
+ "DAMAGE_SEVERITY2 FLOAT NULL,"
+ "NC_DAMAGE_AGENT2 FLOAT NULL,"
+ "DAMAGE_LOCATION3 FLOAT NULL,"
+ "DAMAGE_TYPE3 FLOAT NULL,"
+ "DAMAGE_SEVERITY3 FLOAT NULL,"
+ "NC_DAMAGE_AGENT3 FLOAT NULL,"
+ "DB_TREE FLOAT NULL,"
+ "DB_SPECIES FLOAT NULL,"
+ "NEXT_NUMBER FLOAT NULL,"
+ "DB_DISTANCE FLOAT NULL,"
+ "DB_AZIMUTH FLOAT NULL,"
+ "PREVIOUS_STATUS FLOAT NULL,"
+ "FIA_TREE_NUMBER FLOAT NULL,"
+ "FHM_TREE FLOAT NULL"
+ ")";
public static void main(String argv[]) throws Throwable
// Publish - an OKAPI sample
if(argv.length == 2)
CONS_SCHEMA = argv[0] ;
DEFAULT_PASSWORD = argv[1] ;
//create required tables using standard jdbc
//DriverManager.registerDriver ((Driver)Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance ());
DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
Connection c = null;
Statement s = null;
try
// Open connection to Mobile Repositoty/FIAFIELD schema as SYSTEM.
// Need the ability to grant resources, and connection to Mobile Repository user
//c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD", "SYSTEM", "phwphw" );
// Remote connection. See attached webtogo.ora.
c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD.YGG",
"SYSTEM", "phwphw");
s = c.createStatement ();
try
s.executeUpdate("DROP table FIAFIELD.ZMTR1TBL");
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate(CreateTreeTableShortNames);
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate("alter table FIAFIELD.ZMTR1TBL add constraint"
+" zmtr1tbl_pk primary key(subp, tree)");
catch (SQLException ee)
ee.printStackTrace ();
// Line 223 // create consolidator publications.
try
// *****!!!!! Unless the Webtogo.ora file is in the current working
// directory the connection is not made. This version of the resource
// manager must be looking for the file in the old 8i Mobile default
// directory. This is a definite problem. If the code was working, the
// addition of the webtogo.ora should have affect on the functionality
// of the code.
// The connection is made to the Mobile Server. At least no exceptions
// are thrown, provided the webtogo.ora is in the current working
// directory.
//oracle.mobile.admin.ResourceManager.openConnection(CONS_SCHEMA, DEFAULT_PASSWORD);
// I tried making a direct connect to possibly avoid needing to have the
// webtogo.ora file in the current directory. The direct coonect did not work.
// You can quickly convince yourself that the webtogo.ora file must
// be in the current working directory, by running the code with and
// without the webtogo.ora in the current working directory.
// The directory OraLiteHome\Mobile\Server\bin is in the PATH after
// after installation but the extension .ora is not in PATHEXT. The
// OraLite installer should put .ora in PATHEXT. I tried adding .ora
// to the PATHEXT, but it still could not find thw webtogo.ora file,
// and it should have. What is going on? I am a bit rusty on DOS so
// I may not have thing right.
// OraLiteHome\Mobile\Server\bin is the residing directory for
// the functional copy of the webtogo.ora file.
oracle.mobile.admin.ResourceManager.openConnection(
CONS_SCHEMA,
DEFAULT_PASSWORD,
"jdbc:oracle:oci8:@WEBTOGO.WORLD");
catch(ResException ee)
ee.printStackTrace (); // NULL Pointer Exception?
// The Mobile user is created, and then the function throws a resource exception.
// This is a serious problem with the code. One would assume that the user
// is not created if and exception is thrown.
// This appears to be a bug in the createUser code. The function should return
// false if the user is not created, and handle, or not throw the exception.
// The function always returns false. It does return true when a user is created
// because it throws an exception.
boolean bIsCreated;
System.out.println("Begin of why is ResourceManager not dropping users?");
// Line 277
try
// The dropUser function will not drop a user. I have tested the function
// by creating the user ZMPT1UA in the Mobile Server Control Center
// http://Yggdrasill.cfr.msstate.edu/webtogo
// so I know that the user exist.
// This function throws a ResException but it is not declared correctly
// since you cannot trap the exception as a ResException. It always tells
// me the view does not exist. What steps are required to get the function
// to work? What function calls need to be made prior to calling the dropUser
// function.
oracle.mobile.admin.ResourceManager.dropUser("ZMPT1UA");
catch (Throwable ee)
ee.printStackTrace (); // NULL Pointer Exception?
System.out.println("End of why is ResourceManager not dropping users?");
try
bIsCreated = oracle.mobile.admin.ResourceManager.createUser(
"ZMPT1UA",
DEFAULT_PASSWORD,
"ZMPT1UA", "S");
catch (Throwable ee)
ee.printStackTrace (); // Ignore exception
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
// Create CONS_SCHEMA user on the database with the same username, and
// password as the user on the Mobile Server side. This is why the
// DriverManager connection was made as SYSTEM/phwphw.
// Grant ALL to repository, and user on replicated database
// On the database side there is a user with un = fiafield,
// and pw = fiafield, which is the same as the Mobile Repository
// schema name/password pair fiafield/fiafield. Can this duality
// create a problem? Probably not.
// Need SYSTEM ADMIN privilages for the next two steps, and that is
// why the coonection was established as SYSTEM/phwphw.
// Make user, and grants for Publish to user CONS_SCHEMA, and ZMPT1UA
System.out.println("Pargress point D");
try
s.execute("Create user " + "ZMPT1UA" + " identified by " + DEFAULT_PASSWORD);
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + CONS_SCHEMA + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + "ZMPT1UA" + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
/* This code is not needed to test the code
// Insert items into table FIAFIELD.ZMTR1TBL from FIAFIELD.HUSKY_TREE
String Statement =
"INSERT INTO FIAFIELD.ZMTR1TBL SELECT * from FIAFIELD.HUSKY_TREE WHERE PLOT = 1";
try
s.execute(Statement);
catch (SQLException ee)
System.out.println("FIAFIELD.HUSKY_TREE was not inserted into FIAFIELD.ZMTR1TBL");
ee.printStackTrace (); // ignore
c.commit ();
catch (SQLException ee)
ee.printStackTrace ();
finally
if (s!= null) try {s.close ();}catch (SQLException e1){}
if (c!= null) try {c.close ();}catch (SQLException e2){}
// The Consolidator class is not thread safe, and I will eventually
// need thread safety. The ConsolidatorManage class is thread safe.
//Consolidator ConsolidatorXX = new Consolidator();
ConsolidatorManager ConsolidatorXX = new ConsolidatorManager();
// Line 386
// Try opening a connection. Sample11 does not open a connection, but it seems
// like a logical first thing to do.
// At least with this connection the DropPublication, and AddPublication functions
// appear to work, or at least they do not throw exceptions. The DropPublication
// throws an exception if a publication does not exist? I tested this and indeed
// if I call the DropPublication function, and do not create the Publication again
// when I reenter the program the DropPublication function throws an exception, and
// produces the correct error message(The publication does not exist). There is hope.
// It is very disturbing that the program fails unless the webtogo.ora file is not
// in the current working directory. Because the OpenConnection functions of both
// the ResourceManager, and ConsolidatorManager both appear to need access to the
// webtogo.ora file, and they are finding them in the current directory, the
// logical conclusion is that both of the classes are attempting to open the
// webtogo.ora with the relative path webtogo.ora, and not the absolute path
// OraHomeLite/Mobile/Server/Bin/webtogo.ora. As this has to be the case, why
// is this very important fact not in the documentation? Or, am I wrong?
Connection conn = null;
try
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD);
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD,
//"jdbc:oracle:oci8:@WEBTOGO.WORLD");
conn = DriverManager.getConnection
("jdbc:oracle:oci8:@WEBTOGO.WORLD",
CONS_SCHEMA,DEFAULT_PASSWORD);
//conn = DriverManager.getConnection
//("jdbc:oracle:oci8:@WEBTOGO.WORLD",
//"SYSTEM","phwphw");
ConsolidatorXX.OpenConnection(conn);
catch (Throwable e)
e.printStackTrace(); //ignore error
// Publication name
Publication = "ZMTR1PUB";
try
ConsolidatorXX.DeinstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
System.out.println("Could not Deinstantiate Subscription ZMPT1UA");
e.printStackTrace(); //ignore error
// Line 448
// There is no Consolidator.OpenConnection in the orginal sample11.java code.
// Why?. It appears to be neccessary. The only way I can make the sample11 code
// or this program work is to open a jdbc connection with the Consolidator.OpenConnection
// function. I assume that somehow the Consolidator.OpenConnection function was
// deleted from sample11.java.
// This try to drop a publication index does not work, because when I try
// to recreate the index in the following code it warns me that I have a
// bad column name for the index. So it thinks the index still exist.
// Why?. How do I get rid of the index?
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItem("ZMTR1ITM");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublication(Publication);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
//ConsolidatorXX.CreatePublication(Publication, Consolidator.OKPI_CREATOR_ID,
//"zMTR1.%s", null);
ConsolidatorXX.CreatePublication(Publication, Consolidator.OKAPI_WINCE,
"zMTR1.%s", null);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.CreatePublicationItem("ZMTR1ITM","FIAFIELD","ZMTR1TBL", "F",
"SELECT * FROM FIAFIELD.ZMTR1TBL", null, null);
catch (Throwable e)
e.printStackTrace();
System.out.println("Begin of how can drop this index and get rid of the warning?");
// Line 522
// I defined the index ZMTR1IX1 originally on the variable subp, and did not get
// any warning. I then changed the index variable for the index to id, and started
// receiving the warning to check the index column for typographical errors. Even
// if I change the index variable back to subp, I continue to receive the warning.
// How do I get rid of the index and the warning, so I can recreate the index for
// another variable? I quess the real question is "How to I completely remove a
// publication, and all of its parts so I can start over?
try
ConsolidatorXX.CreatePublicationItemIndex(
"ZMTR1IX1", "ZMTR1ITM", "I", "id");
catch (Throwable e)
e.printStackTrace ();
System.out.println("End of how can drop this index and get rid of the warning?");
try
ConsolidatorXX.AddPublicationItem(
Publication, "ZMTR1ITM", null, null, "S", null, null);
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CreateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.InstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CloseConnection();
if(conn != null)
conn.close();
catch (Throwable e)
e.printStackTrace(); //ignore error
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
oracle.mobile.admin.ResourceManager.closeConnection();
End of Publish.java code
Begin Compile.bat
set CLASSPATH = .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\javac Publish.java
End Compile.bat
Begin Run.bat
set CLASSPATH= .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\java Publish
End Run.bat
Begin webtogo.ora
USE_SYSTEM_CLASSPATH = NO
MODE = SERVER
PORT = 80
BASE_URL=/webtogo
ADMIN_TNS_NAME=WEBTOGO.WORLD
ADMIN_JDBC_URL=jdbc:oracle:oci8:@WEBTOGO.WORLD
APPLET_USE_THIN_JDBC = YES
THIN_JDBC_URL=jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU
SITE_OFFLINE_PERIOD=0
CUSTOM_WORKSPACE=no
CUSTOM_DIRECTORY=myworkspace
DEFAULT_PAGE=myfirstpage.html
ADMIN_USER=8B37E78535B55525292A3A2929292999
ADMIN_PASSWORD=873515A838B85828292A3A2929292999
[EXTERNAL_AUTHENTICATION]
#CLASS=com.acme.SampleAuthenticator
# Web-to-go workspace's font
FONT_NAME=Arial
[FILESYSTEM]
#ROOT_DIR=%WEBTOGO_HOME%\server
#TYPE=O8
#TYPE=OL
#TYPE=OS
# Cache size in MBs
#CACHE_SIZE=10
MAX_CONNECTIONS=4
[DEBUG]
#ENABLE=YES
# The log file name.
#LOG_FILE=test.log
# Machine name and port where wsh.exe -m is running. Web-to-go
# will send debug output to that machine.
#MACHINE=
#PORT=100
[APPLICATIONS]
XMLFILE = ws1.xml
PACK_HELP=D:\OraLite501\mobile\doc\wtg\html\wtgdep.htm
[PUBLIC]
oracle.lite.sync.ConsolidatorServlet=/Consolidator
[CONSOLIDATOR]
# Installer will change these values
SERVER_VERSION=8.1.5
# 8.0.5 or 8.1.5
# Installer won't change these values
MAX_THREADS=3
JDBC_DRIVER=oracle.jdbc.driver.OracleDriver
CREATE_USER_OPTIONS_O8I=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USERS QUOTA UNLIMITED ON USERS TEMPORARY TABLESPACE INDX QUOTA UNLIMITED ON INDX
CREATE_USER_OPTIONS_O8=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USR QUOTA UNLIMITED ON USR
TEMPORARY TABLESPACE TEMPORARY QUOTA UNLIMITED ON TEMPORARY
TEMP=c:\\temp
WTG_PROXY_PORT=80
TRACE=NO
TRACE_ALL=NO
End webtogo.ora
Begin Mobile Server tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\OraLite501\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
WEBTOGO.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
WEBTOGO.WORLD.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
End Mobile Server tnsnames.ora file
Begin Database tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGGDRASILL.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
End Database tnsnames.ora fileDear Oracle technical representative, or user:
I need to programmatically create, and remove publications using the pure JAVA classes of Consolidator, ConsolidatorManager, and ResourceManager for the Mobile Server in OracleLite 9i Release 5.0.1. On the creation side I have managed to get the example found in the directory OraLite501\Mobile\Server\Sample\Sample11 functioning using my installation parameters. I had a very difficult time of it because (1) the sample11 code fails to open an jdbc connection to the Mobile Server Repository Schema with the function Consolidator.OpenConnection, and (2) the ResourceManager function openConnection will not work unless the Webtogo.ora file is in the current working directory. The ConsolidatorManager function OpenConnection may also not work unless the Webtogo.ora file is in the current working directory, but I did test the hypothesis. Both of these problems need to be addressed in the sample11 code, and documentation to save other software developers from wasting hours of their valuable time. See line 223, 386, and 448 in the Publish.Java code that follows this problem description.
With the above two problems resolved, I can now programmatically create publications, but no hints on how to programmatically remove a publication exist in the documentation. The application I am developing will require the dynamic creation, and removal of publications. Also, when developing applications the complete removal of a publication is absolutely necessary when you have botched a publication. Thus my first question is What sequence of ResourceManager, and ConsolidatorManager function calls will completely remove a Publication?.
I also have two issues remaining with the code that I have so far developed. These issues will most likely be resolved, when I obtain instructions on how to completely remove a publication, and associated users. But, perhaps not. Referencing the Publish.java file that follows this problem description,
1. The ResourceManager function dropUser does not drop a user. See my comments, and code beginning at line 277 in Publish.java. Do I need to de-instantiate all subscriptions, and unsubscribe all subscription users before calling this function.? I think, I tried the de-instantiate, unsubscribe sequence without success, but in the confusion I may not have made the try.
2. How do I get rid of an index created with the ConsolidatorManager function DropPublicationItemIndex?. My comments on this problem begin at line 522 in Publish.java. For some reason the DropPublicationItemIndex function call made below line 448 does not work. What function calls are required prior to calling the DropPublicationItemIndex function?
Throughout the Publish.java code, I have made comments about some of the problems that I have had in getting the sample11 code working for my installation parameters. I think these comments should help the programmers maintaining the ResourceManager, and ConsolidatorManager code improve the stability of the programs. Please pass these comments, and attached files to the appropriate individuals,
if you are in a position to do so.
The other files that follow the Publish.java code are
1. Compile.bat - Compiles Publish.java using j2sdk1.4.0.
2. Run.bat - Executes Publish using \ j2sdk1.4.0\jre\server\jvm.dll.
3. Webtogo.ora
4. tnsnames.ora for the Mobile Server.
5. tnsnames.ora for the Database.
Feel free to access my server if you need to do so in resolving my problems. The parameters you will need to gain access can be found at the top of Publish.java, and in the included *.ora files.
Thanks,
Thomas G. Matney
[email protected]
(662)325-2791
//Start of Publish.java code
// Oracle HTTP Server URL = http://yggdrasill.cfr.msstate.edu:7778
// = http://130.18.168.225:7778
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center URL = http://yggdrasill.cfr.msstate.edu/webtogo
// = http://130.18.168.225/webtogo
// Mobile Server Control Center username = administrator
// Mobile Server Control Center password = admin
// Mobile Server URL = http://yggdrasill.cfr.msstate.edu/webtogo/startup
// = http://130.18.168.225/webtogo/startup
// Mobile administrator username = fiafield // Schema FIAFIELD on FIA.CFR.MSSTATE.EDU
// Mobile administrator password = fiafield // Username and password are the same
import java.sql.SQLException;
import java.sql.*;
import oracle.lite.sync.Consolidator;
import oracle.lite.sync.ConsolidatorManager;
import oracle.mobile.admin.ResourceManager;
import oracle.mobile.admin.ResException;
import oracle.sql.*;
import oracle.jdbc.*;
import oracle.mobile.admin.*;
public class Publish
// Schema names and usernames are not case sensitive.
// UN fiafield = FIAFIELD
// SCHEMA fiafield = FIAFIELD
// Schema name/Username, and password used on creation of Mobile Repository
static String CONS_SCHEMA = "fiafield";
static String DEFAULT_PASSWORD = "fiafield";
static String admin_jdbc_url = "jdbc:oracle:oci8:@WEBTOGO.WORLD";
static String thin_jdbc_url =
"jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU";
static String Publication;
static String CreateTreeTableShortNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "id FLOAT,"
+ "subp FLOAT,"
+ "rnum FLOAT,"
+ "st FLOAT,"
+ "unit FLOAT,"
+ "cnty FLOAT,"
+ "plot FLOAT,"
+ "cyc FLOAT,"
+ "scyc FLOAT,"
+ "tree FLOAT,"
+ "ncpt FLOAT NULL,"
+ "dist FLOAT NULL,"
+ "diam FLOAT NULL,"
+ "dmht FLOAT NULL,"
+ "dmck FLOAT NULL,"
+ "spec FLOAT NULL,"
+ "lang FLOAT NULL,"
+ "nctc FLOAT NULL,"
+ "stat FLOAT NULL,"
+ "util FLOAT NULL,"
+ "deca FLOAT NULL,"
+ "crat FLOAT NULL,"
+ "ccls FLOAT NULL,"
+ "az FLOAT NULL,"
+ "cond FLOAT NULL,"
+ "tlen FLOAT NULL,"
+ "alen FLOAT NULL,"
+ "lmet FLOAT NULL,"
+ "nctg FLOAT NULL,"
+ "rcul FLOAT NULL,"
+ "ncpd FLOAT NULL,"
+ "dead FLOAT NULL,"
+ "mor FLOAT NULL,"
+ "modm FLOAT NULL,"
+ "dml1 FLOAT NULL,"
+ "dmt1 FLOAT NULL,"
+ "dms1 FLOAT NULL,"
+ "dma1 FLOAT NULL,"
+ "dml2 FLOAT NULL,"
+ "dmt2 FLOAT NULL,"
+ "dms2 FLOAT NULL,"
+ "dma2 FLOAT NULL,"
+ "dml3 FLOAT NULL,"
+ "dmt3 FLOAT NULL,"
+ "dms3 FLOAT NULL,"
+ "dma3 FLOAT NULL,"
+ "dbtr FLOAT NULL,"
+ "dbsp FLOAT NULL,"
+ "nxtn FLOAT NULL,"
+ "dbds FLOAT NULL,"
+ "dbaz FLOAT NULL,"
+ "psta FLOAT NULL,"
+ "fiat FLOAT NULL,"
+ "fhmt FLOAT NULL"
+ ")";
static String CreateTreeTableLongNames =
"CREATE TABLE FIAFIELD.ZMTR1TBL("
+ "ID FLOAT,"
+ "SUBPLOT FLOAT,"
+ "RECORD_NUMBER FLOAT,"
+ "STATE FLOAT,"
+ "UNIT FLOAT,"
+ "COUNTY FLOAT,"
+ "PLOT FLOAT,"
+ "CYCLE FLOAT,"
+ "SUBCYCLE FLOAT,"
+ "TREE FLOAT,"
+ "NC_PLOT_TYPE FLOAT,"
+ "DISTANCE FLOAT NULL,"
+ "DIAMETER FLOAT NULL,"
+ "DIAMETER_HEIGHT FLOAT NULL,"
+ "DIAMETER_CHECK FLOAT NULL,"
+ "SPECIES FLOAT NULL,"
+ "LEAN_ANGLE FLOAT NULL,"
+ "NC_TREE_CLASS FLOAT NULL,"
+ "STATUS FLOAT NULL,"
+ "UTILIZATION FLOAT NULL,"
+ "DECAY FLOAT NULL,"
+ "CROWN_RATIO FLOAT NULL,"
+ "CROWN_CLASS FLOAT NULL,"
+ "AZIMUTH FLOAT NULL,"
+ "CONDITION FLOAT NULL,"
+ "TOTAL_LENGTH FLOAT NULL,"
+ "ACTUAL_LENGTH FLOAT NULL,"
+ "LENGTH_METHOD FLOAT NULL,"
+ "NC_TREE_GRADE FLOAT NULL,"
+ "ROTTEN_CULL FLOAT NULL,"
+ "NC_PREVIOUS_DBH FLOAT NULL,"
+ "CAUSE_OF_DEATH FLOAT NULL,"
+ "MORTALITY_YEAR FLOAT NULL,"
+ "MO_DAMAGE FLOAT NULL,"
+ "DAMAGE_LOCATION1 FLOAT NULL,"
+ "DAMAGE_TYPE1 FLOAT NULL,"
+ "DAMAGE_SEVERITY1 FLOAT NULL,"
+ "NC_DAMAGE_AGENT1 FLOAT NULL,"
+ "DAMAGE_LOCATION2 FLOAT NULL,"
+ "DAMAGE_TYPE2 FLOAT NULL,"
+ "DAMAGE_SEVERITY2 FLOAT NULL,"
+ "NC_DAMAGE_AGENT2 FLOAT NULL,"
+ "DAMAGE_LOCATION3 FLOAT NULL,"
+ "DAMAGE_TYPE3 FLOAT NULL,"
+ "DAMAGE_SEVERITY3 FLOAT NULL,"
+ "NC_DAMAGE_AGENT3 FLOAT NULL,"
+ "DB_TREE FLOAT NULL,"
+ "DB_SPECIES FLOAT NULL,"
+ "NEXT_NUMBER FLOAT NULL,"
+ "DB_DISTANCE FLOAT NULL,"
+ "DB_AZIMUTH FLOAT NULL,"
+ "PREVIOUS_STATUS FLOAT NULL,"
+ "FIA_TREE_NUMBER FLOAT NULL,"
+ "FHM_TREE FLOAT NULL"
+ ")";
public static void main(String argv[]) throws Throwable
// Publish - an OKAPI sample
if(argv.length == 2)
CONS_SCHEMA = argv[0] ;
DEFAULT_PASSWORD = argv[1] ;
//create required tables using standard jdbc
//DriverManager.registerDriver ((Driver)Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance ());
DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
Connection c = null;
Statement s = null;
try
// Open connection to Mobile Repositoty/FIAFIELD schema as SYSTEM.
// Need the ability to grant resources, and connection to Mobile Repository user
//c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD", "SYSTEM", "phwphw" );
// Remote connection. See attached webtogo.ora.
c = DriverManager.getConnection ("jdbc:oracle:oci8:@WEBTOGO.WORLD.YGG",
"SYSTEM", "phwphw");
s = c.createStatement ();
try
s.executeUpdate("DROP table FIAFIELD.ZMTR1TBL");
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate(CreateTreeTableShortNames);
catch (SQLException ee)
ee.printStackTrace ();
try
s.executeUpdate("alter table FIAFIELD.ZMTR1TBL add constraint"
+" zmtr1tbl_pk primary key(subp, tree)");
catch (SQLException ee)
ee.printStackTrace ();
// Line 223 // create consolidator publications.
try
// *****!!!!! Unless the Webtogo.ora file is in the current working
// directory the connection is not made. This version of the resource
// manager must be looking for the file in the old 8i Mobile default
// directory. This is a definite problem. If the code was working, the
// addition of the webtogo.ora should have affect on the functionality
// of the code.
// The connection is made to the Mobile Server. At least no exceptions
// are thrown, provided the webtogo.ora is in the current working
// directory.
//oracle.mobile.admin.ResourceManager.openConnection(CONS_SCHEMA, DEFAULT_PASSWORD);
// I tried making a direct connect to possibly avoid needing to have the
// webtogo.ora file in the current directory. The direct coonect did not work.
// You can quickly convince yourself that the webtogo.ora file must
// be in the current working directory, by running the code with and
// without the webtogo.ora in the current working directory.
// The directory OraLiteHome\Mobile\Server\bin is in the PATH after
// after installation but the extension .ora is not in PATHEXT. The
// OraLite installer should put .ora in PATHEXT. I tried adding .ora
// to the PATHEXT, but it still could not find thw webtogo.ora file,
// and it should have. What is going on? I am a bit rusty on DOS so
// I may not have thing right.
// OraLiteHome\Mobile\Server\bin is the residing directory for
// the functional copy of the webtogo.ora file.
oracle.mobile.admin.ResourceManager.openConnection(
CONS_SCHEMA,
DEFAULT_PASSWORD,
"jdbc:oracle:oci8:@WEBTOGO.WORLD");
catch(ResException ee)
ee.printStackTrace (); // NULL Pointer Exception?
// The Mobile user is created, and then the function throws a resource exception.
// This is a serious problem with the code. One would assume that the user
// is not created if and exception is thrown.
// This appears to be a bug in the createUser code. The function should return
// false if the user is not created, and handle, or not throw the exception.
// The function always returns false. It does return true when a user is created
// because it throws an exception.
boolean bIsCreated;
System.out.println("Begin of why is ResourceManager not dropping users?");
// Line 277
try
// The dropUser function will not drop a user. I have tested the function
// by creating the user ZMPT1UA in the Mobile Server Control Center
// http://Yggdrasill.cfr.msstate.edu/webtogo
// so I know that the user exist.
// This function throws a ResException but it is not declared correctly
// since you cannot trap the exception as a ResException. It always tells
// me the view does not exist. What steps are required to get the function
// to work? What function calls need to be made prior to calling the dropUser
// function.
oracle.mobile.admin.ResourceManager.dropUser("ZMPT1UA");
catch (Throwable ee)
ee.printStackTrace (); // NULL Pointer Exception?
System.out.println("End of why is ResourceManager not dropping users?");
try
bIsCreated = oracle.mobile.admin.ResourceManager.createUser(
"ZMPT1UA",
DEFAULT_PASSWORD,
"ZMPT1UA", "S");
catch (Throwable ee)
ee.printStackTrace (); // Ignore exception
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
// Create CONS_SCHEMA user on the database with the same username, and
// password as the user on the Mobile Server side. This is why the
// DriverManager connection was made as SYSTEM/phwphw.
// Grant ALL to repository, and user on replicated database
// On the database side there is a user with un = fiafield,
// and pw = fiafield, which is the same as the Mobile Repository
// schema name/password pair fiafield/fiafield. Can this duality
// create a problem? Probably not.
// Need SYSTEM ADMIN privilages for the next two steps, and that is
// why the coonection was established as SYSTEM/phwphw.
// Make user, and grants for Publish to user CONS_SCHEMA, and ZMPT1UA
System.out.println("Pargress point D");
try
s.execute("Create user " + "ZMPT1UA" + " identified by " + DEFAULT_PASSWORD);
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + CONS_SCHEMA + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
try
s.execute("GRANT ALL ON FIAFIELD.ZMTR1TBL to " + "ZMPT1UA" + " WITH GRANT OPTION");
catch (SQLException ee)
ee.printStackTrace (); // ignore
/* This code is not needed to test the code
// Insert items into table FIAFIELD.ZMTR1TBL from FIAFIELD.HUSKY_TREE
String Statement =
"INSERT INTO FIAFIELD.ZMTR1TBL SELECT * from FIAFIELD.HUSKY_TREE WHERE PLOT = 1";
try
s.execute(Statement);
catch (SQLException ee)
System.out.println("FIAFIELD.HUSKY_TREE was not inserted into FIAFIELD.ZMTR1TBL");
ee.printStackTrace (); // ignore
c.commit ();
catch (SQLException ee)
ee.printStackTrace ();
finally
if (s!= null) try {s.close ();}catch (SQLException e1){}
if (c!= null) try {c.close ();}catch (SQLException e2){}
// The Consolidator class is not thread safe, and I will eventually
// need thread safety. The ConsolidatorManage class is thread safe.
//Consolidator ConsolidatorXX = new Consolidator();
ConsolidatorManager ConsolidatorXX = new ConsolidatorManager();
// Line 386
// Try opening a connection. Sample11 does not open a connection, but it seems
// like a logical first thing to do.
// At least with this connection the DropPublication, and AddPublication functions
// appear to work, or at least they do not throw exceptions. The DropPublication
// throws an exception if a publication does not exist? I tested this and indeed
// if I call the DropPublication function, and do not create the Publication again
// when I reenter the program the DropPublication function throws an exception, and
// produces the correct error message(The publication does not exist). There is hope.
// It is very disturbing that the program fails unless the webtogo.ora file is not
// in the current working directory. Because the OpenConnection functions of both
// the ResourceManager, and ConsolidatorManager both appear to need access to the
// webtogo.ora file, and they are finding them in the current directory, the
// logical conclusion is that both of the classes are attempting to open the
// webtogo.ora with the relative path webtogo.ora, and not the absolute path
// OraHomeLite/Mobile/Server/Bin/webtogo.ora. As this has to be the case, why
// is this very important fact not in the documentation? Or, am I wrong?
Connection conn = null;
try
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD);
//ConsolidatorXX.OpenConnection(CONS_SCHEMA,
//DEFAULT_PASSWORD,
//"jdbc:oracle:oci8:@WEBTOGO.WORLD");
conn = DriverManager.getConnection
("jdbc:oracle:oci8:@WEBTOGO.WORLD",
CONS_SCHEMA,DEFAULT_PASSWORD);
//conn = DriverManager.getConnection
//("jdbc:oracle:oci8:@WEBTOGO.WORLD",
//"SYSTEM","phwphw");
ConsolidatorXX.OpenConnection(conn);
catch (Throwable e)
e.printStackTrace(); //ignore error
// Publication name
Publication = "ZMTR1PUB";
try
ConsolidatorXX.DeinstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
System.out.println("Could not Deinstantiate Subscription ZMPT1UA");
e.printStackTrace(); //ignore error
// Line 448
// There is no Consolidator.OpenConnection in the orginal sample11.java code.
// Why?. It appears to be neccessary. The only way I can make the sample11 code
// or this program work is to open a jdbc connection with the Consolidator.OpenConnection
// function. I assume that somehow the Consolidator.OpenConnection function was
// deleted from sample11.java.
// This try to drop a publication index does not work, because when I try
// to recreate the index in the following code it warns me that I have a
// bad column name for the index. So it thinks the index still exist.
// Why?. How do I get rid of the index?
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItem("ZMTR1ITM");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublication(Publication);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
//ConsolidatorXX.CreatePublication(Publication, Consolidator.OKPI_CREATOR_ID,
//"zMTR1.%s", null);
ConsolidatorXX.CreatePublication(Publication, Consolidator.OKAPI_WINCE,
"zMTR1.%s", null);
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.DropPublicationItemIndex("ZMTR1IX1");
catch (Throwable e)
e.printStackTrace(); //ignore error
try
ConsolidatorXX.CreatePublicationItem("ZMTR1ITM","FIAFIELD","ZMTR1TBL", "F",
"SELECT * FROM FIAFIELD.ZMTR1TBL", null, null);
catch (Throwable e)
e.printStackTrace();
System.out.println("Begin of how can drop this index and get rid of the warning?");
// Line 522
// I defined the index ZMTR1IX1 originally on the variable subp, and did not get
// any warning. I then changed the index variable for the index to id, and started
// receiving the warning to check the index column for typographical errors. Even
// if I change the index variable back to subp, I continue to receive the warning.
// How do I get rid of the index and the warning, so I can recreate the index for
// another variable? I quess the real question is "How to I completely remove a
// publication, and all of its parts so I can start over?
try
ConsolidatorXX.CreatePublicationItemIndex(
"ZMTR1IX1", "ZMTR1ITM", "I", "id");
catch (Throwable e)
e.printStackTrace ();
System.out.println("End of how can drop this index and get rid of the warning?");
try
ConsolidatorXX.AddPublicationItem(
Publication, "ZMTR1ITM", null, null, "S", null, null);
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CreateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.InstantiateSubscription(Publication, "ZMPT1UA");
catch (Throwable e)
e.printStackTrace ();
try
ConsolidatorXX.CloseConnection();
if(conn != null)
conn.close();
catch (Throwable e)
e.printStackTrace(); //ignore error
// Obsolete or depreciated function, according to documentation?
oracle.mobile.admin.ResourceManager.commitTransaction();
oracle.mobile.admin.ResourceManager.closeConnection();
End of Publish.java code
Begin Compile.bat
set CLASSPATH = .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\javac Publish.java
End Compile.bat
Begin Run.bat
set CLASSPATH= .;D:\jdk1.4.0\lib\tools.jar;D:\OraLite501\MOBILE\classes\CONSOLIDATOR.JAR;D:\OraLite501\MOBILE\SERVER\BIN\WEBTOGO.JAR;D:\OraLite501\jdbc\lib\classes12.zip;D:\OraLite501\MOBILE\classes\classgen.jar;D:\OraLite501\MOBILE\classes\servlet.jar;D:\OraLite501\MOBILE\CLASSES\OLITE40.JAR
set PATH= d:\jdk1.4.0\jre\bin\server;d:\jdk1.4.0\bin;D:\OraLite501\bin;D:\OraLite501\Mobile\Server\bin;D:\oracle\ora92\bin;D:\OraLite501\MOBILE\sdk\bin
d:\jdk1.4.0\bin\java Publish
End Run.bat
Begin webtogo.ora
USE_SYSTEM_CLASSPATH = NO
MODE = SERVER
PORT = 80
BASE_URL=/webtogo
ADMIN_TNS_NAME=WEBTOGO.WORLD
ADMIN_JDBC_URL=jdbc:oracle:oci8:@WEBTOGO.WORLD
APPLET_USE_THIN_JDBC = YES
THIN_JDBC_URL=jdbc:oracle:thin:@YGGDRASILL:1521:FIA.YGGDRASILL.CFR.MSSTATE.EDU
SITE_OFFLINE_PERIOD=0
CUSTOM_WORKSPACE=no
CUSTOM_DIRECTORY=myworkspace
DEFAULT_PAGE=myfirstpage.html
ADMIN_USER=8B37E78535B55525292A3A2929292999
ADMIN_PASSWORD=873515A838B85828292A3A2929292999
[EXTERNAL_AUTHENTICATION]
#CLASS=com.acme.SampleAuthenticator
# Web-to-go workspace's font
FONT_NAME=Arial
[FILESYSTEM]
#ROOT_DIR=%WEBTOGO_HOME%\server
#TYPE=O8
#TYPE=OL
#TYPE=OS
# Cache size in MBs
#CACHE_SIZE=10
MAX_CONNECTIONS=4
[DEBUG]
#ENABLE=YES
# The log file name.
#LOG_FILE=test.log
# Machine name and port where wsh.exe -m is running. Web-to-go
# will send debug output to that machine.
#MACHINE=
#PORT=100
[APPLICATIONS]
XMLFILE = ws1.xml
PACK_HELP=D:\OraLite501\mobile\doc\wtg\html\wtgdep.htm
[PUBLIC]
oracle.lite.sync.ConsolidatorServlet=/Consolidator
[CONSOLIDATOR]
# Installer will change these values
SERVER_VERSION=8.1.5
# 8.0.5 or 8.1.5
# Installer won't change these values
MAX_THREADS=3
JDBC_DRIVER=oracle.jdbc.driver.OracleDriver
CREATE_USER_OPTIONS_O8I=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USERS QUOTA UNLIMITED ON USERS TEMPORARY TABLESPACE INDX QUOTA UNLIMITED ON INDX
CREATE_USER_OPTIONS_O8=PROFILE CONSOLIDATOR_CLIENT_P DEFAULT TABLESPACE USR QUOTA UNLIMITED ON USR
TEMPORARY TABLESPACE TEMPORARY QUOTA UNLIMITED ON TEMPORARY
TEMP=c:\\temp
WTG_PROXY_PORT=80
TRACE=NO
TRACE_ALL=NO
End webtogo.ora
Begin Mobile Server tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\OraLite501\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
WEBTOGO.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
WEBTOGO.WORLD.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YGGDRASILL.CFR.MSSTATE.EDU)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
End Mobile Server tnsnames.ora file
Begin Database tnsnames.ora file
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGGDRASILL.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
FIA.YGG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
End Database tnsnames.ora file -
CASE STATEMENTS AND CASE EXPRESSIONS IN ORACLE9I PL/SQL
제품 : PL/SQL
작성날짜 : 2001-11-13
CASE STATEMENTS AND CASE EXPRESSIONS IN ORACLE9I PL/SQL
=======================================================
PURPOSE
아래의 자료는 Case 문에서 oracle 8.1.7과 Oracle 9i의 New Feature로 8.1.7에서는
sqlplus 에서만 가능했고, 9i 부터는 pl/sql 까지 가능하다.
Explanation
1. Oracle 8.1.7 Feature
Oracle 8.1.7 에서 Case 문은 Decode 문과 유사하지만, 기존의 decode 문을 쓰는 것보다
더 많은 확장성과 Logical Power와 좋은 성능을 제공한다. 주로 나이와 같이 category 별로
나눌때 주로 사용하고 Syntex는 아래와 같다.
CASE WHEN <cond1> THEN <v1> WHEN <cond2> THEN <v2> ... [ELSE <vn+1> ] END
각각의 WHEN...THEN 절의 argument 는 255 까지 가능하고 이 Limit를 해결하려면
Oracle 8i Reference를 참조하면 된다.
The maximum number of arguments in a CASE expression is 255, and each
WHEN ... THEN pair counts as two arguments. To avoid exceeding the limit of 128 choices,
you can nest CASE expressions. That is expr1 can itself be a CASE expression.
Case Example : 한 회사의 모든 종업원의 평균 봉급을 계산하는데 봉급이 $2000보다 작은경우
2000으로 계산을 하는 방법이 pl/sql을 대신하여 case function을 사용할 수 있다.
SELECT AVG(CASE when e.sal > 2000 THEN e.sal ELSE 2000 end) FROM emp e;
Case Example : 나이를 column으로 가지고 있는 customer table을 예로 들어보자.
SQL> SELECT
2 SUM(CASE WHEN age BETWEEN 70 AND 79 THEN 1 ELSE 0 END) as "70-79",
3 SUM(CASE WHEN age BETWEEN 80 AND 89 THEN 1 ELSE 0 END) as "80-89",
4 SUM(CASE WHEN age BETWEEN 90 AND 99 THEN 1 ELSE 0 END) as "90-99",
5 SUM(CASE WHEN age > 99 THEN 1 ELSE 0 END) as "100+"
6 FROM customer;
70-79 80-89 90-99 100+
4 2 3 1
1 SELECT
2 (CASE WHEN age BETWEEN 70 AND 79 THEN '70-79'
3 WHEN age BETWEEN 80 and 89 THEN '80-89'
4 WHEN age BETWEEN 90 and 99 THEN '90-99'
5 WHEN age > 99 THEN '100+' END) as age_group,
6 COUNT(*) as age_count
7 FROM customer
8 GROUP BY
9 (CASE WHEN age BETWEEN 70 AND 79 THEN '70-79'
10 WHEN age BETWEEN 80 and 89 THEN '80-89'
11 WHEN age BETWEEN 90 and 99 THEN '90-99'
12* WHEN age > 99 THEN '100+' END)
SQL> /
AGE_G AGE_COUNT
100+ 1
70-79 4
80-89 2
90-99 3
Example
2. Oracle 9i Feature
Oracle 9i부터는 pl/sql에서도 case문을 사용할 수 있으면 이것은
복잡한 if-else 구문을 없애고, C언어의 switch문과 같은 기능을 한다.
아래의 9i pl/sql Sample 및 제약 사항을 보면 아래와 같다.
Sample 1:
A simple example demonstrating the proper syntax for a case
statement
using a character variable as the selector. See the section entitled
'Restrictions' at the end of this article for details on which PLSQL
datatypes may appear as a selector in a case statement or
expression.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
begin
case achar
when 'A' then dbms_output.put_line('The description was Excellent');
when 'B' then dbms_output.put_line('The description was Very Good');
when 'C' then dbms_output.put_line('The description was Good');
when 'D' then dbms_output.put_line('The description was Fair');
when 'F' then dbms_output.put_line('The description was Poor');
else dbms_output.put_line('The description was No such Grade');
end case;
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 2:
A simple example demonstrating the proper syntax for a case
expression
using a character variable as the selector. See the section entitled
'Restrictions' at the end of this article for details on which PLSQL
datatypes may appear as a selector in a case statement or
expression.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
description varchar2(20);
begin
description :=
case achar
when 'A' then 'Excellent'
when 'B' then 'Very Good'
when 'C' then 'Good'
when 'D' then 'Fair'
when 'F' then 'Poor'
else 'No such grade'
end;
dbms_output.put_line('The description was ' || description);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
NOTE: The above simple samples demonstrate two subtle differences in the
syntax
required for case statements and expressions.
1) A case STATEMENT is terminated using the 'end case' keywords; a
case
EXPRESSION is terminated using only the 'end' keyword.
2) Each item in a case STATEMENT consists of one or more
statements, each
terminated by a semicolon. Each item in a case expression
consists of
exactly one expression, not terminated by a semicolon.
Sample 3:
Sample 1 demonstrates a simple case statement in which the selector
is
compared for equality with each item in the case statement body.
PL/SQL
also provides a 'searched' case statement as an alternative; rather
than
providing a selector and a list of values, each item in the body of
the
case statement provides its own predicate. This predicate can be any
valid boolean expression, but only one case will be selected.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
begin
case
when achar = 'A' then dbms_output.put_line('The description was
Excellent');
when achar = 'B' then dbms_output.put_line('The description was Very
Good');
when achar = 'C' then dbms_output.put_line('The description was
Good');
when achar = 'D' then dbms_output.put_line('The description was
Fair');
when achar = 'F' then dbms_output.put_line('The description was
Poor');
else dbms_output.put_line('The description was No such Grade');
end case;
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 4:
This sample demonstrates the proper syntax for a case expression of
the
type discussed in Sample 3 above.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
achar char(1) := '&achar';
description varchar2(20);
begin
description :=
case
when achar = 'A' then 'Excellent'
when achar = 'B' then 'Very Good'
when achar = 'C' then 'Good'
when achar = 'D' then 'Fair'
when achar = 'F' then 'Poor'
else 'No such grade'
end;
dbms_output.put_line('The description was ' || description);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 5:
This sample demonstrates the use of nested case statements. It is
also
permissable to nest case expressions within a case statement (though
it
is not demonstrated here), but nesting of case statements within a
case
expression is not possible since statements do not return any value.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
anum1 number := &anum1;
anum2 number := &anum2;
answer number;
begin
case anum1
when 1 then case anum2
when 1 then answer := 10;
when 2 then answer := 20;
when 3 then answer := 30;
else answer := 999;
end case;
when 2 then case anum2
when 1 then answer := 15;
when 2 then answer := 25;
when 3 then answer := 35;
else answer := 777;
end case;
else answer := 555;
end case;
dbms_output.put_line('The answer is ' || answer);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 6:
This sample demonstrates nesting of case expressions within another
case
expression. Note again the absence of semicolons to terminate both
the
nested case expression and the individual cases of those
expressions.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
declare
anum1 number := &anum1;
anum2 number := &anum2;
answer number;
begin
answer :=
case anum1
when 1 then case anum2
when 1 then 10
when 2 then 20
when 3 then 30
else 999
end
when 2 then case anum2
when 1 then 15
when 2 then 25
when 3 then 35
else 777
end
else 555
end;
dbms_output.put_line('The answer is ' || answer);
end;
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Although PL/SQL anonymous blocks have been used in all of the examples
so far,
case statements and expressions can also be used in procedures,
functions, and
packages with no changes to the syntax.
The following samples are included for completeness and demonstrate the
use of
case statements and/or expressions in each of these scenarios.
Sample 7:
This sample demonstrates use of a case statement in a stored
procedure.
Note that this sample also demonstrates that it is possible for each
of
the items in the case body to consist of more than one statement.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
create or replace procedure testcasestmt ( anum IN number ) is
begin
case
when anum = 1 then dbms_output.put_line('The number was One');
dbms_output.put_line('In case 1');
when anum = 2 then dbms_output.put_line('The number was Two');
dbms_output.put_line('In case 2');
when anum = 3 then dbms_output.put_line('The number was Three');
dbms_output.put_line('In case 3');
when anum = 4 then dbms_output.put_line('The number was Four');
dbms_output.put_line('In case 4');
when anum = 5 then dbms_output.put_line('The number was Five');
dbms_output.put_line('In case 5');
else dbms_output.put_line('The description was Invalid input');
dbms_output.put_line('In the else case');
end case;
end;
exec testcasestmt(&anum);
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 8:
This sample demonstrates the use of a case statement in a stored
package.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
create or replace package testpkg2 is
procedure testcasestmt ( anum IN number );
function testcasestmt_f ( anum IN number ) return number;
end testpkg2;
create or replace package body testpkg2 is
procedure testcasestmt ( anum IN number ) is
begin
case
when anum = 1 then dbms_output.put_line('The number was One');
dbms_output.put_line('In case 1');
when anum = 2 then dbms_output.put_line('The number was Two');
dbms_output.put_line('In case 2');
when anum = 3 then dbms_output.put_line('The number was Three');
dbms_output.put_line('In case 3');
when anum = 4 then dbms_output.put_line('The number was Four');
dbms_output.put_line('In case 4');
when anum = 5 then dbms_output.put_line('The number was Five');
dbms_output.put_line('In case 5');
else dbms_output.put_line('The description was Invalid input');
dbms_output.put_line('In the else case');
end case;
end;
function testcasestmt_f ( anum IN number ) return number is
begin
case
when anum = 1 then dbms_output.put_line('The number was One');
dbms_output.put_line('In case 1');
when anum = 2 then dbms_output.put_line('The number was Two');
dbms_output.put_line('In case 2');
when anum = 3 then dbms_output.put_line('The number was Three');
dbms_output.put_line('In case 3');
when anum = 4 then dbms_output.put_line('The number was Four');
dbms_output.put_line('In case 4');
when anum = 5 then dbms_output.put_line('The number was Five');
dbms_output.put_line('In case 5');
else dbms_output.put_line('The description was Invalid input');
dbms_output.put_line('In the else case');
end case;
return anum;
end;
end testpkg2;
exec testpkg2.testcasestmt(&anum);
variable numout number
exec :numout := testpkg2.testcasestmt_f(&anum);
print numout
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
Sample 9:
This sample demonstrates the use of a case expression in a stored
package.
- - - - - - - - - - - - - - - - Code begins here - - - - - - - - - - - -
set serveroutput on
create or replace package testpkg is
procedure testcase ( anum IN number );
function testcase_f ( anum IN number ) return number;
end testpkg;
create or replace package body testpkg is
procedure testcase ( anum IN number ) is
anumber number := anum;
anothernum number;
begin
anothernum :=
case
when anumber = 1 then anumber + 1
when anumber = 2 then anumber + 2
when anumber = 3 then anumber + 3
when anumber = 4 then anumber + 4
when anumber = 5 then anumber + 5
else 999
end;
dbms_output.put_line('The number was ' || anothernum);
end;
function testcase_f ( anum IN number ) return number is
anumber number := anum;
anothernum number;
begin
anothernum :=
case
when anumber = 1 then anumber + 1
when anumber = 2 then anumber + 2
when anumber = 3 then anumber + 3
when anumber = 4 then anumber + 4
when anumber = 5 then anumber + 5
else 999
end;
dbms_output.put_line('The number was ' || anothernum);
return anothernum;
end;
end testpkg;
variable numout number
exec testpkg.testcase(&anum);
exec :numout := testpkg.testcase_f(&anum);
print numout
- - - - - - - - - - - - - - - - Code ends here - - - - - - - - - - - -
제약 사항
다음의 databasetype은 case 문에서 지원되지 않는다.
BLOB
BFILE
VARRAY
Nested Table
PL/SQL Record
PL/SQL Version 2 tables (index by tables)
Object type (user-defined type)
All of these types except for object types face a similar restriction
even for if statements (i.e. they cannot be compared for equality directly) so this is unlikely to change for these types. Lack of support for object types is simply an implementation restriction which may be relaxed in future releases.
Reference Ducumment
Oracle 8.1.7 Manual
NOTE:131557.1I have done the following code but doesn't
like the statement of - "case(butNext)". What do you mean "doesn't like" -- did you get an error message?
I'm guessing it won't compile because you're trying to switch on a Button.
I tried something
like "g.fillOval(100,50,70,90, BorderLayout.NORTH)"...no that doesn't make sense. You only use BorderLayout.NORTH when you're adding components to a BorderLayout layout manager. An oval is not a component and fillOval isn't adding a component and Graphics is not a Panel or layout manager.
Would appreciate it if someone could tell me how to position
shapes using the graohic method. I think the problem is that you're confusing shapes with components.
Maybe you are looking for
-
Embedding Video in web page for iphone
Does anyone know of any good/favorite resources that do a walk-through on how to embed video into a web page so that it plays properly on the iPhone? Thanks.
-
As all the other N97 V2.1 threads seem to have gotten off topic I thought I would start this post for people to add their observations on the new firmware update. My observations: * RAM - Up to 10 MB more free and better RAM management, unfortunately
-
How to Create a connection and User Seesion and Authentificate Session
Hi I would like that someone provide my the code to set a connection with MDM through the MDM Java APIS SP6 Patch2. I need to connect with the repository, and authentificate the User and the Password. Furthermore I would need the code to pick up
-
Hi guys. I am new in oracle database.my database is in no archive mode i want to take backup through RMAN . rman target sys/oracle backup database; but fail to backup. please see error ORA -19602: cannot backup or copy active file in noarchivelog mod
-
Aperture may need "rebuilding" but is stuck in "repair" mode
I'm trying to open an aperture library that is stored on an external hard drive. Initially, I got a message saying something to the effect that repeated forced closures could indicate the library needs repairing, and then I was given three options fo