Include Activation Error
Dear Experts,
I have a very small question.
I created a program which runs very much fine. But now I want that program to be changed as an include and use it in another program.
So, I created an include in the other program and copied the whole executable program into the include. (Deleting the report stmt.)
But for some reason it is giving me the error at the time of activation.
It says.
"Incorrect nesting Before the statement Form the structure introduced by the if must be concluded by endif."
There is no IF that is open before the form. I'm not sure why this error is coming.
The error line it is showing is just at the line of first Form (Form-Endform).
When I check for syntax it is just giving no errors. Except statement not accessible, because it is an include. so no worries here.
so can some one please guide me if there is some thing else I need to do before coping the code from executable to include.
Thanks
-Amit
>
Suhas Saha wrote:
> This is foolish of me. Thank God, weekend's coming :-P
We all learn...
I use includes only for organising code - not for modularisation or reuse. (There are some exceptions, but they're few and far between).
A lot of people misunderstand the use of includes. For example, if they see
IF condition.
INCLUDE a.
ELSE.
INCLUDE b.
ENDIF.
they think that include a is only included if the condition is met. But both includes are *always" included.
Think about the above if include a held
* Do some stuff
ENDIF.
IF some other condition.
* Do some more stuff
That would be syntactically perfectly valid. And extremely confusing...
Similar Messages
-
Plz help include activation error
Hi experts
plz help me getting this error
when i activate include getting this error
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
plz help me and tel me hw to rectify it.hi anit,
do one thing..go to SE80 --> enter program name --> and right click on the program name > click on activate> this will activate the include....
hope this will work out...
please rewards points in case usefull...
regards,
prashant -
0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
PrabhakarHi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0STORNO Reversal Indicator.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO promotion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Valuation class.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Document Date.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE StockType.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Stock Categories.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Posting date in the document.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Company Code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Application component.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE movement Type (Inventory Management).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Relevance to Stock.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Sales Value in Local currency.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: Sales Value in Local currency.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Valuation Type.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW: Transaction Key.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Batch number.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Reason for Goods Movement.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Business Area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Cost Center.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Sold-to Party.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Storage Location.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Storage Bin.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Storage Type.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Vendor.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Document Number.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Base Unit of Measure.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Document Year.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Debit/Credit Indicator.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Local currency.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Plant.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Number of activities.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Controlling Area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Document Line Number.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Amount in local currency.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0QUANT_B Quantity in base units of Measure.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Structured Article.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET movement Type is Return.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatically Completed Component.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
RT_SASTST TYPE /BI0/OIRT_SASTST,
InfoObject: 0COORDER order number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
RMA_LNK TYPE /BI0/OIRMA_LNK,
InfoObject: 0RMA_RFLG RMA Relevance Flag.
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
InfoObject: 0RTHFEES Stock Transfer Fees.
RTHFEES TYPE /BI0/OIRTHFEES,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0STORNO Stornokennzeichen.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO Aktion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Bewertungsklasse.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Belegdatum.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Buchungskreis.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Bewertungsart.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Grund für die Warenbewegung.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Geschäftsbereich.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Kostenstelle.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Auftraggeber.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Lagerplatz.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Lagertyp.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Belegnummer.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Belegjahr.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Geschäftsjahresvariante.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Kostenrechnungskreis.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Betrag in Hauswährung.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0COORDER Auftragsnummer.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Strukturierter Artikel.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
RT_SASTST TYPE /BI0/OIRT_SASTST,
Field: RECORD.
RECORD TYPE RSARECORD, END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Änderungslauf ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Satztyp.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0CALDAY Kalendertag.
CALDAY TYPE /BI0/OICALDAY,
InfoObject: 0CALMONTH Kalenderjahr / Monat.
CALMONTH TYPE /BI0/OICALMONTH,
InfoObject: 0CALWEEK Kalenderjahr / Woche.
CALWEEK TYPE /BI0/OICALWEEK,
InfoObject: 0CALYEAR Kalenderjahr.
CALYEAR TYPE /BI0/OICALYEAR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0GN_VENDOR Lieferant.
GN_VENDOR TYPE /BI0/OIGN_VENDOR,
InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
RECVS_VAL TYPE /BI0/OIRECVS_VAL,
InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
ISSVS_VAL TYPE /BI0/OIISSVS_VAL,
InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
ISSBLOSTCK TYPE /BI0/OIISSBLOSTCK,
InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
ISSCNSSTCK TYPE /BI0/OIISSCNSSTCK,
InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
ISSQMSTCK TYPE /BI0/OIISSQMSTCK,
InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
ISSTRANSST TYPE /BI0/OIISSTRANSST,
InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
RECBLOSTCK TYPE /BI0/OIRECBLOSTCK,
InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
RECCNSSTCK TYPE /BI0/OIRECCNSSTCK,
InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
RECQMSTCK TYPE /BI0/OIRECQMSTCK,
InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
RECTRANSST TYPE /BI0/OIRECTRANSST,
InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
ISSSCRP TYPE /BI0/OIISSSCRP,
InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
ISSVALSCRP TYPE /BI0/OIISSVALSCRP,
InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
RECTOTSTCK TYPE /BI0/OIRECTOTSTCK,
InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
ISSTOTSTCK TYPE /BI0/OIISSTOTSTCK,
InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
ISSVALSTCK TYPE /BI0/OIISSVALSTCK,
InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
RECVALSTCK TYPE /BI0/OIRECVALSTCK,
InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
VENCONCON TYPE /BI0/OIVENCONCON,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
Field: RECORD Nummer des Datensatzes.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_9,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_9.
TYPES:
BEGIN OF tys_SC_1__RULE_10,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_10.
TYPES:
BEGIN OF tys_SC_1__RULE_11,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_11.
TYPES:
BEGIN OF tys_SC_1__RULE_12,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_12.
TYPES:
BEGIN OF tys_SC_1__RULE_13,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_13.
TYPES:
BEGIN OF tys_SC_1__RULE_15,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_15.
TYPES:
BEGIN OF tys_SC_1__RULE_19,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_19.
TYPES:
BEGIN OF tys_SC_1__RULE_20,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_20.
TYPES:
BEGIN OF tys_SC_1__RULE_21,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_21.
TYPES:
BEGIN OF tys_SC_1__RULE_22,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_22.
TYPES:
BEGIN OF tys_SC_1__RULE_25,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_25.
TYPES:
BEGIN OF tys_SC_1__RULE_31,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_31.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_38.
TYPES:
BEGIN OF tys_SC_1__RULE_39,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_39.
TYPES:
BEGIN OF tys_SC_1__RULE_40,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_40.
TYPES:
BEGIN OF tys_SC_1__RULE_41,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_41.
TYPES:
BEGIN OF tys_SC_1__RULE_42,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_42.
TYPES:
BEGIN OF tys_SC_1__RULE_43,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_43.
TYPES:
BEGIN OF tys_SC_1__RULE_51,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-stockcat EQ 'V' OR
DATA_PACKAGE-stocktype EQ 'V'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
FORM routine_0012
USING
COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
RESULT TYPE tys_TG_1_full-ISSCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0012
FORM routine_0014
USING
COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
RESULT TYPE tys_TG_1_full-RECCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0014
FORM routine_0041
USING
COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
RESULT TYPE tys_TG_1_full-GN_VENDOR
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
PERFORM gn_get_global_key TABLES MONITOR
USING COMM_STRUCTURE-gn_r3_ssy
g_c_bwbeoty_r3vendor
COMM_STRUCTURE-vendor
RECORD_NO
RECORD_ALL
CHANGING RESULT
ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM. "routine_0041
FORM routine_0010
USING
COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
RESULT TYPE tys_TG_1_full-ISSVS_VAL
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106 -
HTTP Communication and View activation error
hi all,
We are using CRM WebUI. We have Product Master screens. In developement environment everything works fine. whee we migrated it to consolidation env i am getting following error.
Not able to understand this error. I get the HTTP Communication error ot the product search page and the Target view activation error when in product creation screen.
Please help!!
Cannot display view MainWindow
An exception occurred during the internal HTTP communication Exception Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text: HTTP answer has status 404
Additional Info: Business Server Page (BSP) Error
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 113
An exception occurred during the activation of target view OverviewMaterial.MainWindow for the navigation
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View OverviewMaterial.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162Hello,
a HTTP error of 404 means NOT FOUND.
Maybe you can have a look in the TX SICF if the BSP component is activated. Just search for the service = BSP application name.
cheers Carsten -
Activation Error: Could not complete the iTunes... (help!)
Activation Error: "Could not complete the iTunes Store request. The store may be busy. Check your Internet connection or try again later"
Ok that is the error I get every time I set my new iPhone in the dock.
Details:
I bought the 8GB iPhone at the Kenwood Mall in Cincinnati OH, brought it home installed version 7.3 of iTunes, plugged in the dock and the iPhone, I went through the activation process and after agreeing to all the terms and licenses, the iPhone said "activated," but iTunes was still trying to connect to AT&T for something and eventually timed out. I remove the iPhone and it seems to sync and all features seem to work fine including making and receiving calls. BUT... everytime I place the iPhone in the dock, I get the above error. I click OK and every works fine. This happens everytime I place the iPhone in dock. How do I get rid of it??? Is there still something else that needs to be done on my account. BTW, my Internet is working fine, as I am typing this message via my Internet connection in IE on apple's site.
Thanks
Dell XPS Gen-2 Windows XP Pro 1GB Mem, SP2I bought the 8GB model, only had a 45 minute wait in line at ATT store. Performed activation via iTunes over 10 hours ago with porting of old T-mobile number. Still receiving message that activation is not completed. Called ATT and after 3 transfers, 35 minute hold times and then a recorded message that "due to extremely high call volumes" we will not be able to answer your call" it then proceeds to disconnect you. Finally kept trying and talked with ATT rep. in portability and they confirmed my porting has been approved but that my account still shows iPhone not registered. They then provided 877-800-3701 for problems with iPhone activation. After speaking with this representative, he would not work with me until I provided Web Order #. I told him that I purchased the phone in person at store, so he said that I would need to contact the store to obtain this number and without this number they could not verify that I had the phone and therefore it couldn't be activated. I called the store and left message. A store rep. called me back and told me that I would need to contact that same 877 number as they could not support me. ***!! To make matters worse, my old phone is now been ported and deactivated so I am phone-less and have a iPhone sitting in the dock that is completely useless. I am very disgusted at this point and don't know what to do. I was not expecting such an awful customer experience with an Apple product. Anyone have any thoughts? I drove by the AT&T store and there is a huge line of buyers, so I am not sure what to do at this point.
-
Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?
You have to restore your phone. To do this turn off your phone and disconnect it from your pc or mac. You then have to plug in the usb part of your sychronize cable into your pc or mac. Open itunes. Now press and hold on the home button on your iphone and plug the cable into it while still holding down the home button. Your iphone will now be in recovery mode and on itunes you will see the option that says restore. Click on that and your phone will be restored to factory settings. If you backed up your itunes all your apps will be downloaded back on to your phone. Including all your contacts and text messages. It took me a couple of tries to restore my phone when this happened so if it doesnt work the first time do it again. Took me two tries. This video will help you out. http://www.youtube.com/watch?v=Jzyy4puapig
-
Data element was activated (error in the dependencies)
Hello Friends,
We had released some TR yesterday to move to Quality and this was not moved successfully and in the TR logs I found the following message. Not sure what to do...request if some has encountered similar situation to give their feedback.
We had similar problem 2 days ago with another TR failing for the same reasons for another Data element...both are mentioned below...
We have adjusted the table in SE14 also but still the same. In development box we do not have any issues everything is active.
We have also regenerated the table maintenance also.
Following objects not activated/deleted or activated/deleted w. warning:
Table YAR_CN_BS_ACT could not be activated
(E- Nametab for table YAR_CN_BS_ACT cannot be generated )
Data Element ZLINE was activated (error in the dependencies)
Data Element ZZSERIAL was activated (error in the dependencies)
Following objects not activated/deleted or activated/deleted w. warning:
Table YAR_CN_GAAP_AREA could not be activated
(E- Nametab for table YAR_CN_GAAP_AREA cannot be generated )
Data Element ZZDES was activated (error in the dependencies)Ramesh,
When you transport a custom object, you need to make available other dependent custom objects for that object in the target system, means that when you transport a custom table you need to take all custom domains, data elements also in the TR if they are not already existing in the target system.....
Pls check that in your respective TRs, do you have data elements ZLINE, ZZSERIAL also....same for ZZDES...., Also include their domains if they are custom. Now, to remove this error, create a new TR and include all these custom data elements in it and transport to Quality. After that re-import your erroneous transports in Quality with help of basis.
BR,
Diwakar -
Nokia music is giving,activation error whenbtrying...
I am,getting activation error when trying to download music from,nokia,mix application
I tried,everything including resetting,phone, reinstalling,nokia mix app, using,different,email but no,luck
it used to work,before but once I used this email,id on a different Lumia,phone for music app and then when,I tried the,same,email id on this phone..getting error
any help?Hi rajk123,
Welcome to the forum!
Please provide us more details about the issue:
1. For which phone model is this?
2. Where are you located? Are you using Nokia Music + or Nokia Music Unlimited?
3. Where did you buy the new phone? Did you purchase it from the same region or country where the 1st Lumia was bought? Was it bought brand new, or second hand?
4. Is this the 1st Nokia Music account that you're going to register on the phone?
Note that the Nokia Music service works with 1 Nokia account per device IMEI. Only the 1st Nokia account that was activated with the phone's IMEI will work for the Nokia Music subscription.
Hope to hear feedback from you soon. -
I am getting an activation error when trying to sign in to FAceTime
I am getting an activation error when trying to sign in to FAceTime
me too after upgrading into lion..
-
My iPod Touch says it needs to be activated. I go to activate it using wifi and it comes up with Activation Error: this device is not registered as part of the iPod Developer Program. I'm not a memeber of that. I'm not even an developer, I'm 14. My iPod has worked normally for months now. Then I go to connect it to iTunes to reset it (I have checked and iI have the latest version) The computer recognises the iPod is connected Tand it charges but nothing appears up on iunes. It worked fine yesterday
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!
See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page] -
When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.
What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages -
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh...... -
DSO Activation Error - While Installing BI Content
HI Friend,
First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found 80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des
Maybe you are looking for
-
I prefer to use the List View in the Finder but I find one aspect of this interface particularly annoying. That is, if an item is highlighted (as it usually is) and one needs to scroll down or up to locate another item, the Finder keeps returning the
-
I have disabled/removed it from the add-ons, restored firefox as my home page, uninstalled it from my computer and my searches are still being controlled by bing with unwanted ads and it shows up beside the address bar. Embarrassing, but this all sta
-
Warranty not registered by retailer
Hello, I have seven T61s I purchased from CDW with 3 year EasyServ extended service agreements. One of the laptops died and won't power on or charge, even with a known good ac and battery. Unfortunately when I call I am told my warranty has expired.
-
HELP! what does it mean to authroize your computer
hello i have some games and tv shows that my friends gave to me on y i pod video and then i want to put them on my i tunes. what do i do? transfer purcheses from My ( My Ipod) thn if i do then it says that i need to authorize my computer. what does t
-
I am trying to create a wizard based application. I have set up View Objects as nested View Object using View Links in application module, for 3 levels. The wizard style checkbox is checked at the top level The 2nd level are divided into 4 regions. L