Include BLANK OPTION for an attribute dropdownlist in tx: COMM_ATTRSET

Hello experts,
I would like to add a BLANK OPTION for an attribute dropdownlist, I have tried to add a space character in "Value Range" but the systems give me an error " Enter a fixed value".
How I can include a blank option for an attribute dropdownlist????
Thanks for your help.
Best Regards.

Hi,
Can you let me know why would you need a blank attribute. What I want to know is that what business requirement is that going to serve.
Regards,
Deepak

Similar Messages

Windows 7 upgrade: discs will include the option for a 32 to 64-bit upgrade via a clean install?

I would like to know whether the Lenovo Windows 7 upgrade discs will include the option for a 32 to 64-bit upgrade via a clean install? I called Mentor today and was told the answer is no, but I was hoping someone here could tell me differently.
If "no" is truly the answer, I would like to voice my complaint: The upgrade discs from Microsoft (i.e. the retail upgrade discs) include both the 32 and 64-bit versions, so I don't completely understand why Lenovo's upgrade program doesn't offer the same thing. I purchased my T500 in August, and back then Vista Ultimate 64 was not offered, so I chose Vista Ultimate 32 thinking that I could later upgrade to Windows 7 Ultimate 64. This assumption was based off of the info. on Microsoft's website indicating that all upgrades would contain the 32 and 64-bit versions. I even customized my computer with 4 gigs of RAM thinking that I could take advantage of the extra gig once I installed Windows 7 64.
I don't understand what Lenovo or Mentor Media have to gain by restricting a 32 to 64-bit install. I voiced this opinion to Mentor Media over the phone, who responded by saying that I should be happy since I am receiving a "free" upgrade. I don't think this is an accurate assessment for two reasons: (1) I had to pay $17.03 for shipping, and I still haven't received the upgrade and (2) The total cost of my computer was almost $3,000, and the purchase was made a mere few weeks before Windows 7 was released. $3,000 is a lot of money. I waited for the details of the Windows 7 Upgrade Program to be announced BEFORE purchasing my machine. When I finally bought my computer I accounted Windows 7 into the price I was paying. In addition, when I bought this computer I did so expecting good customer service as a given. Not providing a 64-bit upgrade without a rational explanation as to why does not qualify as appropriate customer service.
As most of you know, 4 gigs of RAM is useless with a 32-bit OS. Also, NOW Lenovo is building new T500s with the option of having Windows 7 Ultimate 64 (why wasn't Vista Ultimate 64 offered when I bought my computer???).  And the price for choosing Windows 7 Ultimate 32 is EQUAL to the price for choosing Windows 7 Ultimate 64, which proves that there is no cost difference. I just want to know what Lenovo has to gain by denying customers a 64-bit upgrade? There would really be no additional cost since as I mentioned before, Microsoft's retail upgrade includes the 32 and 64-bit OS on one disc. If anything I would think that it's costing Lenovo money to strip the 64-bit install from the upgrade discs.
Can anyone please address my problems? Do you think there is anyone at Lenovo I could contact to voice my opinions? I have been a loyal Thinkpad customer for over 5 years now, and I expect better from Lenovo. Thank you for reading!
moderator note: core question add to title, as stated in the forum rules and it will help others too answer your questions.

Daventry wrote:
Is there any way to request a 64-bit OEM? Why should Lenovo care whether I want a 32-bit or 64-bit as long as it's the same edition (Ultimate edition)?
if your system shipped with a 32-bit version of vista then you will be sent 32-bit windows 7 upgrade media.   the reason for this is two-fold.
first, because this is upgrade media, it's impossible to install a 64-bit version of windows over a 32-bit version.   doing so would require a clean installation and upgrade media simply won't allow this.   this is the case with retail media, too.   if you had 32-bit vista installed and wanted to upgrade it to 64-bit using retail media, you'd have to wipe your system or set up a dual-boot.
second, the COA (certificate of authenticity) on the bottom of your system is for vista.   because of this, your new license is of an upgrade from vista to 7.   this is how microsoft licenses it and it is their policy, not lenovo's.   microsoft's policy with OEMs is that you must install vista first, then upgrade to 7 (unless, of course, you purchased your system native with 7 on or after the 22nd).   since your original lenovo preload is of a 32-bit OS, the issue becomes circular and you'll have to refer again to the first reason.
i understand your frustration and wish this stuff were made easier for everyone.   it's repetative reading post after post of people with 4GB installed who don't understand the limitations of a 32-bit environment. i wish both manufacturers and users switched to 64-bit OSes sooner. the same thing happened when the industry went from 16-bit windows 3.11 to 32-bit windows NT4/95 and limitations went from 16KB all the way up to 4GB (which, in 1995, no one thought we'd ever exceed).   the difference is that people were complaining on BBSes over 14.4k modems instead of on GUI-based forums using broadband connections.   times sure have changed.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

How to include the option for people to download adobe reader in an email campaign?

We need to attach some terms & conditions as a PDF in our mails (sending to a few thousand people), but would like to include an option to download adobe reader to read the PDF if they haven't already got one.
Is this a simple 'link to download page' or is there a widget/code or something that already exists for this? Just to make it quick & simple for email readers
Many thanks in advance!
Kathleen

Icons and web logo guidelines | Adobe

How to include zoom option for images and video in adobe captivate5?

I am developing an elearning software with captivate 5 which has images and video.
I want to include an option to be able to zoom the images and video if clicked on the particular area.
It should zoom any part of the image when clicked on it during run time and go back to original size when clicked again.
How can I do this?

1. I try with two images: The thumbnail y the Big Image Zoom image Detail.
2. I Use Dinamic Images
3. check this tip

How do I let Apple know they need to include an option for controlling the insertion point cursor in system preferences?

As described above.
I have spent far too much time investigating this issue! All I would like to do is have the insertion point cursor (the 'I' shaped text thing) not dissapear when navigating text in a word document with the arrow keys.
Some forums say it's an apllication issue, i.e. microsoft, others say you used to be able to do it in older versions of mac os'.
This isn't a problem for Mac programmes. Obviously it is an issue when Microsoft programmes cross over to Mac. If the computer was a PC then I could customise the blinking rate, turn it on or off etc under the control panel options. With a Mac running MS Office I have not got this option.
So how do I go about telling Apple of my displeasure? So hopefully for future editions of OS or Office for Mac this very minor but completely infuriating problem gets ironed out?
Cheers x

Thank you Ralph n Kurt, very quick off the mark boys, well done
Just checking in to inform you that today, after putting up with the issue for over a year, it has sorted itself out, MIRACLE! I don't know how but I've got a fully trackable insertion point when I navigate with my arrow keys!!
Do you think it's the big-wigs (because I complained to both Mac n MS) tweaking my computer behind the secenes? and if so which one would've done it? My money's on the geniusii.
Either way I am well chuffed and thanks again!
x

Blank template for report--Urgent!!

How to make or include blank template for report?

you can go to
Navigator > Applications > Shared Components > User Interface Templates
and create a unstructured template ,In that It's upto you what all you wish to add as a template .Create a blank template say
Template name = "Blank Template" and then while creating the report you can use the same "Blank Template" .I hope it helps.

Why doesn't the customer support menu-driven system offer an "opt-out" option for cases where none of the available options meets the customer's need?

I have called customer support several times to get problems with my service plan corrected. None of the menu-driven options meets my needs, but the system does not offer a way to connect to a live rep. The only way to get to a live rep is to hit the "invalid selection" O key several times. Good customer service would include an "opt-out" choice.

I'm sorry to learn that our phone system does not include an option for your specific concerns Windy1040! I can address all Verizon Wireless issues! How can I help you?
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?

Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry

Options for Displaying Reference Attribute in AdvancedTable Record

Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank you

If UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly.

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Please include a "Save for Photoshop" option

Yes, I meant that. Yes, I'm posting in the right category.
After asking for another feature, mirror layers, and many people started to defend Smart Objects as if they were the solution to everything, I realized that there's another feature mising.
There are many issues brought by the marketing department, like over-inflating a PSD file with ALL the smart objects rasterized data to prevent PSD having to process them all at opening, without which the file could take more seconds (minutes?) to open, but eats up your hard drive, making impossible to deliver a file other than by FTP (http / php servers have limits), making smart objects not-that-smart… (you have many copies of the same thing which makes those layers reproducible by re-applying the effects back at opening, and you think you are saving space…)
And… guess what? "Make the file compatible…" (or so) checkbox at saving time WON'T FIX IT.
So, my feature request is:
Wel need a new checkbox like "DISCARD ANY OTHER COMPATIBILITY THAT WOULD BLOW MY FILE OFF RATIONAL LIMITS JUST FOR YOU TO SHOW OFF YOUR APP IS FAST". So the file would only include USABLE, NEEDED data, rather than MARKETING, SHOW OFF data.
It could be a new export option called SAVE FOR PHOTOSHOP.
Yes, "SAVE FOR PHOTOSHOP" in Photoshop.
Innovative, isn't it?
Thanks.

To be honest a file of 200mg or 300mg in not a monster
You're right. Not one, but hundreds make a monster. Version-1, Version-2, Version-1a…
Again, There's no bigger laptop than my Unibody 17" i7… and Layouts is not the only thing I have in there. BUT I'm not a printer, and printers won't travel with their mega files.
May be you need a bigger suitcase, or you don't go mobile
I never had compaint before when I was a pre-press man, but now that web ate print, there should definitely be an option for discarding all that data. I don't like to be pushed to buy higher technology. I KNOW it can be done, but marketing says we have to buy online space, mobile me, to use PSD online… so seems the bigger the files the better.
I BET they'll ULTRA compress the files and they'll XCREW YOU on loading time once they own the server, the ISP, and all that extra bandwidth appear in THEIR bill instead of ours, hehe.
So you can work on any document at a much lower resolution than you need for its output.
Yeah, I know what you mean. I was the first one in yell "Let's work all our files at 75DPI with SO and let's make them bigger before going to press.

TS4006 Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

"Include when checking for new mail" option not working

Hi,
I have 2 email accounts set up on mail, but I only want 1 of them to pull down mail (the other will only be used for sending). For the account I don't want to get mail I deselect the box "include when checking for new mail".
However, Mail still pulls down messages from that account. When I put in the correct server settings for the incoming, it pulls all of my mail (in this case gmail), and when I put in bad settings (as a way of avoiding getting the mail) I get an annoying error message.
Does anyone know of a way to make that function of Mail work?

Hi feuerstein.
How have you set up the Gmail account in Mail (POP, IMAP), and under which circumstances does Mail check for new mail on that account? More info, please.
BTW, Mail doesn’t automatically check when launched every account if Include when automatically checking for new mail has been turned OFF. That happens with IMAP accounts only (and only if they’re “online”), not with POP accounts, but it isn’t clear at all whether that’s what you’re talking about...

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Change blank option setting on selectItems

I have a selectOneRadio component with selectItems bound to an entity attribute - see the code below. At the time when I set up the selectItems through the GUI, I was asked whether I wanted it to generate a blank option. I chose yes then. Now I would like to get rid of that blank option on the selectItems. Can anyone tell me how to do that? Where is that setting stored?
<tr:selectOneRadio value="#{bindings.description.inputValue}"
label="#{bindings.description.label}"
binding="#{backing_eef_expense.selectOneRadio1}"
id="selectOneRadio1">
<f:selectItems value="#{bindings.description.items}"
binding="#{backing_eef_expense.selectItems1}"
id="selectItems1"/>
</tr:selectOneRadio>
Thank you in advance.
Sophia

Hi Navaneeth,
Thank you for your reply. No, there isn't a list like that in my pageDef.xml. I thought it should be in that file too and that was the first thing I searched for. Any other ideas?
Here is my pageDef.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.56.60" id="expensePageDef" Package="eef">
<parameters/>
<executables>
<variableIterator id="variables" Refresh="ifNeeded">
<variable Type="java.lang.String" Name="setCurrentRowWithKey_rowKey"
IsQueriable="false"/>
</variableIterator>
<methodIterator Binds="TExpenses.result" DataControl="SessionEJBLocal"
RangeSize="25" BeanClass="com.dairynet.eef.TExpenses"
id="TExpensesIterator" Refresh="ifNeeded"/>
<iterator Binds="root" RangeSize="25" DataControl="SessionEJBLocal"
id="SessionEJBLocalIterator" Refresh="ifNeeded"/>
<accessorIterator MasterBinding="SessionEJBLocalIterator"
Binds="TReceiptFindAll" RangeSize="-1"
DataControl="SessionEJBLocal"
BeanClass="com.dairynet.eef.TReceipt"
id="TReceiptFindAllIterator" Refresh="ifNeeded"/>
</executables>
<bindings>
<list IterBinding="TExpensesIterator" id="description" DTSupportsMRU="false"
StaticList="false" ListIter="TReceiptFindAllIterator"
NullValueFlag="start" NullValueId="description_null">
<AttrNames>
<Item Value="receiptId"/>
</AttrNames>
<ListAttrNames>
<Item Value="receiptId"/>
</ListAttrNames>
<ListDisplayAttrNames>
<Item Value="description"/>
</ListDisplayAttrNames>
</list>
</bindings>
</pageDefinition>
Thanks,
Sophia
Edited by: SophiaM on Jan 27, 2011 4:23 PM
Edited by: SophiaM on Jan 28, 2011 11:36 AM

Include BLANK OPTION for an attribute dropdownlist in tx: COMM_ATTRSET

Similar Messages

Maybe you are looking for