Include CD text is grayed out on one computer but not other?

I am having a strange issue with Itunes on different computers. I have Itunes on both my home computer and my computer at work. On my work computer which is an HP, when I go to preferences>Advanced>Burning> I can select “include CD text”, and everything works fine. However, on my home computer running the same version of ITunes, that option is grayed out and I can’t select it. I have checked some settings, but can’t seem to figure out why I can’t select it on my home computer. Please Help
HP Windows XP

Ok, I finally got a chance to burn a CD using the Nero express program. Although it was a two step process; 1. burn songs to CD and 2. save tracks to CD, the song names were recognized by the Sure Thing label program, but not the ITunes program. I brought the CD to work, and put it in the computer and the ITunes program did not find the CD text there either. I would assume that the DVD/CD writer IS capable of writing the CD text to the audio CD since the tracks are recognizable by both the Nero program and the Sure Thing label program. Now to figure out why I can’t select “include CD text” in the ITunes preferences on that computer. Oh, I also looked up the model of the work computer disk drive (HP DVD Writer 640I) that allowes the selection of "include CD text" and the home computer disk drive (HP DVD writer 740I) that has this option grayed out. The specs are almost identical with the possible improvements to the later model 740I. I don't know, weird stuff.

Similar Messages

AEBS drops connection on one computer but not other

I have no idea what is going on. I have read a few threads in the AEBSn forum about intermittent dropouts after a firmware update, but mine is an older AEBSb/g. The strange thing is that I have my iBook and my iMac side-by-side, and most of the time the iBook connects effortlessly to the Airport Network (and then the internet), while the iMac sits there scanning for a network and not discovering one. Sometimes I am able to connect to the network initially on the iMac, but then it suddenly drops to no bars of reception, and I can't get back online. Sometimes it will automatically join again, or sometimes not.
I have taken to having the iBook connected to the Airport, and then sharing its internet connection with the iMac through the ethernet so that I can get the iMac online. I needed to do this to use Software Update to see if there were some updates that might fix this problem, but to no avail.
Right now the iMac is online, with 2 bars in the airport, and the iBook is also connected with full strength. Sigh. I just don't understand. The iMac has been my main computer for many years, and has been connecting to the airport for the last couple of years without major incident.
I did use the iBook to configure the AEBS recently, as I needed to change the network from WPA2 to just plain WPA to allow the iBook to join the network. But I'm pretty sure that the intermittent connection on the iMac started before I did that. In fact, I think I used the iBook to configure the AEBS because I couldn't keep the iMac connected long enough to change anything.
This is the longest the iMac has been online in quite some time. I am also able to switch to an external disk and start up in OS X 10.3.9 on the iMac (I created this startup disk when I upgraded to 10.5). It seems to connect just fine to the network/internet. In fact, after I do that and switch back to 10.5, I seem to have more luck connecting again in 10.5. But still not full signal strength - it fluctuates between 2 and 4 bars.
Anyway, I thought I'd start a new thread on this because of my situation with the two computers. It seems to rule out interference, anyway.

I just want to clarify that when I say the iBook is connected to the Airport, I mean it has joined my network wirelessly.

Forms 10g runs well in one computer but not others

Dear gurus,
i have installed my application server forms and reports 10g and manage to connect forms using mozilla firefox web browser (IE failed - i guess this one is IE bugs) in my own computer and it works very well in my own computer.
Weird case is when i tried using other computers to load my forms with same browser settings, it will stuck at the web browser stated opening but nothing is open (grey page after i click ok on the oracle message saying installation successful).
i even tried on the newly reformatted and reinstall windows xp computer also will have the same symptom - stuck at grey page. The problem is, i do not receive any error message beside the grey page thats why not really sure what is wrong.
link:
http://servername.domain.com:7777/forms/frmservlet?form=filename.FMX
jinitiator version : 1.3.1.22
OS: Windows XP sp2
Browser: firefox 2.0
Pop up enabled
connected to 9i database
Does anyone can tell me what can be wrong and how do i solve this please??
Many thanks in advance

Hi Robin,
Looks fine to me - I saw episode 39 in the iTunes Store, and when I subscribed it started downloading episode 39.
Explanation: ummmmm.... internet weirdness?

Wireless shows up on one computer but not other!!

I have a MacBook Pro and for some reason no wireless networks show up. My roomate has a MacBook and the wireless shows up on that computer. Both computers can be in the same location and for some reason the internet will just now show up on my MacBook Pro!!! Please helppp this is very irritating!

Do you have Airport status icon in your menu bar? Is it on or off? Go to Sys Prefs > Network and authenticate ‑‑ what does it say about the status of Airport? Is it off or on? If on, click on Advanced. Under Airport tab, click on "+". Can you add a network? If not, go into Sys Profiler ( > about this mac > more info > Network > Airport Card. What does it say? "No information found" or does it give you info about your Airport Extreme card?

Songs playing on one computer, but not on others.

I use my iPod on three different computers (Home/Work/brand new laptop). I recently upgraded my iPod from original 80gb to new Classic 160gb. Before I purchased my new iPod, I transferred my whole library (about 50gb)from my iPod onto my new laptop(using transfer software). Then when I purchased my new iPod I synced the whole library to the iPod. The problem is that when ever I connect my iPod to my work or home PC some songs have an exclamation mark next to them (and they don't play). So when I went to replace the "exclamation marked" songs from the laptop (where the whole library exist), I had NO exclamation marks. So my question is why do the songs play on one computer but not the others? Please help!

It looks alot like the problem we had when we couldn't resolve the CUPS server FQDN. But the desktop and laptop are on the same subnet and use the same DNS servers. I can ping the CUPS server by FQDN from the command prompt on both
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:46,319 [0x00001394] WARN LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::RegisterWithNextProxy[2852] - Order of routing attempt: :5060(TCP)>. Attempting to register to
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiSinks - (WABIMSG_REGSTATE6) ********* CUPS (@) (slot 0) REGISTER STATE: Registering... *********
2010-02-11 14:57:49,787 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:49,787 [0x000016f4] ERROR LCWabiSinks - (WABIMSG_REGSTATE11) ********* CUPS (@) (slot 0) REGISTER STATE: FAILED!! code=503, reason=Service Unavailable *********
2010-02-11 14:57:49,787 [0x00001394] ERROR LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::onFailure[3561] - Failed to register! error-code: 503, msg: 'Service Unavailable'. Retry in 20 second(s).
I swapped out the username for and the domain with to protect the innocent. Or maybe the guilty; we will see. From the command prompt I can ping BC-IPT-UPS. and I get a response from the CUPS at the correct IP address.

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Why is home sharing showing up on one computer but not the other?

My homesharing is showing up on one computer but not the other! They are both under the same account and both iTunes are up to date. Unfortunatally, of course its showing up on the computer that I dont need it on. Please help me! Thanks!

It could be a firewall issue. Try disabling the firewall and see if that helps.

"printer is offline" appears on one computer but not the other (both windows 7)

printer is offline" appears on one computer but not the other (both windows 7)

This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver.

Removing email accounts on one computer but not wanting to remove on all computers on the same network.

I have a MacPro desktop and a Macbook Pro. I would like to remove my apple email account from the Macbook Pro but do not want to take the chance of losing the same account on my MacPro desktop. They use the same internet connection and network. Can I just remove the apple email account on the Macbook Pro? Both computers are using OSX 10.9.5.

I'm assuming the account is IMAP. You can safely remove any IMAP account and all data will be left on the server for other devices.
When you check to disable, the account will simply gray out and no longer connect.

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

Store credit shows up on one computer, but not another

Happy Easter everyone,
I was wondering why my store credit shows up on one authorized computer, but not another? Is there a way to fix this? Or will I just have to make my purchases on that computer?
Thanks
Jason

An account's balance should show wherever you use the account (computer's iTunes, and in the App Store, iTunes store and iBookstore on iOS devices). Have you tried logging out and back into the account on the computer that it's not showing : Store > Sign Out menu option, that will then change to a Store > Sign In option (my balance has sometimes been slow to update on my computers/devices)

Beta user on one computer but not on another

I have Beta version 16.0 on one computer on one computer but on another computer its regular version 15.0.1. Bookmarks are not synching. How do i get both versions the same?

Do you have [[Firefox Sync - Take your bookmarks, tabs and personal information with you|Firefox Sync]] setup? If so and it is giving you problems, please check [[Firefox Sync troubleshooting and tips]].
Please tell us if this helped!

Photoshop CS6 preferences and scrubby zoom are grayed out on Cintiq 13HD but not on my laptop?

So basically I got a new Cintiq 13HD and apart from finding out that there's screen rotating issues for lefties, there's also some Photoshop issues.
Scrubby zoom is my favorite zooming tool, and when I opened Photoshop on the Cintiq the option was grayed out. I Google this and it tells me to go to preferences but that's grayed out too. It works perfectly fine and not grayed out on my laptop however, so I'm not sure what I can do about this.
This may well be a Wacom problem and not an Adobe one, but I said I'd ask here.

Hi Emily
We don't have as many Cintiq users on this forum as you might think, and most of use would be guessing when trying to think, so you might do better asking on the Wacom Cintiq forum However, my own experiences using the Wacom forums have not been favourable.
So I'll start with that guessing process, and my first guess is that Photoshop is only installed on the laptop, and that the Cintiq has to be connected to it? If that is the case, you need to tell us what the laptop is, and its operating system and version.
I understand that the much more expensive Cintiq Companion operates as a stand alone device, but this is not relevant to your problem.
You probably need to make sure your laptop's video card driver is fully up to date from the card makers website, and that our Cintiq has the most up to date driver.
BTW A very quick Google tells me that Mac systems with Mavericks have had issues with your tablet.
Wacom Forum - Wacom Europe GmbH • View forum - Cintiq / PL
Good luck

Text Track font is missing on one computer, but not on another

I brought in a text track into my QT movie, then saved the whole thing as "self-contained". The font that I set for the text track (with QT descriptor) is Verdana. The problem is that on one computer, the text shows up fine, yet on another laptop, the text shows up as a bunch of boxes instead of characters.
I know that laptop has Verdana as a font on the system, so I am not sure what's going on.
has anyone had that problem before?
Thanks!

I use a lot of text tracks in my "movies". Since mine are made on a Mac I also use Mac "specific" fonts for some of them. When viewed on a PC the Mac only font always defaults to an appropriate substitute and no one is the wiser.
If there is an issue with a PC only font it should also revert to a similar substitute.
Other issues could be a corrupt font or even duplicates or a conflict.
You may want to experiment a bit with some text track QT files.
Create your plain text (.txt) file and import into QuickTime.
Export it (with text descriptors) back to a text file so you can edit the font. Make a few versions and test the file onvarious computers (Mac and PC).
More info:
http://www.apple.com/quicktime/tutorials/textdescriptors.html

Premiere Crashes Every Time I open one file but not others???

So today I had just finished making a video which I am supposed to be entering in a competition with deadline tomorrow but just after I saved and tried to make the viewer bigger so that I could watch the whole thing back, Premiere Elements 10 crashed.
Each time it gives me this message:
[/PerforceRoot/PRE10/premiere/elements/mac/main/MediaCore/MediaLayer/VideoRenderer/Make/Ma c/../../Src/RenderFrameRequest.cpp-310]
This is what it comes up with in the problems box after Premiere Elements 'quits unexpectedly'
Process:         Adobe Premiere Elements [8298]
Path:            /Applications/Adobe Premiere Elements.app/Contents/MacOS/Adobe Premiere Elements
Identifier:      com.adobe.Adobe Premiere Elements.framework
Version:         20110902.B343.280460 (10.0)
Code Type:       X86 (Native)
Parent Process: launchd [95]
Date/Time:       2013-05-30 22:34:06.990 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          297710 sec
Crashes Since Last Report:           13
Per-App Interval Since Last Report: 708033 sec
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      451A2E34-BE87-4EC9-9D8A-B0147DA5DD85
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
What does this mean and how do I fix it?????

Charlotte Hampson
I am going to assume that you are working in NTSC.
In order to determine the present situation we need to gather information about the project set up and its computer environment. It is good that you did not encounter problems until now, but there are certain guidelines to avoid the pitfall surprises.
1. When you open your Premiere Elements 10 Mac, you need to set a project preset so that it matches the properties of your source media (or as close as you can come to them) so that the program is directed to set up the correct space in the Edit Mode Monitor from which to edit. If you do nothing but OK your way pass the New Project dialog, you end up with the default project preset, NTSC DV Standard which represents 720 x 480 4:3. That is fine if that matches the frame size and other properties of your .mp4 and .mov video.
2. When I was asking about computer resources, I was referring to installed and available RAM and free hard drive space? Your computer may not be optimized. If you have been working with a lot of projects, you may have pile ups of preview files and conformed audio in the Adobe Folder/Premiere Elements/10 (or whatever its counterpart is in a Mac setup). There are also conformed video files that may have to be cleaned out. See Edit Menu/Preferences/Media and the .mcdb files.
Is scaling in the Edit Mode Monitor the only project action that results in the program crashing?
Since you have said that everything was fine until this one particular project, I am suspecting compromised computer resources, problem with your Timeline content, and such, rather than a patch for something that never worked before.
I am not sure where it would be in the Mac directory, but see if you can find the Adobe Premiere Elements Prefs file and delete it. In Windows 7 or 8 64 bit, it is found:
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
10.0
and in the 10.0 Folder is the Adobe Premiere Elements Prefs file that you delete.
Let us see if any of the above has any impact on your situation.
Thanks.
ATR

Include CD text is grayed out on one computer but not other?

Similar Messages

Maybe you are looking for