Include changes of PH in transport request.

Hi Experts,
Able to create transport request which is available in TCode SCAL to transport PH/ Calendar. How can i include only my changes in the transport request.
for eg. if i have created new holiday calendar "NI" and new holidays id's. How can i include in transport request only my calendar NI and holiday id's.
Kindly guide.
Regards,
M Bharath

As far as I know, all the tables pertaining to Statutory Holidays, Holiday Calendars and Business/Factory Calendars will be included in the Workbench Transport.
It may be possible to delete some of the tables from your transport, but I would not recommend it.
Don't forget that your changes will not have an impact unless you re-generate the Work Schedules using the NI Calendar, and that will be a separate Customizing Transport.

Similar Messages

Change the owner of transport request

Hi,
I want to change the owner of transport request. How can i do this ? Plz. Help.
Regards
Sandeep

Hi
Go to SE10, Enter the transport request number and press F5 to change the owner as per your req.
Regards
S.Senthil

How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created ?

Dear Abapers,
I request the Abapers kindly reply for this blog
I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ?
I checked in SE03 transaction the transport request was there. But I want to retrieve the existing transport request which is not moved to Quality?
Is it possible to retrieve the existing transport request in development which is not moved to quality ?
Like how we retrieving the programs using versions in development server, In the same way I want to retrieve the sapscript layout in development server ?
Thanks & Regards
Muzeebur Rahiman.S

Hi,
There is no version management for SapScript or Smartforms .
When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
cheers
Jānis

Posting Key Field Status changes - unable to generate Transport request

Dear All,
I did posting key field status change from suppress to optional ( P.Key 24).
However I am unable to generate a transport request.
Please share your inputs
Thanks
Sanjai

Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
Regards
Abhay

ChaRM: read categorization of change docs based on transport request ID

Hi There,
We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
Ádám

In the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
If you need my complete code, drop me a mail.
Thanks,
Ádám

While doing changes in GRR2 no transport request is generated( report paint

Hi Gurus,
        when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
              Trial balance......... liabilities          from               to
                                                             100000           199999 (allready existing)
                                                              600000           690000 (new range while doing this,not generated transport request)
please do needful,
Regards,
Rmesh.

Hi,
Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
Regards,
Eli

How can we change the "Unclassified" in transport request???

Hi All,
how can we change the "Unclassified" in Sub Request Description while creating a new transport request
Thanks,
Andy

Hello Roger,
Try to open your TR and in the Request/Task menu at the top, select Change task type.
Hope it helps.

How to change description of released transport request

Hi experts,
The transport requests tasks and are released and owner of TR also released, now need to modify description.
Is their any possible way to do it, because transport is not moved out of the system.
Thanks,
Pavan

Hi
There is one way to achieve this.But this s not advisable.
1.) Got o FM 'TRINT_CHECK_REQUEST_CHANGEABLE'
At the line number 111 IF is_request_header-trstatus CA sctsc_states_released, put the break point.
1.) Double click the released request which you want to change the description.
2.) your EDIT option will be disabled. Just type '/h' in the tcpode area and press enter, your debugging will switched on.
3.) Then Press ENTER again, it will open the debugger screen, in the variable change the SY_UCOMM field to 'WB_DISP_EDIT_TOGGLE' . Then press F8.
4.) your control will be in the FM 'TRINT_CHECK_REQUEST_CHANGEABLE' line number 111. Try to skip this IF condition by using debug technique.
5,) Now you can change the description.Now you cant save this as Save button is disabled.Just press back button, you will get the message for save the changes.Just save it. Done.
Thanks and Regards,
Senthil Kumar Anantham.

How to change Client of a Transport Request?

Hi friends,
I am trying to Change the clien of a Transport Request in se01 but the field is disabled.. Is there any way to change the Client of a Transport Request?
Pls Help me.
Regards
Venkatesh.S

Why you want to change the client ?
I assume, you are not talking about changing the traget system client but the client of the source system TR ie for ex 100 or 120.
If the Development Server has two clients say 100 (Configuration) and 120 (Development and Unit Test) then for configuration changes Functionals will get the TR created in 100 where as we developers get the TR created in 120.
For Development,if you get a workbench TR in 100 client but trying to change the program in 120,then while saving the changes in the TR it will not let you save your changes because the TR is created in 100 but you are trying to use that TR to capture the changes that you are doing in 120.
To my knowledge we can't get THIS client changed,instead we need to get a new TR in the client say 120 where the workbench changes are supposed to be done.
K,Kiran

Change object from one transport request to another

Hi,
I have a requirement wherein i need to change the object from one transport request to another. The thing is that i have saved
one in one transport request and when i am trying to transport it , it is not allowing me to transport as this transport request
contains some inactive object. I have also tried to delete that object from this transport request and put in another one
but when i tried to do that i was only allowing me to create sub task within the same request .
Kindly suggest me
Thanks
Parag

Hi,
you can either just delete the object from the object item list of the first transport request (just click away all warnings and hints). Then put it into a new request, lock it and transport it. You might ned to overtake the responsibility for the first request but with the appropriate authorization this should be no issue.
Other solution is using a transport of copies. This will tell you the object is locked in another request when you release it but still allow to transport it.
In all solutions you have to be sure that transporting the object without all other stuff in the request is possible as the objects are independent from each other. Otherwise you will not be able to import the request in the destination system.
Rgds.
Roman

How to include .txt (notepad file) into Transport Request?

Hello,
We are configuring the SolMan Service Desk (SPS15) and the IMG says that we need to activate BC sets and we did that.
There is a note 898614 (Service Desk-BC sets) states that for the installation we need to Copy the contents of the file Piecelist_Service_Desk_Initial.txt to the transport
request.
Can anyone help me the procedure how do we go about this activity and if i do this on the Development Client can i move this to the Producation too.
Thanks and Regards,
Rao
Edited by: Rao on Jul 28, 2008 3:56 PM

Hi,
You just need to open the text file and copy the entries into the transport request.
Below is the procedure on how to copy the entries into a transport request.
Goto trx SE10 --> Create a transport request --> Double click on the request --> selcts tab 'objects' and paste the entries there.
Pl reward points if it helps.
Thanks,
Naga

Including logical path into my transport request!!

hi i have defined a logical filepath for my report from where it will read the files ....
can i include this file path in to my TR...which i have created using transaction FILE if so how should i include..
thanks.

HI..
When you log into the FILE transaction it says cross client table.. So that means it is a customising change..
You need to create a customising request and include the change in that request. this is to move it from one system to another.
that is dev to quality for eg.
but to get it in all clients in dev you dont have to do anyting. since it is cross client you will get it by creating in one client itself.
regards
ansari

Including objects in a transporte request

Dear Gurus,
I have two questions:
1) I tried to include objects manually in a transport request because I had to delete them from another request where they did not belong. I copied in a notepad the Program Id, Object Type and Object name in order to use thes values in a new request created for this purpose. But when I went to the new task and put the Program ID, Object Type and Object Name and pressed 'Enter', the line recently filled with these values disappears. I have not found a way to register the required object in this way.
2) Then I tried to do the following thing: I went to the customizing (formulas and requirements) and modified the corresponding objects in order to trigger a suggestion of a new Transport Request. I saved my changes in the new requets. Then I went to SE10 in order to check the request task, but I found that the program Id and Object Type are totally different to what I have copied in the notepad before deleting object from task... Is this ok, or did I do something wrong?
Thank you very much for your answer in advance,
Regards
Dominik Ley
Chile

Hi,
Please check the below link for changing the objects in the sytem other then from its original system.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/5b/2f7faca70911d2850b0000e8a57770/frameset.htm
You can try this.
Use a different userid and try to save the same object in the system. I hope it should ask for the transport request and the task wll be of REPAIR type.
Regards,
Naveen

Change of Source client in transport request

Hi Gurus,
I want to change source client of transport request
Since I want to transport request between clients of same server.
I did it using scc1
But when I want to make any changes to form which was included in that request it is saying
Request/task DEVK***** has invalid source client XXX
I am trying this in YYY client
Please provide solution
Thanks in advance for your efforts

Yogesh,
Does both the clients allow development in the server? Generally it should not be the case.
Does the client still exists in the server?
Here is a thread with replies for such an error message.
Re: regarding Client change for transport request
Check it,it may give you some lead.
K.Kiran.

Including InfoPackages in Transport Requests

I want to include an InfoPackage in a transport request so that I can transport it from development to test. However, when I open the InfoPackage and try to include it I receive an error message informing me that Deltas have already been loaded. This is correct, but why would it stop me including the InfoPackage in a transport request?
Does anybody know what I can do about this?

Hi Stuart,
I guess you are trying to transport the "init" load infipackage. If so then change the load option to "full load" and then transport. You can later change the option in QA.
Bye
Dinesh

Include changes of PH in transport request.

Similar Messages

Maybe you are looking for