Include command in SapScript to fill in a local field

Dear all,
Normally when we are using the INCLUDE SAPscript command, the system is printing the information retrieved.
My question is, if someone of you know, whether is possible to put the information retrieved into a local field, defined as DEFINE &wa_localfield& := include &tdname& object vbbk ...
Many thanks in advance !
Rgds., Anton

No, that is not possible using the INCLUDE statement.
Welcome to SDN!
Regards,
Rich Heilman

Similar Messages

Reg INCLUDE command in SAPscript

Hi Folks,
   Can anybody tell me is it possible to give tab in INCLUDE command in SAPscripts.
   What I mean is I want to display standard text after few spaces.
   Thanks in Advance
   Punit

Hi Punit,
      You cannot give tabs for INCLUDE command. On the other hand you can read the text in your print program using READ_TEXT function module. You can modify the text using SAVE_TEXT and send it to the SAPScript for output.
With Regards,
Nelson

Include command in Sapscript

Dear all,
I've added an include command in the main window of my sapscript in order to display text object in my forms. THe thing is that I would like to be able to position the free text not on the left of the windows but in the middle of it. But it seems that I can't use tab strip with the include command.
/: ,,,,include &VBDPA-TDNAME& OBJECT VBBP ID 0002 Language en does not work for instance.
Any idea?
Regards.
NC.

Hi,
Do one thing I am not sure that this will serve your purpose.
Create one new window and place it on your main window where you want to print that text.
In that created window INCLUDE your text object and make that window as CENTER justification in paragraph format.
Here you will face one problem with size of the window.
That is if your TEXT exceeds your window width or height then the TEXT will be truncated.
So you need to take care of it.
Try with this i hope it will solve your issue.
Thanks.

What is use of Read-Text command in Sapscript plz replay

What is use of Read-Text command in Sapscript plz replay
i m geting problem with read-text command in sapscript as will as
perform and endperform .

Hi Majid,
It's a function module to read the texts from a text file. Generally it is used to retrieve the long texts.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ´
ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Br,
laxmi.

Indent /tab position for text from INCLUDE texts in SAPscript

Hi, ABAP colleagues!
Need your help on this sapscript problem: How to align texts taken from "INCLUDE TEXT" in SAPscript, according to tab defined in Paragraph Format?
Or, how to control tab positions for texts which were extracted from INCLUDE text commands in SAPscript?
I defined a paragraph format with tab stop at 8 CH so that with 2 commas (,,) my text will be displayed there. However it always appears to the left (e.g. 1st column) and not indented at the proper column for description/text (e.g. which is in second column).
Pls help, bec a different heading and information is not acceptable to client for the Thailand characters.
Above is the description of the problem. Below are some technical details.
For specific example, I am editing Zversion of standard sap MM form MEDRUCK Window Main - Text Element Item Text.
BG ,,&TTXIT-TDTEXT&
/: INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID&
/: NEW-PARAGRAPH BG
So far, tried these approaches:
PARAGRAPH
NEW-PARAGRAPH
LANGUAGE '2'
THANGSAN font
Any ideas?
Thank you so much in advance for all your help. Our project team will really appreciate it. May the Lord bless you as we go through our SAP work!
Sincerely,
Celeste

Hello Caleste,
Please let me know what settings you have done to solve this issue.
Help me with steps for Spool Request/Print settings.
Regards!!
Surya

Importance of language in include command

Hi All,
wat is the importance of language in INCLUDE command? in sapscript
i mean wat happens if we ignore/omit language in INCLUDE command?
for example i have 3 item texts
z003 - FR
z007 - IT
z008 - BE
these languages may be changed by the user to any language as per his choice,,,,so we cannot pass hard-code values for lanague in INCLUDE statement..
Thanks
John

John,
Adding to the points mentioned by our frnds above, if you really want the form output to be displayed in different languages, its SE63 T-code which helps in translation.
You can create the standard texts in SO10 with teh same name but in different languages. In translation, in the appropriate version you can call the text in the desired language.
IT works as you require. Try it out and get back for any other issues.
Regards
Priya

Returncode from include command in sap scipt

HI,
If I include a textelemt with the /: include command I can not identify if that textelement was available or not. So I would like to check a returncode after my include. Is there any way to do so?
Because I try to do following as final version:
include header_customer_no
if include fail
include header_material_no
if include fail
include header_default.
Any hints how I can do so?
Thanks
Jens

Hi,
I'm not sure if you can check for this in the SAPScript itself, however, what you could do (if the print program is a Z program) is to add logic to determine if the text exists in table STXH, using the text name, object, id and language. Based on the results of the select, you could move on to the next STXH until you either get a match or not. Then you could set global variables to hold the object, id, name and language and pass those to a single INCLUDE statement in the SAPScript element.
If your print program is not a Z program then you can achieve the same effect by using the /: PERFORM statement to call a subroutine in a Z program object and use this to determine and return the object, id and name.
Hope this makes sense.
Regards, Andy

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??

I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.

About BOX control command in SAPScript.

Hi,
I am using the BOX control command in SapScript.
Is it possible to assign the values of Xpos and Ypos dynamicalliy.
In BOX XPOS 16 CH WIDTH 0 MM HEIGHT 18 MM FRAME 10 TW,
i want to assign the values at runtime, instead of
xpos 16 , something like Xpos Var, where var contain the value of xposition.

Hi,
We cant give the dynamic value in runtime . It should be static.
Regards,
Saran

Include command line args in executable jar?

Hello all,
I'm trying to package up some software which takes 2 command line args to run (for example, java -jar prog.jar FooBar 3.14159). I'm using a utility called Jar2Exe to wrap it up into an exe (still needs JRE to run, but it's nicer packaging for distribution).
My question is, how can I included command line arguments in the jar? Or can I? Or, are there any exe-wrapping utilities out there that will allow me to accomplish this?
Thanks,
-Thok

Thok wrote:
Hello all,
I'm trying to package up some software which takes 2 command line args to run (for example, java -jar prog.jar FooBar 3.14159). I'm using a utility called Jar2Exe to wrap it up into an exe (still needs JRE to run, but it's nicer packaging for distribution).
My question is, how can I included command line arguments in the jar? Or can I? Or, are there any exe-wrapping utilities out there that will allow me to accomplish this?
Thanks,
-ThokOkay, did some more research... It appears you can't specify command line options in a jar, but if you package it into an exe, you can--depending on what utility you use to wrap it, that is. I downloaded a free one (Launch4j) and it does the trick.
-Thok

QR Codes Why does adobe not include a State area to fill in.

QR Codes Creation: Why does adobe indesign not include a State area to fill in.

Make a feature request at the link below. With InDesign CC, updates can happen more often:
Adobe - Feature Request/Bug Report Form

SUMMING command in SAPScript

Hello gurus,
I am trying to use the SUMMING command in SAPScript to output a total on each page of a transfer order.
According to the sap help, I need to declare the summing total variable within the print program using the TABLES statement, I'm trying to total LTAP-VSOLA so should I be declaring a table of this type? ANd if so, shouldn't I be using a DATA statement for this? I'm confused as to what the help actually means?
Has anyone used this statement before and have an example that I can see?
Thanks,
Ruby

Try like:
/: DEFINE &TOT_PRICE&
/: SUMMING &KOMVD-KBERT& INTO &TOT_PRICE&
or
/: DEFINE &SUM& TYPE NETWR and write in the loop
/ &SUM& = &SUM& + &BSEG-WRBTR&
and use this SUM field
normally I would prefer to calculate this kind of stuff in the print program. But I guess you are using the original SAP program.
Amit.

ADDRESS Command in SAPScript

Dear all,
I'm using ADDRESS ~ ENDADDRESS command in SAPScript. I pass street name to STREET as follow
NAME name1 name2 name3 name4
STREET &LFA1-STRAS&
With the above, my street can be displayed out correctly.
But i faced problem when i have street2 street3 and street4, like below:
NAME name1 name2 name3 name4
STREET &LFA1-STRAS& , &ADRC-STR_SUPPL1& , &ADRC-STR_SUPPL2& , &ADRC-STR_SUPPL3&
With above, nothing printed for street.
Could you please point me out where did i code wrong?
Or we can not pass street2/3/4 to STREET?
Thank you.

Hi,
Just Refer this:
https://forums.sdn.sap.com/click.jspa?searchID=12447471&messageID=2301405
Check the below link for details on Text Elements
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802e91454211d189710000e8322d00/content.htm
Regards,
Shiva Kumar

Looking for a command to check the filling level of the ASIC netwflow table on Cat3850

Hello.
I am searching for a command to check the filling level of the flexible netflow table in the ASIC of the Cat3850.
There is a show command on the FNF Cache which shows me any entry numbers but this values is confusing me.
The Cat3850 is able to have 16K egress and 8K ingress FNF table entries according to the FNF guide.
But the show command gives me a value of >33k.
Does anyone have an explanation on this?
How can I check the real filling Level of the FNF table in the ASIC?
Thank you very much
Karl
show flow monitor Solarwinds-OUT cache
Cache type:                               Normal (Platform cache)
Cache size:                              Unknown
Current entries:                           33256
Flows added:                              626755
Flows aged:                               560235
    - Active timeout      (    60 secs)     410932
    - Inactive timeout    (    15 secs)     149303

myle wrote:I don't want a solution with GUI because my laptop is 6 years old.
I completely agree with all the above and I only use mutt. But I use mutt because I *prefer* cli apps.
If you're just going with cli because you don't think your computer can handle gui apps ... then I don't think you've given the lightweight gui apps a fair shake.
Yes, evolution and thunderbird would suck on an old computer (but IMHO they suck on a new one too![1]).
Claws (or/aka sylpheed) is a nice little mail app that should work nicely on any computer that is running X. I'm sure there are other lightweight gui mail apps to.
Again, I love mutt. But I don't think having an old computer is the reason to favor mutt over a good gui app if you would otherwise prefer the latter.
[1]: Not meant as a flame, rather an expression of my preference for software that does one thing and does it well. These tools both, while they may be well written, try to do so much that I have never been pleased with the outcome.
Last edited by Trilby (2012-08-14 11:57:35)

Firefox 7 is forcing me to fill out a form field that isn't required. I've used FF on this site for years but when I upgraded to FF7 it no longer works. IE it works fine.

Firefox 7 is forcing me to fill out a form field that isn't required. I've used FF on this site for years but when I upgraded to FF7 it no longer works. IE it works fine.

It's our internal applicant tracking systems (resume database). It works fine in IE and all previous verisons of FF but in FF 7 a bubble icon pops up stating that "Please fill out this field".
The field is not required but states "Require all of these words" if you to run a search based on those parameters.

Include command in SapScript to fill in a local field

Similar Messages

Maybe you are looking for