Include custom infotype 9101 in IDOC
We have configured infotype 9101 and want to include it in an IDOC (HRMD_A07) to be passed to Novell identity management. The appropriate entries have been made in T777D but identity management does not recognize it. I have been told it is not in the correct format however it is very similar to infotype 1013 and it looks to me to be formatted the same.
I am new to IDOCs and would appreciate any suggestions.
Thank you in advance!
Pat
You have to run RPUMS40CCI for all your Custom Infotypes to generatte the missing includes.
~Suresh
Similar Messages
-
Need to transfer Custom infotype data using IDOCs
Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
SarikaYou'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718 -
Who's who Infoset : Adding a custom infotype
Dear Experts,
I am in need of your valuable input on Who's who.
Can we include custom infotype (9000) fields to the infoset (by coping into a custom infoset)?
What is configuration needs to be done on portal side to enable the additional fields.
I know to add / remove the fields which are already provided ( from infotype 0,1,2,105 and 32)
Awaiting your response.
Cheers
JayHi,
Yes you can surely include your custom Infotypes in the Infoset for Who's Who.
There is no need for doing any Java customization unless you want to have a hyperlink and other kind of things for the additional fields.
If you want to show some content from the custom infotype and have a hyperlink to take you to some other location or application in that case you need to do the Java changes.
In all other cases change in the config will suffice.
In the ECC system go to t.code SPRO
Navigate to Personnel Management - Employee Self-Service - Service-Specific Settings - Address book - Who's Who - Who's Who (ESS) : Selection and Output - select the country and replace the standard Infoset with your custom infoset.
Hope this helps.
Cheers-
Pramod -
Custom Infotypes and Change History
HR Gurus,
I am being told that with custom infotypes, we can not track change history.
THe scenario I have is that I need to be ableto capture Address Changes (Address Line 1, Address Line 2, City, State and Zip) and send a Delta for the changed address.
In my unique situation, I have been told that if Address Line 2 is deleted, than the change histiry can not capture the fact that it was deleted and all change history regarding its prior existnace will be deleted if the Address Line2 is removed.
I am not entirely sure=, but I wanted to ask you guys anyway if I woukd be able to track Change history.
-FerozHi Feroz,
Do not believe everything you hear. You can view changed and deleted information from custom infotypes and fields.
First, I am not sure why you need a custom infotype for addresses when IT0006 is available to you. You can more easily create a custom subtype if the supplied ones do not meet your needs.
But for any PA infotype including custom infotypes, you can use the Logged Changes to infotype Data report (RPUAUD00). You have to set up the infotype to be logged in the IMG: Personnel Management --> Personnel Administration --> Tools --> Revision --> Set Up Change Document. In the first section, you list the infotypes you want to track changes for including your custom infotype. In the second step you list the fields you want to track. "*" means any change to any field. And in the third step you indicate whether the information is kept as a long term or short term document.
When you run the report, you can enter the infotype and period you want and the first list will be all changes to that infotype. Select one to view the details and you will see each field listed with the original data and the new data. If a field is deleted, it will appear blank in the new area, but you can still see the old entry in the previous data column.
Also, if an individual deletes a entry in an infotype by using Copy and enters in a new start date, the old record will be delimited, but still be available for viewing. Also, every infotype records who made changes and the date of the change.
Paul -
How can I include Customer Hierarchy in Customer master IDoc -DEBMAS06 ?
Hi,
I am generating Customer master IDoc using basic message type DEBMAS06. But when I include customer hierarchy data while creating customer master, it is not included in any of the segments. The segment containing the data from KNVH is not included in standard.
How do I include this hierarchy data in the IDoc? If I create a segment, under which basic segment should it be included and how to update the data in the segment?
Can anybody help?
Points assured.
Best Regards,
RajendraHi
You can use LSMW :-
1) Create a project , sub project and an object.
2) execute it from 1 st screen to enter the object.
3) You will find proces steps.
4) In Maintain Object Attributes choose Program Name RFBIDE00.
or I-DOC or the way you want the input to be.
5) You can proceed from there following the instruction.. -
IDOC :: how to send data from Custom Infotype in SAP HR to third party
Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
ZTALENT Talent Management
5 E1PLOGI Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP HR: Transported Infotypes and Subtypes for an Object
ZPUSER User base Data File
ZPERSON Personal Information File Segment
ZPOST Position File
ZOPE Overall Performance
ZPWORK Outside Work Experience
ZPEDUC Education Details of Employee
E1P0000 HR: HR Master Record Infotype 0000 (Actions)
E1P0001 HR: HR Master Record Infotype 0001 (Org. Assignment)
E1P0002 HR: HR Master Record Infotype 0002 (Personal Data)
E1P0016 HR Master Record: Infotype 0016 (Contract Elements)
E1P0022 HR Master Record: Infotype 0022 (Education)
E1P0023 HR Master Record: Infotype 0023 (Other/Previous Employers)
E1P0041 HR Master Record: Infotype 0041 (Date Specifications)
E1P0105 HR: HR Master Record Infotype 0105 (Communications)
ZE1P9020
ZPLANG Language Details
ZACTION Actions Changes
Regards,
KrishnaHello Shankar,
Technically TEMSE files are read by calling the following 3 function modules in sequence,
1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
2) RSTS_READ : read the object
3) RSTS_CLOSE: close the object
Regards,
Rajesh -
ALE/IDOC-How to create Change Pointers for Custom Infotype
Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
SarikaHi Sarika,
How did you solve this issue? We are also facing a similar problem, it will be helpful if you could explain how you found out the solution.
Thanks
Anu. -
How do i generate the idoc for the custom infotype?
Hi Experts,
I have a requirement to create the custom infotype and generate the idoc for the custom infotype
whenever the user change or crate the data by PA30, PA40 transaction .
so please give some help to write a logic for generate the idoc?
Thanks in advance.
VenkatI have just found out from the Archives, it is not possible to generate a formula line (trend line) in Numbers_08.
I am currently upgrading to Numbers_09. -
%_HR99XX (99XX - custome infotype number) include not found
The following syntax error occurred in program "AQW8PERSONALE===FERIE_ROL_GEN=
" in include "AQW8PERSONALE===FERIE_ROL_GEN= " in "INCLUDE report "%_HR9105" not found
where 9105 is custom infotype .this problem is comming in upgrade version of the system ie from 4.7 to ecc 6.0.Thank you, Yes Its updating in 2006....but only sy-datum and username are updating .....Leave quota i am changing from 4 to 3 . its not updating, but showing in screen when i used dialog = 2. Also the same screen appearing 3 times and when i am trying to click on save button its ending with an error 'internal maximum number of sessions reached' , then screen automatically closing by itself.
-
Error while editing an automaticlly populated record of a custom infotype
hi,
a query in HR ABAP.
i have created a custom Infotype to store the CTC details of an employee. this custom IT needs to get the records auto populated, when they are created in Infotype 0008.
i have used the exit. EXIT_SAPFP50M_002 inside which an include program is written :ZXPADU02
using this, the records made to get create automatically in the custom IT.
but when we try to modify or delete those records thru the tcode PA30,
it does not allow to do so and throws a standard error message. as below.
Specified subtype is invalid
Message no. PG088
please help me out to fix this issue.the exact point of the std error is,
i do the folowing steps.
1)_ for auto creating a record in custom IT Pa**** , i goto transaction, PA30, create record in IT 0008 with a basic Pay., click on save.
on saving , the EXIT_SAPFP50M_002 is called where i ve written a Z inlcude Program, which inserts the record in custom IT PA****. this is successful.
2) when i try to change or delete the same record which i ve created as above, through the Tcode PA30 for custom IT, PA
****, i get the error.
hope the problem is clearly mentioned -
Change Pointers not being created for HR-PA Custom Infotype
Problem Description:
We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
detected for all infotypes except 9001. For 9001, the change pointer is not created.
The following are the current configuration details:
IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
custom segment zhr_seg
Change pointers are switched on.
Change pointers switched on for message Type HRMD_A.
IDOC configuration created for Port / Process code etc.
Maintenance of view T777D - Added ZHR_SEG.
If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated. -
HR LDB PNP and customer infotypes in 640
Hello,
I encountered the following problem during an upgrade from 4.6C to SAP ERP Central Component 5.0. When using logical database PNP and customer infotypes the syntax check produces the following syntax error:
- INCLUDE report "%_HR9731" not found
I have added an example program below. Prerequisite for this program is that the cutomer infotype 9731 exists in the system.
Has anyone experienced this problem before? And if so, is there a solution? I can program some workarounds, but I prefer a solution, which does not involve changing my code.
Regards,
Marcel
REPORT ZTESTINFOTYPES.
tables: pernr.
infotypes: 0000,
0001,
0002,
9731 mode n.
start-of-selection.
get pernr.
write / p0002-pernr.
end-of-selection.Hi all,
"You will have to run report RPUMS40CCI (XPRA for generation of
infotype include) for existing customer-defined infotypes.
If you have not run this report then please do so.
The report RPU40CCI creates the infotype include %_HRnnnn (nnnn =
infotype number) and the additional data structure Pnnnn_AF (nnnn =
infotype number) for the given infotype, provided that the correspondin parameter ("generate infotype include" or "generate additional data
structure") are set on the selection screen. If the parameter "maintain only T77ID" is set, no infotype include or additional data structure is maintained, only those entered in table T77ID."
Best Regards
Silvio Galery -
Custom infotype in SAPHRActiveSync - supervisor field
Has anyone been successful in adding a custom infotype in the SAP HR ActiveSync adapter to get the values? I added it to the schema and did the mappings in the wofkflow, but its always returning null value. I need to add supervisor field and work address fields which are custom attributes that are being looked up in another table in SAP, thus no specific infotype for them. I read in the documentation that there are 6 infotypes supported (0000, 0001, 0002, 0006, 0105) but no mention of custom infotypes...anyone faced similar issue and what was the workaround? Should we just use a BAPI call to get the values? We're using IDM v8.0.
Any help is appreciated.. Thanks!Hi,
When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
Hope this helps.
Donnie -
Adding a text field in a custom infotype
Hi,
I have a custom infotype which deals with sickness data of the employee
My requirement is that the user will enter an explaianation for his sickness...etc. Thus I need to incorporate a text field in my infotype.
What I am planning is to give a button on the screen of infotype, so when user clicks it a text editor will open and and he can insert or update his sickness text data.
Please tell me how do i do that and also if there is any alternate better approach.
Regards,
Nehayou need to make a custom container on which you have to put editor
use class cl_gui_custom_container, cl_gui_text_editor, first define instances in top include then create objects. if you want this to be done when you click on any button then put this coding in the function code of that button.
aditya -
Adding field from Custom Infotype in Screen Header-PA30
Hi all,
Can we add the fields from custom infotype to the screen header in PA30? When I tried through Change Screen Modifications, I could not see the custom infotype in the Infotype column, so I could not select the required field.
Please guide.
Thanks in advance.Hi,
When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
Hope this helps.
Donnie
Maybe you are looking for
-
How do i set the timeout value?
I'm doing an insert...in the insert i have a trigger that fires a http put. when i'm doing a couple inserts at a time, it works fine. However if i try to insert about 50 at one time (within msecs of each other) then i get the following error: ORA-292
-
How can i write the code in xml publisher desktop
hi all How and where can i write the code in xml publisher desktop ??? shall i know how to write xml code or what ?? in which part can i write the code if i have more than one query ?
-
What parameters should i give in Global Definition or in code
Hi all, the below program is the sample code,was done by my col...and we getting output correctly in se38...but the same if i give in smartform...its not coming out in the print/output form..... in global definition...i've given as itab like tline. i
-
Hey everyone, Sorry for posting again, something is up with my thread and i cant reply in it. So I am reposting and adding this picture. This is the cable for the monitor that I want to hook up to my iMac. The model number once again is Gateway FPD 1
-
Using Modbus RTU in Labview 8.5 for Terminator Field I/O
We have on site Terminator: T1H-EBC100 Field I/O's and are trying to use Labview to control it. We currently use Labview with our NI Fieldpoint modules and RIO's. We have been trying to find a way to use LabView to control the Terminator Field I/O