Include external content when referred in internal content

I am hoping someone can point me the right directions for the following use case.
In our SharePoint site collection various pages are referring to external content (for example: an article page on msdn or wikipedia). Whenever the user is searching for information that can be found in the external content, I would like SharePoint search
to give a result of all internal pages that are referring to this external information.
Maybe the "link to document" contenttype is what I need to use, but I was hoping it is possible to configure my search crawl to follow links on internal pages referring to external pages for 1 level deep and add the external content to the search
index of the internal page to show up in the search result.
In general I am talking about internal aspx content pages and external html or pdf documents
(I hope this explaination is clear enough)

Hi,
Your explanation is quite clear about what you expect. As my understanding, the current search service in SharePoint cannot achieve your requirements. First, the SharePoint search engine limits search scope within the data sources defined in SharePoint search
service application. Considering the links in your internal pages might link to anywhere in internet, the external pages cannot always be able to be clawed by SharePoint. In addition, the OOTB index components don't support adding one content into the
index of another content.
In my point of view, the only possible way is to develop your own search service application, and deploy it to your SharePoint environment, but this is a very complex task.
Thanks,
Reken Liu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

How to include external files when building installer for a standalone executable?

Hi,
I was trying to build a stand alone executable from my Labview project and I was able to do it successfully. Now I would like to include a few external .txt files in the installer. Those .txt files have parameters/constants that will be used by the program, and my program needs to load/read them when running. For now I have to manually copy/paste them into the target machine, but I really hope the installer can do it automatically. I see there is a "data" folder in the installer, and that's where I hope those .txt files can be added into.
How can I do it? Can anyone give me some suggestions? Thanks!
Rgds
Harry
Solved!
Go to Solution.

Norbert,
I could not find "Add file" when right clicking the project. See attached image please. Under "Project" I do have a "Add to project" but there is no option for external files. I did not find "Source" location either.
What did i do wrong? Is there any version requirement here? I have a 2010 base version. Thanks for your help.
Rgds,
Harry

How to print a PDF form content when i have the content

Hi SAPGURUS,
I have an urgent requirement.
I have the content of a PDF form in raw format and it is saved in some repositry .Now How can i create a spool request and print the form.
I can use the function module FP_JOB_OPEN and then gat the dynamic function module name and then close it by FP_JOB_CLOSE .
But as i already have the PDF form content i need not create it again by calling the dynamic function module.And i can't do so because both applications are altogether separate from each other that is creation of the PDF form and printing it.
Could you help me in guiding the way to solve this problem.
Thanks in advance
Sanjeev

Hi Sanjeev,
I have currently the same issue, please have you solved it?
Thank you
Tomas

My old computer died just after I transferred iTunes via external HD. When I transferred the content from the HD to the new computer, most songs won't play. Message is "Can't identify source". Sharing was on in the old computer when it died.

My old computer died just after I transferred iTunes via external HD. When I transferred the content from the HD to the new computer, most songs won't play. Message is "Can't identify source". Sharing was on in the old computer when it died.

Is there no ANSWER TO THIS PROBLEM?

I can't transfer downloaded content from my macbook air to my external hdd, when i try to drag it into the hrd drive it wont go in how do i fix this ?

i can't transfer downloaded content from my macbook air to my external hdd, when i try to drag it into the hrd drive it wont go in how do i fix this ?

What format is the external HDD in? If it's NTFS (= proprietary Windows), then OS X can read it but not write.
Eventually copy all content from the drive to a safe place, the re-format. FAT32 is the format which both Windows and OS X can read and write.

Why does IBA not include the table of contents when exporting to PDF?

Why does IBA not include the table of contents when exporting in PDF? I can seee the TOC in iBooks Author but when I want to see what it looks like in a regular PDF, the TOC does not show up.

Strange question you ask here. Not sure why that is relevant to "why" IBA won't publish a table of contents in a PDF.
But since eyou asked, it's simple, I want to author some books in IBA and also see what they look like - completed - in PDF. Again, any suggestions as to a work around so I don't have to cut and paste back into Pages?

My itunes Library is on an External Hard Drive, but my internal hard drive crashed, I have to re-install windows XP--What do I do to re-associate my Library on the external drive and not wipe my iphone when I synch?

My ITunes Library is on an external hard drive, however, the internal hard drive on my laptop crashed, requireing a complete re-format and re-installation of Windows XP--When I re-install Itunes, what do I need to do to make sure I do not lose all of the content on the two iphones I have, and to re-associate the library with Itunes ( i know how to change the path) but I am fearful that somehow the library link will be broken since the old Itunes installation is gone, and who knows what else might go awry.
any help or advice is welcome.

You're Welcome...
This Link explains the correct way of putting iTunes onto an External Drive...
If you have have not done it this way that could explain a lot...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751

External Service Failure: There was no Content-Type header

We have developed a web service using WLW and deployed it to weblogic 8.1 (install from scratch), we manage to invoke the service successfully. However, when we deploy it to the weblogic 8.1 server installed through PeopleSoft PIA , we keep getting the 'External Service Failure: There was no Content-Type header' error.
Does anyone know what are the differences for the weblogic installed through PeopleSoft PIA or how we can get around the error? Thanks!

Hi Jerioon,
Which Master Page and Content Type did you use when you created a new page layout with Designer Manager?
Whether you could provide a screenshot about this issue.
In addition, here is an article about creating a page layout with Designer Manager, please take a look at:
http://www.learningsharepoint.com/2013/03/03/create-a-custom-page-layout-in-sharepoint-2013/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to fit frame to content when content contains anchored text box?

Hi there
I am creating a series of inline text frames within a text frame. Each of these inline frames contains text which includes an anchored text frame. If I tell my inline frames to fit to content they seem to ignore the anchored frames contained therein. Is there any way I can get them to consider the anchored frames they contain when they fit to content?
I tried checking the geometric bounds of my anchored frame before and after its parent frame has fitted to content. Even when there has been no change in position the bounds after fitting to content seem to give numbers way off. I thought I might be able to reset the geometric bounds of the containing frame manually if the anchored frame therein had moved with the fit frame to content.
Here is a snippet of my code:
var anchoredBounds = anchoredFrame.geometricBounds;
mainFrame.fit(FitOptions.FRAME_TO_CONTENT);
mainFrame.texts.item(0).recompose;
var newAnchoredBounds = anchoredFrame.geometricBounds;
alert(anchoredBounds[0] + "; " + newAnchoredBounds[0]);
So “mainFrame” is the text frame containing text and the anchored frame, “anchoredFrame”. “anchoredBounds[0]” seems to correlate with the top edge of the frame when I check it manually after the script has finished (when it hasn’t move with the fit to content). “newAnchorBounds[0]”, however, always gives numbers that are way off every time. Any ideas why this would be the case?
And most importantly, can anyone suggest how I can get my “mainFrame” to consider the “anchoredFrame” contained in it when it fits to content?
I’m using CS4 on a PC. Let me know if it would help to post more code, or if I haven’t explained myself clearly enough.

Is there any way I can get them to consider the anchored frames they contain when they fit to content?
@Graham – as long as ALL the anchored text frames are "inline" text frames,
mainFrame.fit(FitOptions.FRAME_TO_CONTENT);
should work as expected or at least sort of *.
Without calculating anything at all.
Just tested in InDesign CS5.5 (v7.5.3).
Could it be that CS4 will fail on that?
Of course, you can only rely on this, if the main text frame contains any "real" text at all. Not only the special characters representations of the "inline" text frames. In that case the fit() method will do nothing at all.
* it's debatable, if the fit() method yields desirable output.
It depends on your expectations.
See the following examples:
1. Case 1:
Text frame before fitting:
2. Case 1:
After fitting with the UI command, context menu: "fit frame to contents"
(note the gap between the last baseline of the text and the text frame; note also the new width)
Is that the result you would expect? I guess not.
3. Case 1:
After fitting programmatically with myTextframe.fit(FitOptions.FRAME_TO_CONTENT);
4. Case 2:
Before fitting
same text frame as in #1, but different height
5. Case 2:
After fitting with the UI command, context menu: "fit frame to contents"
A different width than in #2 and a gap at the bottom of the text frame!
Not the desired result, I'd say…
6. Case 2:
After fitting programmatically with myTextframe.fit(FitOptions.FRAME_TO_CONTENT);
Same result as in #3
So with scripting we could, at least, get consistent results.
Of course, you could get the same results in the UI, if you double-click on the bottom center control point…
Maybe it helps, if you are showing us some screen grabs:
1. Your starting point
2. The desired result
Uwe

Do I have to repackaged my content when my certificates expire?

No, the content does not have to be repackaged.
Flash Access has a feature where the license server will still vend licenses for any number of expired certs, as long as the content was packaged when the certificated was not expired. This is needed so that Trial/Eval customers don't have to repackage all their content when they move to production certs, or, when production certs lapse and new ones must be issued.
For more information, see "Handling certificate updates" on page 32: http://help.adobe.com/en_US/flashaccess/2.0/protecting_content.pdf

The only thing you can watch on AppleTV that ISNT in your iTunes library is photos. Everything else must be there.
I'm not sure why you remove things from iTunes after syncing with your iPod, but that shouldn't be necessary...
Your media does not have to "live" on your MBPro hard drive to be in your iTunes library. I highly recommend using an external drive to store everything and just use a "home" and "travel" iTunes library if needed to keep things separate. As it is, I use a single iTunes library and manually sync to my iPhone.

Thumbnails do not match video content when imported

My thumbnails do not match video content when imported. They assume the look of the first video imported into an event, while showing correct source content when skimmed through. Also, audio for every video clip I import is changed to that of the first clip imported in an event. Very awful to realize only when you've just imported every video you've made. Any thoughts?
Also, my source for clips is an external OneTouch drive, don't know if that plays into the import problem.

Is your Event source list visible on the bottom left of your screen? You should see all your events there.
There is a button at the extreme lower left of the imovie window which allows you to show or hide the event list. Make sure that it is in show position, so you can navigate to your other events.

ID CS5: How to include additional text into a table of contents and how to hide text from it?

I have the following problem:
1. I'd like to include additional Information in my table of contents which I don't want to appear in the text I refer to.
Example: I do have a picture with a caption saying:
picture 1: Blablabla.
And I want to have the source of the picture as additional information in the table of contents:
picture 1........Blablabla (source: thisandthat)........23
Still I don't want this additional content to disappear, as soon as I update the table of contents!
How can I achieve that?
2. And how can I have this the other way round?
Let's say I want the source in the caption, but not in the table of contents.
So the caption says:
picture1: Blablabla (source: thisandthat)
but the table of content says:
picture 1........Blablabla.....................23
I was trying to achieve this by two different praograph styles in the caption. One which would be listed, and one which wouldn't be listed, but this of course resulted in always having two paragraphs in the caption, which I'd like to avoid:
picture1: Blablabla
(source: thisandthat)
Any solution to this?
Best Regards,
Rainer Schwachsinn

Sorry, missed the second part of the question. I think the only way to do that is to use invisible "dummy" text of some sort, and if you're going to do it for some entries, you might as will do it for all.
One of the easiest ways is to put the text you want inthe TOC into an anchored frame attached to the actual heading in the text (so it moves along with it). Use a unique paragraph style for this text, and include this style, not the one applied to the headings inthe text, to make the TOC. I usually use a character color of red to make it satnd oout so I don't forget it's there, and the position on the page isn't really critical. Select the anchored frame, open the Attributes panel and make it non-printing. You'll see it in editing mode, the TOC will pick it up (as will variables, if required) but it will disappear on output.

My iphone 4s was stolen i have locked and set it up to erase content when the iphone is turned on, it has 'find my iphone' on it will i still be able to track it if it turns on?

My iphone 4s was stolen i have locked and set it up to erase content when the iphone is turned on, it has 'find my iphone' on it will i still be able to track it if it turns on? PLEASE HELP really want to find it

You're welcome.
Once again, the Find My iPhone app has no effect on this.
Find My iPhone must be enabled with your iCloud account settings on the iPhone.
Location Services must be enabled.
The iPhone must be connected to the internet via an available wi-fi network or via the carrier's cellular network.
If the iPhone is powered off, none of the Find My iPhone features can work, and the same if the thief or whoever has access to the iPhone has restored the iPhone with iTunes as a new iPhone on another computer.

Firefox is stumbling when pages with PDF content come up. how can i get my old version3.5.6 back?

Question
firefox is stumbling when pages with PDF content come up. how can i get my old version3.5.6 back?

Thanks for your response Cor el, I'll try that the next time it happens, it's completely random. One moment it functions normally then suddenly it changes its mind.
Restarting my pc usually brings it back to normal until next time.
One thing I've noticed, but not 100% sure there's a connection here.....I edit my websites online and log into cpanel which opens new pages in separate tabs, as it should do. It seems that this problem occurs when I'm logged into cpanel...if i'm logged in then open a new tab for regular browsing of other sites then all links on those sites also open in new tabs.
Ican't say for sure if it's always only happened when logged into cpanel, but certainly on the last 3 occasions.
At the moment it's behaving normally so much I can do to check your suggestions, but will try them the next time it occurs.
One other thing I forgot to mention too....since i've had the new firefox, I've noticed that when I log into yahoo and post comments, I often find myself having to log on for each new post. Everything was fine with old firefox and there have been no other changes to my pc .

My iPod Touch will not play through external speakers when it is docked. It only plays through it's internal speaker. All the other functions on the iPod can be controlled by the external speakers (volume,track, etc). How do I fix this?

My iPod Touch will not play through external speakers when it is docked. It only plays through it's internal speaker. All the other functions on the iPod can be controlled by the external speakers (volume,track, etc). How do I fix this?

I would try in oreder:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.

Include external content when referred in internal content

Similar Messages

Maybe you are looking for