Include extract structure in transport requst

hi,
im unable to include extract structure in transport requst ?
I have activated the MM related datasources 2lis_02_hdr in R/3 dev and assigned them to a workbench reqst.
i have noticed that there was no extrac structure in that transport request...
pls can anyone tell me how do i include extrac strc
thanks

Guys any updates on this. I'm also facing the same problem.
Thanks in advance,
Rash.

Similar Messages

Transport Extract Structure

Hi Guys,
I am unable to Transport the extract structure. I have created a Datamart and want to transport the required extract structure for the same. I am facing Transport failures errors since the extract structure does not include in the Transport.
The datasources and all related objects are included in the Transport but get an error relating to Extract structure.
I see these extract structure is the $TMP package and I am unable to include the same in the Transport.
1) Please let me know how do I include them in the Transport.
2) Would also want to know if we include the dataources in the Transport will that solve the purpose or should we include extract structures explicitly.
Please help me on this.
Thanks in advance.

This is a Datamart generated and I am facing extract structure error in my Transport after it is imported to the Quality environment. I have Transported the Datasource but the Extract structure for the same is not Transported.
I am aware of the $TMP package, I am unable to change the Package details please help me in which all ways we can try to include the object in the Transport.
I have tried editing the extract structure and also tried changing the Object Directory but unable to include in a Transport.
Please let me know what needs to be done.
Points will be alloted for sure.
Thanks

How to Transport Extract Structure and datasource

Hi all!
I had recently made enhancements to 0CO_PC_PCP_01 datasource.When I transported the datasource and the Extract structure, I noticed that only the append structure has been transported. The datasource has not been transported.
Could some one tell me how to collect the datasource and the Appended extract structure and transport them.
Thanks,
S.P

Hi Jaya,
I had already tried this already. When I selected the dtasource and selected the transport button. I got the message, action successfully executed. When I checked in SE09, I see no transport. Unless it asks me for a transport request, I will not see it in SE09, right.
~S.P

Transporting extended MC02M_0ITM extract structure in LO Cockpit

I have extended the extract structure via the maintenance screen for 2LIS_02_ITM to include BUKRS and KTWRT. However, when I transport this into PRD environment, the two fields were not appended into the extract structure. As a consequence, the user exit failed as reference to these 2 fields cannot be made. Any idea what's the problem in the transport ??
.APPEND
BUKRS
KTWRT
.INCLUDE

Hi Siew,
Welcome to SDN!!
In your transport make sure you had these:
1. datasource- Active
2. Extract structure
3. User exit program
4. Appended extract structure
Bye
Dinesh

Extract structure does not exist at the time of transport

HI ,
i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis is
Extract structure does not exist at the time of transport
Long text of error message:
Technical information about the message:
Message class....... "RD"
Number.............. 041
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
please provide the solution asap

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Transporting Extract Structures for Business Content Data Sources

Hi
We have added a new field to the 2lis_13_vditm data source and when i am trying to capture it in the transport, only the data source is getting captured and not the extract sturcture. When I go to the Object Entry Directory of the Extract Structure, it shows package as MCEX and person responsible as SAP. Should i need to change this and capture it in a transport or is it enough if i capture the data source alone
Thanks
Rashmi.

Hi,
If you transport the DS that should do it . The extract structure is standarad one and it would show as SAP, however you would have added the new filed using an append structure and if you go to the append structure and view the transport request you should be ble to see the transport request and your package in it.
P.S : if the Append structure is not under any transport req then check if it has already been transported
Cheers!!
Ashwin G

How can we assign Extract Structure of datasource to request to transport

Hi,
I was trying to transport datasource. But it ended with errors due to unavailability of extract structure. So plz guide me how I can assign Extract structure of datasource to request to transpport.
I tried to assign in RSA6 but here there is no option to extract structure to assing to request.

Hi,
Normally when you get the screen to select and hide the fileds and then save it, you will get the extract structure collected automaticaly in your TP request.
Hope it helps
Regards,
Srini

Extract Structure - '.Include' option

Dear Experts,
When clicked on the extract structure of the datasource, I noticed '.include' and '.append'. Could you please explain me when these appear. Please let me know each separately.
Kind Regards
Shanthi

Hi,
This has been discussed before in threads ...
INCLUDE:
Includes are used to group fields and insert them together in a table or structure.
An include program has two main functions:
It contains code which can be used by several different programs.
It helps you to modularize programs, which consist of many different logically related parts. Each of these parts is stored as a separate include program.
Include programs improve the readability of programs and make maintenance easier.
Include reports contain rolled out parts of reports. They are called by the main report, and can only be run in conjunction with the main report.
APPEND:
Append structures are used for enhancements that are not included in the standard. This includes special developments, country versions and adding customer fields to any tables or structures.
An append structure is a structure that is assigned to exactly one table or structure. There can be more than one append structure for a table or structure.
The following enhancements can be made to a table or structure TAB with an append structure:
Insert new fields in TAB,
Define foreign keys for fields of TAB that already exist,
Attach search helps to fields of TAB that already exist
you can check out these threads too
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=1419481
https://forums.sdn.sap.com/click.jspa?searchID=480466&messageID=1479212
- Saurabh.

Extract Structure not Being transported with custom Datasource

I'm having trouble transporting a custom datasource from BW 3.5 dev to QAS. The datasource is coming through and showing up in RSA6 but when I click on it I get the following error:
"The extract structure ZOXDBW0123 of the DataSource ZRSPCTRIGTEXT is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view."
Any ideas?
Thanks,
Luke

Thanks for your input. We managed to get through one of the errors on about the 8th try to transport everything together. It might of had something to do with the way things were being grouped in the packages.
So now were just getting an RJ044 Error: "ZRSPCTRIGTEXT: Only tables and views are permitted for extraction".
I think it may be some kind of program error after all, cause our basis consultant took a look and couldn't figure it out at all either. The transport says that everything is going through, but the view were extracting from is still not showing up in QAS. He suggested we blow everything away and try building the datasource again from scratch. So if we can't figure it out today we may try that route tomorrow.
Anyway, thanks again for all the help.

Enhance extract structure conflicts with EXIT_SAPLRSAP_001

Hello All,
We have many BW projects going on at the same time. One area we keep bumping into each other is when we need to enhance an extract structure for a datasource.
What we run into is we have to modify it for one extractor and then for another (let's say both are in the LO Cockpit). How do you handle this?
Problem is one project may be ready to move the enhancement and the other not ready.
This is for transaction data so EXIT_SAPLRSAP_001 is being used. Should we create multiple include programs to avoid this?
Thanks!

I got the question .
Yes if parallaly many deveopers working on the same task thats modifying the extraxt structure for data source then two ways are there
A) Select the time frame whose development is moving to quaality first as definately there will
     be the time frame when the development is moving to quality and all .
     So if some one is working on it comment ht ecode andmove to quality .
     Once your transport order realesed the other can uncomment there code and in the next transport
     there code is also transported with your code .
B) Second is the creation of mulitple includes as there will be no transport order blockage in that .
I suggest the first in the better optiona as no need to increase the number of INCLUDE as one is already provided by SAP is work fine .
Assign marks is the best way to appreciate help whoever it is

Invalid Extract Structure error while creating "Generic DataSource" on a view...

Dear All,
I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow:
AFKO--AUFNR = MSEG--AUFNR
AFKO--PLNBEZ = MARA--MATNR
I have included all the fields from MSEG and other all fields from MARA and AFKO. The view is created successfully and contents/records are also being fetched/displayed from this view.
See screen shot as well:
But when I go to RSO2 to create a "Generic DataSource" on this view. I get a series of warning messages and then error message "Invalid Extract Structure" and therefore I'm unable to create my DataSource on this view. See below screen shots of warning and error messages.
Other warning messages are as follow:
Field GAMNG with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Field PLSVB with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field PLSVN with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field LODIV with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Following is the screen shot of error message:
1. How can I get rid of this error message and be able to create my "Generic DataSource" on top of this "View"?
2. What should I do to resolve the above warning and error messages?
I will appreciate your reply.
Many thanks!
Tariq Ashraf

Hi Vipul,
as you can find in CKIS table, the reference feild for value feild "WERTN" is missing.
As per the table the reference feild is HWAER. This should have been used in place of FWAER.
Try mentioning this in your view and this should work.
Also I am a little enthusiastic to know, what are you trying to get from the datasource.
If you are trying to get the cost estimate of multi level BOM, not (just one child level), then this approach may not work.
There is a BAPI that gives such itemization split. Just FYI, in case you are looking for multi level explosion.
"BAPI_COSTESTIMATE_ITEMIZATION".
Hope this helps.
Naveen.A

BW FICA extract structures corrupted after upgrade from 4.6C to ECC6

Hi All. After the upgrade an include (FKKBWP) in the extract structure FKKOPBW_BASIC contained a field belonging to the APPEND structure ZAFKKOPBW_BASIC (originating from enhancing the configured structure). Also ZAFKKOPBW_BASIC is not visible in FKKOPBW_BASIC anymore, although when checking/activating the structure it complains about duplicate fields, which can only happen if ZAFKKOPBW_BASIC is still referenced. Furthermore, some new includes have also appeared in the extract, amongst others FKKOPBW_EVOLVED.
I have not been able to find any documentation regarding this. Two different systems were upgraded and the structures were corrupted in both systems in the same way, so this is not a fluke.
The application dumps when one tries to access it via SBIW->Settings for Application-Specific DataSources->Contract accounts receivable->Define Fields for the Extraction of Open Items, because the config and structures do not match.
All of this also applies to the Cleared Items as well.
Has anybody encountered this or can somebody point me to some documentation referering to this problem?
Regards,
Johan Loock

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

Enhancing the extract structure for 0FI_GL_4, 0FI_AP_4, 0FI_AR_4

Hi all,
      Does anyone know how to enhance the extraction structures with additional fields for datasources 0FI_GL_4 (General ledger: line item), 0FI_AP_4 (vendors: line item) and 0FI_AR_4 (customers: line item).
Thanks,
Sabrina.

Hi
    Here are the two scenario's described in the note:
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above). Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
Example:   The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
2. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above). In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above).
           Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
           Example:
           The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
           ATTENTION:
           By using Note 430303 you can enhance DataSource 0FI_GL_4 by all fields from table BSEG (instead of BSIS); then the fields are filled automatically in the extractor.
1. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above).
            In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
1. After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
Please let me know.
Thanks,
Sabrina.

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

Include extract structure in transport requst

Similar Messages

Maybe you are looking for