Include function with recordset variable
Hi,
i am trying to include a content from another files with a recordset variable,but it doesn't work...
here is the script
<?php
include_once('proid=$row_RS['No']_page.html');?>
can i know how to fix this?
Thanks
kyo8888888888 wrote:
<?php
include_once('proid=$row_RS['No']_page.html');?>
If you are including a file, the value should be a filename or path. Beginning with "proid=" makes no sense.
Even if it did, your PHP syntax is completely wrong. Assuming $row_RW['No'] contains an expression to which you want to add _page.html, it should be this:
<?php
include_once($row_RS['No'] . '_page.html');
?>
However, an include file should not be a full HTML page. It should contain only the code or HTML that you want to include at that point.
Similar Messages
-
Attempting to test Function with Bind Variable --- What am I doing wrong?
When I try to test a function (ComputeFreight) with a bind variable, I get an error, returned.....
"SQL> EXEC :ComputeFreight :=V_ComputeFreight;
BEGIN :ComputeFreight :=V_ComputeFreight; END;
ERROR at line 1:
ORA-06550: line 1, column 25:
PLS-00201: identifier 'V_COMPUTEFREIGHT' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored"
What am I doing wrong?
Below is my code with description ----
create or replace function "ComputeFreight"(p_ORDERNUMBER IN C_ORDER.ORDERNUMBER%TYPE) -- Passing Ordernumber into Function
return NUMBER
is
-- Declaring Variables
v_ComputeFreight NUMBER(10,2);
v_low number (10,2) := 0.05;
v_high number (10,2) := 0.07;
v_SUBTOTAL NUMBER(10,2);
begin
-- Computing order subtotal (Retrieving Item cost and qty from two different tables, multiplying and adding total order cost)
SELECT SUM(O.QUANTITY * I.ITEMPRICE) INTO v_subtotal
FROM ORDER_LINE O JOIN INV_ITEM I
ON (O.ITEMNUMBER = I.ITEMNUMBER)
WHERE O.ORDERNUMBER = P_ORDERNUMBER;
-- Testing to see which freight charge rate to use
IF
v_subtotal < 300.00 THEN
v_computefreight := v_subtotal * v_low;
ELSE
v_computefreight := v_subtotal * v_high;
END IF;
-- Returning Freight Charge
RETURN v_ComputeFreight;
end "ComputeFreight";
-----------------------------------You have made at least 2 errors.
The first one is the name of your function:
create or replace function "ComputeFreight" (You use double quotas and the mixed case in the function name - it means you
make your function name case-sensitive. In the call of your function you have to use double-quoted form "ComputeFreight", nothing else.
If you your function name has to be case-insensitive, don't use double quotas or
use upper-case form: "COMPUTEFREIGHT".
The next mistake is how your call you function. You have to do the following:
var V_ComputeFreight number
EXEC :V_ComputeFreight := <your function name>
V_ComputeFreight is a bind variable and you have to read more about this.
Rgds.
P.S. and as Dave fairly remarked above you have to pass the argument into the function.
Message was edited by:
dnikiforov -
Using pipelined functions with bind variables in Apex...
Hy all:
I have a table which has about 10 million records and it is hanging up the system when it is trying to retrieve the data from that table... so what I have done is I created a pripelined
function and then trying to retrieve data using an SQL statement ... when I try to use a bind variable to filter by the date and location it is binding according to the location
but not by date ... can anyone help me in this please!!
Help greatly appreciated !
Thanks in advance !Hi Denes:
Create or replace type ohe1 as object (
IMLITM NCHAR(50), IMAITM NCHAR(50), IMDSC1 NCHAR(60), COUNCS NUMBER(22), LIPQOH NUMBER(22),
LIMCU NCHAR(24), LILOCN NCHAR(40), LILOTN NCHAR(60), LILOTS NCHAR(2), IOMMEJ NUMBER(22))
CREATE OR REPLACE TYPE OHE AS TABLE OF Ohe1
CREATE OR REPLACE FUNCTION GET_ohe
return OHE PIPELINED
IS
m_rec ohe1:= ohe1 (NULL,NULL,NULL,0,0,NULL,NULL,NULL,NULL,0);
begin
for c in (select f1.LITM LITM, F1.AITM AITM, F1.DSC1 DSC1, F5.UNCS UNCS,
F21.QOH QOH, F21.MCU MCU, F21.LOCN LOCN, F21.LOTN LOTN, F21.LOTS LOTS,
F8.MEJ MEJ FROM F1 F1, F2 F2, F21 F21, F5 F5, F8 F8
WHERE (F5.EDG='07') AND (F21.QOH != 0) AND F2.IBITM = F1.IMITM
AND F21.ITM = F2.ITM AND F21.ITM = F5.ITM AND F21.MCU = F5.MCU
AND F21.MCU = F2.MCU AND F21.LOTN = F8.LOTN AND F21.MCU = F8.MCU)
loop
m_rec.LITM:=c.LITM;
m_rec.AITM:=c.AITM;
m_rec.DSC1:=c.DSC1;
m_rec.UNCS:=c.UNCS;
my_record.QOH:=c.QOH;
my_record.MCU:=c.MCU;
my_record.LOCN:=c.LOCN;
my_record.LOTN:=c.LOTN;
my_record.LOTS:=c.LOTS;
my_record.MEJ:=c.MEJ;
PIPE ROW (my_record);
end loop;
return;
end;
select LITM , AITM , DSC1 , UNCS*.0001 UNCS, QOH*.0001 QOH, (UNCS*.0001)*(QOH*.0001) AMOUNT,
MCU MCU, LOCN LOCN, LOTN LOTN, LOTS LOTS, jdate(DECODE(MEJ,0,100001,MEJ)) MEJ FROM
TABLE (GET_ohe)
WHERE trim(LIMCU)= TRIM(:OHE_BRANCHID)
AND (jdate(DECODE(MEJ,0,10001,MEJ)) >=:FROMEXPDT
AND jdate(DECODE(MEJ,0,10001,MEJ)) <=:TOEXPDATE)
The MEJ is a julian date and I am trying to convert it into a date ..... using the function jdate! and the pipelined function is created without any errors
and I am able to get the data with correct branch location bind variable but only problem is it is not binding the date filters in the sql.....
Thanks
Edited by: user10183758 on Oct 16, 2008 8:17 AM -
Extending a function with logic stored in a table?
Let's say I have a function with local variables and I have a select statement in it. This statement populates (using into) these variables, one of which contains a condition which has the name of some local variables in it. I would like for this to be evaluated. Is this possible?
for example, if I have variables named local_value1, local_value2 and local_condition and local_condition is loaded from a table column in which the expression is: local_value1 < local_value2
I'd then need to do a: if local_condition then blah....
I've been looking at ways to use execute immediate to do this, but it doesn't look like I can do that, as it wont do substitution of local variables, only bound variables.
I've done this with various scripting languages in the past, but I've not seen anything on the forums on how to do this with pl/sql.
Any suggestions?wether this is really meaningful or not ... here is a way:
michaels> CREATE TABLE demo_logic
( demo_logic_id NUMBER,
demo_logic_statement VARCHAR2(4000),
CONSTRAINT demo_logic_pk PRIMARY KEY (demo_logic_id) ENABLE
Table created.
michaels> -- The data:
michaels> INSERT INTO demo_logic
VALUES (1, 'local_value1 < local_value2')
1 row created.
michaels> INSERT INTO demo_logic
VALUES (2, '(local_value1 = local_value2) or (local_value1 < 7)')
1 row created.
michaels> -- Then the function:
michaels> CREATE OR REPLACE FUNCTION func_demo (condition_id IN NUMBER)
RETURN NUMBER
IS
local_value1 NUMBER := 5;
local_value2 NUMBER := 2;
local_value_to_return NUMBER := 0;
local_condition demo_logic.demo_logic_statement%TYPE;
BEGIN
SELECT demo_logic_statement
INTO local_condition
FROM demo_logic
WHERE demo_logic_id = condition_id;
--next we would evaluate 'local_condition' and if true we would then continue and do more work
--and assign something to local_value_to_return.
EXECUTE IMMEDIATE 'DECLARE
local_value1 number := :1;
local_value2 number := :2;
BEGIN
IF '
|| local_condition
|| ' THEN
:out := 1;
ELSE
:out := 0;
END IF;
END;
USING local_value1, local_value2, OUT local_value_to_return;
RETURN local_value_to_return;
END func_demo;
Function created.
michaels> SELECT func_demo ('1') res
FROM DUAL
RES
0
1 row selected.
michaels> SELECT func_demo ('2') res
FROM DUAL
RES
1 -
Hi,
I see in WWI the INCLUDE functionality with which in a template we can call another template.
When I put this fonctionality in my template (in CG42) and I check and relaesed it, all it's OK. (for information my other template is also in released status).
But when I do a "report from template" in CG02, my variant call well my first template but the functionality INCLUDE inside don't work.
Have you an idea ???
PS 1 : I work in WWI system since 1 year and I begin do know a lot of things
PS 2 : The SAP Note 820516 is correctly implemented (Note is nessessary for the Include Functionality)
Thanks.Hello Martinez,
I hope you would have gone through all the topics related to Include of MSDS. But still listing out some of the check points for your reference if you have missed out anything:
- Do notuse included templates within repeating groups because this has a negative impact on performance.
-If you change a template or cancel the release, this can also affect the templates in which the template has been included. To inform you that the affected templates need to be checked again, the system makes the following status changes:
If you edit a template, all templates with the status In Workin which the edited template is included directly or indirectly are given the status For Checking.
If you cancel the release of a template, all templates with the status In Workor Releasedin which the no longer released template is included directly or indirectly are given the status For Checking.
-When the system expands an included template during report generation, it uses the Microsoft Word function for inserting files. The possibilities and constraints for this function therefore also apply to the inclusion of document templates. This means:
If the template into which the template is included has a header and footer, the system does not transfer the header and footer from the included template. If the template into which the template is included does not have a header and footer, the system transfers the header and footer from the included template.
-In Microsoft Word, documents cannot be inserted in other documents in certain cases. For example, a document that contains a text box or other drawing objects cannot be inserted in text boxes, legends, comments, footnotes, and endnotes. In these cases, including document templates is also not possible and errors occur during report generation.
Regards,
Niraj -
Hi,
When I a include of a file in a jsp file it could look like this:
<%@ include file="/jsp/ram01/login_ram2.jsp" %>
Would it be possible to replace file value with a variable ? I tried but it
does not seem to work.
...Thanks Per
Hi,
The include directive (<%@ include ... %>) is a translation-time activity which
is not processed in the context of a particular request (although JSP
compilation is normally done in the context of a request being submitted for
the page). As Ruslan points out, the include action (<jsp:include .../>) does
allow a jsp expression for the page specification -- this is because the
include action is a runtime inclusion. The short story is that <%@ include ...
%> is not an abbreviation for <jsp:include ... /> -- they have different
semantics.
Hope this clears up any confusion,
Robert
Per Lovdinger wrote:
> Hi,
> When I a include of a file in a jsp file it could look like this:
>
> <%@ include file="/jsp/ram01/login_ram2.jsp" %>
>
> Would it be possible to replace file value with a variable ? I tried but it
> does not seem to work.
>
> ...Thanks Per
-
Having trouble with using variables in functions and after functions..
Morning,
I have simplified this, as it represents the core of what’s I obviously don't know how to do.
Problem:
Say I populate that variable by reading in a list if IP addresses from file, finding the line that matches the hostname and place that string into the $IPAddress variable for use later throughout the script. I did not run into a significant problem
until I decided to convert the routine of looking up the IP address and populating the variable into a function. As soon as I made it a function, and called that function, the $IPAddress variable only had the data in it until the function completed.
Once the function had done its work, and had placed the data into the variable, I expected that “new” data to be available after the function had completed..in that variable. But it’s like the $IPAddress variable in the main script is a totally
different data then the variable with the same name that’s used within the function.
So I think this demonstrates some of what’s kicking my butt..
$IPAddress = "This is the wrong data”
Function TestFunction ()
$IPAddress #call to display the contents of the variable at the start of the function.
$IPAddress = Read-Host -Prompt "Please enter the text ‘Goober’"
$IPAddress #call to display the contents of the variable at the end of the function.
TestFunction
$IPAddress
The output I get is:
This is the wrong data
"Please enter ‘Goober’" : where I enter Goober
Goober
This is the wrong data
Huh?
I had expected:
This is the wrong data
"Please enter ‘Goober’" : where I enter Goober
Goober
Goober
What good is the repeatability of a function if it’s output is lost?THis seems to work.. IS there any reason NOT to do this?
$Global:IPAddress= "This is the wrong data” #"
Function TestFunction{
Write-Host $IPAddress-fore green
$host.ui.RawUI.FlushInputBuffer()
$Global:IPAddress =
Read-Host -Prompt
"Please enter the text ‘Goober’"
return$Global:IPAddress
TestFunction
return$Global:IPAddress -
SLOW report performance with bind variable
Environment: 11.1.0.7.2, Apex 4.01.
I've got a simplified report page where the report runs slowly compared to running the same query in sqldeveloper. The report region is based on a pl/sql function returning a query. If I use a bind variable in the query inside apex it takes 13 seconds to run, and if I hard code a string it takes only a few hundredths of a second. The query returns one row from a table which has 1.6 million rows. Statistics are up-to-date and the columns in the joins and where clause are indexed.
I've run traces using p_trace=YES from Apex for both the bind variable and hard coded strings. They are below.
The sqldeveloper explain plan is identical to the bind variable plan from the trace, yet the query runs in 0.0x seconds in sqldeveloper.
What is it about bind variable syntax in Apex that is causing the bad execution plan? Apex Bug? 11g bug? Ideas?
tkprof output from Apex trace with bind variable is below...
select p.master_id link, p.first_name||' '||p.middle_name||' '||p.last_name||' '||p.suffix personname,
p.gender||' '||p.date_of_birth g_dob, p.master_id||'*****'||substr(p.ssn,-4) ssn, p.status status
from persons p
where
p.person_id in (select ps.person_id from person_systems ps where ps.source_key like LTRIM(RTRIM(:P71_SEARCH_SOURCE1)))
order by 1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 1 27 0
Fetch 2 13.15 13.22 67694 72865 0 1
total 4 13.15 13.23 67694 72866 27 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 62 (ODPS_PRIVACYVAULT) (recursive depth: 1)
Rows Row Source Operation
1 SORT ORDER BY (cr=72869 pr=67694 pw=0 time=0 us cost=29615 size=14255040 card=178188)
1 FILTER (cr=72869 pr=67694 pw=0 time=0 us)
1 HASH JOIN RIGHT SEMI (cr=72865 pr=67694 pw=0 time=0 us cost=26308 size=14255040 card=178188)
1 INDEX FAST FULL SCAN IDX$$_0A300001 (cr=18545 pr=13379 pw=0 time=0 us cost=4993 size=2937776 card=183611)(object id 68485)
1696485 TABLE ACCESS FULL PERSONS (cr=54320 pr=54315 pw=0 time=21965 us cost=14958 size=108575040 card=1696485)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
1 SORT (ORDER BY)
1 FILTER
1 HASH JOIN (RIGHT SEMI)
1 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'IDX$$_0A300001' (INDEX)
1696485 TABLE ACCESS MODE: ANALYZED (FULL) OF 'PERSONS' (TABLE)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file scattered read 1276 0.00 0.16
db file sequential read 812 0.00 0.02
direct path read 1552 0.00 0.61
********************************************************************************Here's the tkprof output with a hard coded string:
select p.master_id link, p.first_name||' '||p.middle_name||' '||p.last_name||' '||p.suffix personname,
p.gender||' '||p.date_of_birth g_dob, p.master_id||'*****'||substr(p.ssn,-4) ssn, p.status status
from persons p
where
p.person_id in (select ps.person_id from person_systems ps where ps.source_key like LTRIM(RTRIM('0b')))
order by 1
call count cpu elapsed disk query current rows
Parse 1 0.02 0.04 0 0 0 0
Execute 1 0.00 0.00 0 0 13 0
Fetch 2 0.00 0.00 0 8 0 1
total 4 0.02 0.04 0 8 13 1
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 62 (ODPS_PRIVACYVAULT) (recursive depth: 1)
Rows Row Source Operation
1 SORT ORDER BY (cr=10 pr=0 pw=0 time=0 us cost=9 size=80 card=1)
1 FILTER (cr=10 pr=0 pw=0 time=0 us)
1 NESTED LOOPS (cr=8 pr=0 pw=0 time=0 us)
1 NESTED LOOPS (cr=7 pr=0 pw=0 time=0 us cost=8 size=80 card=1)
1 SORT UNIQUE (cr=4 pr=0 pw=0 time=0 us cost=5 size=16 card=1)
1 TABLE ACCESS BY INDEX ROWID PERSON_SYSTEMS (cr=4 pr=0 pw=0 time=0 us cost=5 size=16 card=1)
1 INDEX RANGE SCAN IDX_PERSON_SYSTEMS_SOURCE_KEY (cr=3 pr=0 pw=0 time=0 us cost=3 size=0 card=1)(object id 68561)
1 INDEX UNIQUE SCAN PK_PERSONS (cr=3 pr=0 pw=0 time=0 us cost=1 size=0 card=1)(object id 68506)
1 TABLE ACCESS BY INDEX ROWID PERSONS (cr=1 pr=0 pw=0 time=0 us cost=2 size=64 card=1)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
1 SORT (ORDER BY)
1 FILTER
1 NESTED LOOPS
1 NESTED LOOPS
1 SORT (UNIQUE)
1 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'PERSON_SYSTEMS' (TABLE)
1 INDEX MODE: ANALYZED (RANGE SCAN) OF
'IDX_PERSON_SYSTEMS_SOURCE_KEY' (INDEX)
1 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'PK_PERSONS'
(INDEX (UNIQUE))
1 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'PERSONS' (TABLE)Patrick, interesting insight. Thank you.
The optimizer must be peeking at my bind variables with it's eyes closed. I'm the only one testing and I've never passed %anything as a bind value. :)
Here's what I've learned since my last post:
I don't think that sqldeveloper is actually using the explain plan it says it is. When I run explain plan in sqldeveloper (with a bind variable) it shows me the exact same plan as Apex with a bind variable. However, when I run autotrace in sqldeveloper, it takes a path that matches the hard coded values, and returns results in half a second. That autotrace run is consistent with actually running the query outside of autotrace. So, I think either sqldeveloper isn't really using bind variables, OR it is using them in some other way that Apex does not, or maybe optimizer peeking works in sqldeveloper?
Using optimizer hints to tweak the plan helps. I've tried both /*+ FIRST_ROWS */ and /*+ index(ps pk_persons) */ and both drop the query to about a second. However, I'm loath to use hints because of the very dynamic nature of the query (and Tom Kyte doesn't like them either). The hints may end up hurting other variations on the query.
I also tested the query by wrapping it in a select count(1) from ([long query]) and testing the performance in sqldeveloper and in Apex. The performance in that case is identical with both bind variables and hard coded variables for both Apex and SqlDeveloper. That to me was very interesting and I went so far as to set up two bind variable report regions on the same page. One region wrapped the long query with select count(1) from (...) and the other didn't. The wrapped query ran in 0.01 seconds, the unwrapped took 15ish seconds with no other optimizations. Very strange.
To get performance up to acceptable levels I have changed my function returning query to:
1) Set the equality operator to "=" for values without wildcards and "like" for user input with wildcards. This makes a HUGE difference IF no wildcard is used.
2) Insert a /*+ FIRST_ROWS */ hint when users chose the column that requires the sub-query. This obviously changes the optimizer's plan and improves query speed from 15 seconds to 1.5 seconds even with wildcards.
I will NOT be hard coding any user supplied values in the query string. As you can probably tell by the query, this is an application where sql injection would be very bad.
Jeff, regarding your question about "like '%' || :P71_SEARCH_SOURCE1 || '%'". I've found that putting wildcards around values, particularly at the beginning will negate any indexing on the column in question and slows performance even more.
I'm still left wondering if there isn't something in Apex that is breaking the optimizer "peeking" that Patrick describes. Perhaps something in the way it switches contexts from apex_public_user to the workspace schema? -
Template having export to excel functionality with filter values in WAD
Hi,
I need to create a template which has export to excel functionality with all the filter values that the user has selected in the selection screen.
export to excel can be done but how can be the output excel sheet contain only those values which we see in browser when the report is executed with some filters.
Regards,
ApekshaHi Apeksha,
you can achieve this requirement (unless I do not know the detailled requirement) perhaps by using this way of implementation:
1. Create a new template which contains an info_field which does a data binding to the variable values or the characteristic you want to display. Set the visibility of the top container to "hidden". Add a empty data provider to this template. However be aware that the name for the (empty) data provider must match the name of the data provider within the original template you want to print.
2. Open your original template and include the template you created in step 1 (Advanced: Web Templates and technical name of the web template created in step 2). Choose the appropriate location (above/below the analysis item).
3. Check the settings of your export command: do not set a special web item to be printed.
If you export the template within web the second template should be printed correctly displaying the variable settings chosen in step 2 for the info_field.
Brgds,
Marcel -
Problem with application-variables - CFLOCK?
Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( "<p><p> The current user is no
longer valid, please log in
> again.</p></p>" & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam -
LOV(af:selectOneChoice) with bind variable in af:table
Hi All,
I have a table where a column is defined as dropdown(af:selectOneChoice). The query for selectOneChoice has a bind variable which needs to be set as a value from the base view Object corresponding row.
Suppose a table Employee
EmpId EmpName EmpType Authorization
101 John Temp No
The above table is created as af:table and 'Authorization' is implemented as dropdown(af:selectOneChoice) . The selectOneChoice has a query(AuthorizationLovVVO) with bind variable . For each row of af:table(EmployeeVO) , af:selectOneChoice query(AuthorizationLovVVO) requires
the corresponding row(EmployeeVO) 'EmpType' to be set as value of bind variable.
Can you please suggest how can we achieve this functionality.
Edited by: 907302 on Oct 17, 2012 7:22 AM
Edited by: 907302 on Oct 17, 2012 7:22 AMI have checked the following post where it has been suggested to access the the current row value as groovy expression.
groovy for bind variable
Suppose my AM name is 'TestAM' , i have tried the below expressions for value of bind variable but it does not work :
1) adf.object.TestAM.findViewObject('EmployeeVO1').currentRow.EmpType
2) adf.object.TestAMDataControl.findViewObject('EmployeeVO1').currentRow.EmpType
None of the above expressions work and i get the error while running the page as 'Variable NotesAM is not recognized.' / 'Variable NotesAMDataControl is not recognized.' .
Can you please suggest if we can achieve the functionality using this approach . Also let me know if i am missing something in the above expression. -
Error when opening a workbook with mandatory variables
BEx analyzer displays an error message window in the same time as the variable popup window.
The worbook is linked to 1 query that uses 2 mandatory variables (month ?, year ?), and was defined in the test system.
I assume that values are thus saved within the workbbok.
The developper had 0bi_all autorisation.
When a reporting user is opening it (also in the test system), the error message is displayed.
This happens only the 1st time when Analyzer is started, and by clicking on the OK button, we are able to run the query.
The next workbook refresh runs without the error message display.
Question = does anybody know the reason of this, and how to avoid the error message ?
more infos:
error message E019(R9E) appears for each variable (thus, 2 time with a query with 2 variables):
Help type 5 is not valid for the platform NONE
Exception 5 occured while calling IWB_HTML_HELP_URL_GET
the details of this error message is:
Diagnosis
You tried to start the online help with help type on platform. Help type is not supported on this platform.
System Response
Profile parameter eu/iwb/help_type must contain a valid help type.
Diagnosis
The documentation is not correctly connected to the BI server.
System Response
The documentation cannot be displayed.i checked the query and authorisation with RSRV, but this didn't help, furthermore, a lot a functions are not implemented in the system, sorry.
i also changed the query and workbook, and i think that it depends on the workbook release 3.x or 7.
imagine following situations: same query 7.0, same workbook 7.0
with BI7
1) opening the query with variables doesn't display the error message
2) refreshing the workbook with the query with variables displays the error message (only for a non mandatory variable - as soon as there is a variable, the error message is displayed)
3) refreshing the workbook with the query without variables doesn't display the error message
with BW 3.x
4) refreshing a new workbook 3.x with the query with variables doesn't display the error message
i also investigate in the function modules for workbooks (RS...), but nothing helped.
i still think that it is linked to authorisations, because with sap_all, the message isn't displayed.
how can i continue ?
Edited by: Claire Mignerey on Mar 17, 2009 2:37 PM -
Apple tv second generation will no longer function with netflix
My apple tv won't function with my netflix anymore and i cannot figure out why every film i select it states this error message
A network error has occured and this title cannot be played or found at this time.
i know my internet is working just fine and yes i updated to the latest apple tv version but nothing netflix won't work but everything else does what gives could this be because netflix updated to a new version and apple tv hasn't updated to the new version of netflix yet???Yes i did reboot same error message and the latest version of the netflix streaming app is 2.37 on all ios devices including apple tv but they went to netflix version 2.38 on ps3 and xbox 360 so now it doesnt work on netflix at all i found this out after talking to netflix customer support.
-
when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.
-
Error: Object variable or With block variable not set.
Hi,
when i try to fill the control tables and browse for the target period in HFM (sys 9.3.1) i get the error: Error: Object variable or With block variable not set.
When browsing for the target value in the location for the value no problem occurs.
Anybody a clue?Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch
Maybe you are looking for
-
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first. (I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs). I have ha
-
How do you "rip" ipod music into your itunes..PLEASE READ!
Yeah, a while back ago, all my music got deleted, i kept what i had on my ipod in fear that if i plugged it back up all my m usic would be gone for good. So i ask you, is there any way to plug in your ipod, and all the info be in your playlist, kinda
-
I have this error coming up 150:30 does anyone know how to get around it?
when I open Photo Shop it says error 150:30
-
Hi, I'm trying to import one view from SQL 2005 DB. I took into consideration all rules like upper case view name, I gave the required permissions to the user BW and also created the view by the same user. There's no problem with reading data source
-
How to create a z-table to maintain RFC destinations??
Dear Experts, Can you please guide me to create a Z table where I can maintain RFC destinations?? Regards, Mamai.