Include large .gif and .jpg in pdf reports how?

hi
please can anyone enlighten me. i wish to include large(ish) graphics in pdf reports and this works if it is a small gif file of about 5Kb. anything over that fails.
i have read the document in http://www.oracle.com/technology/obe/hol08/apexprnt/apexprnt2_otn.htm and this works with extremely small gif files ONLY!!
this is something i need to resolve urgently and would REVERE any solution.
thanks

Have the same problem too.
When i'm creating xlst template larger than 40kb pdf generation fails.
I damped request data recived by apex_fop.jsp and it shows that there is some (about 50) corrupted bytes between 40kb and 50kb.
Same problem happens when there are to much data in xml, because it comes together in http post request.
I suppose that there is some problems with utl_http, that corrupts some of report data. Or the post reques is not well-formed by apex.

Similar Messages

GIF and JPG become damaged

I have a weird problem with some GIF and JPG images which I
use in a RoboHelp project. They appear to get damaged, but I nor
anyone else changes them. The bottom part becomes scrambled or
entirely black. The strange thing is that when I put the project on
my local hard disk, nothing happens, but when they are on the
server (with RAID disk sytem), then trouble begins.
Until now, nobody else who's wordking on the server reported
damaged files, so it seems that I'm the only one so far.
The trouble began on Sept. 11. Some projects I worked on
since that day have problem files. Most projects are RoboHelp, but
there's also a Word-project involved with a damaged JPG-file.
Anyone?

Hi Peter
I've indeed already experienced that some RoboHelp projects,
mainly large onces, are better run on the local hard disk.
But this is a different problem I think. The project is run
locally, which goes well, but when I copy it to the server disk for
backup reasons, then some GIF-files get damaged after a while,
while nobody opens the project on the server. When I copy the same
files to another server's disk, then the files do not get damaged.
I also have a Word project that has a JPG file that has got
damaged.

About gif and jpg

who can give me the website about gif and jpg format?
thanks guy.

This is a crosspost.
Chances are that you won't get a resonable response when you do that. Try reading How to Ask Questions the Smart Way. That will give you plenty of pointers on getting reasonable responses.
The response in your other post is a literal answer to you question, google is your friend.
For a direct answer, here's the the Jpeg FAQ. If what you are actualling requesting is "how do I use images in Java" take a look at the ImageIcon class, the javax.imageio package and search this forum for examples. You could also check the How to use Icons in the Java Tutorial.

How can I invalidate everything except .gif and .jpg

Hi
I need to invalidate every page except the static objects as gif jpg. Can I create a rule that invalidates everything except gif and jpg.
Thanks

currently webcache invalidation does not have the expressive power to describe "anything but".
however, you can give a list of rules in single invalidation message, each matching one type of pages, such as under particular directory, and with fixed suffix. and the whole list of criteria effectively achieves "anything but".

Some GIFs and JPGs appearing with yellow "wash" when loading in Safari

Hi,
I've flicked through forums, google, and called my top graphics people but nobody can seem to help, or has ever even heard of, my issue.
Here it is in a nutshell:
Some GIFs and JPGs appear with a yellow "wash" when being loaded in Safari. I can confirm this is happening on 3 different Macs, and even on a PC running Safari.
Safari 3.1.1 on Windows XP
Safari 3.1.2 on Mac OSX 10.5.5
Here's some examples of it occurring:
http://staging.tomatosource.com.au/test/bad.jpg
http://staging.tomatosource.com.au/test/bad.gif
You might need to refresh the page in Safari a couple of times to see the flicker but it's there.
I've tried:
- resaving images with and without "progressive" and "interlaced"
- a variety of different colour palettes
- taking a screenshot of the image, putting back into Photoshop and resaving
Has anybody seen this issue before? Unfortunately I can't go live with this site until I fix this very strange error.
Any comments would be greatly appreciated!
Cheers,
Jase.

Totally independently from your current problem, Safari is cr@p. Dump it.
All Apple applications, from the Finder through Preview and iPhoto to Safari, assign Monitor RGB to ALL untagged images, even if they were created or saved in sRGB.
The only current properly color-managed web browser is Firefox 3.0.1. Just keep in mind that you have to enable color management deep inside the guts of Firefox.
See this existing thread in the Adobe Photography forum:
Ramón G Castañeda, "Beware of using Adobe Web Galleries" #49, 14 Sep 2008 4:52 pm

Once i scan a document and create a pdf. how do i then change the fields on the document

once i scan a document and create a pdf. how do i then change the the info on the document. i have to update a couple of the columns and cannot figure out how. please help.

You are probably only looking at a graphic. You have to run OCR before you can do the corrections. For your use, you would need the ClearScan option. Once you have a text based document, you can then use the Text Touchup Tool. Expect to have problems. Editing a PDF is not easy to do well and is not really recommended, except for minor edits. Wordwrap and such features are not part of the editing options. It would be best if you could get an electronic copy of the original, edit that, then create a new PDF.

I have an iMac with OS x 10.8. Every folder t hat opens has (in the gray zone on top) file icons and jpg photos listed. How do I remove them?

I have an iMac with OS x 10.8. Every folder t hat opens has (in the gray zone on top) file icons and jpg photos listed. How do I remove them?

Control-click each and choose Remove Item, or Command-click them and drag them out.
(85250)

How to pre-populate the sender's mail and attach a pdf report.

I mean....supppose i want to prepopulate the senders email field in a email dialogue box and the have an option to attach a report to the mail...so that a mail can be sent to the senders mail id as well as the recepients id.

Actually .....how should i do this in Flex......i mean the process...and that too...how to retrieve the email of the person who has logged in??

My email screen got really large font and I cannot figure out how to get it back to normal. Has to be a Firefox thing because when I open it in Explorer it is normal size.

While typing on my email screen (Comcast), it just started magnifying and is now quite large font. I cannot figure out how to get it back to the normal size.

Hi,
Please try pressing '''Ctrl''' + '''0''' (zero). This resets the zoom. Alternatively, '''View '''(Alt + '''V''') > '''Zoom''' > '''Reset'''.
[https://support.mozilla.org/en-US/kb/how-do-i-use-zoom?s=zoom&r=0&as=s Using Zoom]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Gif and JPG save for web file sizes in CS2 and CS3

Gif 64 dittered default CS2=2.63KB CS3=4.83KB
JPG CS2Low=1.42KB CS3=4.03KB
JPG CS2Medium=1.90KB CS3=4.51KB
JPG CS2High=3.38KB CS3=5.99KB
Why? Is there any solution besides keep using CS2 for web?
Thank's in advance.
regards
Fernando Bergamaschi

Each of the three JPG files increases by the same amount -- 2.61 Kbytes. That sure sounds like some common header block is being added in CS3. Did you check the "Optimize menu" button next to "Preset" just to make double-sure "Include XMP" isn't enabled? Or some other setting like that? Or check both images in Bridge to see if something is being added.

How can I take a very large gif and print it over many pages?

I have a gif image that, if printed, comes out all compacted (read: much too small) on one page. It is so small that it cannot really serve as a poster that I want to hang in my classroom.
My desired result is to take the image and somehow split / divide it so that I can print it over multiple pages, and the image be properly sized, which I can then connect to make a poster.
Any ideas how to get this done with Fireworks?
Thanks all! :-)

Illustrator is good for this. Its Print dialog allows for page tiling with adjustable overlap and includes a thumbnail preview.
You can print from Fireworks, but it relies on the native print options of your operating system, which may or may not allow you to print a single image across multiple pages.

How to include employee grade and step in a report

If you navigate to People> Assignment>Others Grade Step.
I can see the Grade and the Step.
I would like to create a report that shows me the Basic salary for all staff and their grades and steps.
please can some guide me with the query.
appreciate all your help/suggestions.

Try this query
select pspp.assignment_id,pps.name, psp.spinal_point, pg.name "Grade",peevf.screen_entry_value
from per_spinal_point_placements_f pspp,
     per_parent_spines pps,
     per_spinal_points psp,
     per_grade_spines_f pgs,
     per_grades pg,
     pay_element_entries_f peef,
     pay_element_entry_values_f peevf,
     pay_element_types_f petf,
     pay_input_values_f pivf
where pps.parent_spine_id = pspp.parent_spine_id
and psp.parent_spine_id = pps.parent_spine_id
and pgs.parent_spine_id = pspp.parent_spine_id
and pgs.grade_id = pg.grade_id
and pspp.assignment_id = peef.assignment_id
and peef.element_entry_id = peevf.element_entry_id
and peef.element_type_id = petf.element_type_id
and petf.element_name = :Element_Name--'Basic Pay'
and peevf.input_value_id = pivf.input_value_id
and peef.element_type_id = pivf.element_type_id
and pivf.name = :Input_Value_Name--'Initial Basic'
and trunc(sysdate) between pspp.effective_start_date and pspp.effective_end_date
and trunc(sysdate) between peef.effective_start_date and peef.effective_end_date
and trunc(sysdate) between peevf.effective_start_date and peevf.effective_end_date
and trunc(sysdate) between petf.effective_start_date and petf.effective_end_date
and trunc(sysdate) between pivf.effective_start_date and pivf.effective_end_dateHTH
Not Tested

GIF and sticky page size

I have scanned (from HP N6310) a paper to a .TIF image. Original is A4 and resolution, as set in scanning software 300dpi. Photoshop (CS5) reports (for the .TIF fiile) pixel dimension as 2574*3540 pixels, page size as 21.8 * 29.9 cm and resolution as 300 dpi. I "Save for web and devices" as a GIF file. When I now retrieve the .GIF image in Photoshop it reports same pixel dimension but page size 91*125 cm and resolution as 72 dpi.
This is a problem because .JPG images do not tend to change dimension and when I use Adobe Acrobat (V9) to combine .GIF and JPG file ino one PDF document, the pages show at different sizes which looks funny and is very impractical.
I try do fix this; retrive the GIF file in Photoshop and change page size back to A4 (21*29 cm) and resolution back to 300 dpi and Ctrl-S or Save. Does not help. If I retrive the file again in Photoshop it is still/back to 91*125 cm and 72 dpi. What is going on and what can I do about it????
It seems Photoshop is the main offender but if I had found a way to change page size of a PDF file when "in" Acrobat it had probably solved the problem too. I run Windows 7.

Let me rephrase my problem. I scan documents that are a mixture of pages with text, photos and diagrams. Black and white, greyscale or color. If I scan to PDF in color I get huge file sizes, even after Acrobat "Optimize". So I scan to the different pages to TIF bw, gray or color. I then save (Photoshop - Save for Web adn devices) to a compressed file format , JPG or GIF (I also tried PNG and the result is similar) depending on what sort of pictures there are. The result is OK (good looking and small file size) and I am able to import all singel page files into one PDF document. The only problem is that Photoshop and/or Acrobat seem to have their own idea about individual "page sizes". So in the final PDF different pages have different sizes. The problem is with GIF that does dispaly the wrong size already in Photoshop - unchageable but also it seems Acrobat import differently depending on color or bw (file size?). The whole thing is a mess and I have not been able to systematically track all variation. The only setting I found that could help is Photoshop - image - image size but that is where I got thsoe strange results.
Jon

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unicode Font in a PDF report (iTextSharp)

I tried to use unicode font (Arial Unicode MS - arialuni.ttf) in a PDF document generated with iTextSharp. I am able to create the PDF document with this font.
In the iTextSharp documentation, we are suppose to be able to send unicode, but I don't understand how to do this in Labview.
I read A List of Tips and Tools for using Unicode in LabVIEW but I am stuck. Any ideas?
Jean-Marc
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp

I don’t have the new version in my actual computer. I will go by memory.
1)      I found no way to connect a LabVIEW string to an Unicode iTextSharp phrase or paragraph;
2)      The only way I found is to add a .NET string (mscorlib.system.string --> Unicode Basic Multilingual Plane) to an iTextSharp phrase or paragraph.
3)      You construct this .NET string with an array of UTF16.
To construct the U16[ ]:
1)   I wrote the text in NotePad (Unicode).
2)   I copy the string in a LabVIEW string (not Unicode);
3)   I remove the BOM;
4)   I swap the bytes (2 bytes by to 2 bytes) and I typecast in U16.
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Attachments:
Crude example Unicode Paragraph LV2013.vi ‏14 KB

Include large .gif and .jpg in pdf reports how?

Similar Messages

Maybe you are looking for