Include not trigerred for BADI BADI_ORDITM_CHANGE

Hello all,
i have place an include in the badi BADI_ORDITM_CHANGE, with interface name /DSD/IF_EX_SL_FSR_DEFFMT_P, when i am doing final settlement in transaction /N/DSD/SL_COCKPIT, it's not trigering my code at all. there was an OSS NOTE for that which is "930654" which was implemented.
can anyone help me on this please??
Thanks a lot

Hi
This can be achieve with the following logic.
Assign an authorization key to the characteristics which you want to control and assign the key to the user profile.
Once the authorization key is assigned, you can proceed with the following :-
Hit USRBF2 table which contains the information on Authorization object and Authorizations for an User.
From the table USR12, you can get the authorization values for the user specific authorization object and authorization combination.
Based on the authorization or authorization values you can restrict the users to enter the data in the characteristic fields by writing the code in the BADI's like CACL_CHARACTER_INPUT or CACL_VALUE_CHANGE
Hope it helps.
Regards,

Similar Messages

Workflow not trigerring for Clock-in/clock new entries or corrections

Dear All,
I am using the workflow ws12300111 template for clock-in/clock out for approval to manager. Is this appropriate one or anything else is available, whenever i raise request for the clock-in/clock out change in ess a new request is getting generated in UWL of MSS but it is not showing the clock-in/clock out change request for approval.
Regards,
Rajasekar.

It is the correct WF, as there is no other wf available for it
You need to use the report RPTCORAPP
In order to approve the request you have to use the back end report. It
can approve the requests with the work flow as well.
We would recommend you to use the
report for the clock in clock correction approval as there is no
specific I view available for this as it might be cumbersome for the
Manager to do mass approval.
Here are the reports which you can refer.
·        RPTCORTMAIL (Clock-In/Out Corrections: Request Correction of
Errors)
·        RPTCOREMAIL (Clock-In/Out Corrections: E-Mails to Involved
Persons)
·        RPTCORPOST (Clock-In/Out Corrections: Post)
·        RPTCORSTOPWF (Clock-In/Out Corrections: End Open Processes)
·        RPTCORLIST (Clock-In/Out Corrections: Check Corrections)
·        RPTCORAPP (Clock-In/Out Corrections: Approve Documents)
·        RPTCORERR (Clock-In/Out Corrections: Process Errors in Entries)

Idoc not Trigerring for Change Pointers in CREMAS only for 2 fields

Hi All,
I am trying to trigger the Idoc for 2 fields ( Contact Person First Name & last Name) KNVK-NAMEV and KNVK-NAME1. I have maintained the fields in BD52. Whenever I change the fields, entries get created in CDHDR, CDPOS and BDCP. But the Idloc doesnt get triggerred. But if I change any other fields of LFA1 or LFB1 for the same vendor, the Idoc gets created. Can anybody please help out on this?
Thanks,
Geetha

Hi,
Just check after executing the program "RBDMIDOC" idocs getting triggered or not.
Thanks,
Asit Purbey.

Workflow not trigerring for BO : ZFIPP ( FIPP )

Hello Fiends ,
I have an issue with the Workflow not getting triggered.
The setup is working fine on development system , but not on test system.
Have created a custom BO : ZFIPP for FIPP and workflow template for FIPP - create and change event.
The event linkage has been activated on SWE2 . The workflow template has no issues. I have tested using SWUE and am able to create a workitem . We are using FM :SWW_WI_CREATE_VIA_EVENT_IBF to create the event.
But , When i park a document using FV50 t.code , the workflow does not trigger . Also , I tried testing the BO : ZFIPP with the parked document , Its not able to find the data from the workflow tables.
Please assist.
thanks
Raghu V

Hi,
Follow Amandeep Singh's previous post. If EXIT_SAPLF051_002, EXIT_SAPLF051_002 are not raising exceptions, see if the functional configurations under the below path is right. Better to take a functional consultant's help.
SAP Reference IMG -> Financial Accounting -> Financial Accounting Global Settings ->Tools ->Workflow -> Workflow for document parking
Verify release from amount and the workflow ID entered in the detail screen of OBWA.
Regards,
Krishnakumar PM

Implementation for CRM_MKTPL_OL_OBJ not trigerring

Hi,
I have Created an Implementation for the BAdi CRM_MKTPL_OL_OBJ with Filter Value 'TPM' . I have Implemented the Method 'CHECK_ATTRIBUTES' to check the Data on the Trade Promotion Header and raise Error Messages for some Missing Data. But my Custom Implementation is not trigerring and only the Standard Implementation for this BAdi (CRM_MKTPL_OL_OBJ_TPM) with the Same Filter Value 'TPM' is trigerring. Can someone let me know if there is something I am missing.
Thanks and Regards,
H.Krishnan

Hi,
I'm not sure about this. But, the BADI/ES "CRM_MKTPL" does not have the "Multiple Use" set. It depends on filter values and only one implementation per filter value is used.
Regards,
Arun Prakash

"Include when checking for new mail" option not working

Hi,
I have 2 email accounts set up on mail, but I only want 1 of them to pull down mail (the other will only be used for sending). For the account I don't want to get mail I deselect the box "include when checking for new mail".
However, Mail still pulls down messages from that account. When I put in the correct server settings for the incoming, it pulls all of my mail (in this case gmail), and when I put in bad settings (as a way of avoiding getting the mail) I get an annoying error message.
Does anyone know of a way to make that function of Mail work?

Hi feuerstein.
How have you set up the Gmail account in Mail (POP, IMAP), and under which circumstances does Mail check for new mail on that account? More info, please.
BTW, Mail doesn’t automatically check when launched every account if Include when automatically checking for new mail has been turned OFF. That happens with IMAP accounts only (and only if they’re “online”), not with POP accounts, but it isn’t clear at all whether that’s what you’re talking about...

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

BADI Error: Field GOITEM-ACCT is not ready for input ? HELP!

I get this error message when testing my BADI in the MIGO Transaction. The BADI is the MB_MIGO_BADI. It is from the Line_modify method. Here is the entrie message:
BAdI: Field GOITEM-ZZREG_ACCT is not ready for input. (Change is not copied over)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZREG_ACCT have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
The field is defined correctly in the screen as an input/output field - so it does not relate to that.
HELP!!!!!

Yes - I have reviewed all of the code and I never do any modify to the screen attributes of a field - although it sure acts like it. The screen lets me put in data and it stays there up until it finishes the method line_modify. The error is when i press return after i enter the field- it completes the BADI method and then goes to the main program and does field validation and always comes back with some internal table field called "work" with a value of 0 and it should be a value of 6.
Thanks!
Scott

Filter for BAdi CRM_ORDER_STATUS does not work in WebUI

Hello,
we have made an implementation for BAdi CRM_ORDER_STATUS for our sales cycle.
In detail:
The BAdi implementation shall be triggered if the user sets a special user status within an opportunity.
Therefor we have used the standard filter functionality provided by this BAdi (giving the correct header status profile and user status).
Using transaction CRMD_ORDER in SAP GUI, creating an opportunity and setting the special user status -> the BAdi implementation is triggered as expected.
But: If we are using the WebUI the done BAdi implementation is triggered at every roundrip caused by creating/editing an opportunity and not only at setting the user status.
Does anybody of you made similar experiences with using BAdis in WebUI (SAP CRM 7.0)?
Cheers,
André
**EDIT***
It´s possible coding the filter within the BAdi implementation.
But we prefer using the provided SAP standard.
Edited by: Andre Schillack on Apr 23, 2009 8:47 PM

Hi Andre,
I just checked my system CRM2007 and below is what I found in WebUI mode:
During the build of DDLB for Status field, it calls method cl_crm_uiu_status_info=>get_status_info. What it does is:
1. It derives all status codes for the user status profile (based on customizing)
2. And then for each status code, it triggers the BADI based on filter value. In the BADI, customer can decide whether the particular status (filtered value) is allowed to see in the DDLB.
Since it is building the DDLB for Status field every time there is change on the opportunity and therefore DDLB method calls the BADI every time to build the Status code list.
If you want to do further processing based on status change in the method BEFORE_CHANGE, you can try the following code.
if is_status_wrk-active_old = 'X' and
is_status_wrk-user_stat_proc = 'CRMACTIV' and
is_status_wrk-status = 'E0002'.
Do something
endif.
I hope I have not confused you.
I feel that this is standard behaviour in WebUI. You may want to check with SAP OSS also.
Regards,
Paparao Undavali

"Include Header Row in Subsequent Pages" is not working for table

Hi,
I'm using version 8.1.2.3337.1.509884.
The pagnation feature "Include Header Row in Subsequent Pages" is not working for any table in my design. ( the check-box can not be checked no matter how many times I clicking it)
I put such table already in a flow bodypage.
Any similar issue reported?
Any suggestions?
Thanks.
-Vicky

Hi Raghu,
Appologies that I uploaded a wrong version of xdp file yesterday.
Here is the correct one.
https://acrobat.com/#d=jr0XffvBZWXd0cVhL0OQ3A
I totally understand that I have to check the checkbox "Include Header Row in Subsequent Pages".
My problem is that, although I can see that checkbox, and it's not grey-out, I can not tick it. See below screenshot, with the red-cycle mark.
You can try with above file.
Just wondering why such weird behavior happened.
-Vicky

Flash CS6 does not publish for iOS with ANE included

Hi,
I'm creating a game to run on iOS devices and one of the game requirement is for the device to vibrate on some action.
I added the Vibration.ane file (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html) into the library path in Flash CS6 and also added the extension ID to the XML file. However when I publish the Flash file to check on device, I only keep seeing the "Publishing" loader bar. I've even waited for over 15 mins for it to complete. I get no error, nor does the PC hang, but I can't seem to publish my .app file for device testing.
Also I assume we can't test Vibration functionality with the Simulator that opens during desktop testing. I get the error "The content cannot be loaded because there was a problem loading an extension: Error: Requested extension com.adobe.Vibration is not supported for Windows-x86."
Would appreciate help.
Thanks,
Mariam

IPA is ok at the CS6 flash' standard 3.2 export, just tried the new AIR 3.3 also - no problems. I just included the Gyro ANE file, not the SWC
However, because the adl still does not want to preview this thing, development/testing the Gyro stuff is difficult...
I discovered the accelerometer is something different however. Adobe's little remote control thingy on which you can simulate phone position and multitouch emulates the accelerometer, not the Gyro. The Gyro extension taps in to a piece of hardware which really displays the position of the device, not the movement it's been receiving.
Maybe obvious but I thought I'd post this little find, after a day of testing and exporting, syncing, ... this was a tiresome experience...
After all this I can advise to sync the .ipa's with xcode though, instead of iTunes. This works MUCH faster (if you're on mac). Just run xcode, pull up the 'organizer window', select your device and go to the subbranch ' applications'. There you can add the .ipa by clicking on the '+' button

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
Thank

The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents.

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View > Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents. Where else can I find this command?

What version of Acrobat do you have? This feature is only available in the Pro version, not in the Standard version.

On one of my computers, the tool bar includes an icon for radio stations and a calculator, but those do not appear on my other computer. Are these add-ons? How do I add them to my other computer?

When I downloaded Firefox 4 on my desktop, it included an icon for radio stations, for the weather and a calculator. I don't remember choosing them. I also downloaded Firefox 4 on my netbook, but these same icons are visible. Can I add them?

These may well be add-ons, look at what you have installed
* use '''Firefox button'''(orange tab top left) ''' -> Add-ons | Plugins/Extensions''' <br /> that is the add-ons manager, and also allows you to search for other addons
* see also [[customizing firefox with add-ons]]
Some of the icons could also be bookmarks, note the bookmark toolbar does not display in Firefox 4 by default to get it back
* use '''Firefox Button -> Options -> [x] Bookmarks Toolbar''' <br /> that is assuming you have bookmarks in the bookmarks toolbar folder (should have some defaults like 'most visited')
Some add-ons may not be compatible with Firefox 4, but revisions may be issued that work, or alternatives with similar functions may be available.

I installed iCloud on to a pc. The shorts cuts did not include notes. Is there a way to have a short cut for notes or do I need to logon to icloud every time to use notes on my pc?

I installed iCloud on my pc and the short cuts did not include notes. Is there a way to create a short cut for notes or do I have to logon to iCloud every time I use notes on my pc?

Open the Mac App Store on your MacBook Pro
Hold the Option key and click on “Purchases”
Hold the Option key and click on “OS X Lion” from the purchased app list
“Installed’ should now say “Install” which allows you to download OS X Lion.
This assumes you are using the same Apple ID on both computers.
Lion does not get installed on an iPad. It runs iOS.

Include not trigerred for BADI BADI_ORDITM_CHANGE

Similar Messages

Maybe you are looking for