Include-owa and character escaping

Hi.
We are using include-owa to return user entered databse text within well formatted tags.
Sometimes text contains & and other XML characters.
We then "get XML returned from PLSQL agent was not well-formed error"
How can we easily escape all text values returned?
Thanks
Lionel

Normally you can enclose the text in the CDATA element.

Similar Messages

SSO for MS outlook, OWA and Sharepoint using SSO 2.0

Hi,
We have installed the secure login server 2.0. And configured SSO for SAP (ABAP, JAVA) systems using X.509 certificate. it is working fine.
We want to configure SSO for some non SAP applications like MS outlook, Outlook Web Access, Sharepoint.
I dont see any documentation in the implememntation guide of NW SSO 2.0 for how to configure these non sap applications to accept X.509 certificates.
Anyone please share the details of how to configure SSO for MS outlook, OWA and Sharepoint
Regards,
Yogesh Kumar D

Hello Yogesh,
Secure Login Server generates short lived certificates, this means after a configured time (or even
after an logout, because the Secure Login Client does not persist the private
keys in the file system) the private key and certificate is gone.
So using this for long term encryption is not practicable (because decryption
will be very very hard after a certificate/key renew...)
For a signature only solution the problem would be the signature validation, because it needs the
public key/certificate from the signer. This is usually included into the
PKCS#7 signature format, but its not guaranteed (depends on the application settings as example in outlook etc.). So this would be theoretically possible, but unlikely.
For long term encryption/signatures you need persistence certifkate/keys.
So thats the reason there is not documentation about that use case in Secure Login Server.
best regards
Alex

Why does CS6 InDesign Book epub output generate and apply new graf and character style names in CSS?

I created an InDesign book composed of documents that had had no paragraph or character styles in the palettes until text was copied over from a single overall document. I worked absolutely as clean as I could.
I synchronized the book to that single overall document several times, including immediately before exporting the book to epub. My export settings disallowed any local formatting. Character styles were restricted to one named "Italic" for which the only format applied was Italic in the Font Style field, and one named "Small Caps" for which NO formatting was included in the character style.
There was, as far as I can see, no reason for any character or paragraph styles to export to anything but identically-named CSS entries. That is to say, any text with the character style "Italic" applied in the InDesign doc should have output with the same text with a span class entry of "Italic" around it.
I still ended up with p and span CSS entries with extra numbers appended to them:
span.Italic {
font-style:italic;
font-weight:normal;}
span.Small-Caps-1 {
font-variant:normal;}
span.Italic-1 {
font-style:italic;
font-weight:normal;}
span.Small-Caps-2 {
font-variant:normal;}
span.Italic-2 {font-style:italic;
font-weight:normal;}
span.Small-Caps-3 {
font-variant:normal;}
span.Italic-3 {
font-style:italic;
font-weight:normal;}
and
p.x-SECTION-BREAK, p.x-SECTION-BREAK-1, p.x-SECTION-BREAK-2, p.x-SECTION-BREAK-3 and so on.
Why would the InDesign epub output engine choose to generate and apply new spans and paragraph-level styles, which multiply the complexity of editing the CSS directly? How can I prevent InDesign from doing this?

Perhaps I wasn't clear. When I wrote "an InDesign book composed of documents that had had no paragraph or character styles in the palettes until text was copied over from a single overall document" I meant to emphasize the part where I CLEARLY said "UNTIL text was copied over." The text I copied over had plenty of paragraph styles. I was trying to point out that each individual document had no PREVIOUSLY EXISTING character or paragraph styles that might have added complexity to the epub output. .
So, every paragraph in each document had a paragraph style attached, a total of maybe 20 different paragraph styles throughout the book. The only CHARACTER LEVEL styles I cared about exporting were Italic, for text that was set in italic, and Small Caps, for CAPITALIZED text that I wanted to be able to make smaller in the CSS, since I am not allowed to embed fonts and therefore have no other way of creating small caps in the xhtml files inside the epub.
So, given that I had two character styles applied to various bits of text throughout my InDesign book ("Italic" and "Small Caps"), I would like to know why there are multiple CSS entries generated: Italic, Italic-1, Italic-2, Small Caps, Small Caps-1, Small Caps-2, and so on.
Ditto paragraph styles. I had a paragraph style called "SECTION BREAK" in each document. Not only did paragraph style "SECTION BREAK" contain identical specs in each document--I know they did because I copied each from one single doc where they were being used identically--but I also synchronized the book repeatedly. So why would the xhtml docs and the CSS output need p.x-SECTION-BREAK-1, p.x-SECTION-BREAK-2, and p.x-SECTION-BREAK-3?

Smartforms/Smartstyle How to create/upload paragraph and character formats

Hi Folks,
I am working on a demo IDES system. In my ECC 6.0 system, the paragraph formats were not included. How can import or include or create or upload paragraph and character formats in order to create smartforms and smartstyles.
Waiting for your answer................
Thanks,
Creasy Matt

If you Ran Smartstyles T-code and from Utilities you should got all information how to do all these activities.

How do you get a word and character count of a document in Pages for Mavericks

How do you get a word and character count of a document in Pages for Mavericks?

Hi jonathan,
I struggled with this one as well, as i'm finishing up a PhD thesis and word counts are incredibly important. Through trial and error i found out that words like 'e.g.' and 'i.e.' count as two words and an ampersand (&) doesn't count at all. That being said, i didn't like the fact that the word count always included footnotes and i was dismayed that i couldn't get an accurate count of words in the main body of my text. That all disappeared yesterday when, by chance, while i was copying a completed chapter and pasting it into my main document, i discovered that Pages can indeed give you an accurate word count excluding the footnotes! Here's all you need to do:
1. In pages 5.2, make sure that the Word Count function is first enabled by selecting View --> Show Word Count from the Pages Menu Bar. (If it's already enabled, it will read View --> Hide Word Count, so if that's what it says, then no need to do anything.)
2. Once enabled, check the Word count that's currently showing at the bottom of the page. That's the word count including your footnotes.
2. Now, place your cursor anywhere within the current document, then hit command+A (for Select All).
3. Viola! Your word count now shows the actual number of words within the body of the text only, excluding footnotes!
Hope that helps!

Paragraph and Character styles in Fireworks

Hi
i used fireworks for a while, when it was still macromedia product, glade to see all the improvments in CS5.
i used Photoshop to create a very specific prototyping (including all CSS properties) of my website, but when i come to prototype the rest of the pages i totaly lost control, than i realize Photoshop is not the right tool for prototyping a whole website.
fireworks shuld be the answer of my prays, as i could read in the articles, in CS5 you can set all properties for text and fireworks will export it as CSS file, than al you have to do is copy and paste code according to your CSS structure, that grate time saver.
but one thing is really betters me, you cant do really good prototyping if you dont have the ability to create a paragraph and character styles (as you would with InDesign)
can fireworks create styles in the level of Indesign? and if not, what is the right workflow between Fireworks and Indesign?
Thanks
S

Window > Find and Replace will enable you to change all the instances of a text color in the entire document.
You can create your own character styles by saving them in the Styles panel. To do this, click on an instance of a style you want to save, and then on the little down arrow at the top right of the Styles panel to open the New Style menu. Select which characteristics you want to save, then click the OK button to close the panel. To apply your custon style, select the object you want to apply it to, then click on your custom style.

Best way to Securely publish OWA and Active Sync

Hi Guys
Just a quick question what is the best way for me to securely publish OWA and Active Sync in Exchange 2013, I have 1 CAS server and one MB server both on my lan but i have 443 open to internet and would like to make it more secure by putting maybe a reverse
proxy or OWA device in my DMA, my setup is small sub 200 users so cost is a factor, what is the most economically way for me to do this with the least amount of work and complication
I know ISA/TMG is now extinct and i dont want to use any linux reverse proxies etc.. just a simple solution that will publish these services securely that is easy to support going forward and inexpensive.
Thanks in advance
Spudney

What exactly are you looking to secure? If all that you have open is TCP 443 that is a tight setup already.
You'll have to state the business requirements you are looking to address - and for a 200 user org I suspect that they will be very different from a large enterprise.
Take a look at this pls:
http://blogs.technet.com/b/exchange/archive/2013/07/17/life-in-a-post-tmg-world-is-it-as-scary-as-you-think.aspx
And say hello to Renton as well please!
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013: how to set up multiple domain for OWA and ECP

Exchange 2013 on Windows 2012R2
Currently we have set this up using the guide below:
http://mouzzamh.wordpress.com/2013/02/04/accessing-owa-from-multiple-domain-url/
We can access OWA and ECP using the internal IP address/owa or ECP but when we use the URL it fails.
We gave it an external IP address as well just to check if it will externally since the external DNS are pointing to the correct records: same issue it only works on IP address/owa or /ecp
We were able to follow the guide from start to finish including the certs..
The only difference on the guide and our exchange IIS environment for the new website is when he mentioned "Under IIS Settings / ISAPI and CGI Restrictions" we only have "ISAPI filters"...." ISAPI and CGI Restrictions" is only
applicable to the default and backend website..
Also, when the guide points to the path, should it be the new website path?
Or maybe to avoid confusion, can anyone guide me on how to do it or any other guide that helped you if ever you had the same issue as mine?
Thanks.

Hi,
Please run the following to check your OWA virtual directories for all web sites:
Get-OWAVirtualDirectory | FL Identity,*URL*,path
Personal suggestion, please consider to deploy another new CAS server. Then we can configure different OWA URLs in different servers. And pointed mail.domain.com and webmail.domain.com to two CAS servers respectively.
Regards,
Winnie Liang
TechNet Community Support

Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount 28

Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports.    A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report    with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadj

export all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
    app.select(myImage[i]);
    var MyImageNmae = myImage[i].itemLink.name;
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
    app.jpegExportPreferences.exportResolution = 300;
       app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
    alert(myImage[i].itemLink.name)

What is diff b/w Include Structure and Append Structure at Database Level

Hi Experts,
Could you please let me know what is the main difference between .Include Structure and .Append Structure at SE11?
Thanks in advance and for good answer will give good points.
Sekhar

Hi,
1. Append Structures
Append structures can only be assigned to a single table.
Append structures are created in the custome rnamespace ( ZZ or YY)
In case of new versions of the standard table during upgrade, the append structures are automatically appended to the new version of the standard table
Append structures can not be used with cluster and pool tables
Append structures are created in transaction SE11. Display the standard table fields and press the Append structure button.
When you press the button, SAP sugests a name for the new append structure. After you has accepted the name,
a screen will be shown where you can enter the new fields.
Remember to activate.
2. Customizing Includes
Some of the SAP standard tables contains special include statements called Customizing includes. In contrast to Append structures,
Note that customizing includes are created by SAP, but the customer supply the fields for the include.
Customizing includes begin with CI_ and is part of the customer namespace
One Customizing include can be inserted into more than one table.
You can find Customizing includes in SE11 under structures.
Try to take a look at table RKPF which uses the Customizing include CI_COBL (In an IDES system). Next try to add a field to CI_COBL, and activate it. If you go back to table RKPF you will se that your new field has been added.
Regards,
Ferry Lianto

Running the report in Bitmap and Character mode

Hi,
We have the reports which can run in both the character mode and Bitmap mode. The only problem I'm facing is font size in the character mode report. If the report is run in Character mode then the font size of the report will be greater. As the sizer is bigger, I'm getting the X symbol in the place of report. Can i reduce the size of the font. I'm using the font Tahoma (8 points). Reports 6i Version and Windows Xp is the OS.
Regards,
Alok Dubey

Hi this may solve u'r problem
In Oracle Reports Designer, bitmap mode, you can make "C"
bold and in a different font and point size than "c". This
is because you are generating postscript output.
Postscript is a universal printer language and any
postscript printer is able to interpret your different
design instructions.
In Oracle Reports Designer, character mode, the
APPLICATIONS STANDARDS REQUIRE the report to be designed in
ONE FONT/ ONE CHARACTER SIZE. Character mode reports
generate ASCII output. In ASCII you cannot dynamically
change the font and character size. The standard is in
effect so a report prints as identically as possible from
both conventional and postscript printers.
by....
stanma

Script needed to generate a list of paragraph and character styles from the Book Level

Hello,
I am using FrameMaker 11 in the Adobe Technical Communication Suite 4 and I need to find a script that will generate a list
of paragraph and character styles from the book level.
I am working with unstructured FrameMaker books, but will soon be looking at getting a conversion table developed
that will allow me to migrate all my data over to Dita (1.1 for now).
Any thoughts, ideas on this is very much appreciated.
Regards,
Jim

Hi Jim,
I think the problem you are having with getting a response is that you are asking someone to write a script for you. Normally, you would have to pay someone for this, as it is something that folks do for a living.
Nonetheless, I had a few minutes to spare, so I worked up the following script that I believe does the job. It is very slow, clunky, and totally non-elegant, but I think it works. It leverages the book error log mechanism which is built in and accessible by scripts, but is spendidly unattractive. I hope this gives you a starting point. It could be made much more beautiful, of course, but such would take lots more time.
Russ
ListAllFormatsInBook()
function ListAllFormatsInBook()
    var doc, path, fmt;
    var book = app.ActiveBook;
    if(!book.ObjectValid()) book = app.FirstOpenBook;
    if(!book.ObjectValid())
        alert("No book window is active. Cannot continue.");
        return;
    CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
    CallErrorLog(book, 0, 0, "** Book format report for:");
    CallErrorLog(book, 0, 0, book.Name);
    var comp = book.FirstComponentInBook;
    while(comp.ObjectValid())
        path = comp.Name;
        doc = SimpleOpen (path, false);
        if(doc.ObjectValid())
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, doc, 0, "");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "Paragraph formats:");
            fmt = doc.FirstPgfFmtInDoc;
            while(fmt.ObjectValid())
                CallErrorLog(book, 0, 0, " - " + fmt.Name);
                fmt = fmt.NextPgfFmtInDoc;
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "Character formats:");
            fmt = doc.FirstCharFmtInDoc;
            while(fmt.ObjectValid())
                CallErrorLog(book, 0, 0, " - " + fmt.Name);
                fmt = fmt.NextCharFmtInDoc;
        else
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "!!! Could not open: " + comp.Name + " !!!");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
        comp = comp.NextComponentInBook;
function CallErrorLog(book, doc, object, text)
    var arg;
    arg = "log ";
    if(book == null || book == 0 || !book.ObjectValid())
        arg += "-b=0 ";
    else arg += "-b=" + book.id + " ";
    if(doc == null || doc == 0 || !doc.ObjectValid())
        arg += "-d=0 ";
    else arg += "-d=" + doc.id + " ";
    if(object == null || object == 0 || !object.ObjectValid())
        arg += "-O=0 ";
    else arg += "-O=" + object.id + " ";
    arg += "--" + text;
    CallClient("BookErrorLog", arg);

My ipod touch is only partially functional, requiring multiple taps to do anything, with apps crashing. I performed all Apple troubleshooting steps, including reset and restore, but no change in symptoms. What should I do now?

My iPod Touch (4G, 8Gb) is only partially functioning, requiring multiple taps on icons to do anything, and apps are crashing often. There is a thin white border that appears around icons when tapped once, then I must tap twice to activate. (that's 3 taps for what used to take 1) I successfully completed all the Apple troubleshooting page steps, including reset and restore, but there was no change to its condition. What can I do now?

Now that I think aboput it further, You may have an Accessibilty feature turned on.
- Try triple clicking the Home button to see if that will allow access to the iPod so you can go to Settings>General>Restrictions to turn off all the Accessibilty features.
- If not then connect the iPod to your computer and turn off the features. See:
iTunes 10 for Windows: Accessibility features for iPod, iPhone, and iPadApplewill exchange broken iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help?

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help? Any other suggestions other than going to an Apple Store?

Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

Include-owa and character escaping

Similar Messages

Maybe you are looking for