Include the Scheduling Margin Key to the LOIPR02

hello Experts,
I am trying to find some details on how to include the Scheduling Margin Key(SAP1 in our case) to the IDOC before passing it to the
ME.
Please let me know if there is any standard way of achiving this.
We are using : SAP ME 6.0 and MII 14.0
Thanks in advance,
Pradeep D

Here is a document how to extend an iDOC
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80677e5d-dc79-2c10-b7bb-a7e99767c8f6?QuickLink=index&…

Similar Messages

The scheduling margin key 000 does not exist

Hi guys
There is query from my side please do help me out
to get a solution for the following query
i was asked to give schedMarginKey = 000 while creating
a material for MRP(material requirement Planning)
but if i give schedMarginKey = 000 and save this it shows the
following error
The scheduling margin key 000 does not exist for plant JOP1
is ther any transaction code to overcome this?
please do help me out in this!!
Regards
Jino.

Hi
You can miantain the schedule margin key using t.code OMDC.
reward points if useful
Thanks & Regards
Kishore

Schedule margin key

i am a beginner in SAP.
could some one tell me how to find the appropriate 'Schedule margin key'.
i was trying to create a new material under a new plant.
so while filling the 'Schedule margin key' tab what should i type,how can i find the appropriate schedule
margin key. what is the rule for that .when i type some value randomly ,the following message displays
the message says as " the scheduling margin key does not exist for the plant"
could some one can help me.
thanks
zuhair

Dear Zuhair,
1) As i already told you, schedule margin key is for defining floats or Production scheduler
2) Floats are basically calculated in Days
3) if you press F4 for the schedule margin key then u can see
4) float before production float after production release period
5) this are nothing but the days ( or extra days ) are given for production scheduler
for converting plan order to production order
6) and if we are maintaining floats ( schedule margin key ), then this will be copied to
production order. even scheduling considers this floats & calculates dates for plan order
Hope This Helps You
Regards
Madhu Kumar

MRP & schedule margin key issue

Hi All,
My client is running MRP on daily basis they have maintained schedule margin key 001 with opening period as 0010.but while running MRP & MD04 they
found below are the issues.
We have tested many times using SMK as 000 & 0010 but every time system displayed below errors.
Some times they are not getting the purchase requisition created in time (System should drop the purchase Requisitions according to parameters maintained in material master).
Some time system creates planned order instead of Purchase Requisition (Their requirement is to create purchase requisition always)
They get the exception message past due planned order
As per my understanding there will be problem in buffer period.How can we avoid these exception messages & how can we create always PR instead of pl order.
I will appericate if anybody suggest me how can we rectify above mentioned causes.
Thanks,
Ravindra.

Hi Caetano /Ram
Thank you for replies.I have following doubts on your reply
I understood if I create Variant including only PR system will display always PR in MD04.
1.If I run MRP using option 2 PR in opening period in this case system behave like same or do I need to include this parameter in variant
2.How can I avoid exception message"Past open due" for Ex :- 10,20,30 etc... permentaly in MRP run?
I have not tested solution yet I hope if I create MRP group & during background MRP run if I create variant with parameter 1 (PR only) it will create PR.
Can you pls assist on SMK? For your clarification check below is my actual scenario
if I assigned SMK with 000 (All periods like opening period,FAP,FBP & release period is 000) then what happen in MRP run if I made your suggested setting is system means it will always create PR.
If I assigned SMK with 001(opening period 0010,FBP 5,FAP 2 ,release period =5) also
if I maintained GR time= 2 days,
Pl.delivery time =10 days in this case will above setting work? if i run MPR using opening Period as well as PR only.
Kindly correct me if i am wrong.
Thanks,
Ravindra

Opening period (schedule margin key) in forward scheduling

Please advise whether opening period is used in forward scheduling that we specify in schedule margin key? if not, what will be the reason?

Hi,
Opening period is used only in Backword scheduling.
b'cause opening period is period of workdays deducted from the start date to determine the creation date of order.
reward points if useful to you.

Scheduling Margin key ( Float before production - Float after production)

Dear Expert ,
I maintain in material master float before and after production
When i rescheduling in house production in routing and display the result i found the time for float is calculated in Interoperation time
And I as i know Scheduled start & Scheduled finish determined the production dates only & FBefProd is time between basic start and Scheduled start and FAftProd is the time between Scheduled finish date & basic finish date
Why he put it there at the time it's not actually maintained in production date ?
Regards
Rami

Dear,
In the routing, click on scheduling result push button,
Here you can see how this interoperatioon time is calculated
how much is Float before and after production.
example-
schedule margine key - 001
float before production - 2 day
Float after production - 1 days
Routing data- for 1 qty - 24 hrs
After you schedule in routing and see the details of scheduling result, the following result
Basic start date - 30.11.2008
Basic finish date - 03.12.2008.
Scheduled start date - 02.12.2008
Scheduled finish date - 02.12.2008.
base qty - 1 TO
Processing time - 1 day
interoperation time - 3(all inclding floats)
Total inhouse production time - 4 days
Now repeat it for 2 qty, results are as below
Basic start date - 30.11.2008
Basic finish date - 04.12.2008.
Scheduled start date - 02.12.2008
Scheduled finish date - 03.12.2008.
base qty - 2 TO
Processing time - 2 day
interoperation time - 3(all inclding floats)
Total inhouse production time - 5 days
I hope you got the idea.

Make optional from material master of Schedule Margin Key

Hi PP Guys
I am using MRP Type PD & there is no floats in schedule margin key.
So client want make a optional of schedule margin key from material master.
I tried from L-G --> Material Master --> Field Selection --> Assign Fields to Field Selection Gruops / Mainatin Field Selectio to data Screens.
Bur here this filed is optional.
I think some relation from MRP Type or What ?.
Pls suggest.
Regards
Ashish

Dear Asish,
This is the required master data to create order also, based on this only all your order dates are calculated, like when to release the order, start and finish and finaly material available to dispatch.
So for MRP calculation and to promise the delivery to sale order also it is must.
When u create order this gets copied to the order this u can see in production order Genaral data tab.
i hope u r clear
sree

Schedule Margin Key behavior during External Procurement and Inhse Prodn

Hi Gurus
Could you give me detailed illustration in a visualising manner the Application of Schedule Margin Key in
"External Procurement for Raw Material" and "Inhouse Production for Production Order" with one scenario
Stating each and every floats in more detail
a) Opening Period -applicable for ext and inter
b)Float before prod-applica only for external

Hi,
The complete explaination for your requirment is available in help.sap.com, under MRP-->scheduling section
Regards,
Nataraj

Configuration of Scheduling Margin Key

Good day!
Where can I add a "scheduling margin key"?
Thanks!

Hi,
There are many paths for defining the same;
Go to path SPRO > Materials Management > Consumption-Based Planning > Planning > Define Floats (Scheduling Margin Key) and add it for your Plant.
Also you an add it in path SPRO > Production > Material Requirements Planning > Planning > Scheduling and Capacity Parameters > Define Floats (Scheduling Margin Key)
Also SPRO > Production > Shop Floor Control > Operations > Scheduling > Define Scheduling Margin Key
Also you can maintain under transaction OPPQ for you Plant under "Floats" button.

Where is the underscore _ key on the palm treo 680

where is the underscore _ key on the palm treo 680
Post relates to: Treo 680 (AT&T)

If you hit the BLACK button between the letters A, S and Z and then hit the letter S you will get a dash sign, then all you have to do is hit the ALT next to the letters N, M and drop down menu button. From there you can select all the character that you want including the underscore sign.
Message Edited by IrreducibleM31 on 11-06-2008 01:50 PM

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Thanks

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks

Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

To set the short cut key for the menu when using CommandDesign pattern

Hi All
I have a menu File which has two menu items Load and save.
Here for implementing the actionperformed iam using the command design pattern.
Now iam not able to set the short cut key for the menu item......
Please help me..............
Thanks
Arch

The Java Tutorials: [How to Use Menus|http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]
db

Reinstallation of adobe acrobat pro using the same license key on the same machine.

How to reinstall Adobe Acrobat pro using the same license key on the same machine.

Is it currently installed and working?
Installed and broken?
Or on a wiped machine, nothing there?

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ?

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ? My old mac is deleted ...

We would need to know the version of Mac OS you are running and the version of Photoshop you want to install.
The serial number is the tricky part. If you have no idea where you placed it and did not register your product with Adobe, your chances are very low of retrieving it.

Include the Scheduling Margin Key to the LOIPR02

Similar Messages

Maybe you are looking for