Include whole page graphic in sapscript

Dear experts,
I need to use a template in a sap script, and write some stuff over it. I thought of importing it as a graphic, and include it in my MAIN window, but it comes out very small, even though I play with the resolution.
I need it to take all the space of an A4 paper.
Is there maybe another way of doing it?
thank you in advance.
Roxani

Hello Rich ,
By making text in gray scale we can make watermark in SAP Scripts.But I am facing a problem,I can display watermark but when it is overlapping with the line items, the lines are not able to print but data is displaying.
In simple way when the graphic image overlaps with the lines ,the lines are not able print out.
Is there any solution in SAP Scripts the lines can display over the watermark.
Please help me.
Thanks and Regards,
Dhanraj

Similar Messages

Can't print a graph on the whole page in landscape

Hello!
I have XY graph that I want to print on the whole page in landscape orientation (paper A4).
On the screen the graph is small, so I do resizing, appending image to report, and then printing.
After sending it to the printer I get preview (from the printer software) and see that the graph uses only approx. 5/6 of the page in the width, in other words the height of the graph takes the whole height of the page (21 cm) and the width of the graph leaves 5 cm of the page unused.
I tried to change the width and the height of the plot area to get proper ratio, but in vain.
If I set the height of the graph too large it goes beyond the page, but whatever I write to the width I always get 5 cm of the page unused on the right side. (not including 1 cm of the margin).
Note: surely, if you set small width you can get more space of the page unused, I'm talking about increasing the width of the graph.
Any ideas?
See attached for the vi. I tried to save it for 7.1 version but it can't, so you'll need LabView 8.0 to check it.
Also in attached you can find the page preview I get before it goes to printer.
Thanks in advance.
Rashid.
Using LV 8.0 Pro on WinXP with printer Canon PIXMA iP1000 (also tested on HP printer, but I think it doesn't matter).Message Edited by Rashid on 06-06-2006 07:09 AM
Attachments:
Graph printing out.vi ‏40 KB
Report preview.png ‏48 KB

Rashid,
It could be that you would need to install the entire LabVIEW 8.0.1 update rather than just the updated Run-Time Engine (RTE). Here is a link to the 8.0.1 update. If you download and install this version, you can then use the utility to mass compile or compile when you are prompted.
Repost if you have more questions!
Andy F.
National Instruments

Dante font used in manuscript - when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

Dante font used in manuscript … when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

OK, we've got it!
What is happening is that when you use Microsoft's save as PDF in Word, the font isn't embedded even though the font is tagged to allow embedding. Furthermore, Microsoft doesn't properly put the font name into the PDF file such that Acrobat or Reader can readily find the font installed on your system such that the text can be properly displayed and/or printed. Acrobat and Reader attempt to display and/or print the text using a “substitution font” and of course, as they say, YMMV (“your mileage may vary”)!
I personally submitted the report of this problem (both the embedding and the font name problem) to Microsoft. They acknowledge the bug, tried a fix and provided me a build with it, but it wasn't right. Maybe they will ultimately fix it, maybe they won't. We don't know yet. We do know that if it is fixed, it will be fixed only for Office 2013 (problem occurs with all Office applications since they use the same PDF generation code) and thus such a fix won't help you.
Adobe Acrobat Standard and Acrobat Pro both provide an Adobe PDFMaker plug-in to Office applications (including full support for Office 2010) that adds an Acrobat Toolbar as well as a Save as Adobe PDF menu item. The resultant PDF file fully supports embedding of OpenType CFF, TrueType, and Type 1 fonts and in many other ways produces much superior PDF with a full range of PDF generation options not available with the Microsoft PDF. (Note that beginning with Office 2013, Microsoft does not support Type 1 fonts in Office documents at all, even for existing documents!) The Acrobat Office functions are widely used and respected in the end user community and whatever “issues” there are (all software has “issues” of some type - it is a matter of how many and how severe), you should be in much better shape for PDF production that with what you currently are using.
Good luck and let us know if this resolves your problems. (Note that you can download and install a free fully-functional 30 trial of Acrobat Pro to assure that it meets your needs! You can then buy a license and activate what you already have installed.)
- Dov

How can I take a screen shot of the whole page in iweb

Hello all, Happy Saturday.
I want to take a screenshot of my entire page but I only see a part of the page on the screen. How can I display the whole page at once in order to make a thumbnail image?
Thank you in advance for I know someone will have the solution.
Mireille

Well, let me see here....on page 114 of the L3 handbook it says specifically that I'm not supposed to share this with L2s and below....hahahaha....just kidding. Actually, I'm sure that this kind of graphic posting is frowned upon here, but I just couldn't resist...
Here's the code to do this sort of thing...
{a href="http://www.dirtdoog.com" target="_blank">{img src="http://homepage.mac.com/jwtseng/MyWorld.jpg" width=200 title="Click to visit My World!">{/a>
Replace all the "{" with "<" and you'll be set to go...

How to set selecting a page to whole page instead of sections?

Hello all and thanks in advance for the help.
I have users that are on acrobt 9 and we have to print to image our documents so they can not be modified and we submit them. I have 5 users that use this feature and the new users that print to pdf (with print to image selected) their documents, once they are opened, and you click on the page it selects sections of the page instead of the whole page.
I would like for once they are printed to pdf with print to image selected, and you open the document and click on the page for the whole page to be highlighted in blue when I click on any part of the page. The new users have the page divided up into 8 sections.

Unfortunatelyly this image splitting seems to be something WORD 2007 and 2010 do to information sent to the Adobe PDF printer. I have no idea why, but it seems to be what is happening. This has been an issue ever since the new versions of WORD were released. The result does not occur with WORD 2003. Unfortunately this does not provide you with a solution, but may explain your problem to some extent. As far as I can tell, it is a quirk of MS Office. It is interesting that when you use the PDF addon from MS, the graphics are fine. However, the plugin may not be able to obtain a graphic PDF as you want.
An alternative (not normally recommended) is to print the PDF you have to another PDF with the print as graphic selected. That one may give you full page graphics like you want. Unfortunately this is an extra step.

Since I updated my Mac with iOS 7 I continually have pages open that get pixelated, either the whole page of parts.What can I do to fix the problems?

Since I updated my Mac with iOS 7 I continually have pages open that get pixelated, either the whole page of parts.What can I do to fix the problems?

Hi Peter,
The results:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:3:27
Disk Information:
          Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 319.21 GB (121.43 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Dell Dell USB Keyboard
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
          Microsoft Microsoft Wireless Optical Mouse® 1.00
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.Cycling74.driver.Soundflower          (1.5.1)
          com.sophos.kext.sav          (8.0.14)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.sophos.autoupdate.plist
          [loaded] com.sophos.intercheck.plist
          [loaded] com.sophos.notification.plist
Launch Agents:
          [loaded] com.sophos.uiserver.plist
User Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.plexapp.mediaserver.plist
          [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          Safari
          iTunesHelper
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          Perian
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          Google Earth Web Plug-in.plugin
          iPhotoPhotocast.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              13%          Microsoft Word
              11%          InterCheck
               4%          WindowServer
               1%          Dock
               1%          com.apple.WebKit.Networking
               1%          sharingd
               0%          Safari
               0%          Microsoft Excel
               0%          Plex Media Server
               0%          mdworker
Top Processes by Memory:
          197 MB             Microsoft Word
          139 MB             WindowServer
          123 MB             InterCheck
          82 MB              Preview
          82 MB              com.apple.IconServicesAgent
          78 MB              talagent
          74 MB              com.apple.WebKit.WebContent
          70 MB              Mail
          66 MB              Microsoft Excel
          49 MB              Messages
Virtual Memory Statistics:
          1011 MB            Free RAM
          1.62 GB            Active RAM
          651 MB             Inactive RAM
          651 MB             Wired RAM
          311 MB             Page-ins
          0 B                Page-outs
Regards
Kym

Display graphics in sapscript

Hi All,
I am not able to display graphics in sapscript of 4.6b system. Please
clarify.
Regards...

Hi,
Here is what I did to create and include a logo in a SAPScript form (4.7)
A. Created TIF image of the LOGO and loaded logo into SAP
CREATING LOGO: (I used only PAINT and Kodak Imaging for Windows)
1. Create LOGO in Word
2. Capture with Hyper-Snap (that?s a screen capture package) and put into PAINT
3. Save PAINT as BMP, as type:?24-bit bitmap? (this is the only way it worked)
4. Open bitmap in Imaging for Windows
5. Save as TIF
Note: Have to play around in PAINT to get the right logo size
LOADING LOGO INTO SAP
1. Run RSTXLDMC
2. Fill in the following parameters:
3 Filename: Path and name of the TIF file (it?s on your PC)
4 Type: BMON (default)
5 Resolution for grapic (dpi): 600
6 Graphic resident on printer: OFF (default)
7 Text Name: ZHEX-MACRO-LOGO-PHAC (whatever)
8 Everything else: default
Cheers.......

Print whole page

I use the Canon Pixma MX922 I want to print the page and include the pictures. It just wants to print the text. Done tried several things "print all" etc. Still will not print the whole page. I am sure this is a setting somewhere it use to print the whole page but there are three of us using the printer and I don't know what has been changed.
~
Printer: Canon Pixma MX922 WiFi
Camera: Canon EOS Rebel T2i
Windows 7 Pro
Firefox 31.0

Hi Ghostmaster,
Let's make sure that your PIXMA MX922 is working correctly:
1. Make sure that the machine is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder or the Cassette.
3. Open the Paper Output Tray and then open the Output Tray Extension.
4. To print the nozzle check pattern:
     4-1. Press the MENU button.
     4-2. Press the Setup button.
     4-3. Select Maintenance, then press the OK button. The Maintenance screen is displayed.
     4-4. Select Print nozzle check pattern and then press the OK button. The pattern print confirmation screen is displayed.
     4-5. Select Yes and then press the OK button.
The nozzle check pattern is printed and the pattern confirmation screens are displayed alternately. Please compare your printout to the example that has been attached to the bottom of this post.
If they differ, perform a few cleanings. Please perform the following steps to perform a Cleaning:
1. Press the MENU button.
2. Press the Setup button.
3. Select Maintenance then press the OK button.
4. Select Cleaning and press OK.
5. Press OK to select Yes.
The cleaning will be performed. After 2 or 3 cleanings, print another test page.
Does the test page print correctly?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Somehow hyperlinked whole page, now navigation bar doesn't work

I was trying to add a hyperlink to the bottom of my page, and somehow made the whole page the hyper link. Now my navigation bar doesn't work. When I scroll with my mouse to show me if there is something hiding the navigation bar, the whole page including the navigation bar seems to be one image. How do I fix this? I tried starting a new page, but have trouble formatting the columns properly again. HElp??? if you want to see what I'm talking about, its the Resume page that has the inactive nav bar, and the Resumee page that I can't format right... http://web.me.com/lauren.kelly

Just checked the Resume page and the entire page, except for the navbar is a link to download your resume as a Word document. The file didn't have an extension but I added the .doc extension and it opened in Pages as a Word document.
If you don't want the document to be downloaded check the page in iWeb to see if you see the hyperlink icon somewhere on the page. Select the object it's attached to and use the Inspector/Link/Hyperlink pane to remove it as a link.
The links in the navbar are working as they should. It's just the body of the page that has an "unwanted" (?) link.
OT

Grab Whole Page

Hi,
I'm wondering whether it's a tool to grab a whole page instead of grab in "Window, Selection, Screen..." ? Is there any tool to grab the page included the downward page that you need to scroll down and see?
Thanks.

JPG is not provided for that!!
What does that statement mean? That you can't grab an entire web page as a screen shot because part of the page can't be shown without scrolling?
If so, I already stated how to get the entire page above as a Web Archive.

TOC Links won't open New Window, Whole Page

RoboHelp HTML 11, Internet Explorer 11. Multiscreen HTML5 layout.
I'm trying to experiment with the different ways of opening links: New Window, Whole Page, Same Frame, etc.
Yesterday the different variations worked the way they should, but today every link in the TOC opens as if set to "Default (none)".
As for Links on topic pages, "New Window" opens a new tab, and "Whole Page" seems to go to Default (including the sidebar, which I gather should not be there).
Any ideas?
-- Shawn

Hi,
Responsive or Multiscreen?
For the HTML5 version, the frame options for links won't work.
New Window should open a new tab. That is as expected.
The rest will work like a regular link.
The frame options really are just for WebHelp only. And only the new window and whole page make any sense.
Kind regards,
Willam

How do I include a page from web search into an Email?

I have a HP TouchSmart 610-1147c Desktop computer. running Windows 7 64 bit. I should have known the answer to this question years ago, but I don't....terrible huh? Anyway, how do I include a page from a web search that I did into an Email? Believe it or not, I've never had to do this before, so don't have the faintest idea how to do this. I have a feeling that it would be sent as an attachment, but how don't know how to do that!!
I would appreciate any help that anyone would take the time to give me. I thank you beforehand for having patience with me and my silly question.
Auntie CC
This question was solved.
View Solution.

Well, the way I would do it is to copy and paste the web address in the email, so the recipient can click on the link and get right to the Web page.
For example, I just googled "horses," and here is the result of that search:
http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=horses&oq=horses&aq=f&aqi=g4&aql=&gs_l=h...
I highlighted the Web address, copied it, and then pasted it in the response. Same thing can be done into an emial.
Does that make sense? Or were you looking for something else?
GeorgeFN
GeorgeFN
I work on behalf of HP.

When I AirPrint it only does small portions of the page. How do I get it to print the whole page?

When I AirPrint The printer only prints a portion of the page. How do I get it to print the whole page.

It would help if you stated what printer you are using and what application you are doing the printing from. Also, what are you printing?

Not printing the whole page

the printer is not printing the whole page it is cutting the right side
hp photosmart 7520

My HP Photosmart model 5520 is only printing part of a page.

How to refresh a portlet without refreshing whole page?

hi
I have 3 jsp portlets on a page. Now, I can write some javascript code in a jsp and refresh it after a predetermined interval of time.
If i do this with the jsp portlet the whole page will get refreshed which is not something i want to do. i want only that jsp portlet to get refreshed.
Is it possible?
This actually is like having yahoo mail and hotmail both of them on the page and working with both of them simultaneously. Is it possible using portlets.
Pl. help
null

Hi Little Foot,
I think it is because I use a simple input button (created manually in the code), and you use an apex built-in submit button, so it submit the page.
But since I posted that solution, I have found a better way, that allow me to get upload status, it is very simple :
Create a file browse item :
Name : P3_FILE_BROWSE
Storage Type : Table WWV_FLOW_FILES
Post Element Text : <div id="upload_status"></div>
Bind event on the element that will trigger the upload
$('#your_element').click(function(){
     if ($('#P3_FILE_BROWSE').val() != '') {
          $('#wwvFlowForm').parent().append('<iframe id="upload_iframe" name="upload_iframe" style="display:none;"></iframe>');
          $('#upload_iframe').unbind('load').load(function () {
               /* upload finished, so here you can do what you want with the uploaded file
               $('#upload_status').html('<img alt="" src="'+IMAGES_PATH+'ajax-loader.gif" style="height:28px;width:28px;" /> file processing...');
               //do what you want with the file
               $('#upload_status').html('')
               $(this).remove();
          $('#wwvFlowForm').attr('target','upload_iframe').submit().removeAttr('target');
          $('#upload_status').html('<img alt="" src="'+IMAGES_PATH+'ajax-loader.gif" style="height:28px;width:28px;" /> uploading file...');
});It automatically create the hidden iframe, submit the form into it, tell the user upload is finished, and remove the hidden iframe.
your_element can be a button, an image, etc...
Hope it can helps !
Yann.

Include whole page graphic in sapscript

Similar Messages

Maybe you are looking for