Include xi integration process statistics into slr report

Hi,
I have XI 3.0 and Solution Manager 7.0 EHP1. Is there a possibility to add statistics about integration processes (these are visible under SXI_CACHE -->Integration Processes) into SLR report? I have similar info in EWA report but I cant find a way to include ir into SLR also.
I.e. I need to get an SLR report stating certain integration process max and average runtime duration in milliseconds.
br,
erki
Edited by: Erki Hallingu on Dec 18, 2009 10:28 AM

Hi,
Probably based on the time that IDOC was processed and the the IDOC pushed from XI after processing at the receiver end you can get the time.
Or even in End-toEnd monitoring you caould verify.
If you will be talking about IDOC adapter then it will not be available in RWB that you need to verify in either SXMB_MONI or in IDX5 tcode.
Thanks
Swarup

Similar Messages

Error in Including Roll Up Process Type into Process Chain

Dear Experts,
On BI 7.0, I found an error, when including the Roll Up Process Type into my process chain. The sequence of my first process chain looks like this.
Start -> Execute Infopackage -> Execute DTP to load data to DSO -> Delete Cube Index -> Execute DTP to load data to cube -> Create Cube Index -> Roll Up
I found this error when activating the process chain
'No type "Delete Index" process can be in front of process "Roll Up of Filled Aggregates/BIA Indexes" variable ROLLUP_ZHRF_C04
Then, after looking through the forum, I found someone suggest using 'Initial Fill' before 'Roll Up'. I followed his sugguestion, so my second process chain looks like this.
Start -> Execute Infopackage -> Execute DTP to load data to DSO -> Delete Cube Index -> Execute DTP to load data to cube -> Create Cube Index -> Initial Fill -> Roll Up
The same message is shown; however, this time it just a warning message instead of the error msg.
1) How can I solve this problem?
2) In which sequence of process types I should take for my process chain?
3) Must I always use the Initial Fill before the Roll Up in the process chain?

Hello,
This issue is with patch 16 of BI. The only solution i think is you need to create a local chain with start process -> rollup and include all the roll up cubes in that variant and include this local chain at the end of the main chain. Hope this helps.
REgds,
Shashank

Integrating an Exisitng multiple page PDF file into a report and outputting as one PDF

Post Author: sditmer
CA Forum: Crystal Reports
We would like to be able to PDF files into a report based on a file name contained in the detail of the report. For Example, I have some data in our database relating to a specifc PDF file including the name of the PDF that I would like to print in the header of the report and then print the actual PDF as the detail of the report. The PDF may be multiple pages so I would like the remaining pages of the report to follow on each page of my crystal report. Essentially I am trying to merge a report header onto a mulitple page PDF file as a single report. Is this possible to do out of the BOX with Crystal? Do I need some other tools to do this?

Post Author: IdoMillet
CA Forum: Crystal Reports
Consider a 3rd-party tool as a solution (for a list of such tools, see http://www.kenhamady.com/bookmarks.html).My Visual CUT software allows you to automate the process of merging the pdf export of your reportwith a pdf file named based on a formula in the report. The resulting merged pdf file can automatically be printed or emailed.

POJO How to include a Image/Picture into a report

Hi All,
the POJO Data Source support works fine but how can i include a image/picture into a Report ??
My Pojo contains a Blob and a byte[] but if i trag 'n' drop it onto the report design surface (myReport.rpt), C4E creates automatic fields for me but the Blob and the byte[] does not become available for reporting.
In the application i would like to move a image into the blob or into the byte[].
What is wrong ??
Thanks a lot for Your help
René
MY POJO
public class RhuPlakatData {
private String text11;
private Blob blob1;
private byte[] bytes;
public byte[] getBytes() {
return bytes;
public void setBytes(byte[] bytes) {
this.bytes = bytes;
public String getText11() {
return text11;
public void setText11(String text11) {
this.text11 = text11;
public Blob getBlob1() {
return blob1;
public void setBlob1(Blob blob1) {
this.blob1 = blob1;

Hi James
Unfortunately, I found no solution.
Did You found a solution??
Thanks for Your help
Greetings
René

Process chain with ABAP reports included

Hello !
I need help regardin an issue.
I have a process chain with the processes:
1) Start
2) Process type ABAP program -> report that has a wait instruction
3) Process type ABAP program -> report that has a system message , based on a first variant of the report
4) Process type ABAP program -> report that has a wait instruction
5) Process type ABAP program -> report that has a system message , based on a second variant of the report
6) Process type ABAP program -> report that has a wait instruction
7) Process type ABAP program -> report that has a system message , based on a third variant of the report
report that has a system message : has 3 variants
The reports work each individual, but in the chain , when I execute, I must see some system messages and there is nothing
I assigned for the processes the right reports, including the variants for the processes 3, 5, 7.
Do you have some clue? I can't imagine why they don't work in this process chain.
Thank you.

In RSPC transaction -
create your process chain
To include ABAP program --- expand General Services --- Select ABAP program -
drag and drop it in right panel
Create process variant -
provide program name and program variant(if exists)

How to test ABAP mapping used in a Integration Process node

Hi,
anyone can suggest me how to debug an ABAP mapping used into a transformation node belonging to an Integration Process ?
Thanks.
Francesco

Hi, Francesco.
I've debugged ABAP Mapping with SXI_MAPPING_TEST transaction.
If you have creted a scenario including your ABAP Mapping, you only hace to put the correct sender/sender interface and receiver/receiver interface. You have to put some XML document as an input.
I wrote in my code the Break-point instruction an debugged the process without problems.
regards,
Francisco

3 errors in Step 6 (Correlation) of "Define Integration Process" Tutorial

Step 6 of the Define Integration Process tutorial:
http://help.sap.com/saphelp_nwpi711/helpdata/en/69/4ad13fa69a4921e10000000a1550b0/frameset.htm
has three errors in it:
a) item number is left out of the request correlation define steps (steps 9-10)
b) Item number is left out of the confirmation correlation define steps (step 11)
c) In step 14, the name of the correlation should be BookingConfirmation, not BookingCorrelation.
If item number is left out, or if the name of the correlation is entered incorrectly, the object will not activate.

I quite agree, JB - SDN is not the place to report SAP software bugs (although it is a great place to embarass SAP into fixing them after they've been reported to the usual suspects !)
But ... documentation bugs are not software bugs, and I think that the nature of documentation bugs, particularly in tutorials, makes SDN the perfect place to report them "officially".
After all, isn't documentation all about "outreach"?
And isn't SDN all about "outreach" too?
(Well, and "inreach" too, to the extent that SAP pays attention to what goes on here ...)
djh

End running integration process

How to end an integration process running and running? Due to having caused hundreds of messages there is no chance to get into work item display. The system hangs up when I'm trying to get into work item display. Now I'm searching for another possibility to directly stop or cancel the process. Is there any report I could use?

Starting or stopping the BPE.
SAP_XI_BPE_ADMINISTRATOR_ABAP
Whether the button for starting the BPE or the button for stopping the BPE is displayed depends on the status of the BPE. If an error occurs, both buttons are displayed and you must decide how you wish to continue. The individual steps for starting and stopping the BPE are executed in turn and the status of each step is displayed. The log for the individual process steps is displayed in the window area at the bottom of the screen.

Integration from xcelsius to Crystal reports 11.5.8

Hi All,
I am integrating my xcelsius dash board data to crystal reports 11.5.8 version
i had create new data connection in xcelsius i had passed all necessary parameter like headers,data.
after that i saved information, exported to Flash SW format file.
i had started my crystal reports i am trying to insert this flash file,
but my crystal reports doe's not having the flash enable in this version,
how to enable flash in crystal reports version 11.5.8. weather this version will support flash,
or is any different process do same Celsius data into crystal reports.
i am using version need to update any fixes

Unfortunately XI Release 2 (11.5) does not support flash.
Crystal Reports 2008 supports flash and xcelsius. Download a free trial here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx

Distribution Function - To split Planned/Process orders into 10

Have you used, or tried to use Distribution Function?
It is assigned to the Production version and we assumed that it would divide the Planned order/Process order by the % we have in customizing.
We have created a distribution function DV10 and assigned to our plant. This uses the standard function S30 which has 10, 20, 30, 40, 50, 60, 70, 90, 100 in % dur and % cap fields. So you would think the planned/process order would be divided into 10 parts
Reason u2013 if an order goes over multiple days we want the order to be broken down by day.
Why? So that Deployment, when looking at an ATP report in R3 for multiple materials in 1 location, by day or period of days, can see how much will be available each day
Problem with GLEI (equal distribution) is that if an order starts today at 22:00 then we have equal distribution, we then have 25,000 PAL available today and 25,000 tomorrow, which is not a fair proportion according to the time available. Therefore, we thought that dividing by 10, for example, we would have a more accurate proportion each day
Many thanks for any input, even if "tried and failed :("
Cheers, Paul

Hi Mario,
Thanks for your input. Today we use GLEI which equally splits the same planned or process order into equally daily quantities for ATP purposes. We also have created STRT which drops the Planned/process order quantity onto the first day of the order.
Regarding daily lot sizes this could be an option but I suppose you would then get individual orders, which the business may prefer not to do.
Cheers, Paul

On all my other apple devices my Icloud works. I have tride the hard reset idea, i have tried to delete my i clod account on he iphone, but nothing works. Why is the not an integrated process apple? How do i change my apple id and password to my new

Why is the update on Icloud setting not an integrated process Apple desingners! On my apple iphone 5, after new ipdate. My icloud on my iphone askes to back up. It still have my old id an password and I cant change it anywhere. I dont have that email account for a year now , and dont have the password of it. All my other devices shows my new apple Id and password. I cant change it at mannege my apple Id because it is the new one. Itune use the new one, but no, not my iphone. So, what do I do now?

You have to do the following to get your new Apple/iCloud ID signed onto your device:
1.     Go to Manage your Apple ID and change your Apple ID back to the old email address (do not verify it - this is temporary):
Apple - My Apple ID
2.     Go to Settings>iCloud, scroll to the bottom and Delete the iCloud account. Use your current Apple ID password when asked. Follow the prompts to delete the account
3.     Go back into Manage your Apple ID and change your Apple ID back to your new email address (you may need to verify it again)
4.     Go back to Settings>iCloud and sign onto iCloud with your new Apple ID. Turn on the options you want sync'd with iCloud, give it a little time to push the info down to your device.
Cheers,
GB

How to add a filter/selection into the report title?

Hi experts,
Currently I try to fugure out how to set up a field into the page header (title) of a report in order to dynamically adapt the title to selected filter criteria. I tried to use the Reprot Filter Summary, but since I do have several sheets in my reports the information given through it is not applicable.
What I would like to achieve is that the end user can select e.g. a category X and Y and the title says: "Report title - categories: X,Y" Somthg like this. I'd appreciate any tips.
Best regards

Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards

Handling fault messages in an Integration Process (bpm)

I have a bpm in PI 7.11 which performs a synch call to an external webservice. In addition to the request/response, that webservice can also generate two faults: ObjectNotFoundFault and generalfault. I am having trouble handling these faults - when a fault occurs my handler is not being invoked and thus the bpm process stops/errors. When I look at the underlying process (via txn swi1), I see the exact error text:
"No exception defined for fault message ObjectNotFoundFault http://www.companyb.com/services/olsa_v1_0/"
From what I understand within the bpm synch call step to the webservice I need to do the following to handle the exception/fault:
- put the synch call (to the webservice) into a block
- add an exception branch to that block named let's say A & set the exception handler of that block to be A
- in the exception setting of that synch step, select A
In my case, I don't care about the fault details other than to ensure it does not stop the whole Integration Process, so in my exception branch I don't do anything. I did try adding a control step within it too (as per SAP Press text book).
Is there anything else I need to do here? I am not mapping the returned fault - does the fault need to be mapped (not sure how I would do this given that the synch step uses an abstract interface and therefore to my knowledge no fault mapping can be done)?
There are 2 Notes that describe my issue exactly:
https://service.sap.com/sap/support/notes/1484903
https://service.sap.com/sap/support/notes/1158699 <-- this one refers more to me, but we already have in 7.11
Can anyone let me know exactly the steps I would perform to handle these faults - does the exception name / handler A above need to be named the actual exception / fault ObjectNotFoundFault?
Any help appreciated.
Thanks,
Keith)?
Any help appreciated.
Thanks,
Keith

Thanks - my scenario I guess is #2 of that blog. But is your take that even if I don't care what is in the fault message, i.e. I don't care about the contents of it but rather I just want to continue on from it, that I still need to perform this java coding? It's not clear to me from what he says - it seems to me he does the java coding to actually capture the contents of the message. I am in fact using the soap axis adapter too, as he is. The screen shot showing the exception branch is basically what I have.
Regards,
Keith

BPM Integration Process that correlates 2 messages.

I have an BPM Integration Process defined that collects Deliveries for an Order number and when an Invoice arrives for the same Order number it merges the messages to produce another file that is for a 3rd party.
I correctly receive in the Delivery and the Invoice u2013 I can see them in SXMB_MONI with a checkered flag and they are directed to my BPM. I can see this also in SXMB_MONI_BPE. I can also see the correlation correctly found in both messages. No error is reported by either SXBM.. transaction.
However it does nothing except receive the files u2013 I am expecting a transformation and then the send step to execute.
Start > CollectIDOCBlock > Collect Fork
Fork1
Infinite Loop for Receive Delivery (Start process) and Collect in Container. It uses and activates Correlation OrderNum
Fork2
Receive Invoice uses Correlation OrderNum (it does not activate the correlation)
At the end of the Fork (when Delivery collected and an Invoice is received)
It will then do the Transformation and Send Step.
<End
I have tried various combinations of the correlations and which receive step starts the process. Any ideas ?

Yes that did work. Now does somebody know what exactly the FORK parameter number of branches does ?
The SAPHelp is here
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
+You can specify the required number of branches and then define whether the process must run through all branches, or just a particular number of branches+
But it does not explain why you need to have 1 as necessary branches rather than 2. There are 2 branches in the FORK - so why does having 1 as the parameter work and not 2.
In this SAPHelp for Message-Dependent Loop
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
it indicates to me that the parameter should be 2.
BUT the SAP pattern (BpmPatternCollectMessage) I have used as a base for mine has this as 1 and not 2.
Why is 1 the correct value and not 2 ??

Integration process in File to BPM Scenario

hi,
gud morning. i got a problem while designing a BPM. in designing the integration process in IR, i am not able to get both the abstract interfaces to select from, while defining the container. plz post a solution for this. thank u.

Hi,
In this blog, I have used Business <b>Service</b> created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

Include xi integration process statistics into slr report

Similar Messages

Maybe you are looking for