Includes not working on a .PHP3 page

I had a page already set up as a basic html page, it is using
a template, plus some include files for the banner and footer on
the page.
I needed to make the page dynamic so that I could add a
variable to a form action...so I changed the file extension to
.php3
After I did this, the page and the variable work great,
except the include files no longer show up on the page. The
template file seems to be ok.
Any ideas of what I may have done wrong?

Make a Service appointment for the keyboard at your local AASP.
Apple - Find Locations
I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

Similar Messages

I upgraded to version 9 from version 8. The following items do not work properly - menu, home page, navigation bar, wheel click. I backed up to version 8, and none of this stuff works right. How do I fix this?

When I open Firefox, the bookmark menu is a little tab in the upper left corner. If I go to view and un-click bookmark menu and then view, click it, the standard menu bar shows up. The Back and Forward buttons don't work. The navigation window does not show the URL of the current page. When opening, the home page does not come up. The wheel click works on the bookmark bar, but not within a page. The menu (file, edit, etc) does not work after the first page. Version 8 worked well. When I upgraded to version 9, all this trouble started. I backed up to version 8, but the problem persists.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

My Safari browser is not working well. Junk pages keep poping in and key pages for me appear intoxicated by alien pop ups preventing me navigate that page. Updated last Safari version and problem prevailed. Tried downloading Safari for Mac OS X Mavericks.

My Safari browser is not working well. Junk pages keep popping up and key pages, for me, appear intoxicated by alien pop ups preventing me navigate that page.
I updated to latest Safari version (7.0.4) but the problem persists.
I tried downloading a new version of Safari for Mac OS X Mavericks but couldn't find it available.
Thanks for your help.

The pop ups are malware. It's not necessary to reinstall Safari.
Help here ..
The Safe Mac » Adware Removal Guide
The Safe Mac » Genieo
The Safe Mac » Mac Malware Guide
Just so you are aware, on a Mac running Mavericks, the only way to reinstal Safari to to restore OS X using OS X Recovery

Front page opens works shortly freezes. only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally. The restart saved tabs does not work on that first page.

front page opens works shortly freezes.
only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally.
The restart saved tabs does not work on that first page.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy

Php include not working

Good Afternoon.
I am having a hard time trying to find what needs to be set to allow url
include statments in php on Netware 6.5 sp3, php5.
I know my code is correct after trying it on an external server, and it
seems all other php coding works. Just not the http includes as shown
below:
<?php
include ('http://your.website.here/filenamehere.php');
?>
php.ini is posted below:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably
guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or
M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an
expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and
parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the
equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend
extension),
; you may only use these constants *after* the line that loads the
extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file.
It
; sets some non standard settings, that make PHP more efficient, more
secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes
from
; the standard settings are thoroughly documented, you can go over each
one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the
php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it
features
; different values for several directives, in order to improve
performance, while
; possibly breaking compatibility with the standard out-of-the-box
behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_globals = Off [Security, Performance]
; Global variables are no longer registered for input data (POST, GET,
cookies,
; environment and other server variables). Instead of using $foo, you
must use
; you can use $_REQUEST["foo"] (includes any variable that arrives
through the
; request, namely, POST, GET and cookie variables), or use one of the
specific
; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"],
depending
; on where the input originates. Also, you can look at the
; import_request_variables() function.
; Note that register_globals is going to be depracated (i.e., turned
off by
; default) in the next version of PHP, because it often leads to
security bugs.
; Read http://php.net/manual/en/security.registerglobals.php for
further
; information.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined
array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the
execution of
; scripts will no longer be displayed as a part of the script output,
and thus,
; will no longer be exposed to remote users. With some errors, the
error message
; content may expose information about your script, web server, or
database
; server that may be exploitable for hacking. Production sites should
have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur
during the
; execution of your script will be logged (typically, to your server's
error log,
; but can be configured in several ways). Along with setting
display_errors to off,
; this setup gives you the ability to fully understand what may have
gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically
results in less
; writes, and sometimes less packets sent on the wire, which can often
lead to
; better performance. The gain this directive actually yields greatly
depends
; on which Web server you're working with, and what kind of scripts
you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc
global
; variables.
; - magic_quotes_gpc = off [Performance]
; Input data is no longer escaped with slashes so that it can be sent
into
; SQL databases without further manipulation. Instead, you should use
the
; function addslashes() on each input element you wish to send to a
database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP surpresses errors of type E_NOTICE. These error
messages
; are emitted for non-critical errors, but that could be a symptom of
a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by
reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are
recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant
browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the
output
; buffering functions. You can also enable output buffering for all files
by
; setting this directive to On. If you wish to limit the size of the
buffer
; to a certain size - you can use a maximum number of bytes instead of
'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using
ob_start().
; Using this ini directive may cause problems unless you know what
script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and
"zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling
the
; PHP function flush() after each and every call to print() or echo() and
each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = off
; The unserialize callback function will be called (with the undefined
class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision
significant
; digits after the floating point. The default value ensures that when
floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by
reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the
function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each
time
; you use this feature, and the argument will be passed by value instead
of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir = "sys:/tmp"
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe
Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables
that
; the end user won't be able to change using putenv(). These variables
will be
; protected even if safe_mode_allowed_env_vars is set to allow to change
them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; By default this is also set to "sys:/tmp". This is actually the value
that is
; set for the below mentioned "upload_tmp_dir" directive. If
"upload_tmp_dir" is
; changed, change the same for "open_basedir" also. This is done to allow
; phpMyAdmin application users to execute SQL commands through an SQL file.
open_basedir = ".;sys:/tmp"
; This directive allows you to disable certain functions for security
reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security
reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; Misc
; Decides whether PHP may expose the fact that it is installed on the
server
; (e.g. by adding its signature to the Web server header). It is no
security
; threat in any way, but it makes it possible to determine whether you use
PHP
; on your server or not.
expose_php = On
; Resource Limits ;
max_execution_time = 30 ; Maximum execution time of each script, in
seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing
request data
memory_limit = 64M ; Maximum amount of memory a script may consume
(8MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often
result
; from a bug in your code, but it's possible that it
was
; intentional (e.g., using an uninitialized variable
and
; relying on the fact it's automatically initialized
to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best
interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error
logging
; instead (see below). Keeping display_errors enabled on a production web
site
; may reveal security information to end users, such as file paths on your
Web
; server, your database schema or other information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log
(below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On
; Set maximum length of log_errors. In error_log information about the
source is
; added. The default is 1024 and 0 allows to not apply any maximum length
at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on
same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this
setting
; is On you will not log errors with repeated messages from different
files or
; sourcelines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that
direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from
http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used
including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
error_log = "sys:/php5/error.log"
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST,
Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right,
newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You
may
; want to turn this off if you don't want to clutter your scripts' global
scope
; with user data. This makes most sense when coupled with track_vars - in
which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily
lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them
off,
; for performance reasons.
register_long_arrays = On
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables,
you
; should turn it off for increased performance.
register_argc_argv = Off
; Maximum size of POST data that PHP will accept.
post_max_size = 8M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = off
; Magic quotes for runtime-generated data, e.g. data from SQL, from
exec(), etc.
magic_quotes_runtime = off
; Use Sybase-style magic quotes (escape ' with '' instead of ').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
; Windows: "path1;path2"
;include_path = ".;c:phpincludes"
; NetWare
include_path = ".;sys:/php5/includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below.
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = sys:/php5/ext
; Whether or not to enable the dl() function. The dl() function does NOT
work
; properly in multithreaded servers, such as IIS or Zeus, and is
automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI
under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache
or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name
that PHP
; will look for to know it is OK to continue execution. Setting this
variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers
to
; use when sending HTTP response code. If it's set 0 PHP sends Status:
header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if
not
; specified).
upload_tmp_dir = sys:/tmp
; Maximum allowed size for uploaded files.
upload_max_filesize = 100M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
;user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example, on Windows:
; extension=msql.dll
; ... or under UNIX:
; extension=msql.so
; Note that it should be the name of the module only; no directory
information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
;Windows Extensions
;Note that ODBC support is built in, so no dll is needed for it.
;extension=php_bz2.dll
;extension=php_cpdf.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_exif.dll
;extension=php_fdf.dll
;extension=php_filepro.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_java.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_msql.dll
;extension=php_mysql.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_oracle.dll
;extension=php_pdf.dll
;extension=php_pgsql.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_sockets.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_w32api.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_yaz.dll
;extension=php_zip.dll
;NetWare Extensions
extension=php_ldap.nlm
extension=phpmysql.nlm
extension=php2ucs.nlm
extension=php_xml.nlm
extension=php_ossl.nlm
; Module Settings ;
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling
define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Win32 only.
;SMTP =
;smtp_port = 25
; For Win32 only.
; sendmail_from =
; For Unix only. You may supply arguments as well (default: "sendmail -t
-i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra
parameters
; to the sendmail binary. These parameters will always replace the value
of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to
char.
; See the documentation on odbc_binmode and odbc_longreadlen for an
explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will
use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only
look
; at MYSQL_PORT.
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo
get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to
this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in secondes) for connect timeout. -1 means no limit
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index
scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLI]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect()
will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only
look
; at MYSQL_PORT.
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo
get_cfg_var("mysqli.default_password")
; and reveal this password! And of course, any users with read access to
this
; file will be able to reveal the password as well.
mysqli.default_password =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results
according
; to their Sybase type, instead of treating them all as strings. This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case = "lowercase"
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of
its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of
its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help
the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead
of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that
case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"
session.save_path = sys:/php5/sessiondata
; Whether to use cookies.
session.use_cookies = 1
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other
method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit
register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 0
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeent ry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one
batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. Default = 25
;mssql.max_procs = 25
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you
want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1
; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1
; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =
; Default user.
ingres.default_user =
; Default password.
ingres.default_password =
[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"
; Default port to connect to.
pfpro.defaultport = 443
; Default timeout in seconds.
pfpro.defaulttimeout = 30
; Default proxy IP address (if required).
;pfpro.proxyaddress =
; Default proxy port.
;pfpro.proxyport =
; Default proxy logon.
;pfpro.proxylogon =
; Default proxy password.
;pfpro.proxypassword =
[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On
[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true
[LDAP]
; Path to a directory which contains SSL certificates to be used for LDAP
over SSL
; Terminate the path with /
ldap.ssl_cert_dir = "sys:/php5/cert/"
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation accoding to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
JIS.
; With mbstring support this will automatically be converted into the
encoding
; given by corresponding encode setting. When empty
mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola
and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; Local Variables:
; tab-width: 4
; End:
[Imagemagick Extension - Added By GKO - 08.01.05]
extension=php_imagick.nlm
Thank you for any insight you can give ... I am not a php person.
Tony

Tony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Bean is not worked in the jsff page

Hi
JDeveloper Studio Edition Version 11.1.2.2.0
I Have a bean for run a jasperreport
package Reports;
import javax.faces.event.ActionEvent;
import sp11.model.apm.clubImpl;
import java.io.ByteArrayOutputStream;
import java.io.InputStream;
import java.math.BigDecimal;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.util.HashMap;
import java.util.Map;
import javax.faces.context.FacesContext;
import javax.servlet.ServletContext;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import net.sf.jasperreports.engine.JasperExportManager;
import net.sf.jasperreports.engine.JasperFillManager;
import net.sf.jasperreports.engine.JasperPrint;
import net.sf.jasperreports.engine.JasperReport;
import net.sf.jasperreports.engine.type.WhenNoDataTypeEnum;
import net.sf.jasperreports.engine.util.JRLoader;
import net.sf.jasperreports.view.JasperViewer;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.binding.BindingContainer;
import oracle.jbo.client.Configuration;
public class CardFrontBean {
public CardFrontBean() {
public String runReportAction(){
DCIteratorBinding rleIter = (DCIteratorBinding)getBindings().get("RealentityIterator");
String RleId = rleIter.getCurrentRow().getAttribute("RleId").toString();
BigDecimal ID = new BigDecimal(RleId);
Map parameter = new HashMap();
parameter.put("ID", ID);// where ID is a jasper report parameter
try
runReport("card_front.jasper", parameter);
catch (Exception e)
return null;
public BindingContainer getBindings(){
return BindingContext.getCurrent().getCurrentBindingsEntry();
public ServletContext getContext(){
return (ServletContext)getFacesContext().getExternalContext().getContext();
public HttpServletResponse getResponse(){
return (HttpServletResponse)getFacesContext().getExternalContext().getResponse();
public static FacesContext getFacesContext(){
return FacesContext.getCurrentInstance();
public void runReport(String repPath, java.util.Map param) throws Exception {
Connection conn = null;
try
HttpServletResponse response = getResponse();
ServletOutputStream out = response.getOutputStream();
response.setHeader("Cache-Control", "attachment;filename=\"CardFront.pdf\"");
response.setContentType("application/pdf");
ServletContext context = getContext();
InputStream fs = context.getResourceAsStream("/ReportsFolder/" + repPath);
JasperReport template = (JasperReport) JRLoader.loadObject(fs);
template.setWhenNoDataType(WhenNoDataTypeEnum.ALL_SECTIONS_NO_DETAIL);
PreparedStatement statement = null;
String amDef = "sp11.model.apm.club";
String config = "clubLocal";
clubImpl am = (clubImpl)Configuration.createRootApplicationModule(amDef,config);
statement = am.getDBTransaction().createPreparedStatement("select 1 from dual", 0);
conn = statement.getConnection();
JasperPrint print = JasperFillManager.fillReport(template, param, conn);
//JasperViewer.viewReport(print, false);
ByteArrayOutputStream baos = new ByteArrayOutputStream();
JasperExportManager.exportReportToPdfStream(print, baos);
out.write(baos.toByteArray());
out.flush();
out.close();
FacesContext.getCurrentInstance().responseComplete();
catch (Exception jex)
jex.printStackTrace();
finally
close(conn);
public void close(Connection con){
if (con != null)
try
con.close();
catch (Exception e)
and a commandButton in the .jsff page
<af:commandButton id="Realentitycardfront"
textAndAccessKey="#{nls['REALENTITY_CARDFRONT']}"
shortDesc="#{nls['REALENTITY_CARDFRONT_HINT']}"
action="#{CardFront.runReportAction}"/>
my .jsff page is in a bounded task flow with Use Page Fragments = true
when i click the button. ........>nothing
what is the matter
i read in a post that it is not work in jsff page with page fragmentation
please help me
thanks

One problem is that you write into the output stream from an action method and don't know what's already in the output stream. Once there is one byte written to hte stream (which you can't know from inside the action method) the pdf stream does not behave as you think it would.
Next thing is that you use createRootApplicationModule but never release it. This will get you out of resources error eventually.
A better approach would be to put this code in a servlet and stream the report from there. In the servlet you have control over the output stream.
Check my blog http://tompeez.wordpress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-3/ where I show how to serve images from a servlet which can even use the application module pool from the application (no need to use createRootApplicationModule at all). All you have to do is to exchange the part where I get and stream the image data to your needs.
Timo

Server-side includes not working

Running CF9.x on Apache 2.2 Win 7.
I inherited an older html multiple page site that we are breaking down into includes using html server-side includes:
e.g. , and saving the page as a .html file, which is then <cfincluded> in a .cfm file.
Is there a way to get  include working on a CF page? All I see is the contents of the page, but none of the sidebar.html, or header.html, etc.
I know I could switch to cfincludes, but the boss LOVES to muck around with the html side of things.
TIA,
Doug

I know I could switch to cfincludes, but the boss LOVES to muck around with the html side of things.
All the more reason to do it, surely?
But anyway...
I've never used a server-side include, but it looks to me that they just load the file and return it at that position in the document.
For CF code to be executed, the file needs to be REQUESTED, so it won't be a starter with server-side includes.
Adam

Image hyperlinks not working for internal menu pages

Hi, I'm after some help with problems publishing my iweb site to an external folder. My website is www.gingham.com.au and I have uploaded it using Fetch.
My main problem is with the menu bar - it's an image which i have then created hyperlinks over various headings to link back to the other pages in the site. This isn't working - any ideas on what I could check for?
I also had an issue with the T_String error, i read a little about it but am very new to websites so deleted the first line of code as was listed in another post.
Thanks for any feedback.

I have had problems with link not working or they forget where they are supose dto link too.
At one time I had a HP web page link appearing in the text box. Not sure why, I haven't visited the HP website for months.
I just have to go top-down and reassign all the links, and do it a few times.
I think the problem comes from when designing the website from teh start,if you are like me you will be adding and deleting elements and changing lots of stuff to make the site look the way you want.
I think iWeb has problems with the deleting of objects, the more you change in a single session the more problems you will get.
Now I quit iWeb on a regular basis, but now I have setttled for a style of my pages I will not be making big changes so iWeb should settle down for me.

Some hyperlinks are not working e.g. #page-item and a name="#page-item" how can I resolve that

It's a toplink to a page item on the same page internal (hyperlink) that is not working.
E.g. toplink e.g. #ssc01 to the internal pagelink
<a name="#ssc01"><b>Algemene Informatie</b></a>

Don't add the hash (#) to the name attribute. The hash is used in the URL as separator and should not be in the name.
<pre><nowiki><a name="ssc01">Algemene Informatie</a> </nowiki></pre>

DONE button is not working in Oracle Configuration page in Order Management

Hi,
We are in 11.5.10.2 application, In order managemnt DONE button is not working. Once we choose all the options and click on DONE button the configuration page is not closed.
Please help us to come out ot this problem.
Thanks
Krishna

Hi,
We are in 11.5.10.2 application, In order managemnt DONE button is not working. Once we choose all the options and click on DONE button the configuration page is not closed.
Please help us to come out ot this problem.
Thanks
Krishna

Liquid Layout does not work with extreme long pages

(Solution at the end)
Hi there.
I have a layout for iPad with a width of 1024 and variable height.
I now need an alternative layout for iPad HD. So I try to use liquid layout to alternate my layout to 2048 width and height x 2.
The maximum size in InDesign is 15552px. So I managed to get all my SD layouts below 7776px.
to sum things up:
iPad SD: 1024x7776
transform into
iPad HD: 2048x15552
Problem is, in this case the option to scale everything automatically gets completely ignored.
Another layout, which uses only text and no images, boxes or multimedia gets transformed correctly.
Does anybody have a tip for me how I can work around it?
Thanks in advance.
p.s.: Adobe, please increase the maximum sizes for documents
Solution:
Aaaand I just got it. Specify a new preset for your document-sizes: 2048x15552. Now if you use the page tool just click the new (in my case) "iPad HD" and choose liquid layout: scale.
Works like a charm

I am using Automator to find files with the .pages
extension and then copy them to another folder, which
lists the copied Pages files by name but with Zero
KB! The files will not open - error: the index.xml
file is missing.
Any ideas on how to get a Pages file to copy with
Automator?
Hi Kurt
To answer the title of your message: no, Pages does not work with Automator.
But that's not really what you're asking. You really want to know how to copy Pages documents using Automator.
To help you we need to know what Actions you're using in Automator and the parameters you're using eg the Filter Finder Items action (using a pages file extension) and the Copy Finder Items actions. Pls let us know how you're doing this and we'll try to help.
Thanks.

Windows 8.1 IE 11 not working except on Adobe page. Please help!

I updated to Windows 8.1 IE 11. Since that time I have been told by several websites I need to get a flash player. I went to Adobe help page and did all it said. Adobe page is the only page my flash works perfectly. My flash still does not work and now I am getting an error window that I do not understand. Error #2440? Not sure if I remembered that right. Also, just so you know I did try to change my browser. This actually made it worse. Any ideas that can help would be great. I am about five seconds away to playing baseball with this new computer!

The problem is the abomination called Internet Exploder 11.
Microsoft thought they were really being cool when the wrote the code for it, and the intentionally screwed up the "User-Agent Strings", which websites use to identify the browser and provide the proper content for it.
Thansk to the "geniuses" <sacrasm intended> in Redmond, websites see IE11 as either a Gecko browser (Firefox) or a Webkit browser (Opera or Safari). Problem is since IE DOESN'T have that browser engine, the identification is false, and it totally screws everything else up. (See: IE11's User-Agent Strings).
Since the pages can't recognize the browser, they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon. Personally, I hope this is what it finally takes for EVERYONE EVERYWHERE to realize what a massive pile of garbage IE is and always has been.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Help needed "tabEnabling" not working in simple login page - Flex

Hello Friends,
I need a small help in Flex. I am doing a simple login page application in FlashBuilder 4.0 & i have kept 2 input boxes like Login,Password and a submit buttion. On clicking the button i am calling a method, so far everything is working fine.... But some how tabenabling is not working. suppose if you are in login inputbox and i press "tab key" it has to go to password input box.. but its not working. can any one help me on this, why it is not working. i have tried all the attempts using tabEnabled = "true". but stil i am failing to do this.
your help would be appreciated.
Rajesh
Message was edited by: Rajeshb_Flash

<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml"
   width="100%"
   height="100%"
   verticalAlign="middle"
   horizontalAlign="center">
<mx:Script>
<![CDATA[
   import com.tel.model.EventConstants;
   import mx.controls.Alert;
   import mx.managers.CursorManager;
   import mx.rpc.events.FaultEvent;
   import mx.rpc.events.ResultEvent;
   import mx.rpc.http.mxml.HTTPService;
   private var httpService:HTTPService;
   public var userID:String = "";
   public function init():void{
   private function mouseClickSubmit():void{
    if(userName.text != "" && password.text != ""){
     userID = userName.text;
     initService();
    }else{
     if(userName.text == ""){
      Alert.show("Please enter 'User Name'.","Alert!")
     }else if(password.text == ""){
      Alert.show("Please enter 'Password'.","Alert!")
   private function initService():void{
    var params:Object = new Object();
    params["userName"] = userName.text;
    params["password"] = password.text;
    httpService = new HTTPService();
    httpService.showBusyCursor = true;
    httpService.resultFormat = "xml";
    httpService.method=URLRequestMethod.POST;
    httpService.addEventListener(ResultEvent.RESULT, httpServiceResultHandler);
    httpService.addEventListener(FaultEvent.FAULT, httpServiceFaultHandler);
    httpService.url = "Login.action";
    httpService.send(params);
   private var boolFirstRun = true;
   private function httpServiceResultHandler(event:ResultEvent):void{
    httpService.removeEventListener(ResultEvent.RESULT, httpServiceResultHandler);
    httpService.removeEventListener(FaultEvent.FAULT, httpServiceFaultHandler);
    httpService = null;
    var resultXML:XML = new XML(event.result.toString());
    if(resultXML.children().toString() == "true"){
     boolFirstRun = false;
     dispatchEvent(new Event(EventConstants.LOGIN_SUCCESS))
    }else{
     userName.text = "";
     password.text = "";
     Alert.show("Login Failed! Invalid 'User Name' or 'Password'.","Alert")
   private function httpServiceFaultHandler(event:FaultEvent):void{
    httpService.removeEventListener(ResultEvent.RESULT, httpServiceResultHandler);
    httpService.removeEventListener(FaultEvent.FAULT, httpServiceFaultHandler);
    httpService = null;
]]>
</mx:Script>
<mx:Panel title="Login Page" width="400" height="300" styleName="loginPanel" verticalAlign="middle" horizontalAlign="center" backgroundImage="assets/images/hello.jpg" backgroundAlpha=".1">
   <mx:VBox width="260" height="95" styleName="loginBox" backgroundAlpha=".2">
   <mx:HBox width="100%">
    <mx:Label width="85" text="User Name" styleName="loginTextStyle"/>
    <mx:TextInput width="150" id="userName"/>
   </mx:HBox>
   <mx:HBox width="100%">
    <mx:Label width="85" text="Password" styleName="loginTextStyle"/>
    <mx:TextInput width="150" id="password" displayAsPassword="true"/>
   </mx:HBox>
   <mx:HBox width="100%">
    <mx:Spacer width="80%"/>
    <mx:Button label="Enter" id="submit" click="mouseClickSubmit()"/>
   </mx:HBox>
</mx:VBox>
</mx:Panel>
</mx:VBox>

Java script will not work after creating new page

I am using dreamweaver cs3 and have a java script to rotate a banner in a template. This script has worked fine in the past when I created pages in Dreamwever. Now the script works fine only when I test it in a template but when I try to upload to my ISP the script will no longer work. At first I thought it was the ISP made changes but the person who sits next to me running the same version of Dreamweaver can create a page and the java works. The java is placed in a template, tested by viewing in a brower and it works, however once I try to create a new page using the template the scriipt will not work. To get around this I have the person sitting next to me save my template and then I can create pages. Also if I save the template with my pc and it updates the pages created by the template the java will no longer work.
This is very frustrating as I cannot create or modify my template on this pc. What would prevent this from working?

OK - now we are on to something ..... the script on the template only contains:
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);
However when I create a new page from the template with this javascript in it the code changes to:
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]imgs[i]);
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);

Includes not working on a .PHP3 page

Similar Messages

Maybe you are looking for