Including customized fields in Field selection for Project definition

Hi Experts,
I have created additional zfields in Project definition,
But those fields are not coming in customization node " Field selection for Project Definition".
Is there any way , by which we can include those fields in the list of " Field selection for Project Definition"  in customization ,
so that i can hide/disable for diff project Profile.
Thanx in adv.
Regards
Ashis

Hi,
actually one can try to add customer fields to field configuration using transaction SFAW alike SAP own fields.
It is usually possible to extend the list of the modifiable fields of the  field selection in transaction SFAW within the framework of a            
modification (as long as the fields are relative to tables PRPS or  PROJ). The relevant module pool is SAPLCJWB.                             
Example
E.g. for the SAP field 'functional area' (field  PRPS-FUNC_AREA) one would proceed as follows:                                                                               
In the transaction SFAW, Module pool SAPLCJWB, Screen group PRPS 
-Select 'Modified fields', and choose 'Change'.                          
-Enhance the list of the modifiable fields by the following entries :    
PRPS-FUNC_AREA. Answer yes to the question : do you want the field to   
be modifiable?.                                                         
Don't forget to save and then click on the 'generate button' of the     
transaction SFAW.                                                       
- The relevant field for distribution profile would be PRPS-PGPRF.         
In the same manner one can try to add the Z field.
Please note: This procedure is considered as a modification, so please review note    
114390 which discusses a problem which can occur during an upgrade.      
Kind regards
Peter

Similar Messages

  • Custom Fields added to Project Definitions transaction (CN42N)

    In the Project Definitions Overview transaction (CN42N), it was requested that we add custom fields to table PROJ.  The fields added were Responsible Analyst Name/Analyst No. and Responsible Accountant Name/Accountant No.  We have created two Z tables, one for the Responsible Accountant info, and one for the Responsible Analyst info.  These Z tables have been populated with the necessary data, no problems.  The Issue is that in table PROJ, only the Responsible Account No., and Responsible Analyst No. is displayed, and not their respective Names.  Why are they populated in the Z table but not in table PROJ?

    Hi,
    First thing is when your are saving number are you also saving description from your Ztable to proj table zfields for description?  For this I assume you have also added description field in  PROJ table.
    Also I am wondering why you want to store description in PROJ table. You have number in PROJ table  and when ever or where ever you want you can pick description from Ztable. This will help to maintain consistency in logng term.
    Say  for example today you have description  ABC PQR XYZ in Ztable and while saving this description will be saved in PROJ. Later due to some reaosn you changed description to ABC UVW PQR in Ztable. Now you see the description will be different in PROJ and Ztable. Hence I would just maintain number in Proj and get description always from Ztable. Hope this makes sense.
    Enjoy SAP.
    Pankaj

  • How to add a custom field to the "Projects" page "Group by" data menu list

    Hi,
    I'm deploying Project Online and I want to group projects by a custom field on the "Projects" page. Currently I can see options for group by Project Name, Start, Finish, % complete etc. I would like to group by a custom field of programme name
    which is filled in on the Project Details form.
    I can create the enterprise field etc, however I can't work out how to make the new enterprise field appear in this list. Or am I barking up the wrong tree and should be creating separate Project Types for each programme?
    Any help an advise greatly appreciated.
    Regards,
    Conrad

    Hello, add the programme field to the Project Center view then it will be available to group by. Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT

    Hi,
           I am trying to do the Post Goods Issue (PGI).
    But, the system is throwing an error as mentioned below.
    Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
    I made the Cost Center as Required Entry. But, there was no effect on the PGI.
    I could not make out the exact error.
    Please guide me properly in this regard and do the needful.
    Thanks in advance.
    Thanks & Regards,
    Srinivasa M.S
    +91-9910077829

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Field Selection for Open Item Clearing

    In Field Selection for open item clearing (t-code : O7F1),
    can I maintain non standard field such as "XREF3" (Reference KEY 3) ?
    I tried to insert "KIDNO" into O7F1 and system allowed it.
    But when I checked in F-51, the XREF3 (Reference KEY 3) was not in the field selection.
    Have anyone get the same issue?
    Thanks.

    Hi Sneha,
    Check the following config path for relevant settings-
    Financial Accounting (New) > Accounts Receivable and Accounts Payable  > Business Transactions  > Open Item Clearing > Make Settings for Processing Open Items > Choose Selection Fields
    Select customer , vendor etc as per requirement.
    Regards

  • Use of Field selection for Multilevel list Display Equipment/Function loc

    Dear Expert,
                          Anybody suggest me that how can we use the feature of Equipment & function location settings as given SPRO path.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Equipment ® Define Field Selection for Multi-Level List Displays of Equipment.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Functional Locations ® Field Selection for Multi-Level List Displays of Functional Locations.
    Your help & suggestions are much appreciated.
    Regards,
    Akhilesh

    Dear AKhliesh,
    This customizing setting is for the T-code IE07. You can customize view of IE07 in different strcuture with required fields wants to didplay or suppress.
    Regards,
    Kaushal Rai

  • PS: Setting Project Profile as a mandatory field for Project Definition

    Hi,
    I would like to know how to set Project Profile as a mandatory field for Project Definition (CJ20N or CJ01).  I tried to look for controls at OPUK config but the Project Profile is not available for definition - either mandatory, optional, suppressed, etc.  Would appreciate if you can share your expertise on this.
    Thanks!
    Regards,
    Vivian

    Hi,
    I would like to know how to include some additonal fields in OPUK/OPUJ.  We have defined some .INCLUDE component / fields to SAP standard table PRPS/PROJ.  We want those fields to also appear in OPUK/OPUJ so that we could also defined their characteristics - whether input, mandatory, suppressed, etc.
    Thanks!
    Regards,
    Vivian

  • Add a custom tab to include custom fields in Shipment Screen (VT03N)

    Hello every one,
    We have a requirement to add a custom tab to include custom fields in shipment header.
    Can any one of you help me on this?
    Thanks in advance !!!
    Regards,
    Ganga

    Hi Ganga,
    This is the question of customer exit....you will get very good links on the forum itself...but i can give you some hint:
    1. fing out the package or program name for the transaction(by gng in the setting)
    2. go to se84 and in the enhancement->customer exit tab...with the help of pkg name got above find out the various enhacement for this tcode.
    3.find out the appropriate one by putting in the break point.
    4. You can get an exit with a screen exit where you will create your own screen(with the custom field if.....then you have to append them in the table) or with the std fields.
    5. there you will get the fm exit for PBO and PAI as well.
    Hope this might help you in solving the problem.
    Pooja

  • Set Field Selection for Completion Confirmation

    I want to change the indicator of one field from "ready to input" to "required"..But i couldnt understand exactly the hierarchy under "Set Field Selection for Completion Confirmation"  tab in SPRO. there are 3 parts under that tab;
    1-PM: Confirmation - initial screen
    2-PM: Confirmation - list and detail
    3-PM: Confirmation - parameter
    and i also couldnt find the name of my field which is about "codes for causes"..
    Thanks...

    Russ,
      I don't think it could be accomplished through configuration or through Transaction variants.
    I think the simplest way to accomplish this would be by using one of the below user exits according to your needs.
    CONFPM02: Customer-specific entry checks 1
    CONFPM03: Customer-specific check by operation selection
    CONFPM04: Customer-specific entry checks 2
    The other option would be to use the Implicit enhancement functionality(If you are in EC C6.0 or above)  to modify the table control field attributes dynamically.
    Regards
    Narasimhan

  • OPUK - Define Field Selection for WBS - diff bet. Modified and Influence

    Hi All,
    Kindly advise what is the difference between influencing and modifield field's for 'Project Systems > Structures > Operative Structures > Work Breakdown Structures (WBS) > Define Field Selection for Work Breakdown Structures (OPUK),
    Thanks!
    Regards,
    Vivian

    modified field is the field on which the impact is registered i.e hide, mandatoru etc
    Influence is the field that is the reason why the modified field needs to be changed
    for example if you have two project profiles
    then for one project profiel you can have say the resp cost centre mandatory and for the other you can have the resp cost centre hidden
    In this example the project profile is the influencing field and resp cost centre is the modified field

  • How to prepopulate value in webapps input fields or for any custom fields in for any other forms?

    How to prepopulate value in webapps input fields or for any custom fields in for any other forms?

    What do you want to populate the form with?

  • Field Selection for Maintenance Planing

    Hi Dear,
               I have done some field selection somewhere in SAP System.Now when I am creating Maintenance Item,Maintenance Plan,now I am getting Function Location field as Required.
    I don't remember where is the field selection for making the field Function location mandatory.
    Please suggest.I am also looking into it.
    Thanks and Regards,
    VJ

    Hi Narasimhan,
                           I got the field where the changes need to be done.In Notification reference screen I had set the Function Location as a mandatory field.
    Problem solved by me it self.
    Thanks for your Effort.
    Thanks and regards,
    VJ

  • Field selection for G/L account 893010 not set up

    Hi,
    when iam creating a purchase order with reference of purchase requisition it is showing error as field selection for G/L account 893010 not set up,
    Thanking you,
    sukumar.P

    Hello,
    The field status are set up in two places.
        - on G/L account ( Tcode: FS03 - display, Tcode: OB14 Maintain )
        - on account assignment category in purchasing (Tcode: OME9)
          Both settings must fit to each other. If not, you receive error message ME 045 says that G/L account cannot be used.
          'Earmarked fund' should never be 'Req. Entry in G/L account's field status group setting.
          Because the MIGO document will not store 'earmarked fund' therefore no earmarked fund in accounting document either.
    For further information and guidance, take assistance of FI consultant in your team.
    Thanks & Regards
    JP

  • Field Selection for - Invoice Verification (MIRO)

    Dear Experts,
    Can anybody please explain how make Field selection for INVOICE VERIFICATION (MIRO).
    I want BUSINESS AREA field mandatory in MIRO.
    Thanks in Advance

    Hi,
    Business area is linked to other organizational units (plant, division,
    distribution chanel, cost center). It can be defined using assigments
    (e. cost centers to the business area) or combinations of information
    (like plant and division determination).
    It is usually derived from the account assignments of the cost items
    and inherited from there into the vendor line item.
    For MIRO,to automatically fill the business area it must be able to
    uniquely identify a business area.
    This means that for multiple materials each one must have the same
    business area for IV to fill the vendor line item.
    This is the way the system is designed.
    The business area can be set as 'optional' field and is not 'mandatory'
    by design.It can be customised according to the individual needs.
    Please check the field status in tr OB41/OB14 and  OB23 for the vendor.
    Best Regards,
    Arminda Jack

Maybe you are looking for