Including InfoPackages in Transport Requests

I want to include an InfoPackage in a transport request so that I can transport it from development to test. However, when I open the InfoPackage and try to include it I receive an error message informing me that Deltas have already been loaded. This is correct, but why would it stop me including the InfoPackage in a transport request?
Does anybody know what I can do about this?

Hi Stuart,
I guess you are trying to transport the "init" load infipackage. If so then change the load option to "full load" and then transport. You can later change the option in QA.
Bye
Dinesh

Similar Messages

Collecting INFOPACKAGE in Transport request individually

Hi ALL:
While collecting infopackage in Transport request individually(Flow is Infosources> Tools> Object Catalog Entry), it is not prompting to enter the valid transport request number(after entering the valid package name).
Can anyone suggest me how to get the screen that prompts to enter the valid transport request number.
Thanks

Here is the steps to collect objects under transport request:
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
9. If everything is ok, release your request and ask your basis/security guy to move to QA.
OR
When you will create any object and save it, system will ask you to save under transport request and you can either save it under your transport request or can create new request.
Hope this helps..

How to include an INCLUDE into a Transport Request

Hi Experts
Requirement is to add an INCLUDE program object (which is not part of any other request) into a Transport Request. I followed the below steps:
SE01 -> Entered TR# -> Display -> Request/Task -> Object List -> Include Objects.
In the selection screen of "freely selected objects",
selected objects -> Program = LZ123T00 (which I need to include).
Then, Execute!
It shows: No objects were selected!
How to fix this error?
Regds

Hi Varun
thx for ur reply. I tried this. it seems the INCLUDE alone cannot be written into the TR.
it says: "Cannot be added. The object is part of some system object"
If we add the whole Function Group to the TR, will it help? Will the TR hold all the associated INCLUDEs declared in this Function Group?
plz advise.

Which version of an object is included in a transport request

Hi experts,
I have one doubt regarding the transport requests and the object versions included in it.
We've found in one development that there are differences between the development system and the productive system and all the transport requests, which include this object, have been transported to production.
The transport requests were transported in the following sequence:
Order number    Date            Time
1. D01K904477 29.03.2007 17:41:52
2. D01K904511 30.03.2007 17:21:54
3. D01K904425 30.03.2007 17:51:36
The last order transported contains a previous version of the object.
From my own experience in other projects I'm not sure whether the transport system it's well configured or not. I have the idea that the transport requests always include the last version of the object transported. Probably, it depends on the transport routes... But I'm not sure.
Any help would be highly appreciated.

Thank you for your answer Juan.
This is clear. But my doubt is not solved yet.
I'm referring to the versions included in an older transport request.
In our system If we transport a previous transport request to production, the latest version of the object is overwritten.
E.g.:
TR 1    Date: 01/01/2007 (DD/MM/YYYY) First version of the program
TR 2    Date: 01/03/2007 (DD/MM/YYYY) Second version of the program
1. We transport TR 1 to production.
2. We transport TR 2 to production. We have the last version of the program in production.
3. If we create transport request TR 3 and we include the object in this TR, this TR will include the active version of the object.
4. If we transport TR 1 to production, latest version is overwritten. <b><<<< This happens in our system.</b>
We don't know if this is happenning due to the transport routes configuration.
Thanks in advance.

Undo changes included in a transport request

Hello,
I made the changes in DEV system and included those changes in a transport request. I didn't released this transport. Then I realized that those changes must be reverted. What should I do now? How can I undo those changes? Thanks

Revert back your changes you had done if required.
Then SE09 --> Display your request No.
Expand your main Request Folder --> Below your main Request No you can see Child Request No. Double click on Child Request No. Click on Change Mode or press Ctrl+F1 . Then under Object Tab you can see objects.
Select Those objects and click on Delete Row which is be a second button having RED marked minus symbol. It will give message like object is locked press ok. Automaticaly object will be removed from request. Do same procedure for all oject one by one.
Regards,
Sushant

Is there a way to see the details of transport request files

hello friends
for some reason when I try to create a package with objects like function group and function modules, I am not able to import the function modules on the other server.
So i would like to see if the transport request files that I have created (K900226.EC1 and R900226.EC1) has these modules included in them.
Is there a way that I can see what objects are included in the released transport request files.
Your help will be greatly appreciated.
Thanks
Ram

Hi Ram,
You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

To add infospoke to a Transport request!

Hi,
I had created a new infospoke and would like to add this Infospoke to the transport request!
but unlike other objects in BW, for which u can add or make a new transport request with extras option in menu bar!
But for infospoke there is no such option!
Can any one tell me how can i add infospoke to a transport request
Raj

Hello Bob,
i did changed mmany times the infospoke definition!
Everytime it gets activated but i wonder where that has been included in transport request!
we have system where all the objects will have a local when you first save or activate the objects!
when you change the package of the object then only it asks for transport request!
i am sure my infospoke is stroed as a local package but do not know how to change and include in a transport request
Raj

All transport requests of an ABAP program.

Hi,
I want all the transport request numbers created and released for a particular ABAP program.
Thanks in advance,
Rajesh Gupta

Hello,
Get all the Transport request numbers from the Version management of the program
- Create a Transport of Copies within SE09 or SE10
- Include all the Transport request numbers which u colelcted from the version management of the priogram and transport the Transport of copies .
Ensure the Transports were included in the correct order (ascending Order) within the Transport of copies.
Regards

Saving objects in Transport request

Hi all,
i want to save a Package and all its contents to a single transport request which already transported.I didn't do any change,but i need to save this in a new transport request in a simple way.suggest me a simple way to do it.
Thanks in advance,...

Hi
The best way is to again save all the objects of ur package to the same transport request is to open individually each object in the change mode and try and make some changes(just give some space or try and right something which would change the status of ur object ot inactive mode...we do this to save this yet again in the transport request)when u save it again it will prompt u a window in which it asks you the transport request to be created(if you have already created a request then if that or else create a new one)....like wise u save all the objects of ur package in the same transport request......each time it shud ask you the transport request id.........
Now once it is done go to SE09 and open the task of your request ID here u'll find the objects....see to it that u have all ur object included in ur transport request ID............Hope i've answered ur question...
Award points if useful.....

How to register transport requests which is created outside CHaRM

Hi Experts
I have completed the ChaRM configuration in Solution Manager.
Now I want to include the open transport requests (which I have created outside of ChaRM) in ChaRM. Could you please guide me how I can include these open transports in ChaRM.
Thanks in advance
Regards
Venkat

Hi Prakhar
Thanks for your reply, as per SAP Note 1150426 I have executed the task in the maintenance cycle "Register transport request in tasklist", but the transport request is not added to the Change request.
Then I have tried to execute through sa38 there it's saying "Unable to find the task list / status of task list is not active". we are in ST - SAPKITL434
Could you please check and help me to resolve the issue
Thanks & Regards
Venkat

How can I check what kind of values does transport request saves?

Dear All,
I have changed the max.foregin exchange rate from 1% to 0% in company code global data and added a new error message 212 in work area F5. Then I transport it to QA system and PRD system.
However in T001 table change log PRD, the address was said to be changed from a number to another number also. But I don't remember that I changed the address of a company code. And I was not able to find the value before and after the change. Do you know where I can find the address of the company code? I have tried to get address in company code global data but in the poped dialog neither of the values are found. It is strange that the addresses of other company codes in T001 are not changed.
And in the transport request, the new number was not included. I don't very understand what kind of information was included but I know I did not change other config of the company codes.
I have 2 questions
1. Where I can find the address of a company code?
2. How to see what information has been included in the transport request?
Thank you in advance.
Emma

Hi Emma,
How to see what information has been included in the transport request?
Go to transaction code SE10 and identify your transport request then double click the left side you will be get tree.
if you want you can doubleclick the tree again so that you can identify which configuration step you saved.
Hope it is useful.
Thanks,
Haribabu

Regarding User and Transport request

I have unreleased transport request still, created at old client 5XX. Now this old client 5XX does not exists.
From the new client, I am trying to release or delete those Trans Request using User SAPUSER/DDIC.but i cannot delete.
However if using the Old customer user id ZXXXX, who created Transport request, we are able to delete those Transport request by changing the old client to new client.
How to solve this issue any ideas.
regards

Hi ,
u can include those old transport requests into new transport request , then do the transport.
check tcode SE03.
regards
Prabhu

Query regarding transport request

Hey guys,
I have a question regarding transport requests.
If only the report source code is included in the transport request, the text elements of the program will not be transported to the next box?
when you transprot the main program or the function pool, does it follow that all the changes in FM's under the function pool will be transported to the next box?
Thanks a lot!
Rgds,
Mark

Hello,
If you create transport request with just the report, text element will not be transported:
LIMU REPS <Program>
For text element, you need the following transport entry:
LIMU REPT <Program>
If you want to transport both, you can have the following entry:
R3TR PROG <Program>
If you have the following transport, all the components of function pool will be transported.
R3TR FUGR <Function Group>
Thanks,
Venu

Ri import of transport request

Hi guys,
we have got a issue in transporting the request, we have uploaded files to the the server which needs to be imported to the development R3 server , the file contains a package which contains data dictionary objects, programs, function groups, transaction codes,
when we tried to transport the request in STMS, Only data dictionary objects were transported and other objects were not transported , but if we check the request it is showing all the objects.
what we can do for this .Can we re import the same request or we need to put it to other request.Please can anybody give us the procedure what we need to follow.
Regards,
Shivdeep B
Edited by: bsdeep on Mar 9, 2011 6:44 AM

Hi Shivdeep,
Can you please check if all the objects were properly included while the transport request was created?
Please check the import log if it was successful with return proper code.
Regards,
Sujit.

Authorization objects in transport request

Hi All,
I'm trying to get a table that contains all the authorization objects that are included in a transport request. I only can get the object list but without the authorization values for each object.

Hi,
As per your query this can be see in suim t-code.
If you have any specific error or query then pls put it here then you will get the solution.
Anil

Including InfoPackages in Transport Requests

Similar Messages

Maybe you are looking for