Including parameter in report heading
how can I include the parameter that is selected within a link to run a
report as a "column heading ". In other words:
"Dept A" was selected via the link so when the report is run, the column
heading for the report shows "Dept A" and everything that falls within that
category. I have tried the htp.p('Org:'||get_value(parameter_name) but can I include
more than one parameter in that construct, and also can I manipulate the value's size and font?
Sincerely
CJ
Hi,
Is there a way of including a parameter that is passed in in the report ?Yes you can create a new calculation and in it you can either select from the available parameters or use the parameter name.
For example if you have a parameter called "P_DATE" you should create a calculation as followed:
:P_DATE
This will create a new column with the parameter data.
If you want to create a calculation using the parameter you should create the calculation and in it use the " : " before the parameter name.
for example to calc the number of days past since the parameter value:
trunc(SYSDATE) - trnuc(:P_DATE)
Tamir
Similar Messages
-
How can I include date in report header
How can I display the current date in my report header? I do not wish to modify the sql statement to include the sysdate.
Can I add the date in the 'Report and Customization Form Text' or in 'Additional PL/SQL Code'? If so then how?Maxine,
In the last tab of the report wizard,
you can add the plsql to display the date.
Alternately,create an unstructured UI template and add the [oracle][oracle] tag
and insert the plsql in it to display the
date -
Range Parameter in report heading
Post Author: Kara
CA Forum: Formula
Hi,
I am using version 9. I have designed a report with a date range parameter that I would like to display in the report header. To get both the 'from' and 'to' dates to appear I am trying to write a formula, but keep getting the message "a string is required". My formula is as follows:
"from" + Minimum({?Date Range})+ "to" + Maximum({?Date Range})
Can anyone tell me where I am going wrong?!
Any help gratefully received.
received
KaraPost Author: V361
CA Forum: Formula
You need two Parameters, name one {?MIN_DateRange} and the other , your customer will be prompted for two dates, Min and Max, then change your formula for the header, replace the + with &
"From: " & {?MIN_DateRange} & "to " & {?MAX_DateRange} -
Select parameter in report heading
Hi all,
I have defined a date parameter as
Select-options: S_NACD2 FOR Z_VIEW_GITREPORT-BL_DATE OBLIGATORY. (It is a date type select option)
I have defined report heading as :
CALL FUNCTION 'HR_DISPLAY_BASIC_LIST'
EXPORTING
BASIC_LIST_TITLE = 'GIT Against Import POs'"sy-title
FILE_NAME = 'HR_DISPLAY_BASIC_LIST'
HEAD_LINE1 = GIT_REPORT_ID
HEAD_LINE2 = DATE
HEAD_LINE3 = USER_NAME
HEAD_LINE4 = RECS_FOUND
CURRENT_REPORT = 'HR_DISPLAY_BASIC_LIST'
TABLES
DATA_TAB = IT_GIT
FIELDNAME_TAB = MTAB_FIELDNAMES.
EXIT.
What I want that after heading ''GIT Against Import POs'' , value in S_NACD2 should appear like :
GIT Against Import POs 25.11.2007 31.11.2007.
How can I do that??
Regards,
Aisha Ishrat
ICI Pakistan Ltd.hi Aisha Ishrat
declare a variable
data: loc_variable(200).
then concatenate 'GIT Against Import POs' ' POs' ' 25.11.2007' ' 31.11.2007' into loc_variable.
then pass BASIC_LIST_TITLE = loc_variable.
hope u ll get.
regards
karthik -
Modify/include parameter to contact header in 200 OK response
Hi ALL,
We are using WLSS 2.2.0.
In 200 OK response to INVITE request, need to include a parameter "isfocus" to 200 OK response's CONTACT header.
While trying to change/include parameter, WLSS 2.2.0 throws an exception that "its a system header value, cant change".
Please provide your valuable suggestion on this.
Thanks in advance.
Regards,
Janakiraman NWe do allow adding parameters to the contact header now.
You would be able to do that in wlss3.0 or get a patch from support for wlss22.
cheers,
Mihir -
How can I get query filter dates in report heading?
<p>Hello everybody.</p><p>I'm pretty new at this so I hope this is the place to ask this question.</p><p>I'm trying to create a report in WebI where I want a number of cases sorted by a number of categories and between different dates. The dates are supposed to be selceted at the time you are running the report (like "I want all cases between 2006-03-13 and 2006-05-30). And this is ofcourse done by using the "Finished date" object that I've created in the universe as a filter. </p><p> The dates selected in the query is supposed to be included in the report heading (like "Results of cases between {date 1} and {date 2}". I have been reading the documentation about free cells, but the only thing I've found was about last refresh date and drill level.</p><p> Anyone who understand what I'm talking about <img src="/modules/tinymce/tinymce/jscripts/tiny_mce/plugins/emotions/images/smiley-smile.gif" alt="Smile" title="Smile" width="18" height="18" />and know how I can accomplish this?</p><p>Thanks in advance!</p>
UserResponse(DataProvider([date 1]); "Start date?")
-
Report header is missng while printing or spooling
Hi All,
I have a problem in print a report.its
After getting selection screen of the report ,If i click a print button (it's for execute and print)
the header details are missing in spool ( does not print selection fields of the report are missing in spool).
If i execute the report and got the output ,then i click the print button it's execute properly means in spool i am getting all the output properly ,header details also printed. means selection screen fields means what i entered in selection screen is printing.Its a AVL report.While debugging i am not getting solution.i have investigated in menu painter also.
but i am not getting proper idea to fix the bug.
i am sending the code also.please let me know ASAP
code:
REPORT ZMXXR048 LINE-SIZE 1023 "255 deleted AW2150 GLDK9AAYU9
LINE-COUNT 65
MESSAGE-ID zm
NO STANDARD PAGE HEADING.
*eject
TABLES declaration.
TABLES:ekko, "Purchasing Document: Header
ekpo, "Purchasing Document: Item
a016, "Contract Item AMT25JAN05
a019, "Contract Header AMT25JAN05
t024, "Purchasing Groups
t024e, "Purchasing Organizations
t161, "Purchasing Document Types
t001w, "Plants/branches
lfa1, "Vendor Master (General Section) AMT25JAN05
eket, "Scheduling Agreement Schedule Lines
ekbe, "Purchasing Document: History AMT25JAN05
ekab, "Release Documentation AMT25JAN05
zbsart_doc."Purchasing documents custom structure "GA01
ekkn. "Account Assignment in Purchasing Document "GA19062003
Comment AMT25JAN05
*eject
TYPE-POOLS definition.
TYPE-POOLS slis. "KAK01
*eject
CONSTANTS declaration.
CONSTANTS:
c_t(1) TYPE c VALUE 'T', "AMT25JAN05
c_l(1) TYPE c VALUE 'L',
c_m(1) TYPE c VALUE '4', "AMT25JAN05
c_y(1) TYPE c VALUE 'Y', "AMT25JAN05
c_i(1) TYPE c VALUE 'I',
c_ne(2) TYPE c VALUE 'NE',
c_eq(2) TYPE c VALUE 'EQ', "AMT25JAN05
c_lp(2) TYPE c VALUE 'LP',
c_nb(2) TYPE c VALUE 'NB',
c_ec(2) TYPE c VALUE 'EC',
c_lpa(3) TYPE c VALUE 'LPA',
c_zlp(3) TYPE c VALUE 'ZLP',
c_znba(4) TYPE c VALUE 'ZNBA',
c_mk(2) TYPE c VALUE 'MK', "AMT25JAN05
c_wk(2) TYPE c VALUE 'WK', "AMT25JAN05
c_doqot(1) TYPE c VALUE '"', "AMT25JAN05
c_totals(6) TYPE c VALUE 'TOTALS',
c_x(1) TYPE c VALUE 'X',
c_k(1) TYPE c VALUE 'K', "AMT25JAN05
c_a(1) TYPE c VALUE 'A',
C_S(1) TYPE C VALUE 'S',"insert AW2150 GLDK9AAYU9
c_55(2) TYPE c VALUE '55',
c_56(2) TYPE c VALUE '56',
c_44(2) TYPE c VALUE '44', "AMT25JAN05
c_45(2) TYPE c VALUE '45',
c_1(1) TYPE c VALUE '1',
c_2(1) TYPE c VALUE '2',
c_h(1) TYPE c VALUE 'H',
c_(1) TYPE c VALUE '', "GA18062003.
c_n(1) TYPE c VALUE 'N', "SRI24062003
c_o(1) TYPE c VALUE 'O', "SRI24062003
c_maxdays TYPE p VALUE '93', "GA29072003
c_wk1(10) type c VALUE 'WK1'. "NAR10NOV06
*Begin of Addition by AMT25JAN05
CONSTANTS :
c_3 TYPE i VALUE 3 ,
c_4 TYPE i VALUE 4 ,
c_5 TYPE i VALUE 5 ,
c_8 TYPE i VALUE 8 ,
c_10 TYPE i VALUE 10 ,
c_11 TYPE i VALUE 11 ,
c_12 TYPE i VALUE 12 ,
c_15 TYPE i VALUE 15 ,
c_18 TYPE i VALUE 18 ,
c_20 TYPE i VALUE 20 ,
c_23 TYPE i VALUE 23 , "TUL02022005 "KVI04Feb05
c_40 TYPE i VALUE 40 ,
c_all(4) TYPE c VALUE '&ALL' ,
c_sa(3) TYPE c VALUE '&SA' ,
c_bs(3) TYPE c VALUE '&BS' ,
c_sum(4) TYPE c VALUE '&SUM' ,
c_eb3(4) TYPE c VALUE '&EB3' ,
c_xpa(4) TYPE c VALUE '&XPA' ,
c_omp(4) TYPE c VALUE '&OMP' ,
c_crb(4) TYPE c VALUE '&CRB' ,
c_cre(4) TYPE c VALUE '&CRE' ,
c_ave(4) TYPE c VALUE '&AVE' ,
c_pc10(4) TYPE c VALUE 'PC10' ,
c_coltab(6) TYPE c VALUE 'COLTAB' ,
c_excel(5) TYPE c VALUE 'EXCEL' ,
c_ic1(4) TYPE c VALUE '&IC1' ,
c_dload(5) TYPE c VALUE 'DLOAD' ,
c_refrs(5) TYPE c VALUE 'REFRS' ,
c_waers(5) TYPE c VALUE 'WAERS' ,
c_bprme(5) TYPE c VALUE 'BPRME' ,
c_ekbe(4) TYPE c VALUE 'EKBE' ,
c_meins2(6) TYPE c VALUE 'MEINS2' ,
c_meins3(6) TYPE c VALUE 'MEINS3' ,
c_ekkn(4) TYPE c VALUE 'EKKN' ,
c_ekpo(4) TYPE c VALUE 'EKPO' ,
c_ekko(4) TYPE c VALUE 'EKKO' ,
c_lfa1(4) TYPE c VALUE 'LFA1' ,
c_meins(5) TYPE c VALUE 'MEINS' ,
c_eket(4) TYPE c VALUE 'EKET' ,
c_me33l(5) TYPE c VALUE 'ME33L' ,
c_me23(4) TYPE c VALUE 'ME23' ,
c_bes(3) TYPE c VALUE 'BES' ,
c_bedat(11) TYPE c VALUE 'S_BEDAT-LOW',
c_pur(15) TYPE c VALUE 'PURCHASING DOC.',
c_item(4) TYPE c VALUE 'ITEM' ,
c_doc(8) TYPE c VALUE 'DOC.DATE' ,
c_vendor(6) TYPE c VALUE 'VENDOR' ,
c_vname(11) TYPE c VALUE 'VENDOR NAME' ,
c_plant(5) TYPE c VALUE 'PLANT' ,
c_pdesc(17) TYPE c VALUE 'PLANT DESCRIPTION',
c_sloc(4) TYPE c VALUE 'SLOC' ,
c_pgr(3) TYPE c VALUE 'PGR' ,
c_porg(4) TYPE c VALUE 'PORG' ,
c_mat(8) TYPE c VALUE 'MATERIAL' ,
c_standard(8) TYPE c VALUE 'STANDARD' ,
c_matdesc(20) TYPE c VALUE 'MATERIAL DESCRIPTION',
c_deldate(13) TYPE c VALUE 'DELIVERY DATE' ,
c_qty(13) TYPE c VALUE 'SCHEDULED QTY' ,
c_quom(4) TYPE c VALUE 'OUOM' ,
c_net(9) TYPE c VALUE 'NET PRICE' ,
c_curr(4) TYPE c VALUE 'CURR' ,
c_per(3) TYPE c VALUE 'PER' ,
c_opuom(5) TYPE c VALUE 'OPUOM' ,
c_grqty(6) TYPE c VALUE 'GR QTY' ,
c_gruom(6) TYPE c VALUE 'GR UOM' ,
c_irqty(6) TYPE c VALUE 'IR QTY' ,
c_iruom(6) TYPE c VALUE 'IR UOM' ,
c_trnum(15) TYPE c VALUE 'TRACKING NUMBER' ,
c_rec(12) TYPE c VALUE 'RECEIVER-BBP' ,
c_tcont(18) TYPE c VALUE 'T_CONDITIONS-EBELN' .
*End of Addition by AMT25JAN05
*BEGIN INSERT BB1097 - add a constant for the vendor mat field
CONSTANTS C_VENDMAT(15) TYPE C VALUE 'VENDOR MATERIAL'.
*END INSERT BB1097
*eject
DATA Work fields definition.
DATA : w_repid LIKE sy-repid,
w_color TYPE i,
w_info LIKE sy-lisel, "AMT25JAN05
w_lifnr LIKE eina-lifnr, "AMT25JAN05
w_matnr LIKE eina-matnr, "AMT25JAN05
w_werks LIKE marc-werks, "AMT25JAN05
w_tabkey LIKE cdpos-tabkey, "AMT25JAN05
w_objectid LIKE konp-knumh, "AMT25JAN05
w_len TYPE i , "AMT25JAN05
w_field LIKE konp-kopos, "AMT25JAN05
w_eindt LIKE eket-eindt, "AMT25JAN05
w_ebeln LIKE ekko-ebeln, "ujo1jul
zsort(6) TYPE c, "KAK01
w_fldname(20) TYPE c, "GA16062003.
w_titel LIKE spop-titel, "GA25062003.
w_text1 LIKE spop-textline1, "GA25062003.
w_text2 LIKE spop-textline2, "GA25062003.
W_FLAG(1) TYPE C, "KVI04Feb05
Start of GLDK9A8WWS (AS3848)
Defined variable for line size.
w_linsz LIKE sy-linsz.
End of GLDK9A8WWS (AS3848)
DATA: date_diff LIKE ekko-aedat.
*BEGIN OF SRI26062003
*DATA: w_s1 LIKE ekbe-menge, AMT25JAN05
w_s2 LIKE ekbe-bamng, AMT25JAN05
w_s3 LIKE ekbe-bpmng, AMT25JAN05
w_s4 LIKE ekpo-netpr. AMT25JAN05
w_s5 LIKE ekkn-wempf. AMT25JAN05
w_s6 LIKE ekpo-webaz, AMT25JAN05
*END OF SRI26062003
*eject
DATA Structure definition.
DATA: e_coltab TYPE slis_specialcol_alv.
*eject
DATA Internal table definition with INCLUDE STRUCTURE
*Begin of comment by AMT25JAN05
*DATA: BEGIN OF ibdcdata OCCURS 0.
INCLUDE STRUCTURE bdcdata.
*DATA: END OF ibdcdata.
*End of comment by AMT25JAN05
*eject
DATA Other internal table definition.
DATA: BEGIN OF t_documents OCCURS 0, "Main initial internal table
ekgrp LIKE ekko-ekgrp,
ekorg LIKE ekko-ekorg,
eknam LIKE t024-eknam,
ebeln LIKE ekko-ebeln,
ebelp LIKE ekpo-ebelp,
lgort LIKE ekpo-lgort,
kschl LIKE a016-kschl,
datbi LIKE a016-datbi,
datab LIKE a016-datab,
LOEKZ LIKE EKPO-LOEKZ, "insert AW2150 GLDK9AAYU9
infnr LIKE ekpo-infnr,
pstyp LIKE ekpo-pstyp,
konnr LIKE ekpo-konnr,
ematn LIKE ekpo-ematn,
txz01 LIKE ekpo-txz01,
werks LIKE ekpo-werks,
aedat LIKE ekpo-aedat,
epstp LIKE rm06e-epstp,
lifnr LIKE ekko-lifnr,
waers LIKE ekko-waers, "SRI26062003
name1 LIKE lfa1-name1,
name2 LIKE t001w-name1,
ktmng LIKE ekpo-ktmng,
meins LIKE ekpo-meins,
meins2 LIKE ekpo-meins, "GA23062003
meins3 LIKE ekpo-meins, "GA23062003
bednr LIKE ekpo-bednr,
loevm_ko LIKE konp-loevm_ko,
bsart LIKE ekko-bsart,
eindt LIKE eket-eindt, "SBH01
netpr LIKE ekpo-netpr, "SBh01
peinh LIKE ekpo-peinh, "GA01
bprme LIKE ekpo-bprme, "GA01
menge LIKE ekpo-menge,
menge2 like ekbe-menge, "GA23062003.
bamng LIKE ekbe-bamng, "GA23062003.
bpmng LIKE ekbe-bpmng,
vgabe LIKE ekbe-vgabe, "GA01
webaz LIKE ekpo-webaz,
wempf LIKE ekkn-wempf, "GA19062003.
flgdel(1) TYPE c, "ujo9jul
Start of GLDK9A8WWS (AS3848)
Added fields WEPOS (GR indicator), REPOS (IR indicator) and WEBRE (GR-
based IV indicator).
wepos LIKE ekpo-wepos, "GR indicator
repos LIKE ekpo-repos, "IR indicator
webre LIKE ekpo-webre, "GR-based IV indicator
End of GLDK9A8WWS (AS3848)
ELIKZ LIKE ekpo-ELIKZ, "Delivery "TUL02022005
EREKZ LIKE EKPO-EREKZ, "Invoice AW2150 GLDK9AAYU9
*BEGIN INSERT BB1097 - add column for the vendor mat field. this field
will hold the value of the vendor material #
IDNLF LIKE EKPO-IDNLF,
*END INSERT BB1097
END OF t_documents.
Added begin ujo9jul
*DATA: t_documents_tmp LIKE t_documents OCCURS 0 WITH HEADER LINE.
*Comment by AMT25JAN05
*eject
DATA Other internal table definition.
*Begin of Comment by AMT25JAN05
*DATA: BEGIN OF t_ekko OCCURS 0,
ebeln LIKE ekko-ebeln,
bsart LIKE ekko-bsart,
loekz LIKE ekko-loekz,
aedat LIKE ekko-aedat,
lifnr LIKE ekko-lifnr,
ekorg LIKE ekko-ekorg,
ekgrp LIKE ekko-ekgrp,
waers LIKE ekko-waers,
name1 LIKE lfa1-name1,
END OF t_ekko.
*End of Comment by AMT25JAN05
Added end ujo9jul
*Begin of SRI26062003
DATA:BEGIN OF t_t024 OCCURS 0 ,
ekgrp LIKE t024-ekgrp,
eknam LIKE t024-eknam,
END OF t_t024.
DATA:BEGIN OF t_t001w OCCURS 0 ,
werks LIKE t001w-werks,
name1 LIKE t001w-name1,
END OF t_t001w.
*End of SRI26062003
DATA: BEGIN OF t_conditions OCCURS 0, "Main final internal table
ebeln LIKE ekpo-ebeln,
ekgrp LIKE ekko-ekgrp,
ekorg LIKE ekko-ekorg,
waers LIKE ekko-waers, "SRI26062003
eknam LIKE t024-eknam,
ebelp LIKE ekpo-ebelp,
lgort LIKE ekpo-lgort,
kschl LIKE a016-kschl,
datbi LIKE a016-datbi,
datab LIKE a016-datab,
infnr LIKE ekpo-infnr,
pstyp LIKE ekpo-pstyp,
konnr LIKE ekpo-konnr,
ematn LIKE ekpo-ematn,
txz01 LIKE ekpo-txz01,
werks LIKE ekpo-werks,
aedat LIKE ekpo-aedat,
epstp LIKE rm06e-epstp,
lifnr LIKE ekko-lifnr,
name1 LIKE lfa1-name1,
name2 LIKE t001w-name1,
ktmng LIKE ekpo-ktmng,
meins LIKE ekpo-meins,
meins2 LIKE ekpo-meins, "GA23062003.
meins3 LIKE ekpo-meins, "GA23062003.
bednr LIKE ekpo-bednr,
loevm_ko LIKE konp-loevm_ko,
bsart LIKE ekko-bsart,
eindt LIKE eket-eindt,
netpr LIKE ekpo-netpr,
peinh LIKE ekpo-peinh,
bprme LIKE ekpo-bprme,
menge LIKE ekpo-menge,
menge2 like ekbe-menge, "GA23062003.
bamng LIKE ekbe-bamng, "GA23062003.
bpmng LIKE ekbe-bpmng,
vgabe LIKE ekbe-vgabe, "GA01
webaz LIKE ekpo-webaz,
wempf LIKE ekkn-wempf, "GA19062003.
AGING TYPE I, "insert AW2150 GLDK9AAYU9
ELIKZ LIKE ekpo-ELIKZ, "TUL02022005
EREKZ LIKE EKPO-EREKZ, "insert AW2150 GLDK9AAYU9
coltab TYPE slis_t_specialcol_alv, "SRI24062003
*BEGIN INSERT BB1097 - add column for the vendor mat field. this field
will hold the value of the vendor material #
IDNLF LIKE EKPO-IDNLF,
*END INSERT BB1097
END OF t_conditions.
Internal Table for the Purchasing Group name
*Begin of Comment by AMT25JAN05
*DATA: BEGIN OF t_purchgr OCCURS 0,
name2 LIKE t024-eknam,
END OF t_purchgr.
*End of Comment by AMT25JAN05
internal table for the plant name
*Begin of Comment by AMT25JAN05
*DATA: BEGIN OF t_plant OCCURS 0,
name1 LIKE t001w-name1,
END OF t_plant.
*End of Comment by AMT25JAN05
*Begin of Comment by AW2150
Internal Table for the Vendor Number and Vendor Name
*DATA: BEGIN OF t_lfa1 OCCURS 0,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
END OF t_lfa1.
*End of Comment by AW2150
*Start of GA19062003
Internal table for the Good Recipient in case of BBP
DATA: BEGIN OF t_ekkn OCCURS 0,
ebeln LIKE ekkn-ebeln, "SRI26062003
ebelp LIKE ekkn-ebelp, "SRI26062003
wempf LIKE ekkn-wempf,
END OF t_ekkn.
*End of GA19062003
Internal Table for EXCEL DOWNLOADING
DATA: BEGIN OF t_conditions_exe OCCURS 0,
ebeln(15) TYPE c,
ebelp(11) TYPE c,
aedat(11) TYPE c,
lifnr(16) TYPE c,
name1(35) TYPE c,
werks(5) TYPE c,
name2(30) TYPE c, "GA16062003.
lgort(4) TYPE c,
ekgrp(3) TYPE c,
ekorg(4) TYPE c,
" eknam(30) type c, "GA16062003.
ematn(20) TYPE c,
txz01(40) TYPE c,
*BEGIN INSERT BB1097 - this field will hold the value of the vendor
material #
IDNLF(35) TYPE C,
*END INSERT BB1097
eindt(13) TYPE c,
menge(13) TYPE c,
meins(4) TYPE c,
netpr(11) TYPE c,
waers(5) TYPE c, "ujo7jul
peinh(4) TYPE c,
bprme(4) TYPE c,
menge2(11) type c,
bamng(11) TYPE c,
meins2(6) TYPE c,
bpmng(11) TYPE c,
meins3(6) TYPE c,
bednr(21) TYPE c,
wempf(12) TYPE c, "GA19062003.
AGING(7) TYPE C, "insert AW2150 GLDK9AAYU9
ELIKZ(23) TYPE c, "TUL02022005
EREKZ(23) TYPE C, "insert AW2150 GLDK9AAYU9
END OF t_conditions_exe.
*eject
*INTERNAL TABLE TO FIND THE RECEIVED AND INVOICED QUANTITY
DATA: BEGIN OF t_ekbe OCCURS 0,
ebelp LIKE ekbe-ebelp,
ebeln LIKE ekbe-ebeln,
vgabe LIKE ekbe-vgabe,
BELNR LIKE EKBE-BELNR,
*Begin Of Change BH9511 20-Aug-07
menge LIKE ekbe-menge,
menge(16) TYPE P DECIMALS 3,
*End Of Change BH9511 20-Aug-07
shkzg LIKE ekbe-shkzg,
END OF t_ekbe.
*INTERNAL TABLE TO FIND THE RECEIVED AND INVOICED UoM
DATA: BEGIN OF t_ekbe_temp OCCURS 0,
ebelp LIKE ekbe-ebelp,
ebeln LIKE ekbe-ebeln,
vgabe LIKE ekbe-vgabe,
menge LIKE ekbe-menge,
END OF t_ekbe_temp.
Added begin ujo7jul
DATA: BEGIN OF t_totals OCCURS 0,
menge LIKE ekpo-menge,
meins LIKE ekpo-meins,
bamng LIKE ekbe-bamng,
meins2 LIKE ekpo-meins,
bpmng LIKE ekbe-bpmng,
meins3 LIKE ekpo-meins,
END OF t_totals.
DATA: BEGIN OF t_tot_netpr OCCURS 0,
netpr LIKE ekpo-netpr,
waers LIKE ekko-waers,
END OF t_tot_netpr.
DATA: BEGIN OF t_tot_peinh OCCURS 0,
peinh LIKE ekpo-peinh,
bprme LIKE ekpo-bprme,
END OF t_tot_peinh.
*Begin of Comment by AW2150
*DATA: BEGIN OF t_eket OCCURS 0,
ebeln LIKE eket-ebeln,
ebelp LIKE eket-ebelp,
eindt LIKE eket-eindt,
END OF t_eket.
Added end ujo7jul
*End of Comment by AW2150
BEGIN OF KAK01
FOR ALV Related Details.
DATA: alv_fieldcat TYPE slis_t_fieldcat_alv,
alv_layout TYPE slis_layout_alv,
alv_exclude TYPE slis_t_extab,
alv_sort TYPE slis_t_sortinfo_alv,
g_variant LIKE disvariant,
gx_variant LIKE disvariant,
gt_event_exit TYPE slis_t_event_exit, "GA23062003.
g_save(1) TYPE c, "GA23062003.
g_exit(1) TYPE c, "AMT25JAN05
lt_dynpread LIKE dynpread OCCURS 1 WITH HEADER LINE,"AMT25JAN05
g_repid LIKE d020s-prog,
END OF KAK01
Start of GLDK9A8WWS (AS3848)
Added the definition of structure for the events that will be used
in the logic for generating the standard report header for the report.
v_events TYPE slis_t_event.
End of GLDK9A8WWS (AS3848)
*eject
PARAMETERS and SELECT-OPTIONS definition
Start of GLDK9A8WWS (AS3848)
Changed the text-100 in the list of text elements. It was changed
from OPEN PURCHASE DOCUMENTS LIST DISPLAY to Open Purchaser Order
Report.
SELECTION-SCREEN: BEGIN OF BLOCK three WITH FRAME TITLE text-100.
End of GLDK9A8WWS (AS3848)
SELECTION-SCREEN: BEGIN OF BLOCK one WITH FRAME TITLE text-060.
SELECT-OPTIONS : s_ekorg FOR ekko-ekorg OBLIGATORY MEMORY ID eko
NO INTERVALS,
s_lifnr FOR ekko-lifnr,
s_werks FOR ekpo-werks MEMORY ID wrk,
s_ekgrp FOR ekko-ekgrp MEMORY ID ekg
NO INTERVALS,
s_ebeln FOR ekko-ebeln MEMORY ID bes,
s_ebelp FOR ekpo-ebelp MEMORY ID bsp,
s_bsart FOR zbsart_doc-bsart MEMORY ID bsa,"GA01
s_pstyp FOR ekpo-pstyp,
s_loekz FOR ekko-loekz,
s_knttp FOR ekpo-knttp MEMORY ID knt,
s_matnr FOR ekpo-matnr MEMORY ID mat,
s_matkl FOR ekpo-matkl MEMORY ID mkl,
start of modifications AW2150 GLDK9AAYU9
s_bedat FOR ekko-bedat OBLIGATORY, "GA29072003
S_BEDAT FOR EKKO-BEDAT,
end of modifications AW2150 GLDK9AAYU9
S_EINDT FOR EKET-EINDT.
PARAMETERS: p_sum AS CHECKBOX, "SRI26062003
start of modification AW2150 GLDK9ABI53
deleted checkbox for manually closed PO
p_pod AS CHECKBOX DEFAULT 'X'."insert AW2150 GLDK9AAYU9
added checkbox for DCI and FI.
P_DCI AS CHECKBOX DEFAULT 'X', "insert AW2150 GLDK9ABI53
P_FI AS CHECKBOX. "insert AW2150 GLDK9ABI53
end of modification AW2150 GLDK9ABI53
SELECTION-SCREEN: END OF BLOCK one .
SELECTION-SCREEN: BEGIN OF BLOCK two WITH FRAME TITLE text-070.
start of insert AW2150 GLDK9ABSZ8
PARAMETERS: P_ALLPO AS CHECKBOX DEFAULT 'X'.
end of insert AW2150 GLDK9ABSZ8
start of insert AW2150 GLDK9AAYU9
this was just moved from the block below. this is not a new
requirement.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT NO-DISPLAY. " ALV Variant
SELECTION-SCREEN COMMENT 47(40) VARNAME FOR FIELD P_VARI.
end of insert AW2150 GLDK9AAYU9
*Start of GA16062003
PARAMETERS: p_qty RADIOBUTTON GROUP qtvl,
p_date RADIOBUTTON GROUP qtvl,
p_date1 RADIOBUTTON GROUP qtvl.
*End of GA16062003
SELECTION-SCREEN: END OF BLOCK two .
start of modification AW2150 GLDK9AAYU9
Start of GLDK9A8WWS (AS3848)
Commented out the following portion of the source code to remove the
field VARIANT under Settings on the report selection screen.
*SELECTION-SCREEN: BEGIN OF BLOCK four WITH FRAME
TITLE text-073. "TUL0202200
*selection-screen: begin of block four with frame title text-1
*Start of GA23062003
*PARAMETERS: p_vari LIKE disvariant-variant NO-DISPLAY. " ALV Variant
*SELECTION-SCREEN COMMENT 47(40) varname FOR FIELD p_vari.
*Select-Options : S_ELIKZ FOR ekpo-ELIKZ . "TUL0202200
End of modification AW2150 GLDK9AAYU9
Ext. check warning ignored for the comment. AMT25JAN05
*SELECTION-SCREEN: END OF BLOCK four.
End of GLDK9A8WWT (AS3848)
*selection-screen: end of block three.
PARAMETERS p_loggrp(4) TYPE c NO-DISPLAY DEFAULT 'PC10'.
SELECTION-SCREEN: END OF BLOCK three.
*End of GA23062003
*eject
*eject
INITIALIZATION
INITIALIZATION.
*Deletion Indicator
s_loekz-low = c_l.
s_loekz-sign = c_i.
s_loekz-option = c_ne.
APPEND s_loekz.
*start of insert AW2150 GLDK9ABSZ8
IF P_ALLPO EQ C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF P_ALLPO NE C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
*end of insert AW2150 GLDK9ABSZ8
*Start of GA23062003
Settings for display variants
*INITIALIZATION. "GA03122003.
g_repid = sy-repid.
g_save = c_a(1).
CLEAR g_variant.
g_variant-report = g_repid.
g_variant-log_group = p_loggrp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc EQ 0.
p_vari = gx_variant-variant.
ENDIF.
varname = gx_variant-text.
VALIDATE INITIAL DATA ENTERED BY THE USERS ***************
*Start of GA29072003.
IF NOT s_bedat IS INITIAL.
Start of GLDK9A8WWS (AS3848)
Changed sequence in subroutine name to comply with coding standards
based on the review tool ZZCHK.
PERFORM f0100_check_s_bedat.
End of GLDK9A8WWS (AS3848)
ENDIF.
*End of GA29072003.
*eject
*start of insert AW2150 GLDK9ABSZ8
AT SELECTION-SCREEN OUTPUT.
IF P_ALLPO EQ C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 0.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF P_ALLPO NE C_X.
LOOP AT SCREEN.
IF SCREEN-NAME EQ 'P_QTY'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE'.
SCREEN-ACTIVE = 1.
ELSEIF SCREEN-NAME EQ 'P_DATE1'.
SCREEN-ACTIVE = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
*end of insert AW2150 GLDK9ABSZ8
*eject
*start of insert by AW2150 GLDK9AAYU9
AT SELECTION SCREEN ON S_EINDT.
AT SELECTION-SCREEN ON S_EINDT.
IF NOT S_EINDT IS INITIAL.
PERFORM F17200_CHECK_S_EINDT.
ENDIF.
*end of insert by AW2150 GLDK9AAYU9
*eject
AT SELECTION SCREEN ON S_EKORG
AT SELECTION-SCREEN ON s_ekorg.
Validate value of purchasing org(s) entered on the selection *
screen by executing subroutine 0100_VALIDATE_PURC_ORG. *
IF NOT s_ekorg IS INITIAL.
PERFORM f0200_validate_purc_org.
ENDIF.
*eject
AT SELECTION SCREEN ON S_EKGRP
AT SELECTION-SCREEN ON s_ekgrp.
Validate value of purchasing group(s) entered on the selection *
screen by executing subroutine 0200_VALIDATE_PURC_GROUP. *
IF NOT s_ekgrp IS INITIAL.
PERFORM f0300_validate_purc_group.
ENDIF.
*eject
AT SELECTION SCREEN ON S_EBELN
AT SELECTION-SCREEN ON s_ebeln.
Validate value of purchase order(s) entered on the selection *
screen by executing subroutine F0310_VALIDATE_PURC_ORDER.
IF NOT s_ebeln IS INITIAL.
PERFORM f0310_validate_purc_order.
ENDIF.
*eject
AT SELECTION SCREEN ON S_WERKS
AT SELECTION-SCREEN ON s_werks.
Validate value of plant(s) entered on the selection *
screen by executing subroutine F0400_VALIDATE_PLANT.
IF NOT s_werks IS INITIAL.
PERFORM f0400_validate_plant.
ENDIF.
*eject
AT SELECTION SCREEN ON S_BSART
AT SELECTION-SCREEN ON s_bsart.
Validate value of Document type(s) entered on the selection *
screen by executing subroutine F0500_VALIDATE_DOC_TYPE.
IF NOT s_bsart IS INITIAL.
PERFORM f0500_validate_doc_type.
ENDIF.
*eject
AT SELECTION SCREEN ON S_PSTYP
AT SELECTION-SCREEN ON s_pstyp.
Validate value of Item Category entered on the selection *
screen by executing subroutine F0600_VALIDATE_ITEM_CATEGORY.
IF NOT s_pstyp IS INITIAL.
PERFORM f0600_validate_item_category.
ENDIF.
*eject
AT SELECTION SCREEN ON S_MATNR
AT SELECTION-SCREEN ON s_matnr.
Validate value of Material Number entered on the selection *
screen by executing subroutine F0700_validate_mat_number
IF NOT s_matnr IS INITIAL.
PERFORM f0700_validate_mat_number.
ENDIF.
*eject
AT SELECTION SCREEN ON S_LIFNR
AT SELECTION-SCREEN ON s_lifnr.
Validate value of Vendor entered on the selection by executing *
subroutine F0800_VALIDATE_VENDOR_NUMBER
IF NOT s_lifnr IS INITIAL.
PERFORM f0800_validate_vendor_number.
ENDIF.
*eject
AT SELECTION SCREEN ON S_MATKL
AT SELECTION-SCREEN ON s_matkl.
Validate value of material group entered on the selection screen *
by executing subroutine F0900_validate_mat_group.
IF NOT s_matkl IS INITIAL.
PERFORM f0900_validate_mat_group.
ENDIF.
*eject
AT SELECTION SCREEN ON S_KNTTP
AT SELECTION-SCREEN ON s_knttp.
Validate the value of account assignment category entered on the *
selection screen by executing subroutine 1000_validate_mat_group. *
IF NOT s_knttp IS INITIAL.
PERFORM f1000_validate_***_category.
ENDIF.
*eject
AT SELECTION SCREEN ON S_EBELP
AT SELECTION-SCREEN ON s_ebelp.
Validate the value of PO line item entered on the *
selection screen by executing subroutine F1100_VALIDATE_PO_ITEM.
IF NOT s_ebelp IS INITIAL.
PERFORM f1100_validate_po_item.
ENDIF.
*eject
AT SELECTION SCREEN ON S_LOEKZ
AT SELECTION-SCREEN ON s_loekz.
Validate the value of deletion indicator enterd on the selection *
selection screen by executing subroutine F1200_VALIDATE_DEL_IND.
IF NOT s_loekz IS INITIAL.
PERFORM f1200_validate_del_ind.
ENDIF.
Start of GLDK9A8WWS (AS3848)
Commented out the following block of code as a result of the removal
of the field VARIANT from the selection screen.
*at selection-screen on value-request for p_vari.
perform 14000_f4_for_variant.
End of GLDK9A8WWS (AS3848)
*Start of deletion AW2150
*eject
Block Added From Here TUL02022005
AT SELECTION SCREEN ON S_ELIKZ
*AT SELECTION-SCREEN ON s_ELIKZ.
Validate the value of Delivery Completed Indicator entered.
IF NOT s_ELIKZ IS INITIAL.
Check the Valid Values.
IF not SPACE in S_ELIKZ
AND not C_X in S_ELIKZ .
MESSAGE e999 WITH
'Invalid Delivery Completed Flag entered'(006).
ENDIF.
ENDIF.
Block Added Till Here TUL02022005
*End of deletion AW2150
*eject
AT SELECTION SCREEN
AT SELECTION-SCREEN.
PERFORM f15000_pai_of_selection_screen.
*End of GA23062003
start of insert AW2150 GLDK9AAYU9
IF S_BEDAT IS INITIAL
AND S_EINDT IS INITIAL.
MESSAGE E999 WITH TEXT-E01.
ENDIF.
end of insert AW2150 GLDK9AAYU9
MAIN PROCESSING **
*eject
START-OF-SELECTION.
START-OF-SELECTION.
Store report name and report size into temp. varaibles for later use.
w_repid = sy-repid.
Select OAs and Info Records to be displayed into internal table
PERFORM f2000_get_pos.
Store data into final reporting internal table
PERFORM f3000_store_data.
Begin of KAK01
Start of GLDK9A8WWS (AS3848)
Calls the subroutine for building the event catalog for ALV. This
event catalog will be used in the function module that will generate
the ALV report. Logic will eventually be used for the generation of
the standard report header on top of each page.
CLEAR v_events.
w_linsz = sy-linsz.
PERFORM f17100_build_events USING v_events.
End of GLDK9A8WWS (AS3848)
Use ALV instead of normal list.
Write data to the screen.
Populate ALV Field Category Structure.
PERFORM f8000_field_cat.
Populate ALV Exclude Structure.
PERFORM f9000_alv_exclude.
*eject
END-OF-SELECTION.
END-OF-SELECTION.
Begin of KVI04Feb05
IF W_FLAG EQ C_X.
CLEAR W_FLAG.
STOP.
ENDIF.
End of "KVI04Feb05
Display Report.
PERFORM f10000_call_disp.
*eject
AT USER-COMMAND .
*AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXEL'.
PERFORM F5000_DOWNLOAD_TO_EXCEL.
WHEN 'CLIK'.
IF SY-LISEL+1(2) EQ '45'.
PERFORM F6000_see_po_details.
ELSE.
PERFORM F7000_see_oa_details.
ENDIF.
ENDCASE.
End of KAK01
*eject
Form(s)/Subroutine(s) ************************
*Start of GA29072003.
*& FORM F0100_CHECK_S_BEDAT
Check if user entered appropriate date values as selection criteria *
----Hi!
After you click on the printer icon, a popup will apeear. Depends on the SAP system version, you are using, somewhere on the popup, you can find a filed, which is called SAP COVER PAGE.
Here you can choose, coverpage, without cover page, or standard cover page.
Regards
Tamá -
Display multiple parameters in report header
i am attempting to display a multiple parameter selection in my report header
i user
join({?parameter},",")
in the stored proc it is a varchar
in the formula editor i receive this error
a string array is required here
what do i need to do to display the selected parameter values
i have used this function before with varchars and have had no problemsi used the following syntax in my sp which produced the correct results. i just placed the parameter in the header without using the join function and it works like a charm.
ALTER PROCEDURE [dbo].[Pr_orn_whse_rcpts]
(@From_Crt_Dte datetime ,
@To_Crt_Dte datetime,
@whse varchar(90))
AS
CREATE TABLE #T_Localwhs
warehouse varchar(6) null
DECLARE
@var varchar(6),
@i numeric,
@whs varchar(6),
@chk numeric
SET @i = 1
SET @var = (charindex(',',@whse))
IF @var <> 0
BEGIN
WHILE (@i < @var)
BEGIN
--SET @var = (CHARINDEX(',',@whse))
SET @whs = LTRIM(LEFT(@whse, (@var-1)))
INSERT #T_Localwhs (warehouse) VALUES (@whs)
SET @whse = RIGHT(@whse, (LEN(@whse)-@var))
SET @var = (CHARINDEX(',',@whse))
END
INSERT #T_Localwhs (warehouse) VALUES (LTRIM(@whse))
END
ELSE
BEGIN
INSERT #T_Localwhs (warehouse) VALUES (LTRIM(@whse))
END
then you add a nested query to join it to the sp. as below. above your where statement.
JOIN
SELECT DISTINCT
Warehouse
FROM #T_Localwhs
) TW
ON in_wthdr_tbl.in_wthdr_frwhs = TW.warehouse
WHERE -
Need help showing multiple parameters in a report header
Post Author: Annette
CA Forum: Formula
hi-- i am new to this and i have created a report where the person picks one or more items (they are different hospital suites) and i need for them to print on the report header all of the selections that they chose. right now it only prints the name of the first one they choose..
any help would be good..
i do know it's a string value....
thank-you for anything you can help me with....
basically if 1 is picked then it needs to state that name, if 2 or more are picked id like it to say Name, name, name, etx...Post Author: Annette
CA Forum: Formula
the actual parameter is a number, but what im trying to populate on the heading is the name of the number..
for example... when you choose the resource unit of 31 when you refresh i want it to show the name of it which is ORA Surgery.... but if they choose 31 & 53 then id like it to show ORA Surgery, ORD Surgery.... right now it just pulls the first name choosen.. does that make sense..
so the parameter is a number, but the name(the one i want populated) is a string
and oh gosh,, thanks for your quick responses.. -
Paramteter in Portal Report Header
Hi
Is there a a way of showing the parameter that a user enters in
a report header, perhaps with some text
eg given the query
select * from SCOTT.EMP
where DEPTNO = :department
I would want to show something like 'Department is :':department
number in the page header of the report, and hide deptno in the
result set displayed. I am trying to emulate something similar
to the way that Discoverer users 'Page items'.
Thanks in advance
TimTo display the parameter, you could enter the following code
into the '...After displaying the header' event on the PL/SQL
tab.
htp.prn(htf.bold('Department is ')
||portal30.wwv_name_value.get_string( l_arg_names,
l_arg_values, 'department'));
htp.br;
Then just change the display type of Department to Hidden.
Hope this helps. -
Hide/show text boxes in report header
Hi All,
I'm trying to implement a request to have a tablix header frozen in excel. So, I'm placing it in the report header as text boxes. However, there are two different tablixes (a one per page) with two different headings. I'm trying to place those two headings
into two rectangles in the report header hiding and showing a one of it based on the Page No. It works but only for the first tablix heading as it's shown on the first page and hidden on the second page. But, the second tablix heading is not shown on the second
page for some reason. It's probably due to the Page No rendering is going later than the text boxes appearances on the second page or something else causing it.
I did try to use the Global Page No in if visibility statement for those two rectangles, trying to get Page No through a function, using it as a parameter, but nothing is making the second rectangle to show on the second page report header.
Please, help with how it could be done.
ThanksHi al-dol,
Per my understanding that you have put the textbox in the page header to display the table head instead of in the tablix thus you will got the frozen head when export to excel, you have two table header, so you need to add two rectangle to display both in
two different page, now the issue is the second page header didn't display, right?
I have testted on my local environment and can reproduce the issue, the issue can be caused by when you move the rectangle2 on the position of the rectangle1 then the rectangle becomes the child of rectangle1 but not the child of page header thus you will
not shown the rectangle2.
Please check the details information below to see if you have got the rectangle2 inside the rectangle1 like below:
if so, please move the rectangle2 one time and check to make sure you got the "Page Header" in the parent section of both rectangle:
Please also make sure you have use below expression to show/hide the rectangle:
rectangle1:
=iif(Globals!PageNumber=1,false,true)
rectangle2:
=iif(Globals!PageNumber=2,false,true)
If you still have any problem, please feel free to ask.
Regars,
Vicky Liu
Vicky Liu
TechNet Community Support -
How to show sysdate in report header
Hi everyone
i want to show the Sysdate option in my report header.
i have been looking around and i found out that i have to add {$SYSDATE()$} to my report default value, the issue is
1) cant find where is my default value so i can edit it
2) is there anyway that i can write this comman {$SYSDATE()$} in my header and it will call the system date ?
thanksIn the Data Model Editor go to Parameters.
Create a New Parameter
1. Give it a Name P_Sysdate
2 set Data Type to Date
3 Set Default Value to {$SYSDATE()$}
when you create you XML it should look like
<!--Generated by Oracle BI Publisher 11.1.1.6.7-->
<DATA_DS>
<P_SYSDATE>2013-07-03T01:00:00.000-04:00</P_SYSDATE>
<G_1> -
Excel export contains a blank row for the Report Header
Hi,
I am getting a blank row as the first row in my SSRS report when exported to excel. I have already taken care of following things,
1. I have hidden all of the Page Header items using Globals
2. The position of Report Body Tablix is 0, that means there is no space between report header and Report Body.
I have developed this Report in SSRS 2012, please let me know if any more details are required. I think even after hiding Header Items, excel creates a placeholder for page header. I can't remove header from my reports as it is needed to be published in
pdf.
Regards
MohitHi Mohit,
According to your description, you are getting a blank row as the first row in your excel report when you export the report to excel, you have hidden all the items in the Page Header by using the Globals, right?
This blank row is for the page header, although you have hidden all the items in it, but it will still display when export report to excel. Because we can’t hidden the page Header directly. Normally, we can hidden all the items in the page Header, So in
the design phase we can also see the blank area above the report body when preview.
We have an alternative way by add the “SimplePageHeaders” setting in “RSReportserver.config” file, after configuration the page Header will not display in the first row of the worksheet but is rendered to the Excel page header. In Reporting Services, the
“SimplePageHeaders” default value is “FALSE” and it indicates that the page header is rendered to the first row of the worksheet. In order to display the page header in the Header/Footer section of Excel, we need to set the “SimplePageHeaders” setting value
to “TRUE”. I did a test on my local machine and here are my steps:
Navigate to RSReportserver.config file: <drive:> Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\RSReportserver.config.
Backup the RSReportserver.config file before modify it, open the RSReportserver.config file with Notepad format.
Set the Excel rendering extension code like this:
<Render>
<Extension Name="EXCELOPENXML" Type="Microsoft.ReportingServices.Rendering.ExcelOpenXmlRenderer.ExcelOpenXmlRenderer,Microsoft.ReportingServices.ExcelRendering">
<Configuration>
<DeviceInfo>
<SimplePageHeaders>TRUE</SimplePageHeaders>
</DeviceInfo>
</Configuration>
</Extension>
</Render>
4. Save the RSReportserver.config file.
Note: Changing the rendering extension parameters only affects rendering operations on the Report Server.
When I access to Report Manager and export the report(includes a page header) to Excel format, the blank row will disappear now.
Similar thread for your reference:
SimplePageHeader property in SSRS 2008 not working
Removing 2 top blank rows when export to excel in ssrs 2008
r2 report
You can find more detail in these articles about the page header and page footer:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you still have any question, please feel free to ask.
Regards
Vicky Liu -
Displaying Date Parameters in Report Heading
Post Author: Jim-1003
CA Forum: Formula
Hello,
I am new to Crystal Reports, and I am trying to improve an existing report definition so that the beginning and end dates selected by the user are displayed as part of the report heading. I saw something similar in the report samples, but the sample uses custom functions that apply only to that report -- cdFormatDateRange and cdSpecialDateRange. I have not found any documentation on how those functions were created or how to use them. Any help you can give me would be greatly appreciated!
Thanks,
JimPost Author: Jim-1003
CA Forum: Formula
After some digging, I did find out more. First of all, in the options for my Parameter, the option to allow multiple entries was set to true, so I didn't really have a range, but an array of ranges, which confused the editor.
Second, I finally did find the source code for cdFormatDateRange, which allowed me to reuse it by copying it into the clipboard and pasting it into my report. -
Report header to display dimensions
All,
I am trying to make the text box in my report header display member names of our C2 dimension, which is departments. This dimension is in a column which has a prompt for values. When the report is ran, I would like users to be able to select departments and have the header display the chosen departments. The following syntax displays only the first member selected in the prompt, and not every member selected:
<<GetHeading("Grid1",1,A,3)>>
Any suggestions to pull in the missing members?
JimI have often had to experiment with the location criteria in text functions depending on the info and the location of the formula. Try different combinations of the col, row and page info being included.
Maybe you are looking for
-
Graphics problem with mbp late 2008,nvidia geforce 8600m gt.any help?
Hi,have graphics problems with my MacBook Pro 17" Late 2008.Every 3-4 days the graphics are not ok and when i want to restart there is only the apple logo but not clear and the cursor seems to be double.Sory my english is not the best.Any help for th
-
Logic 7.1.x and Korg software M1
I used Korg softsyn M1 as one of AU plug-in in Logic pro 7.1.1 I found the patch (sound instrument) and other parameters could not be changed (or freezed) when the Korg M1 is in multi-channel mode (8 channels). Any ideas? Howard
-
How to get GUID_ZONE for Transport Zone bapi
Can any one please tell me how to get GUID_ZONE so that I can use it in BAPI /SCTM/BAPI_ZONE_SAVEMULTI std transaction (t.code - /n/scmtms/zone) is getting it from somewhere but i am not able to find out. Please help.
-
I had a interesting thing happen after I upgraded to 10.8, here is the sequence of events: I down loaded Mountain lion and upgraded Pages, Keynote & iPhoto. After all where installed I ran iPhoto and I got a blueish cast over the whole screen, I quit
-
IPhoto does not recognize formate of photos after lost os x 10.9 update
I have a macbook pro after last update iphoto does not recognize the formate of a lot of my pictures.