Including SAP-Client in Service-Settings?

Hi,
i try to connect to cFolders-Settings using Portal Drive, but i need to switch between two different SAP-Clients on the same server. How can i tell the Portal Drive to connect to a specific SAP-Client?
Thanks a lot!

The configuration is okay,
i try connecting to Service /default_host/sap/bc/kw/cfs. This works for standard SAP-Client 001. But now i try to connect to cfolders-Settings (Service /default_host/sap/bc/kw/cfs) for SAP-Client 421. Do i have to create an external alias?

Similar Messages

SAP clients on a terminal services

How do you setup SAP clients on a terminal services? I want to deploy SAP 2007A (5 licenses) on a windows 2008 server running terminal services.

Your question is not very clear. If I understand you correctly, you just need to install B1 client on the Terminal Server to connect to B1 database.
Thanks,
Gordon

Min.Internet bandwidth for SAP clients with Windows Terminal Services (RDP)

Dear all,
what is a minimum/recommended Internet bandwidth for client who are using SAP client with RDP (SAP client is connecting directly via RDP session to remote SAP server).
regards
GN
Edited by: Grzegorz Niecka on Aug 4, 2011 10:36 AM

Hi GN.......
It is recommended to have 1 Mbps speed of Internet in order to connect SAP Client from its destination to server if you are using Terminal server or VPN.......
If you still not getting proper connectivity you may increase it to 2 Mbps........
Regards,
Rahul

Adapter_plain service settings

Hi,
We have a user logged on to XI client 100 and he is trying to test the "adapter_plain" service. He tries tcode: sicf>default_host>SAP>xi>adapter_plain--> right click test service --> and he gets logon screen trying to connect to cleint 000 instead of 100. The logon prompt him "A username and password are being requested by http://misap-pid01.usasap.ngkusa.com:50000. The site says: "SAP NetWeaver Application Server [PID/000]".
However, the url page shows as client 100 --> http://misap-pid01.usasap.ngkusa.com:50000/sap/xi/adapter_plain?sap-client=100
The question is, where can I maintain the settings of adapter_plain for the correct client logon?
Why is the log on trying to connect to 000 and the url page shows 100? How can I fix this issue?

Also, In addition to the previous problem, when I do the test for adapter_plain service in TCODE: SICF by right clicking it and select test service and then I enter user: j2ee_admin and pw, i access the page but at the bottom of the page it says "stopped". What could this status "stopped" mean?

No RFC destination is defined for SAP Global Trade Services

Hi Team,
I am getting error No RFC destination is defined for SAP Global Trade Services while transferring master data from one ECC Client to GTS.
Both clients has built in GTS. The situation is like this.... Client A which has ECC & GTS and Client B also has ECC and GTS. Client B we are intended
to use only for GTS. This is basically for proto type purpose we need to establish connectivity between A and B. B we intended to use as a feeder system
1) All the three BADI'sin SD0A,SD0B and SD0C level activated
SLL_PI_SD0A_TRANSFER
SLL_PI_SD0B_TRANSFER
SLL_PI_SD0C_TRANSFER
2) /SAPSLL/RFC_DEST Badi also active
I asked BASIS people to check in SM59 Client A is connected with Client B (here Client B as RFC destination) even connection test / remote logon also
tested and it is working between A an B
Where i am missing
Regards,
Ramji

Hi Dave,
Thanks for your reply.Sorry i forgot to include in my points already done.
BD97
BD64
Just to clarify one more point
sender should be EH6CLNT800 (ECC)
Receipient should be EICCLNT800 (GTS). Is it correct
Regards,
Ramji

SAP Client login problem

Hi All,
Whenever I am trying to connect to SQL server 2005 from SAP Client machine getting the following error :
Connection failed:
SQLState: '08001'
SQL Server Error: 1326
[Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [1326].
Connection failed:
SQL State: 'HYT00'
SQL Server Error: 0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 1326
[Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that under default settings SQL Server does not allow remote connections.
Regards,
Rupa Sarkar

What are the remote program you are using ? is it VPN, Citrix or Terminal Service ?
SAP B1 supports only citrix or terminal service.
you may also try the solution from this link:
http://blogs.msdn.com/b/sql_protocols/archive/2005/09/28/474698.aspx
JimM

ERROR:com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException

Dear All,
We have taken a par file from another project and deployed in the J2EE engine using SDM.It was succesfully deployed with out any warnings.I have created an iview also.When we are trying to access that i view i am getting an error as follows:
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.dictionary.runtime.DdException: Type com.bel.holidaycal.model.types.Zhrt029 does not exist
    at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
    at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
    at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
    at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
    at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
    ... 51 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type     HTML Client
User agent     Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Version     null
DOM version     null
Client Type     msie6
Client Type Profile     ie6
ActiveX     enabled
Cookies     enabled
Frames     enabled
Java Applets     enabled
JavaScript     enabled
Tables     enabled
VB Script     enabled
Server
Web Dynpro Runtime     Vendor: SAP, build ID: 7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:41:58[UTC], changelist=413534, host=pwdfm101), build date: Mon Mar 03 21:11:10 GMT+05:30 2008
J2EE Engine     7.00 patchlevel
Java VM     Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system     Windows 2003, version: 5.2, architecture: ia64
Session & Other
Session Locale     en
Time of Failure     Thu Apr 10 14:31:31 GMT+05:30 2008 (Java Time: 1207818091497)
Web Dynpro Code Generation Infos
local/WDHolidayCalendar
SapDictionaryGenerationCore     7.0009.20060802115015.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:24:21[UTC], changelist=413123, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates     (unknown)
SapGenerationFrameworkCore     7.0009.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:12:57[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0009.20060802115035.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:30:00[UTC], changelist=413124, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon     7.0009.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:13:46[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore     7.0009.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:13:38[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary     7.0009.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:21:59[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro     7.0009.20060428190938.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:26:52[UTC], changelist=400815, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:45:29[UTC], changelist=413534, host=pwdfm101)
SapWebDynproGenerationCore     7.0009.20060802115035.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:30:11[UTC], changelist=413124, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:45:29[UTC], changelist=413534, host=pwdfm101)
sap.com/tcwddispwda
No information available     null
sap.com/tcwdcorecomp
No information available     null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type extern:com.bel.holidaycal.model.types.WDModelHolical:com.bel.holidaycal.model.types.Zhrt029 could not be loaded: com.sap.dictionary.runtime.DdException: Type com.bel.holidaycal.model.types.Zhrt029 does not exist
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getStructure(DataTypeBroker.java:305)
     at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:234)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:448)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:386)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:415)
     at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:79)
     at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:121)
     at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:117)
     at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:212)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
     at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
     at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.dictionary.runtime.DdException: Type com.bel.holidaycal.model.types.Zhrt029 does not exist
     at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
     at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
     at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
     at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
     at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
     at com.sap.dictionary.runtime.DdBroker.getStructure(DdBroker.java:180)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getStructure(DataTypeBroker.java:303)
     ... 49 more
I have created the JCO connections also ,i am able to test them also.I have imported the same into NWDS and deployed the application , its deploying but the out put is the same error.
I have cross checked the models and found that the Model is there in the model types.
Can any one help me regarding this.
Waiting for the response ASAP.
Thanks
Ravi.S

Hi,
I think you mean ear file and not par file. Check these threads. The exception is mentioned to be because of JCo problems only.
Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
WDTypeNotFoundException: type model.types.Zbtr_Wbselement could not be load
WebDynpro using BAPI has an error
Regards,
Harini S

Com.sap.tc.webdynpro.services.session.LockExceptio

Hi,
From my WD Java application, i'm calling some URL and displaying the content from that in my WD application.
The performance of this is very slow and it seems to be hang for some time.
Portal version is 7.0 and patch is SP 18.
When i checked the log it throws an exception :
com.sap.tc.webdynpro.sessionmanagement#sap.com/tcwddispwda#com.sap.tc.webdynpro.sessionmanagement.ExceptionHandler.handleThrowable#psaxena#177552##n/a##4b50da90170c11de857c00145e23c9af#SAPEngine_Application_Thread[impl:3]_20##0#0#Error#1#/System/UserInterface#Java###Exception occured during processing of Web Dynpro application . The causing exception is nested.
[EXCEPTION]
#2#sap.com/pb/PageBuilder#com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_20 failed to acquire exclusive lock on client session ClientSession(id=(J2EE12791800)ID1709694850DB02709529586100848222End_5108164). Existing locks: LockingManager(ThreadName:SAPEngine_Application_Thread[impl:3]_20, exclusive client session lock: ClientSessionLock(SAPEngine_Application_Thread[impl:3]_30), shared client session locks: ClientSessionSharedLockManager([]), app session locks: ApplicationSessionLockManager([]), current request: sap.com/pb/PageBuilder).Hint: Take a thread dump of the server node to find the blocking thread that causes the problem.
     at com.sap.tc.webdynpro.clientserver.session.ClientSession$LockingManager.lock(ClientSession.java:1511)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:233)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
Any idea why this problem is coming and what is the solution for this.
Thanks and Regards
Puneet

Hi Puneet,
I am getting same exception in using FileDownload UI element as a Table Cell Editor.
I am loading input stream in FileDownload UI element on demand (that when user actually clicks on download link)
Can you please share what exact optimization you did in code and it worked for you?
Please help me with this issue.
Awaiting for your reply.
Thanks and regards,
Amey Mogare

FPN error: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException

Hi, all.
I am trying to initiate a webdynpro page from the producer to the consume portal via RDL. It works fine for a day. Then it starts giving me the error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page ...
This error cannot be cleared by clearning the FPN cache or synchronize with the producer. Of course, you can also delete the page from the consumer and copy it over from the producer again. It will work. But this is not a good workaround for a production system. We also don't know the cause either. Here is the stack trace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:528)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.portal.fpn.exception.unchecked.FpnUnMarshallingException: Could not find a marshaller for 'com.sapportals.portal.page' from path 'pcd:consumer_content/DEP/portal_content/ca.ottawa.sap.supportcentre/ca.city.ottawa.OttawaRoles/ca.city.ottawa.ManagerInfo/ca.city.ottawa.ManagerInfo-FinanceOnly/ca.city.ottawa.ManagerInfo_MSS_Finance/ca.city.ottawa.Mileage_Parking_Managers'
     at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:323)
     at com.sap.portal.fpn.entrypoint.RuntimeFederatedPersistance.retrieveDLRemoteState(RuntimeFederatedPersistance.java:103)
     at com.sap.portal.fpn.FpnRuntimeService.bringRemoteState(FpnRuntimeService.java:134)
     at com.sap.portal.fpn.FpnRuntimeService.doFpnLookup(FpnRuntimeService.java:97)
     at com.sap.portal.fpnprovider.fpn.GenericContext.lookup(GenericContext.java:49)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:526)
     ... 31 more
Caused by: com.sap.portal.pcm.OperationFailedException: Creating DL outside the PCD
     at com.sap.portal.pcm.iviewserver.CiViewSLObjectsManager.instantiateDescriptor(CiViewSLObjectsManager.java:687)
     at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:79)
     at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:71)
     at com.sap.portal.fpn.marshal.IViewMarshaller.instantiateRelatedItemDescriptor(IViewMarshaller.java:582)
     at com.sap.portal.fpn.marshal.IViewMarshaller.performSemanticActions(IViewMarshaller.java:506)
     at com.sap.portal.fpn.marshal.PageMarshaller.performSemanticActions(PageMarshaller.java:499)
     at com.sap.portal.fpn.marshal.IViewMarshaller.unmarshalResolvedDLChain(IViewMarshaller.java:715)
     at com.sap.portal.fpn.marshal.PageMarshaller.unmarshalResolvedDLChain(PageMarshaller.java:328)
     at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:320)
     ... 38 more
So far I found nothing on OSS or SDN on this FpnUnMarshallingException. Has anyone seen this error before?
Thanks.
Jonathan.
Edited by: Jonathan Ma on Apr 23, 2009 12:25 AM

Hi Jonathan,
you may deactivate the GPN cache as well as the old navigation cache. About the GPN there is note 1172433. Both caches are not used in FPN scenario and can lead to such strange problems. If this won't help please open a support message for this that we can analyse further.
Cheers,
Anja

Com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Instance of vi

I am getting the following exception when I trying to go to Details view from my results view.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Instance of view controller ResultsView does not exist.
     at com.sap.tc.webdynpro.progmodel.controller.Component.getController(Component.java:356)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.handleUIElementEvent(HtmlClient.java:832)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.updateEventQueue(HtmlClient.java:763)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.initEvents(AbstractClient.java:131)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.prepareTasks(AbstractClient.java:99)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:250)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
To explain further, I have 3 views in my webdynpro project, list view, results view and detail view that is embedded in the same window.
In the list view, I have a table of materials with linktoaction event that when clicked will go to detail material view to display material information. In this scenario this is working with no problems for all the items in the list.
When I do the same thing from the result view as the list view, only the first url link action works to display the detail view , the others fail with the above exception.
Any help on resolving this issue is appreciated.
Thanks,
Sunitha.

Ayyapparaj,
The lifespan of ResultsView is "FrameworkControlled".
Following is the code snippet for onclick of a row in the table in the results view,
     IWDMessageManager messageMgr =     wdThis.wdGetAPI().getComponent().getMessageManager();
//     getting the user's assigned SoldTo from the UME profile
      String[] customer = null;
      String SoldTo = null;
      try
                IUser user = WDClientUser.getLoggedInClientUser().getSAPUser();
                IUserAccount[] acct = user.getUserAccounts();
                customer = user.getAttribute(AvailabilityApp.NAMESPACE_LENNOX,AvailabilityApp.ATTR_SOLDTO);
                SoldTo = customer[0];
           } catch (UMException e)
                     // TODO Auto-generated catch block
                     messageMgr.reportException(e.getMessage(),false);
     //create the instance and pass parameters for RFC Z_RFC_HRP_MATERIAL_INFO_Input
     Z_Rfc_Hrp_Material_Info_Input input = new Z_Rfc_Hrp_Material_Info_Input();
     wdContext.nodeZ_Rfc_Hrp_Material_Info_Input().bind(input);
    input.setMatnr(wdContext.currentATP_To_AtpElement().getMatnr().toUpperCase());
    input.setUser_Id(SoldTo);
     //executing the RFC Z_Rfc_Wwhc_Zatp
     wdThis.wdGetAvailabilityAppController().ExecuteZ_RFC_HRP_MATERIAL_INFO();
     wdContext.currentContextElement().setReturnTextDisplay("Availability Results");
     wdThis.wdFirePlugToDetailView();
When it goes to Detail view and try to display the UI bound to the output from the above
Z_RFC_HRP_MATERIAL_INFO() , it shows this error.
Please note that the above code does not fail for the first row of the results table in the results view, but it does for all the others. Is there something that I am missing here ?
Thanks,
Sunitha.

Error During install Exchange 2013 through Powershell on Server 2012 "Mailbox role: Client Access service"

Dear all
During install Exchange 2013 through Powershell on Server 2012 I got this error in Mailbox role: Client Access service :
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MONAMBX2.mona.local/W3SVC/2/ROOT/o
wa' on 'MONAMBX2'.".
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "The operation couldn't be performed because object 'MONAMBX2\OWA (Exchange Back End)' couldn't be fo
und on 'MonaDc1.mona.local'.".
Any advice please !!

I can't answer your question but I had a similar issue when I was trying to move our mailbox database off the C: drive. Our environment still has an Exchange 2007 server in it and when I was trying to move the database on the 2013 server, I would get
error messages saying the database does not exist. It seemed like it was trying to move the database on the 2007 server from the similar error messages that I was getting. To get around it, I deleted the database and created a new one on the drive
where we wanted it.
I discovered this when I was configuring the Antispam settings. I deleted our 2007 settings, added them to the 2013 shell, the settings appeared on our 2007 server. The shell on 2013 was making changes to 2007.
I'm not sure if there is a "Get|Set or New" command that I/we should be using when this happens. Or maybe my issues will be fixed if I just remove the Exchange 2007 server? I'm not ready to do that yet because I can't configure the spam filtering
on 2013 yet with its shell not being able to make the changes that we need.
I don't know if your environment is in coexistence mode like mine.
Hopefully someone else out there has an answer or can tell us when/how the shell can make the appropriate changes to the 2013 server. Does this happen after the 2007 server is removed?

Inter SAP clients FI/CO data transfer

Dear all,
I'm facing an atypic case where my customer is one legal entity but for business reasons has two sap clients. Therefore, FI/CO of both clients have to be interfaced. It includes, AR/AP, incoming payment and COA, vendor, customer master. (for master data can be manual process)
First I was wondering if anyone of you have ever faced such case.
Second I was wondering what would be the most efficient way to handle the interface (Batch input / ALE idocs / XI?)? Knowing that in terms of volume it's about 50 sales invoices a day with pick of 150. Also, taking into account that for credit control issue, night batch would not be acccurate enough.
Finally, how to put in place the trigger that will allow to copy for instance accounting document created in one client to the other one client. (for instance an instruction that will take place at the save of vf01)
Thanks for your help.
Regards.

Hi Venkat,
For FI extraction Please refer:
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
You can find a document in this forum on COPA ,if you search this forum with "CO-PA".
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how%20to%20set%20up%20connection%20co-pa%20-%20extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how%20to%20set%20up%20connection%20co-pa%20-%20retraction
Cheers
Chaithanya

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

Risk Management & Process controls for non SAP client

Hi Forum Gurus,
I need clarity on the following: Can Risk managment 3.0 and Process controls be implemented for a non-SAP client?
i.e. Our client does not run SAP, but they are interested in RM and PC, so is this possible to implement?
Any advice would be highly appreciated.
Kind regards,
PREVO.

Hi Prevo,
Process control and Risk management 3.0 are delivered within same installation package files so it is same for both the applications .
Also real time agents for Oracle or peoplesoft are avaialble if you want to leverage the automated control functionality of PC 3.0 in non SAP environment.
Remember the automated control functionality is the optional feature of PC3.0.If you wish only to use the manual controls features of PC 3.0 you dont need RTAs(real time agent).
You can find further information about manual controls at http://service.sap.com
use the quicklink '/rkt' then the following menu path: SAP Business Objects for GRC Solutions -> SAP BO Process Control 3.0 -> Technology Consultant
Regards
Debraj

SAP BI - Data Services connection

Hello
I am trying to set up SAP BI - Data Services connection.
Couple of questions :
1. Where from within the SAP can I get SAP gateway hostname and SAP gateway service name
2. I have a developer right on BW. Is it enough to make connection with my user id?
3. connection to BW is via client security portal. Does it change the approach?
Thanks

Hi,
1. Where from within the SAP can I get SAP gateway hostname and SAP gateway service name
From the sapgui.
2. I have a developer right on BW. Is it enough to make connection with my user id?
Yes
3. connection to BW is via client security portal. Does it change the approach?
What does that means? you need a user and password in BW (ABAP).
As suggested by Andrei, read the wiki. It has all you need to make it work.
Hope this helps.
Cheers,
Diego

Including SAP-Client in Service-Settings?

Similar Messages

Maybe you are looking for