Including static html file (WebServer) with JSP (App server)?

Hi,
I want to know how can a static html file that runs on a Web Server (iPlanet) in a JSP that runs on an App Server (WebLogic 6.1).
What would be the tag used and how the html file is referenced? Is there any other extra settings involved while integrating iPlanet with WebLogic 6.1?
Responses are highly appreciated.
Thanks and Regards,
Madanlal.

Web servers usually work with the MIME Types. In the mime type settings will determine how a request for a particular mime type is served. Usually HTML, JPG,GIF... are served by the web server itself. A JSP request will be forwarded to the APP Server for peocessing.
The HTML and the image files need to be in a directory visible to the web server from the document root.
See the files
config\mime.types
config\obj.conf
under the web server installation directory.
Refer to the web server's admin guide for more info.

Similar Messages

Problem in integrating sunone webserver with websphere app server

Hello all
I am trying to integrate sunone6.0 webserver with websphere5.0 app server. I did the following changes in sunone6.0 config files
1) Added one directive to the obj.conf file after "<Object name=default>":
Service fn="as_handler"
2) Added two directives to the end of the magus.conf file:
Init fn="load-modules" funcs="as_init,as_handler,as_term" shlib="/opt/WebSphere/AppServer/bin/libns41_http.so"
Init fn="as_init" bootstrap.properties="/opt/WebSphere/AppServer/config/cells/plugin-cfg.xml"
Can any one of u tell me how to check whether sunone webserver is redirecting request to webshere app server?
i tried this url https://sunonewebserver:80/webapps/examples but i was not getting any result of that url.

You might want to check here http://developers.sun.com/prodtech/webserver/
and here http://developers.sun.com/
These have forums and articles devoted to specific Sun products

How to link an APEX button to a HTML file stored on the app server ??

Hopefully this will be simple for someone
We have some very technical word documents that I really didn't want to replicate in oracle reports
So i have saved them as html docs , and when i open then in IE they look fine
I have placed them in the folder where our reports are stored , but I cannot figure out how to create the URL to place behind a button in APEX ??
Obviously the oracle reports url won't work as the uses pdf's and the servlet
Thanks in advance
Chris

Assuming you are using Apache?
You could place your Word docs in the same folder as your current Apex images directory (or a sub-directory off it) then reference them with a URL of the form http://yourserver/i/sample_word_file.doc. Alternatively you could add a new Alias entry to your dads.conf file (found in your Apache/modplsql/conf directory) to expose the folder on your webserver that contains your Word files via a URL such as http://yourserver/word_docs/
E.g.
Alias /word_docs/ "c:\my_docs\technical_word_docs/"
Andy

Including static html outside of docroot

          Has anyone had any luck with including a static html file inside a jsp, using <jsp:include
          .. />? I have had plenty of luck including an html file that is included in the
          .ear file, but I am looking to include a file that is kept outside of the .ear
          file, either in a virtual directory using IIS or maybe in a directory somewhere
          around the config.xml.
          Thanks for any help you may give.
          gmonn


in your filter you may process HTML as is, catch the result, add header/footer etc. and stream the updated result to your users
Dmitry Namiot
http://www.servletsuite.com/

Cannot include a staic file in a JSP

hi everybody,
i have a requeirement as follows.
i need to include a static html file in a JSP which IS NOT IN application server's jsp folder.
i tried specifying actual file path and server's absolute path.
not n use. can some body help me.
application server : iplanet.6 supporting jsp1.0

I hope you are using the file include.
i.e <%include file="C:\myfile" %>
<%@ include file="c:\myfile" %> ... Probably what you meant, but just clearing up any confusion.

Include an HTML file that needs parameters??

I have a JSP that includes an HTML file template.
Lets say I don't know all the contents of the HTML at the time. How do I add it?
Simple Example:
myHTML.html
<HTML>
<HEAD>
<TITLE>myVariablePassedFromJSP</TITLE>
</HEAD>
<BODY></BODY>
<HTML>myJSP.jsp
String title = "My Title To Display";
<%@ include file="myHTML.html" %>
etc...and the result should be
<HTML>
<HEAD>
<TITLE>My Title To Display</TITLE>
</HEAD>
<BODY></BODY>
<HTML>

If the included file can be a JSP instead of a plain HTML file you can use the <jsp:include> tag with parameters. The parameters will become request parameters in the included JSP. You can use them anywhere in the JSP.
e.g.
*** 1.jsp ***
<jsp:include page="2.jsp" flush="true">
<jsp:param name="title" value="the window title" />
<jsp:param name="someBody" value="something for the body" />
</jsp:include>
*** 2.jsp ***
<HTML>
<HEAD>
<title><%= request.getParameter("title") %></title>
</HEAD>
<BODY>
<%= request.getParameter("someBody") %>
</BODY>
</HTML>
Be careful with includes because you can end up with multiple conflicting tags. For example, if 1.jsp has <html>, <head>, and <body> tags, and 2.jsp does, too, then you may run into a problem.

How to include a .class file in a jsp page

hi everyone,
i know the syntax as:
<%@ include file = "filename.class" %>
then at run time the server could not find the class file
if i use,
<%@ page import = "FileName.class" %>
then also the same problem persists
& if i use
<jsp:include page = "Relative address"/>
the problem still remains as it is...
please help me out...i am working on developing an EJB application in which client interacts with server's Stateful session bean through a jsp page...it is necessary for me to include the home interface class file in my jsp page.
P.S. do not suggest me to include the class file in a package & then use
<%@ page import = "packageName.ClassFileName" %>
i
Edited by: Ankit_JIITU on 6 Jul, 2008 1:55 AM

Ankit_JIITU wrote:
i have already included the remote interface class file by <%@ page import = "University.RemoteInterfaceName" %>in my jsp page ...
if i try to make a new package called test & then include my home interface in that package...i need to import University.*to generate the class file of my home interface ; but the class file generation is not taking place as i am getting the error..
"package University does not exist".How can i overcome this problem. The package University, which you are trying to import, must be in the classpath. If you removed it then you will have to add it back.
i have tried my best..but tell me if there's any possible way of including a class file in the jsp page without involving a package.No, there isn't.
If not,then pls help me to generate the class file of my home interface within a package called test.Read the New To Java Tutorial and understand how packages work.
>
i am assuming that u have a deep knowledge of developing EJB applications.

EA Could Not Find The .html File Associated With...

After naming folder names, I now get the "EA could not find the .html file associated with..." message when I open the .edge file. When I open the .an file, I have all elements and the timeline are gone! How can I restore it? Surely, it is just a question of changing a path, or? Please help. Thanks!

From the File > Open menu, browse to the that same folder (the newly renamed one), and select the .html file.
Darrell

Static html file

How do I access an uploaded static html file thru a url? What directory is this file uploaded to?

You'll need to explain what you're trying to achieve.
You can incorporate static HTML in various ways, for example copy and paste (minus header and body tags etc.) into an HTML region, or retrieve from the database (stored as a VARCHAR or CLOB) and htp.p to the browser.
Or there is a very good 'upload/download' how-to if you want to find out about this aspect also.
John.

Possible to associate file extension with webstarted app?

A common property of microsoft apps is to associate file extensions with specifiec apps.
For example, when you double click on a .xl file, Excel is launched.
Can the same kind of thing be done for Webstarted apps? If so how?

I have an idea on how to do this, but I have not tried it.
1. On first launch, the application does an "install" before starting the main screen.
2. The install checks the OS, and writes a .sh or .bat file to disk. That batch file runs the command-line to start the application. Hmm, but how does it pass along $*?
3. The install associates the proper file extension with the .bat file, and/or with the unix file manager software, and/or with IE, Netscape, and Mozilla.
Then, when a user clicks on a link to a document, or a file in the windows explorer, then the JWS application should lanch and load the file(s).

Integrating iPlanet Web Server 6.0 with SunOne App Server 7.0

I am experiencing problems integrating iPlanet Web Server 6.0 with SunOne App Server 7.0
My magnus.conf is
#ServerRoot /usr/iplanet/servers/https-test
ServerID https-test
ServerName sulev016.eur.gep.ge.com
ErrorLog /usr/iplanet/servers/https-test/logs/errors
PidLog /usr/iplanet/servers/https-test/logs/pid
User root
MtaHost localhost
DNS off
Security off
ClientLanguage en
AdminLanguage en
DefaultLanguage en
RqThrottle 128
StackSize 131072
CGIWaitPid on
TempDir /tmp/https-test-ab0d7966
Init fn=flex-init access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length%"
Init fn=load-types mime-types=mime.types
Init fn="load-modules" shlib="/usr/iplanet/servers/bin/https/lib/libNSServletPlugin.so" funcs="NSServletEarlyInit,NSServletLateInit,NSServletNameTrans,NSServletService" shlib_flags="(global|now)"
Init fn="NSServletEarlyInit" EarlyInit=yes
Init fn="NSServletLateInit" LateInit=yes
Init fn="load-modules" shlib="/usr/iplanet/servers/plugins/passthrough/bin/libpassthrough.so" funcs="init-passthrough,auth-passthrough,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
==========================================
my obj.conf is
<Object name=default>
NameTrans fn="assign-name" from="(/OMS|/OMS/*)" name="passthrough"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="pfx2dir" from="/servlet" dir="/usr/iplanet/servers/docs/servlet" name="ServletByExt"
NameTrans fn=pfx2dir from=/mc-icons dir="/usr/iplanet/servers/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr/iplanet/servers/manual/https" name="es-internal"
NameTrans fn=document-root root="$docroot"
PathCheck fn=unix-uri-clean
PathCheck fn="check-acl" acl="default"
PathCheck fn=find-pathinfo
PathCheck fn=find-index index-names="index.html,home.html"
ObjectType fn=type-by-extension
ObjectType fn=force-type type=text/plain
Service type="magnus-internal/jsp" fn="NSServletService"
Service method=(GET|HEAD) type=magnus-internal/imagemap fn=imagemap
Service method=(GET|HEAD) type=magnus-internal/directory fn=index-common
Service method=(GET|HEAD) type=*~magnus-internal/* fn=send-file
AddLog fn=flex-log name="access"
</Object>
<Object name=cgi>
ObjectType fn=force-type type=magnus-internal/cgi
Service fn=send-cgi user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="servlet">
ObjectType fn=force-type type=text/html
Service fn="NSServletService"
</Object>
<Object name="jsp092">
ObjectType fn="type-by-extension"
ObjectType fn="change-type" type="magnus-internal/jsp092" if-type="magnus-internal/jsp"
Service fn="NSServletService" type="magnus-internal/jsp092"
</Object>
<Object name="ServletByExt">
ObjectType fn=force-type type=magnus-internal/servlet
Service type="magnus-internal/servlet" fn="NSServletService"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough" Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://3.224.68.131:81"
Error reason="Bad Gateway" fn="send-error" uri="$docroot/badgateway.html"
</Object>
The requests are not passing through to the app server when i try to access it through port 80.
Presently I am testing my appln over port 81 on the app server.
Thanks and Regards
Vineet Guliani

Each ObjectType and Service directive should begin on a new line. You appear to have placed two directives on a single line.

Best practice when using Tangosol with an app server

Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/Per

Hi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per

Strange Gateway Error with one APP Server (WSAETIMEDOUT)

Hello Everyone,
We are experiencing a strange gateway timeout issue on one application server in our SAP environment. This started happening after we applied a series of Microsoft patches and updated the SAP kernals from 179 (DB 172) to 185 (DB 182).
From this App server we are seeing all kinds of gateway errors, the following is a sample from the dev_rd file from the server in question:
LOCATION    SAP-Gateway on host sappe1exp5 / sapgw00
ERROR       partner 'sappe1exp4:sapgw00' not reached
TIME        Sat May 30 23:40:54 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     67
GwTraceHdlInfo:
HANDLE   = 6
TIME     = Sat May 30 23:40:33 2009
SOCKET   = 468
STAT     = NI_CONN_WAIT
TYPE     = STREAM IPv4
OUT      = 0 messages 0 bytes
IN       = 0 messages 0 bytes
LOCAL    = 0.0.0.0:2604
REMOTE   = -
OPTIONS = BUFFERED
ni hdl      = 6
type        = CLIENT
net_stat    = CONNECT_TO_REM_GW_PENDING
hostaddr    = 10.10.0.21
opcode      = NORMAL_CLIENT
conn opcode = REMOTE_GATEWAY
conn vers   = 105
index       = 59
data        = 0000000000000000
ext_info    = 000000000333DCA0
offset      = 0
rest_len    = 0
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 10.10.0.21
service = sapgw00
tpname   = sapdp00
Sat May 30 23:46:17 2009
***LOG Q0I=> NiPConnect2: connect (10060: WSAETIMEDOUT: Connection timed out) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 428
    (SI_ECONN_REFUSE/10060; I4; ST; 10.10.0.21:3300) [nixxi.cpp    2823]
I have done alot of searching and I have tried the following things:
1) Checked the services file of this machine, they line up with all other systems
2) Attempted to telnet to other App servers on 3200, 3300, 3600 with no success
3) tried to connect via SM59 to another App server with no success
4) Attempted to do all of these things in reverse from the another app server with the same results.
This is only happening with one app server in our landscape and this app server has no issues connecting to the CI.
Any ideas on where I can look further?
Edited by: James Wright on Jun 5, 2009 10:10 PM

Hi,
on sappe1exp5 try the following command in a dos prompt:
telnet sappe1exp4 sapgw00
this should also time out i.e. hang for a certain amount of time (~50 seconds) and then terminate with error.
It simply means that the IP address 10.10.0.21 is not reachable from your client PC.
Maybe you changed some IP addresses during patches. Usually there is an RFC destination that is not functioning properly.
Best regards
Carl Philipp

Problem : App works with Sun App server 8.0 but fails with 8.1

Hi All
     I am experiencing some strange problem with executing my JSF application with Sun App Server.
     I have an EAR deployed on Sun Application Server 8.0 and 8.1.
     Strangely it works quite fine with 8.0 but fails with 8.1.
     In my JSP page ..I have a dummy component whose getter method is used as a "FormLoad" event of the page.
     <h:form id="imageForm" enctype="multipart/form-data">
     <h:messages showDetail="true" />
     <table width="980" border="1" cellpadding="0" cellspacing="0" bordercolor="#A9B8C2">
          <tr>
<td>
               <h:inputHidden value="#{Screen1.initializeService}"/>
          <h:selectOneListbox styleClass="style2" id="cmbMiddleArea" immediate="true" value="#{Screen1.selectedMiddleArea}">
          <f:selectItems value="#{Screen1.middleAreaList}" />
     </h:selectOneListbox>
     In my backing bean i have ..
     public String getInitializeService() {
          ..... Retrieve all the data from DB to initialize all the components on the JSP page
          .......setMiddleAreaList......
          .......setSelectedMiddleArea.....
          ........set the values of the individal component...
     I am retrieving all the data from DB in this getter method and intializing the components on the JSP page.
     I have also checked the code generated for JSP by both the servers.I am posting the code here for reference although
     i did not find any significant difference between the two...
     For Server 8.0
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
     return false;
     For Server 8.1
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     PageContext pageContext = jspxpage_context;
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
     return false;
     Now the actual problem is "getInitializeService" method never gets called when i deploy and run the application on Sun App Server8.1
     However with Sun App Server 8.0 it woeks perfectly fine.
     Can anybody help me in resolving these issues ?


Actually generated JSP code can be referred as ...
For Server 8.0
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
     return false;
     For Server 8.1
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     PageContext pageContext = jspxpage_context;
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
     return false;
     }

Problem with sun app server startup

hi,
i am getting problem with sun app server default start.the error is::
[#|2006-03-01T13:54:35.121+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
now i am useing Win Xp operating system,
show me a solution.
Regs..
Narasimha

You haven;t specified the exceptions you r getting ........while starting your default server.
if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........

Including static html file (WebServer) with JSP (App server)?

Similar Messages

Maybe you are looking for