Inclusion of 0recordmode in transfer rules

Dear All,
I am pulling data from a Ztable through a data source (Delta) into BW from R/3.I am pulling delta data into ODS through infosource. I have made an ODS but while making update rules , it gives warning "0recordmode is not present in infosource". I have to add 0recordmode in my transfer rules but what should I add in my R/3 data source. Should I add anything(field) in the Ztable in R/3?What should i map 0recordmode in transfer rules to?
Yours truly,
Murali.

hi,
refer to the thread below.
Re: u0093InfoObject 0recordmode is missing from the InfoSourceu0094

Similar Messages

BW3.5: Error message when trying to activate the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Transfer Structure / Transfer Rules comparison or copy

Hello,
We have our BW dev system linked to both dev and QA R/3. Consequently, the transfer rules are created manually for the QA.
Do you know if there are any tools to compare the transfer structure/rules for given data source and source systems?
Regards,
Michal

Hi Michal,
What I understood is, you have only one Bw system & both R/3 Dev and R/3 Quality boxes are connected to it and you have to take data from both boxes to BW system.
I do not understand the cause of this kind of system landscape but you can assign the another data source to same infosource then you will see data comming from two system one will be for R3 Dev and other for R3 Quality.
Hope this will help you
Suneel

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to delete blank space from value of Infoobject in the transfer rule

does anyboady know how to write a routine in the transfer rule in order to delete ending blank spaces from value of Infoobject 'ORDTEXT'. E.g. value: 'ABM '? After routine, the result should be 'ABM'.
Thanks for any input.

Deleting 'ending blank spaces' from a character type field (ie info-object or text) in SAP is not meaningful. For all usage, a char type field of length 8 having value 'ABM ' is same as 'ABM'.
Ok, HTML is changing the display in the above, so let me restate it
For all usage, a char type field of length 8 having value 'ABM_____' is same as 'ABM', take the underscore character (_) in the first string as a placeholder for space character.
Edited by: Ajay Das on Jul 29, 2009 12:07 PM

Error while activating transfer rules needs help.

The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar

While activating Transfer rules....

Hello BW gurus,
I am extracting CO Transaction Data from SAP R/3 into BW. I replicated 0CO_OM_CCA_1 standard Data Source into BW and assigned BI Content 0CO_OM_CCA_1 Info Source .
1) In the Transfer rules , all the fields from Data Source got mapped to the fields in Communication structure , other than those fields I find some fields(extra) in communication structure which are empty, I mean those fields did not get mapped .
1) what is the reason behind it , what is the main concept ?
2) how do I map these extra fields in communication structure ,and activate Transfer rules?
Points will be alloted ,
Thank you .

Hi Prarthana,
It is not mandatory that all the fields in Communication structure get mapped to the fields retrieved from source system. You can have extra fields in the communication structure means you can map some more fields from source using another data source by assigning same Infosource.
Without mapping them, you can activate Transfer rules and load data.
You can map them and load data into other fields using another datasource.
Hope this helps u...
Regards,
KK.

Error in creating transfer rules beween infosource and datasource in BI 7.0

Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.

Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi

Conversion exit error while activating the transfer rules

Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.

Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM

Error while migrating transfer rules

Hi all,
When migrating 2LIS_02_SCL transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199 after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
Regards
KK

Hello,
unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
Please adjust the rules to the ABAP OO compliance.
This how to paper should help:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
I hope this helps.
Michael

Error while activating transfer rules

Transfer method 'TRFC with PSA' is not supported by the source system
Message no. RSAR508
Diagnosis
The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
Procedure
Define the PSA in the source system.

Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
If you still face this error even after changing Transfer method, check below thread.
Transfer method 'TRFC with PSA' is not supported by the source system
Edited by: koundinya karanam on May 22, 2008 12:47 PM

Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Error while creating transfer rules.

Hi
I am creating transfer rules and a error message says " IS_00_BB does not exist". (IS_00) is the desc. of the info source)
can someone help me on this????
I had created transfer rules for another cube in the same info area, but no error had come then..
Thanks.
Aswath.

Hello,
The problem you are reporting could be that you are using the Transfer
Method 'IDOC' for the affected transfer rule(s). You should use the
'PSA' transfer method (rather than the 'IDOC' method), as the IDOC
method is very old.
If so, please change the transfer method in the affected transfer rules
to 'PSA', then try to activate the transfer structure again. This should
solve the problem, in which case, please let us know by clicking on the
'Close' button.
If the problem persists please create the report that is relevant for your system release
as per the SAP note 493422 and execute the report in your system, the report can be
created in se38, please talk to your basis team if you have problems creating the report.
Best Regards,
Des

Inclusion of 0recordmode in transfer rules

Similar Messages

Maybe you are looking for