Inclusion of line items before previous document due date passed

Hi All,
I am having below mentioned scenario:
1. I am invoicing a consumer in Aug-14 with periodic billing order. Document is having due date of 10-Sep.
2. Further I am doing interim billing and invoicing (before previous document due date expired) with posting date say 05-Sep.
The recent document of 05-Sep is not including all line items of document invoiced in Aug-14.
How do we include Aug-14 bill line items in next invoicing.
Saurabh

Hi,
If you are not using Integrated Account Maintenance, under "Item Selection for Bill printout (Subitems)" it should be as easy as leaving Open Items Selection restriction blank - meaning "All open items for contract acct (w. and w/o ref. to cntrct)", setting the "Interval days for the due date of items to be printed" to 999, and choosing the "Consider Items in Bill Sum Total" setting - once or always, I believe. If it doesn't work, I'd be looking at FQEVENT R410 FMs to see if the Items are passed that far.
<rant on>I can't to this day get how come so many Utilities (in my experience - all I've worked with) practice this "double" or even multiple billing of the same amounts (even if the amounts do not multiply in FI-CA postings, you have invoiced the amounts to customer multiple times). Or rather - nobody has been able to tell a valid and irrefutable reason, why things need to be done that way - it's usually "that's how we have always done it" reason. The accounting people don't even care that the previous invoice remains valid in the system (as long as their precious FI-CA postings do not multiply), because there is nothing in IS-U that automatically reverses or invalidates it... And I don't get why the regulators even permit it...<rant off>
cheers
Jānis

Similar Messages

  • Line items in a document entry

    Hi,
    there is restriction on line items for per document entry - i.e. 999.
    i would like to know if there is any update on the restriction in the enhancement packs.. or is it still 999.
    thank you
    - Vedavatee

    Check WIKI http://wiki.sdn.sap.com/wiki/display/ERPFI/Systemlimitationof999lineitemsperFIdocument
    Which Says
    Purpose
    The purpose of this WIKI is to explain a system limitation which does not allow you to have more than 999 line items per FI document, and also provide you with workarounds you can use to post your document.
    Overview
    When you are posting an FI document which has more than 999 line items, the system will issue an error message. This is due to the fact that the line item number field (BUZEI) in the BSEG table consists of 3 characters only and therefore the system cannot read more than 999 line items in the FI document.  There are some workarounds which can be done so that your document will be successfully posted in the system.
    System Limitation
    The FI document has more than 999 lines, the system issues error F5 807 ("Number of items in document is too large") or F5 727 ("Maximum number of items in FI reached"), and posting is not possible.
    There are no immediate plans to expand the number of line items beyond the current limit (999 lines per document). This is because the line item number (BSEG-BUZEI) field length is defined as 3 numeric positions (leading to a maximum possible number of 999 line items). The SAP development group is aware of this functionality change request, but the change is significant since BSEG is a cluster table which is used in numerous R/3 programs.
    Srinivas

  • Activate "Open Item Management" for account, line items posted previously

    Hi SAP Gurus,
    I am having a problem when do a clearing for GL account due to "open item management" check box in Txn FS00 is not activated and only "Line Item Display" is activated. For your info,  there are line items already posted and now we want this GL as an "Open Item Management". We are using ECC 6.0.
    I did referred to a previous posting in this Forums Activate "Open Item Management" for an Asset, line items posted previously but i received these errors when following the solution. The errors are like below:
    *Account 0039091200 is a reconciliation account in company code 5000
    *Company code 5000 is not considered for the activation
    What does it means by these errors? How do i rectify this error?
    Thanking you in advance.
    Regards,
    Nazrul

    Hi,
    1. Executing report RFSEPA02 has a risk and also doubtful since it is not applicable in ECC 6.0 (New GL).
    2. Create a New G/L with Open item management and transfer the balance to the newly created G/L.
    Refer the earlier threads / replies else last option contact SAP (OSS).
    Regards,
    Shridhar

  • Is it possible to have more than one Tax code per line item in Billing docu

    Is it possible to have more than one Tax code per line item in Billing document ?

    Hi,
    I have a different perspective there.
    If an item is applicable for two different taxes which are represented by two different tax condition types and these tax conditions are configured in the tax procedure, FTXP and so on....then these two condition records can have two different tax codes.
    We actually have this scenario in EU now, where EU talks about service tax in 2010 apart from the normal VAT. So now we have MWST and ZWST(Say)
    Now there are some materials which come with a service associated with it. So a service charge is also levied when the material is sold. So the material price will become applicable for VAT and the service charge becomes applicable for service tax. In this case, the tax classification of the customer will have two entries in sales orders updated in the fields VBAK-TAXK1 and VBAK-TAXK2 based on the sequence number of these condition types.
    Now based on different tax classification of the customer, we have 2 different tax codes representing different %of tax.
    Hope it helps

  • How to read product characteristics of a line item in Billing document?

    Hi Friends,
        I need to read the product characteristics of a line item in Billing document. Can you please help me with which tables or function modules I should use?
    Thanks in advance.
    Regards
    Jaker.

    Hi,
    Use the following BAPI's:
    BAPI_OBJCL_GETDETAIL
    or use the fun module:
    CLAF_CLASSIFICATION_OF_OBJECTS.
    Regards
    ANJI

  • Multiple line item in billing but only one line item in accounting document

    Hi Everyone,
    I am having one scenario in which sales order has more than one line item. Only one billing document is create for all line items in Sales Order but billing document contains as many items as sales order has. In accounting document of billing i find only one customer line which has total amount of all line items in billing as debited. My requirement is Accounting document also should have as many line of customer-debit as in billing items i.e sales order. For example :
    (1) Sales order has 2 line items.
    (2) Billing document is only ONE and has 2 line items
    (3) currently accounting document has only ONE line of Customet - Debit ( Total amount of both items)
    My requirement is
    Accounting document should have 2 line item of customer - Debit
    Customer - Debit (amount of first line item)
    Customer - Debit (amount of Second line item)
    Sales - Credit
    How can it be done ?
    Regards,
    Manish

    Hi,
    This is the SAP expected behaviour
    As far as the values correspond to same account key and same GL account as per account determination, then ti will be posted as a single line item in FI document.
    If you want the customer specific items to be posted in two GL accounts , then you have to do the account determination that way.
    For example, you should have a condition table in FICO as follows.
    Sales org/ Account key / Customer
    For this condition table, the entries shoudl be as follows.
    5110/ERS/Customer A  GL ACCOUNT IS 5000100
    5110/ERS/Customer B GL ACCOUNT IS  5000200
    In this case, there will be 2 entries for the invoice instead of just one line entry.

  • Manual account clear but can see line item after post document

    Hi Guru!
         I have post account clear with transaction code F-03  with open item zero balance such as
    account 214001 balance +500
    account 214001 balance -500
    when I simulate entry the system not show line item for post document but can post it . I want to know why ?
    thank you very much .

    Dear,
    This is standard behaviour...if line item which you are clearing have zero balance then system will not show any line items since open itemss are cleared....
    when you have tolerance difference or the residual posting then only system will show the line item....
    Regards,
    Chintan Joshi

  • Maximun line items per CO document

    Hello,
    Which is the maximum number of line items per CO document?
    Thanks,

    I am really not sure about MM.
    But in FI and CO, maximum is 999.
    There are also some enhancement available for this functionality to increase the number of documents.
    If you browse through internet, you will find some source code (sample) for this.
    Regards,
    Ravi

  • Line items in AB document during clearing?

    Hello!
    When I'm clearing below line items
    PK G/L        DocumentNo Itm Type     Sp. GL Amount in doc. curr.
    29 433110     1500006162   1 KT       D               7.054,04
    29 433110     1500006163   1 KT       D             134.710,80
    31 433110     1900012587   1 KR                       7.054,04-
    31 433110     1900012570   1 KR                     134.710,80-
    as a result I get document
    27 433110     100043516    1 AB                     141.764,84 
    39 433110     100043516    2 AB       D             141.764,84-
    Is it possible to get clearing document without line items, like here:
    433010     1500021212   1 KZ                   18.360,12     100050060
    433010     1500021213   1 KZ                    7.080,00      100050060
    433010     1500021219   1 KZ                    1.300,58      100050060
    433010     1500021223   1 KZ                      416,00       100050060
    433010     1900018975   1 KR                   18.360,12-    100050060
    433010     1900018976   1 KR                      416,00-      100050060
    433010     1900018978   1 KR                    1.300,58-     100050060
    433010     1900018979   1 KR                    7.080,00-     100050060
    where clearing document 100050060 doesn't contain any line items.
    In the first example, why system, during clearing, produce line items in AB document when alll happens on the same GL account?

    Hi,
    Clearing :
    1) Manual Clearing :
    Manually you have to select the line items and clear invoice with the bank line item - in this case payment document is the clearing document
    or
    Manually select the two open line items (both dr & cr), clear the line item. -  In this case there won't be any line item but you will have a seperate clearing document. Here either dr. line item / cr. line item are not the clearing document.
    2) Automatic Clearing :
    Using the F110 - in this case payment document is the clearing document
    or
    Using F.13 - selects one dr.line item & one cr. line item with as per the clearing criteria and clears the document using the clearing document, which doesn't have any line item
    VVR

  • Table for line items of budget document posted through FMBB transaction.

    HI,
    I am looking for Table of line items of budget document posted through FMBB transaction.
    There is table FMBL but it is breaking the amount into 12 parts.
    Thanks.

    Hi
    check the tables
    FMBDA   
    FMBDP   
    FMBDT   
    FMBH
    BPDK
    Regards
    Anji

  • Can we modify sales order line item before its booked through API?

    can we modify sales order line item before its booked through process_order API?
    here we have a situation where related item should be substituted for actual order item when user selects the related item , So looking for a way to modify the ordered item on sales order line .
    Thanks,

    Hi
    There is an API to update the Related Item on the line level in the Sales Order.
    PROCESS_ORDER API can be used for this purpose. It is part of OE_ORDER_PUB.
    Below are the fields on line table type that will be assigned to create an order line with related item and original ordered item.
    ORIGINAL_ORDERED_ITEM : Original Item
    ORDERED_ITEM : Related Item
    ITEM_RELATIONSHIP_TYPE : Type of Relationship.
    Please go ahead and try to create it like this. I am pretty sure that it will get the order created with related items.
    Note: Please make sure the profile option
    OM: Enable Related Items
    should be enabled.
    Please mark the response as helpful or correct if it provides you the solution.
    Thanks
    Mirza Tanzeel

  • Table for line items for parked documents

    Hello all,
    Do anyone know what is the table for line items for parked documents(fbv3)?
    Because I check bseg and these doc. aren't there.
    Thanks a lot!

    Hi,
    Please Check table "VBSEGS" you will get parked document ine items .please check below link it will clear...
    Find tables for GLs on Parking Documents by FB60
    Thanks in advance
    Chakri

  • Total line items in billing document

    Dear Fnds,
    I want to Find total line items in Billing document VBRk-posnr
    Thanks in advance
    Regards
    raj.

    Hi,
    You can get the line items details in internal table then write the following command:
    DESCRIBE TABLE itab LINES lv_lines.
    In Lv_lines you will get the count for that Sales Order Number (VBELN).
    Hope this may be useful..
    Regards,
    Prashant

  • FI line items up to the current date

    Hi all,
    I read the SAP note 485958 "BCT-FI:Extracting FI line items up to the current date" and I have some doubts here:
    1. After I've set parameter BWFIOVERLA to 'X' and extract delta at 6PM, will FI data that is changed before 6PM for example a gl entry at 5PM, goes into my delta extraction?
    2. What does BWFITIMBOR mean by having default value 02:00:00?
    3. Is this note applicable if my R3 PI release is at 2003_1_46C?
    Please advise.
    Thank you.
    Celeste

    Hi Celeste,
       Pls go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm
    Excerpts from this link regarding your doubt:
    BWFIOVERLA: The logic of this parameter prevents records with the previous day as their CPU date from still being in the update at the time of extraction.
    If X is set for this parameter, selection is made up to the previous day if the time limit is not reached.
    If <space> is set for this parameter, selection is made up to the day before the previous day if the time limit is not reached.
    BWFITIMBOR: This parameter designates 02.00 (2 A.M.) as the time limit for extraction. If this limit is not reached, the system uses a security interval of one day to determine the To-value of the selection. If extraction is started before 02:00 therefore, the selection takes place only up to the day before the extraction run.
    Hope it helps you!!!!
    Regards,
    Amit

  • Can i reorganise items within Reminders by due date?

    can i reorganise items within Reminders by due date? Currently it lists them in order of when I created them, but I'd rather order them by due date

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

Maybe you are looking for

  • Data back up

    I locked my iphone and want desperately to save/back up my data that is on the phone before resetting to factory settings. Please help any suggestions. To make matters worst. The computer that the phone is sync to is broken and the phone hasn't been

  • Converting from PDF to Word doc: Text in Fields disappears. What to do?

    Hi, I have a PDF template I filled out, for the cover of my thesis, which included 3 fields.  I am using the trial version of Adobe Acrobat XI Pro, and saved the filled in template as a new PDF. So far, so good.  However, I need to covert the PDF int

  • How to load flat file in BPS through Web-debugging

    Hi, We are working on flat file upload in BPS thru guide 'How to load flat file in BPS through Web'. Can some one guide on how to debug the function modules used while uploading the data. We have set up the break point in the function modules and als

  • Fonts are messed up using 1152x720 resolution

    I prefer to use the 1152 x 720 display resolution and recently the fonts have become ragged and thin. I have to go to the preferences pane and change the resolution to another setting and then back to the 1152 x720 to get them back to normal. Never h

  • Ipod is disable how can i fix it?

    My ipod is disaple how can i reset it?