Income tax is not generating on Bonus for second time through off cycle

Dear All,
I have an issue related to bonus. We have given bonus off cycle in the month of August 16th income tax was deducted on bonus amout. Now again mgt is giving bonus through offcycle in the month of November 10th but the problem is Income tax is not getting calculated in this month for bonus. We have checked the calculations every thing is fine.
We have created 1 wage type for 1st time bonus as Special Bonus and 2nd time we have created another wage type as Diwali bonus. We have done configuration same as 1st wage type special bonus for Diwali bonus wage type.
Let me know where it went wrong.
Rgds,
Prasad

Hi Narendra,
Thanx for the response, i tried the above but not generating WT/460. can you explain the logic.,
Changed BON5 to BON3
created new Tax code ZTDR from STDR
Assigned Bonus WT ( in 0267) to ZTDR in Table T7INT9
didn't understand why /401 or MTDR or 9TDR
Thanks
Sanm

Similar Messages

Income tax is not calculated After Total Income

Dear All,
                    I am running my payroll but my Income tax is not calculating properly because when am seeing my log then i find my total income is calculated properly but after that my STANDARD DEDUCTION is not been happening according to the rule if the employe is men it should be deducted 150,000 but it's not happenings . In payroll log where i can see the this (STANDARD DEDUCTION)amount because am not able to find how much deduction is happenings.My employe joining date is 01.05.2009
I am giving my salary components.
Basic-19500
HRA-13650
Performance-15000
LIC(IT0586 80C)-35215
Tution Fee(IT0586 80 C)-16800
Calculated PF-2340
CAlcualtion is done on the basis of 11 month
Gross Salary                   529,650.00
Exemption U/S 10               107,250.00 (HRA Annual Ex)
Balance                        422,400.00
Incm under Hd Salary           422,400.00
Gross Tot Income               422,400.00
Agg of Chapter VI               77,755.00
Total Income                   344,650.00 (Till Here Every thng is fine From the next level am not able to identify how much and which basis MY Standard deduction is calculated)
Tax on total Income             52,395.00
Tax payable and surcharg        53,967.00
Income Tax                       4,906.00
Kindly help me to resolve this issue am not a functional guy.
Thanks
Sandeep

Dear Siknder ,
                           I alredy check in it0002 it male.
I want to know how should i check in my payroll log what calculation is happening after my total income get.
And also how i can identify which finacial year calculation is been performed.

F110 payment run completed but not generated all check for the payments

Do any one have an idea or the potential answer on my query
I've run F110 and generated one Payment all 45 open items for one vendor
Now after the print done only the first 20 items got into the check register, and left over the remaining 25 items
So my question is why system not generated the check for the remaining 25 items and what is the remedy

No all settings are available, but still the same situation the all checks are not generated for all items of the vendor open items clearing in the one payment documents
single vendor
single payment for all 25 open items
After print activity compelted
checks created for items 5
leftover items 20 not created check
can anyone tell why system is behaving like this

Fi Document is not generating in MIGO for multiple account assignment in PO

Hi,
I have have created asset po DG set 111 quanity is 4, i have created 4 different assets and assign quanity 1 to each dg sets in account assignment. While doing GRN system is not generating FI document for this po. if i am giving one quanity or single account assignment for as 4 then it is generating FI quantity.
PLease help me out why system is not generating FI document for multiple accont assignment in MIGO.
Thanks in advance
KISHORE

Hi
There is no option if you are not on EhP4... Do MIRO and see if the FI doc is generated
Only way is to do MIRO immediately after MIGO.. OR Schedule ERS (Evaluated Receipt Settlement) which runs every hour in the background so that MIRO is posted automatically based on MIGO document.... Basically, you have to do MIRO after MIGO.. Whether you do it manually or through ERS is a matter of choice
Regards
Ajay M

Call Function not Generating Function Module for Smartform

Hi Gurus,
We have a work copy print program use to print deliveries (smartforms). This program works fine in Production but right now we are doing some testing and I found out that when we run this program in QUALITY environtment, it shortdumps with error saying "Function Module Not Found"
Basically when it gets to the Function Module "SSF_FUNCTION_MODULE_NAME", it could not generate any function module for the form it Sy-Subrc = 2 Exception meaning NO_FUNCTION_MODULE.
The problem is this only happens in our QUALITY environment.I compare the function module in the 2 systems, there was not diff as this is a Standard SAP module. I passed diff smartforms we have in QUALITY through the FM and it will not generating any FM for any of them. So this is not an error from the smartforms, bcos all the same smartforms generates FM in Prod.
So what I did next is to Debug the FM "SSF_FUNCTION_MODULE_NAME" in the 2 systems to see where the diff is coming from. I noticed 2 views that the FM is using, they are STXFADM and D010SINF . So on the Production system, STXFADM-LASTDATE and D010SINF-UDAT fields are the same value, so it generates the FM. On the QUALITY systems, the values are different hence it skips the code to generate the FM.
Thanks Guys.
Points will greatly be awarded for this.

Please guys, help me look into this, I really need a solution fast.
Thanks

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

How to Force JHS do not generate navigation cases for Groups?

Hello
I have already seen "Overwrite faces-config and navigation rules " property for Group in JhsApp deff .But It does not work .How Force JHS do not generate navigation cases for Groups? and another question is that how can I customize navigation case generation in JheadStart?
Thanks

Hi,
You are right: the navigation rules in the main faces-config file are overwritten, even if you uncheck these flags. Here is the solution:
If you want to preserve some of the navigation rules in the main faces config: alter the velocity template for faces-config. You can only switch off the entire generation of faces-config.xml; not individual parts.
If you want to add a special navigation rule: add it to the group faces config file.
If you want to preserve post-generation changes to the group faces config file: uncheck 'generate controller group?' or put it in the templates for that group.
Note: the flag 'Overwrite Faces-Config beans and Navigation Rules?' has become obsolete, you should only use 'Generate Controller Group?'.
Regards,
Evert-Jan de Bruin
JHeadstart Team

Could not generate stub objects for web service invocation in ColdFusion

I was able to call the services on the development box - windows server without any problem at all, everything was working fine but the moment i uploaded to a linux box production server I get this error. "Could not generate stub objects for web service invocation in ColdFusion"
What could be the cause of this problem, i have googled a lot but no solution yet any ideas.

Let me make it simple:
1. Server A is our development server.- hosted inhouse with coldfusion installed.
2. Server B is our production server - a linux server with coldfusion installed hosted on the internet
3. Server C is a third party server containing the webservice - this is a windows server with .net
coldfusion is installed on Server A, the code works here and can connect to server C without any problem. It gets the required respone
but when the code was uploaded to server c it gives the error when we run it.
now i tried just a simple code which works fine on server A below:
<cfinvoke webservice="http://www.webservicex.net/CurrencyConvertor.asmx?WSDL" method="ConversionRate" returnvariable="ConversionRateResult">
    <cfinvokeargument name="FromCurrency" value="EUR" />
    <cfinvokeargument name="ToCurrency" value="USD" />
</cfinvoke>
<cfdump var="#ConversionRateResult#" />
But when i uploaded it to server C: it returns the error
Cannot generate stub objects for web service invocation.
Name: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. WSDL: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory) It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors.
The error occurred in /home/works/public_html/currency.cfm: line 7
5 :     <cfinvokeargument name="FromCurrency" value="EUR" />
6 :
7 :     <cfinvokeargument name="ToCurrency" value="USD" />
8 :
9 : </cfinvoke>
Now if you try the preceeding code on a windows environment it works fine but the moment you put in the in the linux environment it generates this error
I feel that the error may actually be :
java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory)
but i am clueless as to what to do next
Ok so I tried the wget command on the linux
this is what i got
-bash-3.2# wget http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
--2011-07-02 23:23:42-- http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
Resolving www.webservicesx.net... 216.8.179.25
Connecting to www.webservicesx.net|216.8.179.25|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-07-02 23:23:43 ERROR 403: Forbidden.

After upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

HT4970 I have chosen not to use iCloud for the time being, and cannot get the Reminders i input on my Mac to replicate to my iphone and iPad? any help is appreciated.

I have chosen not to use iCloud for the time being since the syncing was inconsistently working with the calender and contacts; and cannot get the Reminders on my Mac to sync/replicate onto my ios device, neither iphone nor ipad. Help is appreciated in respect to Reminders. Thank you.

ok, thanks. couple other questions...
1. will it sync to my reminders on my MAC too if i enter via icloud? if not, what's the reason for having the reminder list available on my Mac if it can't sync?
2. I have 2 different email accounts, one with a .mac address and another with .msn. both can be accessed via icloud. i ran a test using my msn acct as the signin and it logged the reminder onto both the iphone and ipad fine.
however, when i try with my mac address, it only shows up on my iphone, which list reminders under icloud(which worked on both devices and then under mac which worked only on the iphone, not ipad. any idea why that might be happening?
thanks for your help.

The FM "RV_PRICE_PRINT_HEAD" is not runnging for second time...

Hi All
The FM "RV_PRICE_PRINT_HEAD" is not runnging for second time, first time it works fine and second time it is giving the null values. Will you please solve this problem (is there any flag to recall the function ex: run the FM press f8 and come back f3 and press again f8 - first time it is showing the data & at second time f8 it is not showing any data ).
Feilds filled in head_i structure are:
VBTYP,
KALSM,
KNUMV,
WAERK,
KAPPL.
Thanks,
Ravi
Message was edited by:
Ravi Kumar
Message was edited by:
Ravi Kumar

Hi,
before <b>every</b> call of RV_PRICE_PRINT_HEAD or RV_PRICE_PRINT_ITEM you should call RV_PRICE_PRINT_REFRESH once - you have to pass a dummy parameter.
No idea why this is so but SAP does it the same way
Regards,
Clemens

Error while importing zip file for second time to B2B through ant script

[echo] args=import
importstatus:
[echo] Commandline arguments 1: [import]
[echo] Import with overwrite=true
[echo] B2BCommandLineUtility: importRepository: Error messages:
[echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
019445112136.xml from metadata repository
[echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
45112136.xml because it is not in the metadata repository
[echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
136.xml" and version 16 does not exist in the repository.
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo]
Can anybody plz help???
Thanks in Advance!!!

Hi,
Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
But again it works for the third time..
Error Message:
Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
Please help...

How can we process the CRM Order again for second time in debugging mode

Hi,
Can anybody please tell me how can we process the CRM ORDER for second time. that I want to process in debugging mode.
Thanks,
bsv

Hi bsv,
Are you trying to reprocess a BDOC for debugging purpose?
If the BDOC is not with a final status, you will be able to reprocess it using the reprocess button in the smw01 search result list.
And you may put /h on the popup when you click on the 'reprocess' button.
If it is allowed to make some changes in the CRM ORDER for testin purpose, it would be easier to perform debugging.
A more 'careless' way is to deactivate the outbound or inbound queue in transaction smqs or smqr, then in smq1 or smq2 to locate the interested queue, and click on button 'debug LUW'.
Hongyan

HT1918 Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD an

Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD and itunes will not let me? The music is in my music file but will not let me burn them ! really I tried over and over, now Im just frustrated !
Please find the original's purchased, my name and email have not changed. Thanks for your time and consideration.
Jeannie
7024503288
[email protected]

Fixed. /Users/x/Library/Application Support/SIMBL/Plugins/AirKeysInputManager.bundle got corrupted by a badly installed safari extension. Deleting this, then reinstalling adobe air did the trick. I wasn't thorough enough on my first try, it was tricky to find everything associated. I had to look for files in the console log then search for them. Spotlight was missing some deep files, EasyFind worked better for me.

Income tax amount not coming is payslip

Dear Experts,
In remuneration statement the income tax amount is not appearing in deduction window, but where amount is getting deducted from earning.
As a result the earning minus deduction is mismatch, i.e. net salary is not correct.
Ex:
i.e. Earning 30000
Deduction 2000
Net is appearing as 26500. Which is wrong
the wage type /460 is been maintained in pay slip,
Value for /460 and /470 is not getting updated in RT table.
Where as value for /458 and /401 is appearing in RT table.
can any one share me your ideas where exactly the error might be or what changes to be done.
Since it is month its an important one.
Thanks and Regards

there must be some other salay component which is getting added up in the gross.
also, check the processing in RT for the cumulative wage types.
Regards,
Shruti

Income tax is not generating on Bonus for second time through off cycle

Similar Messages

Maybe you are looking for