Incoming called URI number manipulation in Call manager 10.5

Dear Experts,
can we manipulate the called URI number like we manipulate the digits (e.g Translation pattern) ?
can we have manipulate the incoming called number to match a route pattern
for eg. the called uri is 955XXXX@CUCM-address
route pattern 955XXXX ==> Voice Gateway
thanks for your help in advance
Anas

because it should match a route pattern not Directory ? it always return 404 not found
it comes as a URI because it is use SIP trunk to reach the CUCM 

Similar Messages

  • Expired number & Incoming calls log

    Hi,
    I wanted to know when exactly my old Skype number was expired and how can i get an incoming calls log for that number?
    Regards,

    found this solution in another thread...seems to have solved the issue.
    Here is the summary of the steps I took to correct the issue:
    1) Open the Phone and dial *228. This is a Verizon over-the-air programming number.
    2) When the system answer press 1 for "Program or activate your phone"
    3) Wait for the call to disconnect. You should get a prompt stating something like, "Settings updated."
    4) Open the Task Manager and kill the Phone, Message, and Contacts Applications
    5) Wait a few minutes (I waited 3 just to be extra safe)
    6) Open the Message App to verify the fix.
    If you are still broken, kill the Message App again, then reboot your phone.

  • IPhone 5 outgoing and incoming SMS works but incoming calls do not work. The dialler gets message this number is not in available in network.

    New I phone outgoing calls as well incoming SMS works but can not receive incoming calls. Caller gets the number does not exist in network.

         Like Superman, here I am to save the day! I can help you with your service in your home area dizzymslizzie. Let's start with what zip code are you in? Can I assume that there isn't any physical or liquid damage on the iPhone 5? Recently, there has been an update to the iPhone to iOS 7. If you have done this update then please provide the exact carrier version that's installed. Keep in mind that there is a difference in device performance between iOS 7 and the iOS 7 beta version. As you share this info, I will check the area to re-affirm that the issue is or is not network related.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • How do I change my incoming calls to view caller's phone number instead of name?  This is for numbers not stored in my contacts (i.e. Unknown)

    How do I change my incoming call view to see the "phone number" instead of seeing "Unknown" for contacts who are not stored in my phone?  Whenever a call comes in it says unknow instead on the phone number that is calling.

    You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
    That way you can quickly log in to your own account - then back to his.
    You should obviously have different passwords.

  • My skype to go number does not take incoming calls

    No matter what phone you call from (U.S. landline, various cell carriers, U.K.) you get a message "You have reached a non-working number.  Announcement: 14 Switch 1, 8 dash 3."
    I have plenty of credit in my account, and can make outgoing calls. But neither my computer when signed in or my stand alone skype phone (IPEVO) when signed in take incoming calls.  Do I blame Microsoft?
    Either way, it would be nice if someone could help me trouble shoot so we could receive calls again. 

    Hello,
    A SkypeToGo # is the # you call to set up STG calls to your contacts. It's not designed to receive inbound calls which is why you are receiving that message.
    To receive inbound calls you require a Skype OnLine #.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Toll fraud traffic pumping on a Call manager express and unity express with an 800 toll free number.

    I have a customer with a call manager express and a unity express. They have an 800 toll free number that rings in to an auto attendant on the CUE. The problem is something called toll fraud traffic pumping. The caller, always from a different number, reaches the auto attendant by dialing the 800 number. They then somehow manage to keep the line connected for up to 12 hours by somehow staying in the auto attendant. I opened a TAC case and was informed that it is not in Cisco's hands to create a way to disconnect a call that is connected to the CUE. I need a way to have a call that stays in the auto attendant or voicemail after 3 to 5 minutes. I can't see a way to do it in the auto attendant script. Can someone help with a method that will disconnect the caller if they stay in the CUE for a period of time?

    Thank you for the response Jaime.
    That is what TAC told me. I am not familiar with TCL scripting and I have been looking at some guides on it. Any advice on a source to go to for assistance with that, possibly someone to help?

  • How to get incoming call number in j2me

    hi all,
    Is there any way to get incoming call number in j2me???
    thanks in advance
    mraj

    You can't get this number at least till MIDP 2.0 devices.. you only have a interrupt events which call showNodify and hideNotify, pauseApp or start methods. Once can neither know if this interrupt is due to phone call, user switching to menu or sms etc..
    Regards,
    Raja Nagendra Kumar

  • How do you adjust the number of rings before the incoming call goes into voicemail?

    How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

    Set by your carrier, so contact them.

  • Add prefix 9 for incoming calling number of missed call only.

    Dear,
    I am wondering how to add the prefix 9 to incoming calling number of missed calls only, not the calling alerting number on the phone screen. For example, the local user 472 2001 calls our DID 482 3001 along with the calling number 472 2001 on the dialed phone screen, if I missed this call, in the directory missed call I can see 94722001.
    I know I can add the prefix in the field incoming called party subscriber prefix on the gateway page, but when I do this, all of the calling number information show 9.
    Thanks,
    Kirin

    If I understand you correctly, you would like to only change the missed calls/placed calls on your phones without changing the digits?
    If you have an PRI, you can use this translation rule to change calling ID only on inbound calls:
    Translation pattern to modify Caller ID to add a 9
    voice translation-rule 1
    Rule #  /match/ /set/
    (^.= Match anything begining with any number)(*= one or more digits) tranlasate to (9& = Take whatever is in the match phase and plug it in here)
    rule 1 /^.*/ /9&/ type subscriber subscriber (subscriber = ton(Ton=Type of number) value local area)
    rule 2 /^.*/ /91&/ type national national (national = ton value long distance area)
    rule 3 /^.*/ /9011&/ type international international (international = ton value international area)
    Config t
    voice translation-rule 1
    rule 1 /^.*/ /9&/ type subscriber subscriber
    rule 2 /^.*/ /91&/ type national national
    rule 3 /^.*/ /9011&/ type international international
    voice translation-profile INBOUND_PSTN
    translate calling 1
    voice-port X/X/X
    translation-profile incoming INBOUND_PSTN
    Let me know if this helps.
    John

  • Setting number of rings for incoming call

    how does one control the number of rings regarding incoming calls before it goes to voice mail.

    You can do it manually - it's a bit of a fiddle but it works. You need to specify the length of time in *seconds* that you want your phone to ring, before voicemail kicks in. This article describes how to do it step by step - I've followed it and it works perfectly
    http://www.iphonefaq.org/archives/971382
    Hope that this helps

  • Using answer-address in dial-peer when it has incoming called number

    Hello,
    We would like to use an inbound dial peer that will match by the Calling Number using answer-address.
    In our current configuration we already have inbound dial peers with "incoming called number" for Fax2Mail services.
    We want to use the calling number for matching to a different dial peer, without the "fax detect" service.
    As we notice, as soon as he matching the incoming called number, even if have identical dial peer with the same incoming called number, he stop the matching processes and the gateway ignore the answer-address.
    Is there any way to match the dial peer by Calling Number even if he have the incoming called number field?
    Thanks

    Hello,
    in the Inbound Dial-peer matching process, the 'incoming called-number' has the highest priority over asnwer- address & destination pattern. So if you want to match a particular inbound dial-peer based on calling number, add only asnwer-address and don't configure incoming-called number on the same dial-peer.
    FYI: Understanding the dial-peer matching process
    http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/14074-in-dial-peer-match.html?referring_site=smartnavRD#topic3
    //Suresh
    Please rate all the useful posts.

  • Number of rings on incoming calls

    Is there a way to increase the number of rings on an incoming call on a Razr Maxx?  3 rings just doesn't cut it.

    No, it's set by the system at 30 seconds.  Using a different ringtone sometimes helps.

  • Increasing the number of rings on incoming calls

    How can I increase the number of rings on the 8800 for incoming calls?  Currently,I can set only 3 rings and that is often not enough time to get to the device.  Any help greatly appeciated.
    Solved!
    Go to Solution.

    What do you mean by you can se three ring? You can set 3 vibration for profiles settings. Number of time your deivce will ring is dependent on your carrier.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • HT201229 How can I access a list of incoming calls from a blocked number

    How can I access a call log of incoming calls from a blocked number on my iphone?

    Calls from blocked #'s won't go through, so they won't be listed on your device.

  • After upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?

    after upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?

    This started happening to me on my iPhone 4. Some text messages show only the numer they came from and those same numbers do not show the contact name in my calls list, even though the contacts are saved and synced via iCloud. I have tried to save different versions of the number in the same contact, but it won't work. If I call one of the recent numbers though, the conact comes up. I have tried reseting and restoring to no avail.

Maybe you are looking for