Incoming caller show unknown

Hi, after upgraded 4s from 6.1.3 to 7.0.4, all incoming calls become unknown even contact list available.
Please help.

Contact your cellular provider to verify that your Caller ID option is properly provisioned.

Similar Messages

  • All my incoming calls show unknown, even though most a from people in my contact list.  How do I correct this?

    Why do all my incoming calls show unknown, even when they are from people in my contact list?

    Hi Hedland,
    Thanks for visiting Apple Support Communities.
    You may want to first check your caller ID settings, as mentioned in this article:
    iPhone: Understanding phone features
    http://support.apple.com/kb/HT4515
    Caller ID
    iPhone (GSM networks)
    Turn on or off in Settings > Phone
    iPhone (CDMA networks)
    Contact your carrier for information on using Caller ID
    If your settings are correct, try the troubleshooting steps in our iPhone Assistant:
    http://www.apple.com/support/iphone/assistant/phone/
    All the best,
    Jeremy

  • HT201412 All my incoming calls show unknown caller

    Whenever I get a call from any number, the caller ID is always displayed as unknown caller. How do I sort this out?

    Contact your cellular provider to verify that your Caller ID option is properly provisioned.

  • My incoming calls appears unknown even if they are in my contact list!

    Hey!
    My 8520 blackberry keeps showing unknown number when I already have them in my contact list. So if somebody can help, I will be very grateful.
    Thank you,
    Ana

    Hello Anutzamaria
    Welcome to BlackBerry Support Forums
    Please refer to this Post incoming call appear as 'unknown number'
    Good luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • All Incoming calls are 'Unknown'

    About 6 days ago all my incoming calls are coming in as 'Unknown'. Also my phone calls to my friends/relatives were showing up as 'blocked' or 'private'.
    I was on the phone with at&t and they said all my settings were fine. They put me through to apple support and we did a reset of settings on my phone and that resolved my outgoing calls as showing up as 'Blocked/Private' but STILL all my incoming calls are showing up as 'Unknown'. VERY frustrating. What is weird though all my incoming text messages know the name of the contact...why would this not work for phonecalls. ANY suggestions at all on how to resolve? I really don't want to have to try and reset all my default settings again on my phone, but if another attempt at that is suggested I guess I'll try. Please advise.

    I have a similar problem although it's only with some numbers showing up as "Unknown". I went to the local Apple store and a busy Genius said it ws an AT&T problem. So I spent an hour on the phone with an real good AT&T tech. 866-700-2105 gets you right to iPhone tech support. He said it was a iPhone issue. So I made an appointment with a Genius. We put my SIM card in a new phone - same problem. I had a person call, whose number shows up as Unknown on my phone call the Genius'iPhone. Caller ID shows the number. So we think it's my SIM card. Off to the AT&T store for a new SIM card. With a new card - same old problem. The ball is back in AT&T's court. I bet you thought there would be a solution here. Sorry.

  • Incoming call shows Name - work/mobile/home of deleted contacts !!

    hi all,
    i have iphone with firmware 1.1.3
    I was trying to add a contact while on a call- a feature unavailable in 1.1.3
    while doing so, all my contacts were deleted and I did not sync with my computer.
    THough I do not have a contact in my contacts list, if one of my old contact calls me, his name is correctly displayed with work/home/mobile information.
    This means data is still there but not accessible nor visible? Has anyone encountered such an issue ?
    Trying to sync with computer does not show contacts that were "deleted"
    Any ideas to fix? Else i will upgrade phone firmware.
    Thanks
    Rajas

    I agree that I have old firmware and I should upgrade. Would the update restore my deleted contacts? I do not have unlocked phone or any Non-apple apps.
    I Added a contact with home and mobile#. I then deleted the home# and called my cell from the same deleted home#. The incoming call stil shows the correct information "Name - Home". This means the data is available somewhere in the phone but not visible.
    I tried to do a sync using iTunes 7.7.1 or latest. It only shows me Contacts that I added recently after all my contacts were erased. But when i get calls from those who were in my Contact list, I still see their names poping up when the call comes in and more over it identifies which phone they are calling from home/work/mobile/other. How is that ?
    Thanks
    Rajas

  • Incoming calls always "Unknown" ?

    I just recently switched to Droid Razr Maxx HD. Everything works fine but all incoming calls have neither name nor number. They always come in as "Unknown" even when they are in my contacts. Especially family & friends are NOT ID blocked on their end. I checked all the settings and everything seems to be set the way it should be. Can anyone help, please?

        Quite an interesting situation you have going on here, Montill. I'm commited to helping you find a solution. Thanks to B33 for your input. I reviewed the options on your device, but I was unable to locate any option to turn caller ID on or off. I was going to suggest that you ensure that your contracts' numbers are saved into the phone correctly. For example: If your calls come from a ten digit number (xxx-xxx-xxxx), but you have the contact saved as seven digit number (xxx-xxxx) the caller ID on your device may not recognize the number. 
    It's also possible that the caller ID feature is not on your account. Once you've confirmed how your numbers are saved into your device, let me know if you would like for me to review your  account. Follow me, send a PM (private message) and provide me with your wireless number. Have a great day.
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • Why is it that when someone calls my dad's phone, the incoming call shows up on both our screens?

    Whenever someone is calling my dad, we both get the call. It only happens when we are close. It only happens when the calls are for him. It happens even when the other person is not doing a multiple call. Does it have something to do with us having the same Wi-Fi? He has an iPhone 5 with iOS 8 and I have an iPhone 5c with iOS 8.

    It has to do with you and him sharing an Apple ID. This is not a good practice. Create a new Apple ID: http://appleid.apple.com.
    You could also go to Settings > FaceTime > iPhone Cellular Calls and turn if off, but ultimately you'll probably run into other problems down the road by sharing an ID.

  • Unknown "cisco" incoming calls

    Hi,
     anyone here who can assist me with this? we have a C40 endpoint whose configured using NAT. the issue is that we are getting an incoming calls from unknown "cisco" regardless if we are engaged in a call or not. when we checked the history, there is no logs saved.
    by the way, the unit is configured using NAT. but we tried to remove the NAT settings so the Endpoint is only transparent within the network. but still we are getting the same issue. unknown "cisco" still can call our end point.
    the endpoint is not registered to any GK or SIP server. anyone can assist me with this?
    thanks!

    This is a known issue, suggest you take a look at these:
    https://supportforums.cisco.com/discussion/12340591/nuisance-h323-calls-sx20
    https://supportforums.cisco.com/discussion/12336591/sourceh323idcisco-incomingcalls
    http://www.videonationsltd.co.uk/2014/11/h-323-cisco-spam-calls/
    In short, not much you can do, apart from either on your firewall, only allow incoming calls from trusted IP addresses, put the systems) behind a VCS etc or turn off auto-answer.
    /jens
    Please rate replies and mark question(s) as "answered" if applicable.

  • See caller's name in an incoming call - Nokia 1600

    Hi there,
    I have just bought a Nokia 1600. I have noticed that the incoming calls show only the number of the caller. I have the caller number and name in the phonebook. Is there anything I must configure in order to see the caller's name? I sure hope that this is a misconfiguration, otherwise i'll have to return the phone...I don't think I'll be memorizing people's numbers...
    best regards,
    Louie

    I had the same problem and worked out that it was because I had the same number stored more than once in the phone memory under different names. If you have this then the phone displays the number as it doesn't know which name to use. This occurs even if one entry is on the SIM card and the other in the phone memory. I think this is a quirk of Nokia phones generally and not limited to the 1600 as I know other people who have had the same problem.
    To get round it you have to delete any duplicates from the phone or sim card contact lists.
    Hope this helps,
    Rob.

  • Incoming call alert

    Is there a way to make incoming calls show as a banner instead of interrupting what I'm doing on the phone? Sometimes I don't want to answer or answer right away, and would rather not reject the call.

    Settings>Phone>Call Waiting...If you turn this to "off", the calls will go straight to voicemail.

  • Is there a way to send incoming 'Blocked' and 'Unknown' calls directly to VM without having the call ring or vibrate? (iPhone 5, iOS 7)

    I'm tired of getting calls from sales and /or winning a cruise.  How can I automatically send incoming calls that are either 'Blocked' or the number is 'Unknown' directly to Voice Mail.  I would like to skip the ring and the vibrate (I do have a silent ringer tong tone that I can use, but it only works if the ANI shows a number).  Thanks.

    You might find THIS useful.

  • Currently i am outside country and using my family person sim but my iphone display shows unknown call it become difficult when i missed call please help me out

    currently i am outside country and using my family person sim but my iphone incoming call display shows unknown call it become difficult when i missed call please help me out

    We are all users here
    what exactly do want any one to do ?

  • My iphone has lost it´s tunes and does only vibrate.By incoming calls it shows "blocked"

    By incoming calls my iphone dos only vibrate (no tune) and it shows "blocked".How can I get back the tunes?

    Greetings Nefertiti72,
    It seems you are experiencing an issue with contact syncing and management. It seems you've removed an email account which contained a number of contacts that are not associated with your iCloud account. I have linked to a knowledge base article which provides more information about iCloud contacts syncing:
    Get help using iCloud Contacts - Apple Support
    Learn what to do if you’re having issues using iCloud Contacts. For example, you might make changes to Contacts that don't update across all of your devices.
    You may want to consider importing the contacts from the email account you removed. You can do it easily by following the steps in this article:
    iCloud: Import a vCard
    You can import an electronic business card, also called a vCard, into iCloud Contacts. If the vCard contains contact information for more than one person, each contact becomes a separate entry.
    In iCloud Contacts, choose Import vCard from the Action pop-up menu , which appears at the bottom of the All Contacts list or a list of group contacts
    Select a vCard to import.
    The contacts from the vCard are added to the All Contacts group in Contacts. You can add the contacts to any other group by dragging them to the desired group.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • My Iphone 5 updated to IOS 6.2 and now my contact names do not show on incomming calls or text messages. All i can see is the number of the person calling. how can i fix this?? please help

    I updated my iphone software to IOS 6.2 yesterday and im not sure if it is a coincidence but now, my contact names do not show on incomming calls or messages. Also they do not show on past calls or recent history.
    All my contacts in my phonebook still exist and are correct, the problem only occurs when receiving calls or messages. please help i need this fixing
    Regards,
    Frosty

    Try to restore your iphone via iTunes or update to ios6.1.2.
    If itunes gives an error with restoring (DFU/Recovery or just normal)
    try this:
    open your computer and search on windows; C://windows/system32/drivers/etc/hosts
    open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
    #74.208.10.249 gs.apple.com
    this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
    let me know if succeeded!

Maybe you are looking for

  • Unable to capture from Sony HDFX1 camera

    Built a new PC and utilized a top end ATI Radeon dual video card. Running Vista Ultra OS(hmmmm), plenty ram, processor, etc. PC does not see my camera when I plug in for capture. Do I need a special codec or 1394 HD drivers available for HD capture f

  • Free of cost

    Hi, Can I download anything from OTN without cost?Thanks.

  • Organizer in Photoshop Elements 8 hangs

    I have PhotoShop Elements 8 (boxed DVD) installed on a HP Elite desktop with Intel i-core 7 processor with Windows 7 - 64 bit operating system. The PSE 8 organizer will not load and hangs up. The editior, however, loads. Unistalled and reinstalled th

  • How do i plot to my HP600 Plotter - Please Help

    I am very good at creating PDF files out of autocad. and so is all the people that send me files. everything i get is in PDF format. And now i need to print them onto paper. I have installed Adobe Pro 9 and have tried with Adobe Pro 6 (to no end) to

  • Keywords won't Apply to Multiple Images

    I just bought a new iMac and have transitioned to Mavericks and Aperture 3.5.1.  I just noticed that I can't seem to apply keywords to multiple images.  When I select a number of images (usind click then shift-click on the last, or command-click on s