Incoming calls are answered automatically

Hi all,
Please help with a following issue:
I have purchased a Curve 3G about a month ago.
Keep encountering the same problem: My phone calls are being auto answered without ringing (basically the phone connects the caller without any prompt from me). After taking a battery out and restarting, the blackberry works the way it is supposed to. After a while it switches to autoanswering calls. Can not be rebooting this silly phone all the time. I did check all the settings when it switches to autoanswering - Auto Answer Calls is on "Never" in General Options and I have changed all profiles to "Always play sound".
Is there a shortcut key I am pressing accidentally to connect automatically?
Or is it a software/hardware issue?

That is the way the iPhone is supposed to function. The slide is what is used to answer the call. There is no other setting you can use to function in the manner you describe.

Similar Messages

Incoming calls are going directly to Voicemail, Iphone 5S

I switched phones from an Iphone 4 to this Iphone 5S and my incoming calls are going directly to voice-mail and not ringing the phone. The only app I downloaded that is different from my Iphone 4 is the GroupMe app, but I don't know if that is necessarily the cause. Anyone have a suggestion? thanks

Hi,   I don't know if this info will help many, but for a few it may. I had this problem over the weekend. Called Tech Support 2x, they tried everything, resetting,, *73, *228, *900 , there were no "do not disturb" settings, etc.   They prepared a work ticket for the next level of help.
Meanwhile, I couldn't figure out what changed all of a sudden. I knew I had no calls coming in after accessing my voicemail. I looked at my recent calls and noticed i had dialed a *83 prior to the voicemail *86. Fat thumbs. I remember years ago, having the features of *83 for do not disturb and *84 to stop the feature.   Just for giggles, i dialed *84, tried from another phone calling my number and WHOOLA, it came thru.
If anyone has these issues, try the *73 first. But just for the heck of it, do *84 as well. Takes half a second.   If those dont' work, then call Tech Support. I wanted to share to help at least some of you as I understand the frustration of not having incoming calls. I even called Tech Support and shared the info. As this was not an option given to me from Tech Support, but then again, i don't believe *83 or *84 is offered anymore. I just dated myself, but hope it helps others !

Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.

Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.Even though i have been into my settings to check if on. can anyone help?

Have you checked your sound prefs after you updated the OS? It's possible they got changed during the update.

UC520 SIP trunk unable to make outgoing calls, incoming calls are ok

I have an new SIP trunk set on an UC520 and the incoming calls are ok, but the outgoing calls are getting an busy tone(not working).
The bellow trace is showing that the cause is "No route to destination (3) ". The question is this route has to do with the firewall(ip routing) or with the voice translation rules?
001866: //3439/91242E51926F/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x843CE50C
State of The Call        : STATE_DEAD
TCP Sockets Used         : YES
Calling Number           : 0777777777 <- main sip number
Called Number            : 0888888888 <- called number
Source IP Address (Sig ): 0.0.0.0
Destn SIP Req Addr:Port : 0.0.0.0:0
Destn SIP Resp Addr:Port : 0.0.0.0:0
Destination Name         :
001867: //3439/91242E51926F/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 3
Disconnect Cause (SIP)   : 200

Hi Emil,
I've added bind control and media interface but outgoing calls are the same blocked, strange thing is that the cause is still no route to destination (3)
but
UC_520#show sip-ua status
SIP User Agent Status
SIP User Agent for UDP : ENABLED
SIP User Agent for TCP : ENABLED
SIP User Agent for TLS over TCP : ENABLED
SIP User Agent bind status(signaling): ENABLED 10.10.10.5 <- fa0/0 IP address
SIP User Agent bind status(media): ENABLED 10.10.10.5 <- fa0/0 IP address
SIP early-media for 180 responses with SDP: ENABLED
SIP max-forwards : 70
SIP DNS SRV version: 2 (rfc 2782)
NAT Settings for the SIP-UA
Role in SDP: NONE
Check media source packets: DISABLED
Maximum duration for a telephone-event in NOTIFYs: 2000 ms
SIP support for ISDN SUSPEND/RESUME: ENABLED
Redirection (3xx) message handling: ENABLED
Reason Header will override Response/Request Codes: DISABLED
Out-of-dialog Refer: DISABLED
Presence support is DISABLED
SDP application configuration:
Version line (v=) required
Owner line (o=) required
Timespec line (t=) required
Media supported: audio image
Network types supported: IN
Address types supported: IP4
Transport types supported: RTP/AVP udptl

All Incoming calls are 'Unknown'

About 6 days ago all my incoming calls are coming in as 'Unknown'. Also my phone calls to my friends/relatives were showing up as 'blocked' or 'private'.
I was on the phone with at&t and they said all my settings were fine. They put me through to apple support and we did a reset of settings on my phone and that resolved my outgoing calls as showing up as 'Blocked/Private' but STILL all my incoming calls are showing up as 'Unknown'. VERY frustrating. What is weird though all my incoming text messages know the name of the contact...why would this not work for phonecalls. ANY suggestions at all on how to resolve? I really don't want to have to try and reset all my default settings again on my phone, but if another attempt at that is suggested I guess I'll try. Please advise.

I have a similar problem although it's only with some numbers showing up as "Unknown". I went to the local Apple store and a busy Genius said it ws an AT&T problem. So I spent an hour on the phone with an real good AT&T tech. 866-700-2105 gets you right to iPhone tech support. He said it was a iPhone issue. So I made an appointment with a Genius. We put my SIM card in a new phone - same problem. I had a person call, whose number shows up as Unknown on my phone call the Genius'iPhone. Caller ID shows the number. So we think it's my SIM card. Off to the AT&T store for a new SIM card. With a new card - same old problem. The ball is back in AT&T's court. I bet you thought there would be a solution here. Sorry.

All my incoming calls are coming up as unknown, even though they are not blocked?

All my incoming calls are coming up as unknown, even though they are not blocked? Any help much appreciated!

We didnt Still happens to some numbers!

Incoming calls are being blocked

Some of my incoming calls are being blocked and when I try to answer them they go to voicemail. I can't seem to find a reason for this and I have not found a way to stop this from happening. Sorry I have a iPhone4 with the latest software and firmware.
Thank you
Regards
dennisl

Either the tower you are connected to has no channels available, the MTSO it connects to is overloaded, or you have 3G turned off or it isn't available where you are located. While 3G supports simultaneous voice and data EDGE does not, and data takes precedence. So if you are using data at the time someone calls you the call will be diverted to voicemail.

Iphone 4S; Phone & audio piece; Incoming calls are NOT routed automatically??

When I dial out; no problem the calls automatically goes through ear pice.
When I get incomming calls the call goes to phone, not even to the speaker in in the phone. So I have to
1.Slide the bar (then first realizing (again) dam: I hear nothing)
2. Choose the box for speaker options
3. Choose my blue ant piece..
By then some callers think I am not picking up or there is somthing wrong..!
My 3 colleaguers have same phone and no such problems. We are at a loss and I could not find reply in community groups. There was note about Iphone 5 and not correcting to Car speaker automatically. This was noted as a softwre issue Apple might address in next version. But since my colleagues do not have problem with their Iphone it must be either my settings or a weird fault with my phone.
One of my collegues have same ear pice as me, so the issueis not that either.
Is there some weird setting I need to fix to correct the problem?
Thank you

Are you able to make calls? I would try a couple different things -
1. Try doing a double hard reset - Press and hold home button and the sleep wake button at the same time until the screen displays the slide to shut down red button. Continue pressing and holding both the buttons until the screen goes black and then the apple logo flashes up. Continue pressing and holding both the home and sleep wake button beyond this point until the screen goes black again. At this point, let go of the home button and press once the sleep wake button as you would to start your phone. See if this double hard reset helps clear out any cache.
2. If this fails, I would try restoring the phone as a new phone in iTunes. Backup your phone before this so that you dont lose your contacts, etc. You can do a couple test calls once the firmware is installed before setting up the phone, data, apps, etc. If it looks good, try restoring your phone from an earlier backup.
If everything fails, call AppleCare or see a Genius in the store.

Incoming calls are not finding contact records

I just upgraded phones from a 3GS to a 4S. The contact records transferred over and call history did as well.
But the call history and incoming calls only show the number, they do not show the contact information. In the contact record, the phone numbers are missing the phone formatting, the () around the area code, etc.
I tried opening the record and saving it to see if it would add the formatting. It didn't. I really don't want to type in each phone number again.
Any ideas?
Thanks in advance

Hi Andy,
I just resolved this problem and I think I have the fix for you. First, when you upgraded from the 3GS to the 4S, did you switch carriers (from AT&T to Verizon for example)? I did and had the same problem you are experiencing. Here is the fix:
1. If you are using Verizon, open the Phone app and dial *228. You will be connected with Verizon's programming system. When prompted, press "1" for "Program or Activate Your Phone".
2. You will have to wait listening to music while the system upgrades your programming. Wait until the system says something like "Your settings or programming have been updated". Then disconnect the call.
3. Open the iPhone Task Manager (double tap the "Home" button). Make sure that you see the Message, Phone and Contact applications. If you don't see one of those apps, go back and open them in the main menu screen.
4. In the Task Manager, press your finger on one of those three apps (Contacts, Phone, Messages) until all the apps start to jiggle. Delete the Messages, Contacts and Phone apps (don't worry, they are still on your phone).
5. Wait about three minutes, then go back to the Main Menu screen and open the Messages app. Everything should be fine. As it will be in the Contacts app.
That's it! Worked for me. Hope for the same with you.
Stefan

My incoming calls are very quiet

Just got an iPhone and noticed that my incoming/outgoing calls are really quiet. My 'ringer' is turned up to the max, but don't where to look or what to change. Need help please.

Please correct me if I'm wrong, did you mean the analog phone connected on your SPA is not ringing when there's an incoming call ? If your answer is yes , try changing the analog phone connected to it to isolate the problem properly. In some cases , you will be needing to change the ring wave form on the SPA just like the one stated here

SPA122 FW upgraded to 1.2.1 (004) now all incoming calls are droped

I upgraded my SPA122 to Version 1.2.1 (004) and Now all my incoming (inbound) calls are dropped "Status: 480 Temporarily Not available"
Outbound calls are working Ok.
With the same config and with FW 1.1.0 (011) all was working Fine.
Is there any way to donwgrade to the previous "working" FW version ?

I'm sorry, don't want be rude, but i can't post my config on a public forum.
I just want a "Working" way (Not the ones listed on admin guide) to Downgrade the FW to the previous "Working Good" version.
Thanks for your interest in my Problem.
Attached the "debug Log" from the SPA122

Inbound calls getting answered automatically in Cisco CME

Hi All....
Please advise me the reason, why the inbound calls to CME got answered automatically.?
I am mentioning the call handling scenario here with..
Trunk Type : FXO
Connection PLAR to physical extension(200)
timeouts call-disconnect 1
timeouts wait-release 1
voice-port 0/0/0
trunk-group FXO
cptone AE
timeouts call-disconnect 1
timeouts wait-release 1
connection plar 200
caller-id enable
More over I tried with the below configuration also!!!!!!!!!!!! Bad luck !!
voice class custom-cptone UAE-TONE
dualtone disconnect
frequency 400
cadence 400 350 225 525
voice-port 0/1/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone UAE-TONE
timeouts call-disconnect 1
timeouts wait-release 1
dial-peer voice 202 pots
incoming called-number .
direct-inward-dial

The command connection plar 200 under voice port 0/0/0 directs the H323 gateway to automatically answer the inbound call on that FXO port and to attempt to transfer the call to DN 200.
If that is not what you want, then you need to remove the connection plar command and replace it with the command "secondary dialtone"

Lync 2010 Incoming calls are all Anonymous - RCC CUPS

We currently have an integration with Lync 2010 and a Cisco Cups.
Call control and presence are working fine, however it seems the Incoming Caller ID is not being passed to Lync. We can see the caller id on the Phone, but receive "Anonymous Caller is Calling you" on the Lync Toast.
Any ideas what I can check to troubleshoot this?

Hi,
Please make sure you have the normalization rule which converts the user's telephone number field from AD into the E.164 format.
Kent Huang
TechNet Community Support

Stratus incoming calls are blocked by Windows Firewall

Hello.
i have created a samll AIR application that can recive stratus incoming calls. the applications works fine however on windows 7 the firewall blocks all incoming calls (and the applications simply does not recive them with no spceial indication from windows on the block). when i add my application to the allowed progrmas in the firewall settings everthing works fine. the problom is that i want that many users will install my application.
how can i add the application to the allowed firewall programs (on windows 7) automatically during the applications instaltion (i created the instaltion using the "Export Relese Build" in the Flash builder).
Thanks in advance.

Hi,
This issue is more related with Visual C#, you could post in that forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support

SPA504G : Incoming calls are dead when picked up.

i have an issue with my voip system. it does not allow me to answer incoming calls .the phone is ringing but when pick it up it's dead. at the moment i have a Netgear router , ports 5060 and 10000-20000 are open .
there are few thing i did so far like turning off SIP ALG on the router and also reducing expiry time to 2 minutes ,but to no avail .
i also did following setting as NAT setting
Nat mapping enable:yes
keep NAT aliv enable:yes
Handle VIA received:yes
Insert VIA received:yes
Handle VIA rport:yes
Insert VIA rport:yes
Send Resp to Src port:yes
any thing else i can do to solve this out ?
Thanks,

Capture SIP packets and syslog/debug messages related to incomming call
Then we can analyze the problem.

Incoming calls are answered automatically

Similar Messages

Maybe you are looking for