Incoming calls do not come thru

when dialing my skype phon enumebr I get a message that says " the number you are calling is not in service, please check the number and try the call again" why is this happening?

Please file with Customer Support.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

Incoming calls are not ringing or activating the "...

As stated in the subject box. Incoming calls do not ring. Also the text box indicating incoming calls does not show up on the screen either. The only way I know a call has come in is when it goes to voice mail.

Ever since iOS5 the ringer and display does not work. No notifications.
I live in a gated community and the gate is assigned to my Skype number. I also have clients who call me and they aren't getting through.
If I have to purchase a land line, I will sue in small claims for the cost of the service and loss of service.
Do not waste anyone's time with cookie-cutter answers.
My Skype isn't ringing nor shows up on the screen ever since iOS5. You should have been working on this with the developer packs.
I've deleted and reinstalled 3x. It is running. Volume is correct.
This is outrageous as I pay for Skype and am thinking of canceling and demanding a full refund.
You are pushing things towards class litigation here in the US. There is no excuse.
Microsoft now owns Skype. They are a US corporation and are liable.
iPhone4
iOS5
Skype 3.5.117(3.5.0.117)
Notifications: Sound ON Alerts ON
Volume is at 100%
Ringer is at 100%

Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

Personal rant, why do people write the entire problem in topic line
It's not possible with Windows Phone 8. What's the point, a call is coming in and the phone allows you to answer.

How come the item value does not come thru via PL/SQL anonymous block?

Hi,
It's a Form with 3 tables -
1) ClinicianProfileTb (with about 40 columns, insert/update via DML),
2) PeopleTb (with about 7 columns, insert/update via PL/SQL anonymous block) and
3) ClinicianPracticeTb (with about 10 columns, insert/update via PL/SQL anonymous block) for after-submit-processes.
So I have several After-Submit-Processes. For some reason, it appears that PeopleId which is supposed to come thru via the 2nd After-Submit-Process (ie: Insert/Update PeopleTb) does not do the way it's supposed to. And when I press "Create" button at the bottom, I got the following error msg:
ORA-01400: cannot insert NULL into ("TEST_0712"."CLINICIANPRACTICETB"."PEOPLEID")
I tried the "debug" mode (via edit page link), but to no avail. (I'm newbie, trying to learn and deliver at the same time :)).
I uploaded the app to apex.oracle.com, if someone could kindly take a look and let me know what goes wrong, it'd be greatly appreciated.
workspace: test_0712
app: 43408 - TEST
user: demo
pswd: demoPswd
Page#21 -> look at the After-Submit-Processes -> in "Insert/Update PeopleTb" it appears that PeopeId does not come thru; thus it cannot be updated to ClinicianProfileTb.PeopleId (allows null) -> and thus cannot be inserted into ClincianPracticeTb.PeopleId (which does NOT allow null). Basically my logic is that in order to create ANY row in ClinicianPracticeTb, BOTH PracticeId AND PeopleId must be present.
Acutally I should have used the PeopeTb as DML (as the driving table) to enforce that PeopleId must be present in order to insert ClinicianProfileTb and ClinicianPracticeTb, but it'd be lots of codes to write to insert/update in ClinicianProfileTb (40 columns).
In addition, does ApEx consider EVERY SINGLE after-submit-process are in ONE transaction for commit/rollback? It appears that it treats all PL/SQL anonymous blocks are in ONE transaction, while Automatic Row Processing (DML) is commited/rolled back on its own?
Thanks much,
Helen

All blocks that do not commit in one of the ways I detailed (and which do not explicitly commit using a commit statement) are part of the transaction started with > the first DML statement issued in any of the page processes and continuing until a commit is issued.Say, there are the following processes in the After-Submit-Processes:
1. Process1 -> Automatic Row Processing (DML)
2. Process2 -> PL/SQL anonymous block
3. Process3 -> PL/SQL anonymous block
Based on what you describe, in the event that if there is no explicit "commit" issued in any of these processes, then an implicit "commit" will be issued at the end of Process3?
Thanks, Scott.
Doreen

HT201401 Incoming calls do not ring on iPhone, only vibrate. All settings are selected for ringtone to be audible, I have restarted phone, went back to factory settings, still no sound on incoming calls.

Incoming calls are not heard, only vibrate. I have reset the phone back to factory settings and still do not get any ring tone sounds for any incoming calls. The phone only vibrates. I have checked all setting including volume and do not get any sounds from the phone on incoming calls.

Check the Mute / Silent Switch on the side of the phone...
iPhone User Guide

Skype numbers are BROKEN incoming calls do not rin...

I paid for a Skype number. It used to work fine, people would call, and Skype would play the ringtone and I would answer.
NOW IT'S BROKEN.
One of the latest releases of Skype broke this and there is no Skype support to report and get problems fixed. This is mentioned many times in these forums and Skype will not address the issue. Just search for "incoming calls do not ring"

I am having this issue with an iphone 5/iOS 6. I can receive calls without issue when I have the Skype App open, but if it is in the background, the caller gets a message like "The person you are trying to reach is not available." if voice mail is turned on, or the phone just rings and rings if I have voice mail turned off.
I've confirmed that alerts and other settings in Notification Center are setup as expected. Not sure why this isn't working.

Calls are not getting thru in Cisco voice GW for a particular Number

Cisco gateway is connecte to a PBX with an Qsig interface, for a particualr destination number the calls are not gettin estabilished.
the output of the Q931 debug :
Aug 16 16:17:46.145: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x7E05
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98396
                Exclusive, Channel 22
        Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
        Facility i = 0x9FAA068001008201008B0100A11D0202010002010080144E455453202
F204C4F4E472044495354414E4345
        Calling Party Number i = 0x2183, '8168911010'
                Plan:ISDN, Type:National
        Called Party Number i = 0x89, '18553808521'
                Plan:Private, Type:Unknown
        Sending Complete
Aug 16 16:17:46.149: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0xF
E05
        Channel ID i = 0xA98396
                Exclusive, Channel 22
Aug 16 16:17:55.709: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x
FE05
        Cause i = 0x80BF - Service/option not available, unspecified
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x7E0
5
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref =
0xFE05
The Qsig and dial-peer configration :
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vad
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vad

Hi Raj,
My name is Edson Pineiro, I understand that your problem description is in regards to failed incoming calls from a qsig trunk.
According to the received q931 setup message I can see the called party number is 18553808521 and as so the gateway should route the dnis based on the best match in destination-pattern. My first suggestion would be to ensure your outgoing dial-peers has a matching destination-pattern that matches the dialed number, for example:
dial-peer voice 1 voip
destination-pattern 1T
The T is a wild card for any digit any length
Or you can be very specific.
dial-peer voice 1 voip
destinaton-pattern 18553808521
The next suggestion would be to ensure that your incoming pots dial-peers contains 'direct-inward dial'. This is so that you don't receive secondary dial tone when dialing in, which I don't think is happening here.
Another suggestion would be to remove 'isdn overlap-receiving' from interface serial 0/0/0:23. Reason being is that the DNIS received is enbloc and not overlapping. You can clearly see that the complete e164 number is received within the setup and no further digits are needed.
But overall the disconnect cause code is 0x80BF the 80 portion is related to the source of the disconnect which is the router and BF "Service/option not available, unspecified" which is described as:
The network or remote equipment cannot provide the service option that the user requests, due to an unspecified reason. A subscription problem can cause this issue.
Any ways seems like the router does not support the protocol or type of message included in the Setup. After decoding one of the facility message:
        Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
decode -->
Facility IE first byte (protocol profile): 0x9f(Network Extentions), depends on Network Protocol Profile
**Note:
**0x91/0x9f both be used by older qsig spec, including:
**ISO 11582:1995, ETSI 300 239:1993/1995
**newer qsig spec use 0x9f only, including:
**ISO 11582:1995/Cor.1:1999, ECMA 165(4th), ETSI 300 239:2003
**see CSCeb58118 for CCM compatibility issue
NetworkFacilityExtension ::= {
sourceEntity: 0
destinationEntity: 0
NetworkProtocolProfile not present
APDU is a ROSE
0
DivertingLegInformation2Invoke ::= {
invokeID: 1793
operationValue: 21
argument: DivertingLegInformation2Arg ::= {
diversionCounter: 1
diversionReason: 1
originalDiversionReason: 1
divertingNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
originalCalledNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
redirectingName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
originalCalledName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
Looks like this is a redirected call (call forward or transfer), the redireted number is "50005998" and the other end of the PRI maybe attempting to do either a 2 B channel transfer or B channel optimization, which is not supported certain gateways or needs the use of a tcl scripts. Any ways is it possible to confirm if such features are enabled on the other end of the qsig trunk? and what the number 50005998 is assigned too. This may warrant a TAC case.
However please ensure your carry through the first three configuration changes before looking at the possible bad facility message.
Here are some good documents on ISDN, IOS dial-peers and call legs:
Understanding debug isdn q931 Disconnect Cause Codes
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml
Configuring Telephony Call-Redirect Features
Two B-Channel Transfer
http://www.cisco.com/en/US/docs/ios/voice/ivr/pre12.3_14_t/configuration/guide/ivrapp.pdf
Understanding Dial Peers and Call Legs on Cisco IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
Understanding Direct-Inward-Dial (DID) on IOS Voice Digital (T1/E1) Interfaces
http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00801142f8.shtml
Understanding Inbound and Outbound Dial Peers Matching on IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#prereq
Voice Translation Rules
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Let me know how you go.
Thanks again for asking the tuff questions.
Cheers
Edson

After the last update - calls do not come through

Hi,
my fiancee and I both have a Samsung Fascinate. In recent weeks we are having problems receiving calls from each other. I do not receive his calls and he doesn't receive mine, yet the person who is calling can hear the phone ring at the end of the line and it will go to VM after a certain number of rings just like it would normally. Yet the calls never ring through to the receiving party. WHY? Text messaging seems to be working normal between us, but the phone situation is ridiculous. We noticed that this all started after this last update that was automatically installed on our phones.. We compare phone logs all the time and we can clearly see where the other person has called, but neither of us ever receives those phone calls. Other calls seems to come through just fine and I can call his ATT Blackberry and it will ring right in. It seems to be a Samsung Fascinate Issue?????? Can anyone help with this?? It's really making us mad not being able to get a hold of the other one when needed.

There are two other threads already on this they explain what is happening and how to check if this is your problem
here is a links to them
http://community.vzw.com/t5/Samsung-Fascinate/Phone-not-receiving-calls-during-Sleep-mode/td-p/544104
http://community.vzw.com/t5/Samsung-Fascinate/Incoming-calls-not-coming-through/td-p/516862

For incoming calls ringtone not working

My incoming calls are only identifiable with display to ANSWER or DECLINE. I. Can get vibrate to work but ringtones not working. I am missing many calls
because of no ring. I did shut down my Bluetooth earpiece so unsure what happened.

These are a couple of articles that might help.
http://docs.info.apple.com/article.html?artnum=305740
http://docs.info.apple.com/article.html?artnum=305744
Try a reset first then if that does not work, you might want to restore.

About 1/4 of all incoming calls are not connecting

Using 3G or Edge (with full signal), I am experiencing a problem with one of every few incoming calls. The phone rings but when I answer it, I only hear my own echo, if anything at all. When the person calls back (or I beat them to the punch), they say that my phone didn't even ring so they hung just up and redialed or, in some cases, answered my call if I called them back.
I've got version 2.1 and everything else seems to be working fine. Any ideas?

Hi Jay,
Are you using any accessories with the iPhone? Do you see the issue when not using bluetooth headset, car kit, stereo headset, protective case?
Does the iPhone have the same issue in all locations?
If you haven't already try to reset the iPhone. http://docs.info.apple.com/article.html?artnum=305743
You can also restore the iPhone and set it up as a new phone. http://docs.info.apple.com/article.html?artnum=305744
Jason

Nokia 2700 - Incoming Call Number not displaying!!...

When an incoming call comes, the number does not get displayed..
Where is the setting change option for this??

check with your operator that caller id is turned on or update your sim card
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Iphone 4S; Phone & audio piece; Incoming calls are NOT routed automatically??

When I dial out; no problem the calls automatically goes through ear pice.
When I get incomming calls the call goes to phone, not even to the speaker in in the phone. So I have to
1.Slide the bar (then first realizing (again) dam: I hear nothing)
2. Choose the box for speaker options
3. Choose my blue ant piece..
By then some callers think I am not picking up or there is somthing wrong..!
My 3 colleaguers have same phone and no such problems. We are at a loss and I could not find reply in community groups. There was note about Iphone 5 and not correcting to Car speaker automatically. This was noted as a softwre issue Apple might address in next version. But since my colleagues do not have problem with their Iphone it must be either my settings or a weird fault with my phone.
One of my collegues have same ear pice as me, so the issueis not that either.
Is there some weird setting I need to fix to correct the problem?
Thank you

Are you able to make calls? I would try a couple different things -
1. Try doing a double hard reset - Press and hold home button and the sleep wake button at the same time until the screen displays the slide to shut down red button. Continue pressing and holding both the buttons until the screen goes black and then the apple logo flashes up. Continue pressing and holding both the home and sleep wake button beyond this point until the screen goes black again. At this point, let go of the home button and press once the sleep wake button as you would to start your phone. See if this double hard reset helps clear out any cache.
2. If this fails, I would try restoring the phone as a new phone in iTunes. Backup your phone before this so that you dont lose your contacts, etc. You can do a couple test calls once the firmware is installed before setting up the phone, data, apps, etc. If it looks good, try restoring your phone from an earlier backup.
If everything fails, call AppleCare or see a Genius in the store.

IPhone 5 outgoing and incoming SMS works but incoming calls do not work. The dialler gets message this number is not in available in network.

New I phone outgoing calls as well incoming SMS works but can not receive incoming calls. Caller gets the number does not exist in network.

Like Superman, here I am to save the day! I can help you with your service in your home area dizzymslizzie. Let's start with what zip code are you in? Can I assume that there isn't any physical or liquid damage on the iPhone 5? Recently, there has been an update to the iPhone to iOS 7. If you have done this update then please provide the exact carrier version that's installed. Keep in mind that there is a difference in device performance between iOS 7 and the iOS 7 beta version. As you share this info, I will check the area to re-affirm that the issue is or is not network related.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Incoming calls do not display contacts # TYPE (work, mobile,etc)

I am a verizon carrier and I recently upgraded from a curve to a tour 9630. I am on a business enterprise server that syncs with my outlook. On my old curve and other BB's, when I would receive a call from someone in my address book, the screen would display: the person's name, their number, and in parentheses- what contact number that was, ex: (work) (mobile), etc.. These are all still listed in my outlook and blackberry address book correctly. Now on my tour, on incoming calls from individuals in my address book, it only lists their name and number. The parentheses that listed what contact type their number was, has dissapeared and since I don't memorize #'s anymore, I dont know where they're calling from. Is this a glitch or a removed feature on the Tour? Or is it a setting that I can't find?

I have the same issue...not sure if my upgrade to BB OS 5.0 solved it.
It now shows # type when I answer the phone and on the call log screen.
Try seeing if #type is displayed once you answer the phone...If not Upgrade
Cheers
K

Incoming calls do not come thru

Similar Messages

Maybe you are looking for