Incoming email doesn't work after changing to iCloud

After changing to iCloud, my email cannot receive mail any more, but I can still send.

Hello,
I understand, we need to know what version of Mac OS X your PowerBook is running in order to assist you.
If you don't know you can go to the Apple logo on the top left and click 'About This Mac'
It will tell you what Mac version your PowerBook is running, for example Mac OS X 10.4
When you say emails icon, do you also mean the 'Mail' that has the icon as a stamp?

Similar Messages

HTML eMail no longer works after change from 8100 to 8310

Hello all,
I have a Pearl 8100, which I upgraded successfully to version 4.5. Then I could receive and read HTML eMail, very nice.
Now I got a Curve 8310 which I also upgraded to 4.5 supporting HTML eMail. In BIS I changed the PIN and IMEI numbers and the new device was registered.
Now when I set eMail format to HTML and receive an HTML eMail, it only shows some lines (in nice new HTML) or even nothing and a hint, that more data is available with the number of bytes left. If I select the "More" option on the device, a transfer of data starts, showing that the Curve receives more data. Then the More-Data-Hint shows that only still one byte more is available, but the message still looks the same, showing only the first lines or even nothing. Repeating getting more data does not help. Seems the device has some problem parsing the data.
What I already tried:
- Hard reset of the device
- Delete all service books
- Resend service books from BIS
- Enable/Disable HTML mail on device
None of them helped.
Network is German Vodafone. Both devices (Pearl and Curve) run Vodafone software.
By the way: If I switch to text mode, I can see the whole message, but of course unformatted in the old format. Switching back to HTML again shows only part of the message or nothing.
Does anyone have an idea what happened? Or who can I ask? There is no support hotline for private people on blackberry site.
Thanks in advance.
Joerg.
Solved!
Go to Solution.

You can't delete the whole account, just the BIS email accounts.
In this order, After deleting them, also delete the service books on your BB.
Reboot the BB, (battery out, replace and reboot).
Look and confirm the SBs are gone.
Now, reset up the email accounts in the BIS, and send the SBs again if needed.
You should get new registration messages on the BB... and you might need to do a battery bpull reboot again.
This process, in this order, will assure you get the NEW service books, rather than just writing over old ones.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wrt300n- wireless doesn't work after changing default IP scheme

When I change the 192.168.1.0 default network scheme my wireless connection doesn't work to the internet I can get to the router's configuration ( I need to change for VPN reasons) The LAN connections work fine. Any ideas or settings that I can look at.

Reset your router by holding down the reset button on the back for 30 sec. This should get you on the net but you will need to configure your router wireless settings to secure it. Good Luck!

IMessage doesn't work after changing the sim. New number isn't even recognised.

I changed my sim from a German to a French one and the card is already active and calls are possible, but iMessage doesn't work. The new number is not recognised and iMessage cannot be activated.
I tried to switch it off and and and I reset the network, but nothing. I even removed the card a few times, but no change.
How can I make it work?

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Mail not working after change to iCloud

I have changed to iCloud from Mobile Me and iCloud insists that my password or ID is incorrect. It isn't incorrect - so what do I do get some sense out of Mail (because I have and old workhorse that does all the mail, and has a huge library of mail that is preserved). That means that at the moment I can't get or view my mail. I have done as advised - ie set up Mail to go to iCloud using the correct incoming and outgoing servers, but no luck.
Summary: Changed to iCloud. Access denied in Mail. I don't expect the full features of iCloud (our other machine can do that if we need it because it has Lion - bu that's not my machine).

I don't know whether the server was down, but clearly changing my passwords to 8 digit, at least one upper case and one number, helped - both accounts working once I had tracked down how to get a 10.5 machine and and iPod Touch connected, which isn't dealt with at all well by Apple. But it's all possible - you don't get the rest of iCloud, but you do get emails and stuff.

HP Printer doesn't work after changing computers

After a recent change to a new ASUS computer running Windows 7, I cannot get the Deskjet to print. It was working perfectly before the changeover. I have downloaded HP Print and Scan Doctor. I am told that the driver is already in the Windows 7 software, however the Doctor reports that " the full software solution for your product is not installed on this computer".
I have tried disconnecting and reconnecting the USB link, but with no success. (he USB cable is linked via a cord-mounted
25 pinDIP connector to the Deskjet.
It seems that no communication is happening between computer and printer.
I'd much appreciate some helpful comment!
Thanks
Rodney

Thank you for your question re my DeskJet710C printing problem.
Yes there is a problem listed in my Device Manager Universal Serial Bus Controllers.
It mentions an Unknown Device with Port_#0002.Hub_#0004. It says no driver files are loaded or have been required for this device. I have tried changing this Port to 0001 without success.
There is a similar port called USB Printing Support listed with the Device Manager, giving a Driver File:
C:\Windows\System 32\DRIVERS\usbprint.sys ..... but this doesn't seem to exist on my current system.
I have tried downloading it from the net, but without success - I guess it needs installing on the Registry (?).
Should I use something like RegCure to get this installed?
Many thanks
Rodney

Touchpad doesn't work after changing from Vista to XP Satellite A210

Hi everybody!
I have changed Windows and now something is wrong with Touchpad. It works only as a mouse (cursor moves, right and left buttons are also ok).
Before with Vista I had email button, wireless connection, something else and sound changing, and plus it had extra blue light. Now these buttons are not active and no etrxa light.
Laptop Satellite A210.
I've tried all possible drivers already but maybe you could advice me something else.
thanks in advance!

please try this one
http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20070809133247.zip
and give us feedback if this driver helps or not
thx

Firefox doesn't work after changing networks.

I take my laptop to work and use it at home, with different networks (VPN at home) and I always put my laptop to sleep. The firefox window doesn't update when I switch networks and if I refresh, it keeps uploading and eventually says "timed out". I have to restart firefox to make it work.

See --> [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading to Firefox]
Links to instructions for settings for '''''McAfee Internet Security 2009 or 2010''''' and '''''McAfee Security Center (McAfee Total Protection, McAfee AntiVirus, or McAfee Internet Security 2011)''''' can be found on this page (scroll down to list of firewall applications) --> [[Firewalls]]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

3D Doesn't work after changing the LCD Screen

Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen.
The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had.
everything works fine the resolution, the camera but when it comes the 3D it doesnt work the Leds on the web camera doesn't turn on and activate the wiggle stereoscopy.
How can i activate again the 3D or Where is the problem?
Thanks.

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Filter button doesn't work after changing worksheet name

I am using Bex 7.10. I have a workbook with 2 queries. I want to change the name on the Tab for each sheet but when I do that the Filter and Information buttons no longer work. Is there a way to do this?

Check in the Design mode and right click on the Filter tab and check do you see all the filters listed?
If not you can reinsert the query to a new workbook and try.
@AK

SD Override doesn't work after changing the channel

I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

My iphone doesn't work after changing cards from us to polish ones

Hi, I've got a problem. I took my iphone 5s from usa to poland i put polish card and everything was ok but then i changed cards twice and my iphone is blocked now. It says it is not the fault of the phone but i should install the card SIM which is serving but when i put an American card it is also the same i hope you can help me to deal with it.

Hello emilcia,
Thanks for using Apple Support Communities.
Did you unlock your iPhone? The following support article explains about the process of unlocking:
iPhone: About unlocking
http://support.apple.com/kb/HT5014
Take care,
Alex H.

HT4759 updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Incoming email doesn't work after changing to iCloud

Similar Messages

Maybe you are looking for