Incoming email from UNIX system not working

Hi,
I have a weird issue with incomoing email in my SP2010 farm.
All is working well except for email being sent from a UNIX box.
We've enabled a list to receive emails.
When sending a mail from Outlook it is working fine, the email ends up in the SP list.
When sending a mail from the UNIX machine the email is never delivered to the list.
The list is configured to accept emails from any sender.
Any thought is welcome, I don't really know where to look for this.
Thanks

Hi,
Please make sure you have set the library to receive message from any sender.
Then please check the links below and see if you could find any related error message:
http://technet.microsoft.com/en-us/library/ff453924(v=office.14).aspx
http://blogs.msdn.com/b/george_bethanis/archive/2012/05/25/sps2010-cannot-send-incoming-emails-to-lists-libraries.aspx
https://hosting.intermedia.net/support/kb/default.asp?id=2040
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

Scan to Email from VPN sites not working on Exchange 2010

Hi,
       I have Exchange 2010 SP1 with HCAS array installed in the organization. We have site offices connected through site to site VPN. All our outlook clients are working fine in the sites. We have MFP printers in both Head
office and site offices. HO scanners are working fine for Scan to email (Internal recepients), but site offices scanners are able to send the email without any attachment. We have tried creating new receive connectors for the scanner with anonymous authentication,
but still attachments were not receiving. Log found in the printer as shown below.
1 page(s)
Document Size:A4
Subject:Scanned File from SS AUH Printer
E-mail Destination(s)
to: [email protected] (Success)
E-mail processed by the Device
File format: pdf (color)
File Size:0
I have configured Valid mailbox as the SMTP authentication and from Address for the scanner and the User received the following delivery failure report
******* HP Digital Sending: Delivery Error *****
The following job has not been delivered. Please retry sending the job. If the problem continues contact your network administrator.
----- Transcript/error-code of session follows -----
0/33 (0X21)
Kindly advice.
Regards,
Emthias
With Regards, Emthias Abdulsalam

Hi
   >>HO scanners are working fine for Scan to email (Internal recepients), but site offices scanners are able to send the email without any attachment. We have tried creating new receive connectors for the scanner with
anonymous authentication, but still attachments were not receiving.
    I have question about these sentences. If I misunderstand your saying, please correct me.
    1. Have scanners function to send email to exchange system?
        Did you test it before?
Do you try to send email to another account like (windows live,yahoo)?
    2. According to your error log, it seems to be network configuration problem.
        Do you modify network configuration of scanner?
    3. Can you check transport rule of your server?
You can read this
article. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Emails from contact form not working

I have a contact form on one of my website and it is not working properly.
Muse gives me a warning of not using another email than connected to the domain of the web.
As I use Gmail in this particular website it is not working.
How to solve this?
Thanks
Pétur

Hi,
I have and they told me they use SMTP authentication for their incoming emails.
They also tried to work on Muse PHP code for me - but did not manage to configure it correctly for emails through SMTP from forms in Adobe Muse.
The problem is that I have a customer that is not receiving any inquiries from his customers because the form on his website is not working.
Do I have to use Businesscatalyst - is it alright there to use Gmail to send emails from forms hosted there?
Hope you have some solution - I have to solve this
Reg.
Pétur

Incoming email setting for Calendar not working

Hello -
I want to be able to send a meeting request from Outlook and have it show up on my SharePoint calendar.
I followed the steps in this link to configure email for a 2013 farm:
https://technet.microsoft.com/en-us/library/cc262947.aspx
Basically I installed the SMTP server on my SP web server and configured the relay to accept all.     In Central admin, I enabled incoming email using Automatic mode. and set it to accept mail from all e-mail servers.
My SharePoint site is http://sharepointdev.   SharePoint server is SPDEV1.     Maybe I am not setting my email server display address correctly? I have that set up as <mylist>@sharepointdev1.com   (I don't
think it matters what you call it here).
I have also verified that under the Calendar list setting, under Communications > Incoming email settings, it is allowed to accept incoming email. The email to use is <[email protected]
When I send the meeting invite, I get an outlook undeliverable on the above email. Details are:
Remote Server returned '550 5.7.0 Proxy session setup failed on Frontend with '554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain''
I must be missing a step somewhere.   Any other suggestions?   I've tried everything in the links below. thanks
https://support.office.com/en-in/article/Enable-and-configure-e-mail-support-for-a-list-or-library-dcaf44a0-1d9b-451a-84c7-6c52e7db908e
https://social.technet.microsoft.com/Forums/en-US/8d767ef4-ba8f-47a4-9fa9-bb0115092079/can-i-configure-incoming-email-to-a-calendar-in-sharepoint-online-2013?forum=sharepointgeneral

Hi XRS,
Based on the error message, the email could not be routed correctly.
What environment did you send email to SharePoint list? Is it an internal environment or external external environment?
If it is internal environment, you need to make sure the domain is same with email address’s domain, and SharePoint server can parse the domain.
If it is external environment, the email address’s domain need to be a public domain, SharePoint server must have public IP and the domain for SharePoint server must have correct MX record to ensure email can be routed correctly
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Import email from apple mail not working

I have a simple applescript which imports emails from Apple Mail into filemaker
tell application "Mail"
          set theSelection to selection
          set theMessage to item 1 of theSelection
          content of theMessage
          set the clipboard to content of theMessage as text
end tell
This works in the Old Apple Mail in 10.6 but Lion changes everything doesnt it. This is not working in the new Mail 5.1. It will import the first message in the string but not the HIGHLIGHTED message which may be in the message string of 3 or 4. I want it to set theMessage contents of the highlighted message. Does anyone know how to select the highlighted message in a string - sometimes called the selected message. Thanks

Use and methodically follow the troubleshooting steps in Apple's OS X Mail: Troubleshooting sending and receiving email messages located at http://support.apple.com/kb/ts3276

Outgoing email from gmail account not working

emails sent from gmail on iphone dont work.
this is really getting annoying.
Its a brand new phone with fresh 2.1 firmware and new email accounts.
Also im using imap with gmail.
I checked with 2 gmail accounts and same thing along with the other threads regarding not receiving emails at regular intervals unless its plugged in.
Message was edited by: crosswire

waiting for a test
Just wondering if i should wipe the iphone completely n start from scratch with new fw2.1
dont think it would make much diff
any opinions

Consuming PI Webservice from Webdynpro Java Not working

Hello SAP,
Environment: CE 7.2.
Resolution expected immediately, Helpful answer is highly appreciated.
Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
Options tried so far:
1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
3) Changing the Business Systems in PI and there after calling the service - Not worked
4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
For all the Options, I am facing the same error which is provided in the screenshot.
Below procedure which I have followed for calling the PI Webservice:
1) Created Adaptive Webservice Model
2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
3) Selected Option - No Service Group Configuration
4) Provided Logical Destination
6) Completed creation of Model
7) Added the model as a UsedModel
8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
10) Build the project.
11) Activated the code and Run the Application.
12) Getting the below error which is showed in the message.
ERROR MESSAGE:
Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

Hi Sankar,
If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
Please check the code for initialization and execution for the webservice and then test it.
Best Regards,
Arun Jaiswal

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

Contact the email provider for assistance with their service.

Upgraded to Mountain Lion a week ago suddenly unable to receive incoming emails from Mail.6

Upgraded to Mountain Lion a week ago. Suddenly unable to receive incoming emails from Mail.6
Can successfully send outgoing messages.
Have completed following tasks to no avail:
1)          When click on "Take all accounts online" and entering password for gmail / looking at Mail Connection Doctor: Got Green light, Mail was able to connect to the Internet. But…
"Trying to log in to this Goggle Imap account failed. Verify username and password are correct."
I have verified username and password being correct.
2)          System Preferences > Mail, Contacts and Calendars typed in name, email address & gmail password and got this message.
"Unable to verify account name and password."
3)          Mail> preferences>account>password. Confirmed correct password, name, email address and imap "address" Then to Advanced & confirmed correct port . Restarted computer.
"lay person terms" appreciated.
Thanks!
Laila

Found solution, Yeay!   No coincidence. Mountain Lion (osx 10.8, upgraded) is not compatible with Gmail if one has 2-step verification set up on their gmail security settings.
There are 2 options to solving problem
1)   https://discussions.apple.com/message/19109209#19109209)
This will take you through the process to disable 2-step security feature on gmail security page. Thank You iPatA.
2)   http://support.google.com/accounts/bin/answer.py?hl=en&ctx=ch_b/0/SmsAuthConfig& answer=185833
This will take you through the process of assigning an "application specific password" to upgraded Mail 6.0 for successful communication between Mail 6.0 Mountain Lion while keeping a 2 step verification process if you prefer.
Thanks for you energy & effort rkaufmann87.
Sincerely, much appreciated.
I love this Apple community.

Incoming email from Muse website – point size

When my client receives a response from the Contact submission form on his website I constructed in Muse, it comes into his email in minuscule font size and is almost unreadable. He has tried changing the view to “largest” type size but that only alters the size of the heading, not the body text of the messages. Is there a way of controlling the point size of the text of the incoming email from Muse?

I posted this in someone else's question, but it answers the same problem. I just discovered this last night, so I'm hoping I can help other folks having the same issue!!
Question for you... do you use Outlook to retrieve your emails on a desktop PC? If so, then you're probably clearing the email server before your Treo can ping it & get your emails. I finally discovered this on my own after fighting with it for about 4 weeks. I use Outlook 2007, but would assume the path is somewhat the same for previous versions. Try this:
In Outlook, go to: Tools > Account Settings .. click on your email account & click "Change" .. click the "More Settings" button .. go to the Advanced tab .. click the button that says "Leave a copy of messages on the server", and then set the next option to "Remove from server after 2 days".
That did it for me. Hope it works for you!!
Cathy
Post relates to: Treo 755p (Sprint)

To stopping incoming Email from fake Name & Email Address

Hi,
I have a single host deployed sun messaging server on Solaris 10. Output of imsimta version is as below:
Sun Java(tm) System Messaging Server 7u2-7.02 32bit (built Apr 16 2009)
libimta.so 7u2-7.02 32bit (built 01:56:27, Apr 16 2009)
Using /opt/sun/comms/messaging/config/imta.cnf (compiled)
SunOS fe 5.10 Generic_120012-14 i86pc i386 i86pc
Please help me to stopping incoming Email from fake Name & Email Address.
Regards
Prem

pks2512 wrote:
Please help me to stopping incoming Email from fake Name & Email Address.What do you mean by a "fake Name"? Which email header field are you referring to, please provide examples and why you think they are "fake"?
What do you mean by a "fake Email Address"? Please provide examples of "fake" email addresses and point out how you know they are fake.
I should point out that the "From:" address is not designed to represent any kind of authoritative information i.e. it should never be relied upon to identify the sender of an email.
Regards,
Shane.

Transaction to view the incoming emails into SAP system

Hi Experts,
Just like SOST for viewing outgoing email from SAP, is there any transaction exist to view the incoming emails into SAP system. Any comments on this concept is most welcome.
Thanks in advance,
Viven

Check the T_codes in the package SO. All we have is in that package. I doubt except SAPoffice there is something. this should be handled by the Exchange server.
Amandeep

Deleting emails from Gmail does not delete them from BB

HI,
Just bought a brand new BB 8830 World Edition and using Gmail. Deleting emails from the BB works just fine and Gmail is being updated. But deleting emails from Gmail does not delete the corresponding email from the BB.
On the BB, there is an option "Mailbox and Handheld" that works just fine but there is no such thing on the Gmail options.
Is this a bug or a normal way of doing things? It would be quite abnormal to having to manually delete your emails on the BB that have already been deleted on Gmail; it's just deleting twice the same email.
I would be grateful to anyone who can provide an answer.
Regards.
Springtime.

You can delete mails from your handheld as well as from Gmail server which I guess solve the issue for you. To be able to do so check the following options -
Messages
Options
Email Reconciliation
Deelete On: Mailbox & handheld
In place of Mailbox & handheld you also select Deelete On: Prompt. This is will give prompt wheneve you'll delete any mail and give you options what to do.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Incoming emails from MS Outlook to SAP Inbox

We have configured SCOT and I can send emails from SAP to outlook.When I try to reply I could not see in SBWP user inbox.
We had discussion with network / exchange team they said no issues from them and they suggest us to check at SAP.Is there a settings I have to for Incoming emails from outlook to SAP Inbox.
- Jim

Hi,
Normally, its not recommended to configure incoming mails to SAP as it unnecessarily occupy space in DB. If your business demands it, then please refer the below help link and SAP note for configuring the same.
http://help.sap.com/saphelp_nw04/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Regards,
Sharath

Incoming email from UNIX system not working

Similar Messages

Maybe you are looking for